2011 GT500 SHIFTER BOOT has a plastic ring where the OEM shifter goes through the boot and it must be removed to accommodate the Flat and Wide Barton shifter arm.
@michaellocklear6402 ай бұрын
Needs update 2023
@breneshiadavis12 ай бұрын
Where can I buy a new slider block? mine is missing.
@tomwyatt14763 ай бұрын
I never cut any stiches, the boot is leather so I dipped the tip of the boot in Hot Water for a few minutes and had no problem sliding my Barton Pistol Grip in through the boot. Also used the packing wrap Barton shipped it in to protect my old shift knob. I have a 2021 Challenger SRT if interested. I love my new Barton much better than the old Mini Van knob that was there!
@Auto_Breve4 ай бұрын
This video was a tremendous help. Thanks!
@robvas4 ай бұрын
I could not get my bushing on to save my life - it was a solid piece and not cut in one spot like the one in the video, so I cut it and then it went on just as easy as it shows
@donaldduck84365 ай бұрын
Did you forget the part where you install it?
@borri686 ай бұрын
I was thinking of using a hurst T handle type shiftier. Was thinking one could cut the top of the lever off that has the flat spots and cut threads on the remaining round part of the shaft, this way you wouldn't be stuck using one type of knob and it would have a shorter throw.
@moddedmedia4157 ай бұрын
Welp I’ll be doing this
@DaveSmith-vi7lz7 ай бұрын
Looks like u can't go back to stock after this correct?
@herbertruiz509010 ай бұрын
How can I take off the adapter after installed?
@meirb561911 ай бұрын
So do you need to take the transmission out ,or is it possible to do it without?
@rafp4502 Жыл бұрын
Great video thank you. Going to make my install much easier.
@TheINCDexter Жыл бұрын
Dragon ball shift knob for automatic 5th gen would be nice
@sonyatipton7264 Жыл бұрын
Thank you SO MUCH for this video. Now I just need to find the adapter. Ordered a Hurst T handle knob from amazon. Had all kinds of fittings with it but none would fit my 2012 camaro. Now I just have to find the Barton adapter and I'm all set.
@crymalthief62315 ай бұрын
How did you find an adapter and knob that fit, I'm looking for my 2012 but I don't know how to tell if it'll fit
@bucketoftruthify Жыл бұрын
The plastic trim ring was by far the hardest most time consuming part of this. Had I known there are two barbs on the ring that hold it onto the knob, it would have been easier. I could see them in the hole, but brain did not engage until after flailing it off. Chewed up four or five harbor freight trim tools prying on that thing, but did not damage the boot. 6oz lighter than stock, I'm curious to see how it feels on the road.
@adambrown5317 Жыл бұрын
Is the process the same for the flat stick shifter, other than the pull up collar part?
@dekesdad684 Жыл бұрын
These are the sickest scorekeepers in all of Cornhole ❤
@nolmoo Жыл бұрын
Just used this as a guide on a 2022. Everything is basically the same except the center console bolts.
@Blakehenry11 Жыл бұрын
I like this setup much more so than the Speed dawg. I don't like how the boot on that one comes all the way up to the ball. My only gripe with this setup is that there is no jam nut to hold the ball in place or some sort of set screw. To me that would be much better than relying on Loctite.
@jeremycoolidge6430 Жыл бұрын
Any way you can send me the boot for this shifter. It wasnt in then box.
@musclecarsrt2324 Жыл бұрын
Is there any lube included or do you recommend any type of lube because it looks like metal on metal when sliding the shifter up and down? Thx
@benzlick Жыл бұрын
Have you guys made a video for the newer model Challengers yet? I have a 22 Scat Pack and just received the shifter by mail
@popodood2 жыл бұрын
hahaha i thought you edited in the 3 different adapter, they just popped up on screen. but then you picked one up lol it was like a magic trick
@Steve-yw7ic2 жыл бұрын
Perfect video. 20 minute installation.. thanks so much. Your adapter is great. One suggestion, please include a second zip tie for us old people. The first one got eaten between the seats and I had to tear my toolbox apart to find another. Great product!
@aspman972 жыл бұрын
How about an updated vid showing a newer Challenger?
@gml992 жыл бұрын
What size mm is the 2017 one?
@Infidel672 жыл бұрын
Daaamn Thank you for this
@ejsn41282 жыл бұрын
where can we order this adapter
@davelazaro8462 жыл бұрын
This turned out to be the best Barton install ever!! Thx for showing both install methods.
@eugenefierro64292 жыл бұрын
Do you lose the “auto stick “ in an automatic when you install this?
@crypto_112 жыл бұрын
U should’ve rotated the adapter first so that the shift knob wouldn’t need that glue
@camarofan96122 жыл бұрын
I see what you’re saying. Put the knob on the adapter first, and then adjust the pins where they need to be, then remove the knob, do the work, and it’ll line up 👍🏻
@Steve-yw7ic2 жыл бұрын
No big deal, the glue took 3 seconds. Easiest part!
@batcaveperformance2 жыл бұрын
Thanks so much for this video. I bought a 2018 GT that already had a Barton Hybrid 3 installed. I could never shift from 1st to 2nd under hard acceleration. I watched this and readjusted the base and my car shifts perfect now. I was about to take my car in for a warranty repair.
@OtherCoder62 жыл бұрын
Would this fit on the c6 corvette
@justinglebell2 жыл бұрын
Thankyou for making this video!
@REDNECK18162 жыл бұрын
You explain and show everything thank you bud keep it up
@robertsierecki14202 жыл бұрын
This is the dumbest f Ck video why don’t you have a install video like hurst does you dumbasses
@lacymartin6082 жыл бұрын
Where I can buy this adapter ?
@TheFast8042 жыл бұрын
Is dark colored shift considered black? I like the textured look.
@hammer39212 жыл бұрын
As much as would like to do this, I would totally fuck it up.
@soundretarded2 жыл бұрын
Best demo ever! Thank you!
@yeetyuhhh32093 жыл бұрын
Wtf can’t thread the linkage bolt
@chriskociolek18303 жыл бұрын
My kit came without the bolts required to mount the shifter arm to the assembly. What size screws are they?
@daffy_66323 жыл бұрын
How do you remove it, if need to?
@chriskociolek18303 жыл бұрын
What if I have no friend
@B5_Beast3043 жыл бұрын
Do you sell the automatic shifter adapter only for the 2019 Charger RT? Want to upgrade from factory but looking toward the speed dawg ball shifter.
@Fundabz3 жыл бұрын
What is that first set screw size at 6:50?
@streetslickz3 жыл бұрын
Does anyone have any knowledge on whether or not this will void your factory warranty?
@brianreiber23623 жыл бұрын
It's possible it will. But probably only the shifter. It should not void the power train or anything else. Know that if something goes wrong, the dealership has to prove the shifter caused the problem.
@streetslickz3 жыл бұрын
@@brianreiber2362 Got yah. I appreciate that info. I felt like that would be the case, so that is good to know. It may be a risk I am willing to take.
@brianreiber23623 жыл бұрын
@@streetslickz I've had the shifter on for 3 years without any issues. I did the install myself and I'm close to being handyman. You just need to remember to tell the next person that drives your car to push down on the shifter to release it from gea. Otherwise they won't know what to do and might start yanking on it.
@glockmodder3 жыл бұрын
to bad im not going to keep the old shifter plugged in thats STUPID AS FACK
@EVENMETAL3 жыл бұрын
I am kind of eyeing this up as to the MGW. I would love to see comparisons.
Пікірлер
2011 GT500 SHIFTER BOOT has a plastic ring where the OEM shifter goes through the boot and it must be removed to accommodate the Flat and Wide Barton shifter arm.
Needs update 2023
Where can I buy a new slider block? mine is missing.
I never cut any stiches, the boot is leather so I dipped the tip of the boot in Hot Water for a few minutes and had no problem sliding my Barton Pistol Grip in through the boot. Also used the packing wrap Barton shipped it in to protect my old shift knob. I have a 2021 Challenger SRT if interested. I love my new Barton much better than the old Mini Van knob that was there!
This video was a tremendous help. Thanks!
I could not get my bushing on to save my life - it was a solid piece and not cut in one spot like the one in the video, so I cut it and then it went on just as easy as it shows
Did you forget the part where you install it?
I was thinking of using a hurst T handle type shiftier. Was thinking one could cut the top of the lever off that has the flat spots and cut threads on the remaining round part of the shaft, this way you wouldn't be stuck using one type of knob and it would have a shorter throw.
Welp I’ll be doing this
Looks like u can't go back to stock after this correct?
How can I take off the adapter after installed?
So do you need to take the transmission out ,or is it possible to do it without?
Great video thank you. Going to make my install much easier.
Dragon ball shift knob for automatic 5th gen would be nice
Thank you SO MUCH for this video. Now I just need to find the adapter. Ordered a Hurst T handle knob from amazon. Had all kinds of fittings with it but none would fit my 2012 camaro. Now I just have to find the Barton adapter and I'm all set.
How did you find an adapter and knob that fit, I'm looking for my 2012 but I don't know how to tell if it'll fit
The plastic trim ring was by far the hardest most time consuming part of this. Had I known there are two barbs on the ring that hold it onto the knob, it would have been easier. I could see them in the hole, but brain did not engage until after flailing it off. Chewed up four or five harbor freight trim tools prying on that thing, but did not damage the boot. 6oz lighter than stock, I'm curious to see how it feels on the road.
Is the process the same for the flat stick shifter, other than the pull up collar part?
These are the sickest scorekeepers in all of Cornhole ❤
Just used this as a guide on a 2022. Everything is basically the same except the center console bolts.
I like this setup much more so than the Speed dawg. I don't like how the boot on that one comes all the way up to the ball. My only gripe with this setup is that there is no jam nut to hold the ball in place or some sort of set screw. To me that would be much better than relying on Loctite.
Any way you can send me the boot for this shifter. It wasnt in then box.
Is there any lube included or do you recommend any type of lube because it looks like metal on metal when sliding the shifter up and down? Thx
Have you guys made a video for the newer model Challengers yet? I have a 22 Scat Pack and just received the shifter by mail
hahaha i thought you edited in the 3 different adapter, they just popped up on screen. but then you picked one up lol it was like a magic trick
Perfect video. 20 minute installation.. thanks so much. Your adapter is great. One suggestion, please include a second zip tie for us old people. The first one got eaten between the seats and I had to tear my toolbox apart to find another. Great product!
How about an updated vid showing a newer Challenger?
What size mm is the 2017 one?
Daaamn Thank you for this
where can we order this adapter
This turned out to be the best Barton install ever!! Thx for showing both install methods.
Do you lose the “auto stick “ in an automatic when you install this?
U should’ve rotated the adapter first so that the shift knob wouldn’t need that glue
I see what you’re saying. Put the knob on the adapter first, and then adjust the pins where they need to be, then remove the knob, do the work, and it’ll line up 👍🏻
No big deal, the glue took 3 seconds. Easiest part!
Thanks so much for this video. I bought a 2018 GT that already had a Barton Hybrid 3 installed. I could never shift from 1st to 2nd under hard acceleration. I watched this and readjusted the base and my car shifts perfect now. I was about to take my car in for a warranty repair.
Would this fit on the c6 corvette
Thankyou for making this video!
You explain and show everything thank you bud keep it up
This is the dumbest f Ck video why don’t you have a install video like hurst does you dumbasses
Where I can buy this adapter ?
Is dark colored shift considered black? I like the textured look.
As much as would like to do this, I would totally fuck it up.
Best demo ever! Thank you!
Wtf can’t thread the linkage bolt
My kit came without the bolts required to mount the shifter arm to the assembly. What size screws are they?
How do you remove it, if need to?
What if I have no friend
Do you sell the automatic shifter adapter only for the 2019 Charger RT? Want to upgrade from factory but looking toward the speed dawg ball shifter.
What is that first set screw size at 6:50?
Does anyone have any knowledge on whether or not this will void your factory warranty?
It's possible it will. But probably only the shifter. It should not void the power train or anything else. Know that if something goes wrong, the dealership has to prove the shifter caused the problem.
@@brianreiber2362 Got yah. I appreciate that info. I felt like that would be the case, so that is good to know. It may be a risk I am willing to take.
@@streetslickz I've had the shifter on for 3 years without any issues. I did the install myself and I'm close to being handyman. You just need to remember to tell the next person that drives your car to push down on the shifter to release it from gea. Otherwise they won't know what to do and might start yanking on it.
to bad im not going to keep the old shifter plugged in thats STUPID AS FACK
I am kind of eyeing this up as to the MGW. I would love to see comparisons.