The Install video for the Barton Hybrid 3 shifter for a 2011-14 Mustang. NOTE: New design only uses two bushings.
Жүктеу.....
Пікірлер: 23
@F8LVIII5 жыл бұрын
Thanks for the install video, made this a lot easier!! Got it done with little to no headache! Can't wait to drive the car now!!
@rafp4502 Жыл бұрын
Great video thank you. Going to make my install much easier.
@soundretarded2 жыл бұрын
Best demo ever! Thank you!
@tazaxx214 жыл бұрын
You know you believe in your company when it's tattooed on your arm!
@rickdevine69066 жыл бұрын
It took me 2 hours start to finish with a lift and installing it alone. Very easy to install if you use this video as you install it. I trans mounted it and I'm glad I did. Positive short shifts now; it's like night and day! This is a very high quality shifter and it is worth every penny. Buy it!!!
@blackonefifty
6 жыл бұрын
Rick Devine ordered one of these things at the turn of the new year and have been sitting on it till now. Trying to get motivated to install it and a few other things, i just hate working on my back on the ground cry 😭 😭 😭
@Johnnyroten5 жыл бұрын
I bought a previously owned 2013 Boss 302. It already came equipped with a MGW shifter installed. I was still getting lock out in 3rd and 4th gear and grinding gears at high revs. I was seriously thinking about a trans swap. Thankfully I bought the Barton hybrid 3. This thing shifts flawlessly. I used the body mount option. David was right on when he invented this unique (pat pending) dual swivel linkage. It really is the cure. You don’t even need the trans mounted brackets that come with it. My only complaint is I wish I could have bought them separately to save maybe $100.00
@blakenorman4822
5 жыл бұрын
getting ready to install, so you think there isn't performance loss from body mounting, was thinking better performance from solid linkage trans mount
@Grabber_GT7 жыл бұрын
David, listening to this video around 27 minutes you explain about setting the gate 1-2 3 times back to back. Not sure if it is a video editing error or what. Otherwise, great video.
@chrismaraccini99327 жыл бұрын
Beautiful! I think I've finally decided on a shifter! Do you recommend using blue locktite anywhere during the install? I noticed you said something about a driveshaft safety loop. Do you have one available for the 2011-2014 Mustang GT? I'm not seeing one on your website.
@jsstrawder7 жыл бұрын
Need to go Over the 1-2 gate one more time lol
@meirb561910 ай бұрын
So do you need to take the transmission out ,or is it possible to do it without?
@williamdelapena11214 жыл бұрын
What tool is that bud? Need to adjust mine a bit
@tazaxx214 жыл бұрын
Maybe I missed it.. Wouldn't it be a good idea to use some Loctite on the bolts?
@MrRinnytintin7 жыл бұрын
hows the NVH
@erickp20277 жыл бұрын
I just bought that shifter it seems my original shifter was softer...& my reverse is really hard to get into now
@bobbyj870
7 жыл бұрын
Mad GT how do you like it aside from that stiff reverse spring?
@erickp2027
7 жыл бұрын
UJ5.0 S197 well the gears really are shorter & slowly I'm adapting to it...for instance yesterday I raced a g37x 2 door & beat him thanks to the faster shifting
@ricky55626
4 жыл бұрын
Erick P same thing here. I just got mine in today and getting into reverse is hard, takes too much effort.
@izaahrusche3 жыл бұрын
Been trying for 3 hours now and the linkage bolt REFUSES to thread.
Пікірлер: 23
Thanks for the install video, made this a lot easier!! Got it done with little to no headache! Can't wait to drive the car now!!
Great video thank you. Going to make my install much easier.
Best demo ever! Thank you!
You know you believe in your company when it's tattooed on your arm!
It took me 2 hours start to finish with a lift and installing it alone. Very easy to install if you use this video as you install it. I trans mounted it and I'm glad I did. Positive short shifts now; it's like night and day! This is a very high quality shifter and it is worth every penny. Buy it!!!
@blackonefifty
6 жыл бұрын
Rick Devine ordered one of these things at the turn of the new year and have been sitting on it till now. Trying to get motivated to install it and a few other things, i just hate working on my back on the ground cry 😭 😭 😭
I bought a previously owned 2013 Boss 302. It already came equipped with a MGW shifter installed. I was still getting lock out in 3rd and 4th gear and grinding gears at high revs. I was seriously thinking about a trans swap. Thankfully I bought the Barton hybrid 3. This thing shifts flawlessly. I used the body mount option. David was right on when he invented this unique (pat pending) dual swivel linkage. It really is the cure. You don’t even need the trans mounted brackets that come with it. My only complaint is I wish I could have bought them separately to save maybe $100.00
@blakenorman4822
5 жыл бұрын
getting ready to install, so you think there isn't performance loss from body mounting, was thinking better performance from solid linkage trans mount
David, listening to this video around 27 minutes you explain about setting the gate 1-2 3 times back to back. Not sure if it is a video editing error or what. Otherwise, great video.
Beautiful! I think I've finally decided on a shifter! Do you recommend using blue locktite anywhere during the install? I noticed you said something about a driveshaft safety loop. Do you have one available for the 2011-2014 Mustang GT? I'm not seeing one on your website.
Need to go Over the 1-2 gate one more time lol
So do you need to take the transmission out ,or is it possible to do it without?
What tool is that bud? Need to adjust mine a bit
Maybe I missed it.. Wouldn't it be a good idea to use some Loctite on the bolts?
hows the NVH
I just bought that shifter it seems my original shifter was softer...& my reverse is really hard to get into now
@bobbyj870
7 жыл бұрын
Mad GT how do you like it aside from that stiff reverse spring?
@erickp2027
7 жыл бұрын
UJ5.0 S197 well the gears really are shorter & slowly I'm adapting to it...for instance yesterday I raced a g37x 2 door & beat him thanks to the faster shifting
@ricky55626
4 жыл бұрын
Erick P same thing here. I just got mine in today and getting into reverse is hard, takes too much effort.
Been trying for 3 hours now and the linkage bolt REFUSES to thread.
@ricardomartinez244
3 жыл бұрын
Same here. Did you figure out the problem?
Wtf can’t thread the linkage bolt
1st!!!