2020 subaru limited mods and how tos . Shoot me a message if you have any questions!! Happy to help hit that sub button and let me know if you have anything you want me to do and make a video on .
Did this without knowing that the 2021 crosstrek has a long clip the hold it in place with a push screw and broke both off lol CAUTION WITH 2021 AND UP
@markfisher17162 ай бұрын
Good video. Any idea on what the Subaru part numbers are for those winglettes? Want spare ones in case I break them trying to remove them. Thx. : )
@dannyespinal49873 ай бұрын
Great explanation thank you for the info.. Keep up the good work!
@TheVTX884 ай бұрын
You forgot to put the clips on the passenger back window.
@bernieburch2264 ай бұрын
How do you get the Subaru badges
@user-nj1vs8pg8t4 ай бұрын
Can this be done in a 2006 outback?
@user-lx3lb8rl5j4 ай бұрын
Anyone got a photo for the wiring on back side of the switch
@jeffthompson84065 ай бұрын
my 2013 is outa luck?
@itsthefridge6 ай бұрын
Great video. I'm deaf though and I feel like I missed something about the harness? When you spliced it all together, it looks like you have two trailer harnesses? (Two green wires). I'm still a little confused on that part. The black wires, I get. Just the extra colored wires threw me off. Think you could clarify on that please?
@GemiJessi136 ай бұрын
Just to confirm, there are no clips for the back? Thank for this! I’ll be installing hopefully tonight on my Impreza!
@cdbeedles6 ай бұрын
Thanks for the video actually showing how the clips are working. It was the only piece I didn’t 100% picture from the Subaru pdf. Also, did you miss your clips on that passenger rear window? If so, how’s she doin’ 3yrs later?
@kayleywilliams24118 ай бұрын
Do you find it to be pretty loud when your sunroof is open? The wind makes mine almost unbearable and I can’t tell if it’s normal or not
@strokeofirish19 ай бұрын
Thanks you explained it perfectly
@cabaneencac516810 ай бұрын
There are the video I was looking for to find out if the bodywork has holes underneath...unfortunately yes because I would like to buy a cc wilderness but the oversized cladding that they put on it is a deal breaker for me. No cladding at all please but there are still these damn holes.
@luvfoto10 ай бұрын
Love this
@scottlasseigne910010 ай бұрын
Thanks for the video! Installed mine this morning and your video helped a lot!
@tameerwilliams11 ай бұрын
When you order, how long did the produvts take to get to you?
@user-ex9gs1cy6x11 ай бұрын
Too bad that roof rack is installed. It drops the vehicles’ efficiency, throwing money away.
@user-ex9gs1cy6x11 ай бұрын
Any bling you add to a vehicle is a terrible investment because it immediately loses value. Wheels, especially.
@2023startingCA Жыл бұрын
cute kid...
@JohnDoe-yh9gi Жыл бұрын
What rims do you have?
@Kirbyddog Жыл бұрын
Great video! Made it easy. Thanks for posting.
@terrymcnally5855 Жыл бұрын
Can you pop it in back easily after that? I don't want to break anything
@myoutdooradventures6378 Жыл бұрын
how has it been couple of years later?
@robsyuk Жыл бұрын
Where did you wire all the spliced wires to get power to them all? Or have you wired all to the dome?
@subarustu7716 Жыл бұрын
Right to the dome !
@ethanmay5667 Жыл бұрын
I’m getting those same wheels. Which tires are you running?
@subarustu7716 Жыл бұрын
Toyo at3s only way to go !!
@louisvilaros9066 Жыл бұрын
Thanks for sharing
@subarustu7716 Жыл бұрын
Welcome thanks for watching
@namaste2305 Жыл бұрын
Thank you for the information and the lecture!
@subarustu7716 Жыл бұрын
You're welcome thanks for watching
@jackpistone8015 Жыл бұрын
I have an outback wilderness, I installed mine but then the windows wouldn’t close. I had to take it off and it ended up breaking 😖 any ideas?
@subarustu7716 Жыл бұрын
Only thing I could think of is if that clip was in the way
@fgrau7376 Жыл бұрын
Millennial Car Mod 😂😂😂😂😂
@philrazzi7782 Жыл бұрын
Thanks for the vid. Moved around a little fast at the end, but I got the gist of it.
@araaramlbb746 Жыл бұрын
what about passengers seat how do u connect?
@kimberlyingleright4440 Жыл бұрын
What color were the mats you purchased from weathertech for your Crosstrek?
@vasipesah5678 Жыл бұрын
Hello, it turned out very well! I want to ask which cable are you connecting the projector to? I'm with Subaru Tribeca. Thank you!
@ZekeMaster85 Жыл бұрын
I like this install video. I would love to see a b role with some music or a walk around at the end to show off the finish products.
@watchingdanny Жыл бұрын
I got these and put the factory mats over the WeatherTechs. They fit nice and keep my WeatherTechs protected. Floor mats for my floor mats. 😁
@outdoorzenb7799 Жыл бұрын
Great video, thanks!
@subarustu7716 Жыл бұрын
Very welcome happy holidays!!
@kevin-kq2uv Жыл бұрын
Thank you so much for this info! I had a bit of a screw up and forgot to take a video of which side positive and negative connect to switch. Any Chance you could share the video you took prior to removing the wires? Much appreciated! I will be following for more upgrades on my Subaru :)
@subarustu7716 Жыл бұрын
I unfortunately don't have any footage besides whats posted
@kevin-kq2uv Жыл бұрын
@@subarustu7716Thats fine I knew it was a long shot! Thanks for getting back to me. Cheers!
@AAULTEN Жыл бұрын
If anyone is trying this on a newer Outback, I just did a 2023 and it's basically the same - the clips now come attached to the new F001SAN000 parts (outback). I had issues with the windows 'Anti-pinch' safety not wanting to shut one window after install, and had to try to squeeze the inside of the clips tighter into the channel, just running my index/thumb thru the channel and pressing like hell - that worked, and it didn't happen again. The install manual is here btw: subaruonlineparts.com/docs/F001SAN000.pdf
@trentmaxcell4691 Жыл бұрын
I installed window visors in my 2020 Subaru Crosstrek without putting on the clips but relying only on the the stickers. After one month, one of the back door window visor went-off while we are traveling and lost it. Subaru never gave installation manual with the visors. Now, I have to purchase again and because of your video, I can install it correctly. Thank you
@subarustu7716 Жыл бұрын
Glad I could help , bummer you lost one . Also make sure to clean well and apply light amount of heat . Don't burn it
@montasirali2165 Жыл бұрын
please mine one is getting off after every 15 sec and then i have to touch to glow it again like your 1st one
@montasirali2165 Жыл бұрын
Broh how to enable constant colour mode
@nikeroach Жыл бұрын
sweet bro thanks
@elainepalmer Жыл бұрын
Thank you so much! To the point! Now I know I can do this by myself! :)
@ralphlong9973 Жыл бұрын
Nice fun little rainy day project. It’s on my list now. Thanks.
@subarustu7716 Жыл бұрын
Thanks for watching!!
@youraudiomom Жыл бұрын
What double sided tape did you use and where did you get that squeegee?
@subarustu7716 Жыл бұрын
3m trim tape . Just a wrap squeegee, Amazon
@MrDonuts10 Жыл бұрын
This video helped me a lot! May I ask where you got the seat cover from ?
@subarustu7716 Жыл бұрын
No seat covers in this guy
@MrDonuts10 Жыл бұрын
@@subarustu7716 : I thought the backseat you had put some for the kids.
@subarustu7716 Жыл бұрын
@@MrDonuts10 oh yeah lol sorry
@subarustu7716 Жыл бұрын
I'll have to look that one up
@globalartjewelry2768 Жыл бұрын
Hey my man, did you have a flicker problem with the reflector/lights? Dude from advanced told me i need resistors
@subarustu7716 Жыл бұрын
No not if you wire through trailer lights
@baconreaper666 Жыл бұрын
Hey Stu, looking at doing 215/70/16 with Sparco 16's. Any issues with running a slight smaller rim?
@subarustu7716 Жыл бұрын
Definitely not a problem alot of people run 15s but just getting more tire which you get a little more tire sway with
Пікірлер
Love it
Did this without knowing that the 2021 crosstrek has a long clip the hold it in place with a push screw and broke both off lol CAUTION WITH 2021 AND UP
Good video. Any idea on what the Subaru part numbers are for those winglettes? Want spare ones in case I break them trying to remove them. Thx. : )
Great explanation thank you for the info.. Keep up the good work!
You forgot to put the clips on the passenger back window.
How do you get the Subaru badges
Can this be done in a 2006 outback?
Anyone got a photo for the wiring on back side of the switch
my 2013 is outa luck?
Great video. I'm deaf though and I feel like I missed something about the harness? When you spliced it all together, it looks like you have two trailer harnesses? (Two green wires). I'm still a little confused on that part. The black wires, I get. Just the extra colored wires threw me off. Think you could clarify on that please?
Just to confirm, there are no clips for the back? Thank for this! I’ll be installing hopefully tonight on my Impreza!
Thanks for the video actually showing how the clips are working. It was the only piece I didn’t 100% picture from the Subaru pdf. Also, did you miss your clips on that passenger rear window? If so, how’s she doin’ 3yrs later?
Do you find it to be pretty loud when your sunroof is open? The wind makes mine almost unbearable and I can’t tell if it’s normal or not
Thanks you explained it perfectly
There are the video I was looking for to find out if the bodywork has holes underneath...unfortunately yes because I would like to buy a cc wilderness but the oversized cladding that they put on it is a deal breaker for me. No cladding at all please but there are still these damn holes.
Love this
Thanks for the video! Installed mine this morning and your video helped a lot!
When you order, how long did the produvts take to get to you?
Too bad that roof rack is installed. It drops the vehicles’ efficiency, throwing money away.
Any bling you add to a vehicle is a terrible investment because it immediately loses value. Wheels, especially.
cute kid...
What rims do you have?
Great video! Made it easy. Thanks for posting.
Can you pop it in back easily after that? I don't want to break anything
how has it been couple of years later?
Where did you wire all the spliced wires to get power to them all? Or have you wired all to the dome?
Right to the dome !
I’m getting those same wheels. Which tires are you running?
Toyo at3s only way to go !!
Thanks for sharing
Welcome thanks for watching
Thank you for the information and the lecture!
You're welcome thanks for watching
I have an outback wilderness, I installed mine but then the windows wouldn’t close. I had to take it off and it ended up breaking 😖 any ideas?
Only thing I could think of is if that clip was in the way
Millennial Car Mod 😂😂😂😂😂
Thanks for the vid. Moved around a little fast at the end, but I got the gist of it.
what about passengers seat how do u connect?
What color were the mats you purchased from weathertech for your Crosstrek?
Hello, it turned out very well! I want to ask which cable are you connecting the projector to? I'm with Subaru Tribeca. Thank you!
I like this install video. I would love to see a b role with some music or a walk around at the end to show off the finish products.
I got these and put the factory mats over the WeatherTechs. They fit nice and keep my WeatherTechs protected. Floor mats for my floor mats. 😁
Great video, thanks!
Very welcome happy holidays!!
Thank you so much for this info! I had a bit of a screw up and forgot to take a video of which side positive and negative connect to switch. Any Chance you could share the video you took prior to removing the wires? Much appreciated! I will be following for more upgrades on my Subaru :)
I unfortunately don't have any footage besides whats posted
@@subarustu7716Thats fine I knew it was a long shot! Thanks for getting back to me. Cheers!
If anyone is trying this on a newer Outback, I just did a 2023 and it's basically the same - the clips now come attached to the new F001SAN000 parts (outback). I had issues with the windows 'Anti-pinch' safety not wanting to shut one window after install, and had to try to squeeze the inside of the clips tighter into the channel, just running my index/thumb thru the channel and pressing like hell - that worked, and it didn't happen again. The install manual is here btw: subaruonlineparts.com/docs/F001SAN000.pdf
I installed window visors in my 2020 Subaru Crosstrek without putting on the clips but relying only on the the stickers. After one month, one of the back door window visor went-off while we are traveling and lost it. Subaru never gave installation manual with the visors. Now, I have to purchase again and because of your video, I can install it correctly. Thank you
Glad I could help , bummer you lost one . Also make sure to clean well and apply light amount of heat . Don't burn it
please mine one is getting off after every 15 sec and then i have to touch to glow it again like your 1st one
Broh how to enable constant colour mode
sweet bro thanks
Thank you so much! To the point! Now I know I can do this by myself! :)
Nice fun little rainy day project. It’s on my list now. Thanks.
Thanks for watching!!
What double sided tape did you use and where did you get that squeegee?
3m trim tape . Just a wrap squeegee, Amazon
This video helped me a lot! May I ask where you got the seat cover from ?
No seat covers in this guy
@@subarustu7716 : I thought the backseat you had put some for the kids.
@@MrDonuts10 oh yeah lol sorry
I'll have to look that one up
Hey my man, did you have a flicker problem with the reflector/lights? Dude from advanced told me i need resistors
No not if you wire through trailer lights
Hey Stu, looking at doing 215/70/16 with Sparco 16's. Any issues with running a slight smaller rim?
Definitely not a problem alot of people run 15s but just getting more tire which you get a little more tire sway with