On my channel, you will see videos about fixing, building, welding and fabrication. It will include my tractor, implements and other tools working on my property. My intent is to inspire others to create and build projects of their own. Thanks for watching Projects with Paul.
“I get a commission every time you purchase a product through my Amazon affiliate links.”
Пікірлер
Well that’s amazing. Thank you so much!
Very nice!
Thanks a bunch!
Flip flops are a nice touch
that mix looked a little dry
It's probably illegal in Australia.....
Did you install it with self tapping screws?
No. I drilled holes and used nuts and bolts. Thanks for watching.
Use the bottom hole on your tractor it's cheaper
Fortunate to get that big nut off. The PBLIW01 is not made for nut removal larger than 1/2, A DeWalt or Milwaukee would have done the job. Also, its been stated already, that Mode 3 is more powerful, and 1 is the least powerful. Tough when the industry seems to back away from good ole pneumatic/air units, even electric ones are better than Battey power. Overuse and getting the motor hot will kill the Ryobi. Was on Sale a couple years ago $159, then went to $169, end of 2023 was $199, now in June 2024 it is $219 at Home Depot (stand alone - no battery). HD been Price Gouging so beware when a Sale is not really a sale.
Somebody commented your trailer looked overloaded it may not be overloaded but it is a little short you need a longer trailer to get that tongue weight get those rear tires on towards the front of the trailer a little farther that just looks dangerous I say this because I lost control of my truck while holding a bobcat that wasn't loaded right
I can't believe he loaded that tractor without putting block under the back of the trailer I saw his truck raised up tires almost went off the ground look like you can't use just one chain across the back like that you will definitely get a ticket if you ever get pulled over I know that's a good idea and I've done it but it is against the law
Great Review
Thanks for watching
MD-90❌ Boeing-X66A (NASA)☑️
Where did you get the dring for the front mount things?
Harbor Freight. I put an Amazon link in the video description for the same ones. Thanks for watching.
@@ProjectsWithPaulthanks! I could’ve sworn I looked for a link haha
@@TexasRedneck I just added it. I put a link for 3/8" and 1/2" because I can remember witch size I used. Ill measure tomorrow.
@@ProjectsWithPaul aww ok, thank you!
Poor oLd planes...😭
had a question, does the water get too warm in the summer ?
No I would like it to get warmer. Thanks for watching
I may have to build your design. That will look good out back. Thanks! You and the Mrs. need to come see my garden and hang out at the beach!
It does look good buddy! I think it will do well! Thank you for sharing my friend!
Thanks Mark, I appreciate it.
Paul, where did you get the rubber gasket for the inlet? Did that come with it?
Yes it came with it. I'm sure they are on Amazon if you dont have one. Thanks for watching.
Love the idea, but the pump sounds really loud in the video. Is that always the case?
It was until I swapped it for the 2500 gpm pump filter. Now it's much quieter. Thanks for watching.
how durable is the tank? can it be partially buried? or best left above ground?
It's pretty durable, but I don't know about burying it. Thanks for watching.
On the pump size, should I get the 2500gph or just stick with 1500gph? I got my plunger valve kit and my stock tank already 😁😁
I like the 2500. It's quieter and has a bigger filter. Thanks for watching
Hhmm crunch
how do you come up with 625 gallons it looks like 60 gallons
Look it up on tractor supply.com that's what it is. Its 8 feet in diameter and 2 feet deep. Thanks for watching
So in reality have you had it on the top speed you could have been through two days ago😅
where did you get that plastic tank?
Tractor supply store
PSA. As a kind viewer pointed out, mode one is not the most powerful setting, mode 3 is. Thanks for watching.
dual arc is fraudulent. its all lies. do not buy this.
Can you go into detail?
i just ordered a 18 guage, and think eventually i'll need one of these, but I'm wondering have you tried it with a regular non HP battery? I don't want to have to purchase extra battery just for a project.
No but I will and let you know. Thanks for watching
Nice work man - can you share how the fromt box helped you - obviously cutting down space yet looks awesome - can you stand and cast from it? Lastly excuse my ignorance how do you. It the diamond plate and how do attach it - I ask as I just drove by an old beat up scout and bought it no trailor and video made me feel lucky!!! Thank you… Rj
So yes the front deck you can stand on and cast from, it also helps when your launching and docking the boat. everything is bolted together in some form with lots of clear silicone in between. Let me know if you have anymore questions I would be glad to help. Good luck with that project. Thanks for watching.
@@ProjectsWithPaul i really appreciate that - i’m fairly handy and detail oriented yet realize asking is always smarter than the famous old stories of father driving two hours to find a location as asking for advice made themself feel weak. Hopefully that analogy was fair enough. Watch them start refusing to ask google maps for directions - At that point - I’ll live in that boat :)
Turned a coke can upside down the other day and there was a Delta Airlines logo on it.....
Thats cool. Thanks for watching
How’s it holding up after a few years?
It still looks great. I'm getting ready to set it up for thus year
had to do this just today! Thanks for sharing this video. I would not have got those arm rests off with out this video.
Thats awesome! Thanks for watching
Did you need to install a brake light relay? My RV has combined tail/brake lights. I was reading that when using the supplemental braking device, the brake lights on the bronco override the turn signals. This means that when you hit the brakes and using your blinkers at the same time, the blinkers won’t work.
We did not put a separate relay in. He wasn't worried about the blinkers as long as the brake lights were working. Thanks for watching.
Great job, Granddad. Nice hack.
Nice job Paul. This room is coming together quite nicely. You should be able to reprogram the stop point on the shade that is going a little too far. Lutron and most motorized shades I've used had a way to adjust that. May be worth contacting the manufacturer if it's not in the manual. Keep up the great work.
Thanks Ted. I read through the manual and learned how to program them to stop where i wanted them. Thanks for watching buddy.
What site did you find thos liner on?
There is no liner.
Does it come with the ability to attach a natural gas adapter for continuous gas?
I don't know. It didn't come with any extra parts. There website might have more info. Thanks for watching
Projects with Paul thanks for sharing with me another wonderful video good job putting those windows shades up i told you should do something with those windows i am glad you finally did to keep things private and thanks again and God Bless.
You were right Wayne. I finally got them covered. Thanks for watching and sharing buddy.
Thats very cool! Thank you for sharing my friend!
Thanks for watching Mark.
Good Job, Babe! I love you!❤
I can’t tell you how much this vid helped. I have a bad boy mower very similar to the one you have. But the plywood on the seat bottom rotted out. I couldn’t find any repair videos on that but watching yours and using the same principles I was able to repair the seat and save hundreds of dollars! Thanks!
Thats awesome. I'm glad it helped. Thanks for watching
My bad boy mowers seat is rotted on the bottom too. Took it apart today but I can’t seem to figure out how to get the slide for the adjustable seat off on the right side. The inner slide won’t move far enough to access the front bolt where it attaches to the wood. Any recommendations?
Not really other than just keep digging into it. Thanks for watching.
Thanks for posting. Did you cut down the 2x4s foe the legs?
Thanks for watching yes I cut them down
Looks really good! You've really been in that shower with all the knobs full blast and that's why you've been missing. I would be too. Can't wait to see the finished project.
That shower is awesome!! Thank you for sharing my friend!
Projects with paul thanks for sharing this video with me i really like how it turbned out paul it looks really awesome keep up the good work you are doing and iwill keep watching and i gave you a thumbs up and shared you out on my community tab my friend and God Bless.
Can you store propane tanks in it?
No its not big enough. Thanks for watching
What paint did you use for bottom?
Rustoleum black in 1 gallon can
Thanks for watching
👍
Maddog come back ❤️🥺✈️
❤