Cool car like the way it sounds but me I'm not a fan of that big dog house looking scoop
@HammerdownMotorsportsUSA4 күн бұрын
Oh man that is sweet love that movie
@jimlevering46134 күн бұрын
Love the movie and the car. Good luck with it. Watch out for a white GTO😊
@24run4 күн бұрын
Cool Truck and the cool the car sounds awesome
@cowboychevyschneider4 күн бұрын
Congratulations on your dream car and keep the great work hope you have a great week
@NaturalBornRebel7 күн бұрын
JUST A FYI: take rings off when working around batteries. I had a gold band melt to the bone before, no fun.
@EverydayTools8 күн бұрын
What were the dimensions on that piece of 14ga sheet metal, I'm looking to get it for my truck. Thanks
@larrybrown28928 күн бұрын
Those 235s sounded the same...our 1948 1 ton had 'hiway gears'..so it went plenty fast in traffic
@KG4JYS9 күн бұрын
You skipped right over the part I'm struggling with. That hard fuel line that you describe as a "flexible line" is connected to the engine via 8 hoses with some type of electrical device in the middle. How do I remove those 8 connections without breaking them? Everyone just skips over that part in each youtube video I've seen.
@bigredjohnson69219 күн бұрын
Great video, but LMAO when you said "torsion bar just slips right out.".
@AlexHernandez-gh3gr9 күн бұрын
why wouldthe servo to the band affect 1-2 shift?
@barnhousegarage11 күн бұрын
It doesn't really make sense to restore these cars unless you plan on keeping it .A person would never make a dime doing a full restoration on something like this,l have a 78 I'm restoring and it was a texas car l have 15k in it and it's just now ready for paint l figured l have another 15-20k to go before it's done
@DJT65211 күн бұрын
Would this be the same for a 6” lift kit?
@stevechimelski455713 күн бұрын
It is just AMAZING to me that no one at GM noticed the shifter. Major FAIL! Also, at this price to not give options is just ignorant. No matter what color exterior YOU MUST HAVE ALPINE UMBER! What? Maybe I want black, or grey, or beige... Also limited on wheel and tire choices. When one builds a Denali Ultimate, one should get more top options. NOT LESS!
@LBZDIRTYYMAX15 күн бұрын
What size tires on the blue lly?
@dlucas52716 күн бұрын
Like the idea. Not sure which one you chose. However, I would go with sealing it if you are keeping the old truck. Also, you can torch it to give the boards a nice charcoal aging.
@dlucas52717 күн бұрын
I just found your channel. That's a nice looking truck. Congrats!
@user-ek3sq7rz8o17 күн бұрын
I've been using renewable diesel in my Duramax. Also use Lucas oil DPF diesel deep clean. You'll be amazed how much more power you can get. Renewable diesel burns 75% cleaner than regular #2. Thats 75% less regen and DEF.
@madmatt947118 күн бұрын
Thank you for showing the steering wheel hardware installation!
@AJPerry-ye3zq18 күн бұрын
Great video
@ndbaker7418 күн бұрын
I just bought a 2007 NPR in an auction. When you said that you didn't really have a purpose for your truck and that it's just a cool truck, I really felt that! 😂
@blkcyborg9219 күн бұрын
Are your heads still good?? Looking at trading up for Z06 this month or next (will be daily and weekend track car)
@BuddieBoy-yg6wr21 күн бұрын
What do you think our country will look like if the Marxist Democrats steal another election?
@FrankyOrtiz-cj7ww21 күн бұрын
So you don’t need to put synthetic oil
@MrTeckman0122 күн бұрын
Check out the fuel filter upgrade as well from vse engineering.
@atx-cvpi_9923 күн бұрын
It’s way easier than the Astro vans.
@KarKamp25 күн бұрын
Just found this, not a bad setup but sounds like you bought it over building it from the way your talkin sounds like you read it from somewhere over you just automatically knowing from building it..
@slow_restoration23 күн бұрын
I've owned this truck since new, definitely didn't buy it like this!
@adrianlott62227 күн бұрын
Will this stop a slipping transmission ?
@peterdrury562728 күн бұрын
When I heard the noises coming from it while running on the hoist, I would have said 'bad pinion bearing'. That, of course makes the visible wear on the crown gear collateral damage. By the way, I may be able to explain the negative pressure in the diff as you removed the drain plug. If the C6 is the same as the C5, it will have a vent with a check valve in it. Allows pressure built up due to heat expanding the air in the unit to be vented, but maintains some vacuum during cool down. This was reputed to be GM's effort to reduce driveway leakage issues. I have had a new C5 Vent in my hands and can verify the check valve action as described.
@TexasknowhowАй бұрын
Just happened upon your channel as I'm planning to run an engine build with the Term X and wanted to see others running the engine with the TermX on the stand. Good video; engine sounds great. After watching your video I'll try to get the AFR on the dash screen prior to first start so I can easily watch that. Thanks for posting!
@Omek1972Ай бұрын
Man, I wish I had the money and or Knowledge to do this. I have a 07 mega cab that I would love to keep but it is a money pit. The rockers, cab corners and upper wheel wells are toast. Awesome work! If I decide to tackle this job, I will reference your video and pick your brain for months, I am sure.
@freakyflow28 күн бұрын
Its actual cheap and easy if you do your homework on tools And how dos ..Your basic needs will be sawzall And grinder with a cut off wheel And a drill The welder which would best suit You And the cost And the need would be a mini mig welder - $200 avg Then get some 18 gauge metal to test it out on ..plenty of videos on how to weld thin metals ..Order your parts for that truck..Find the welds on the old parts Drill them out And chisel the rest Clean up the areas with the grinder And sandpaper Get some weld thru primer .. Before you weld make sure the battery is dis conn..And you have a bucket of water around ..Its good if you have a place to work on it And up to having min a compressor for airtools
@BSTatonkaАй бұрын
At 78 mph My LML made 15-16 mpg with 35 inch tires. After I deleted it I made 18-20 mpg. Deleted I would get 26 mpg at 55 mph.
@markthomas4083Ай бұрын
Too bad you didn’t drive the truck after this job, the body language and voice tone would have described the after job performance.
@tonyscott1340Ай бұрын
@GenralMotors
@tonyscott1340Ай бұрын
@generalmotors
@tonyscott1340Ай бұрын
@gmc
@boseal7633Ай бұрын
What’s best set up on my 03 Lb7 for towing to get best power an fuel economy towing ? It’s bone stock but it needs injectors I I do have edge with attitude. What is difference in rear turbo
@slow_restorationАй бұрын
This is a gas truck, 6.0 LQ4
@sixeight6Ай бұрын
Im having the same problem the engine running rich how did you tune it?
@lynettegerweck5191Ай бұрын
Did you fasten\glue down the planks anywhere? How did the floor hold up bringing in the slide?
@JohnDoe-fg2oqАй бұрын
Glad it didnt sell.
@JohnDoe-fg2oqАй бұрын
Awesome.
@technicaltrucking8704Ай бұрын
they seem to only have the cat back exhaust setups. is that what this is?
@TrailTime.Ай бұрын
Nice to see it back!!
@ShezgotYarnАй бұрын
My daughter spilled milk in the back seat on my GMC Denali glad to see I can replace but I will need the foam replaced also .
Пікірлер
Congratulations
Awesome ride I love it!!
light on the subject....
Saw the Chevy Luv what's the progress on it
Cool car like the way it sounds but me I'm not a fan of that big dog house looking scoop
Oh man that is sweet love that movie
Love the movie and the car. Good luck with it. Watch out for a white GTO😊
Cool Truck and the cool the car sounds awesome
Congratulations on your dream car and keep the great work hope you have a great week
JUST A FYI: take rings off when working around batteries. I had a gold band melt to the bone before, no fun.
What were the dimensions on that piece of 14ga sheet metal, I'm looking to get it for my truck. Thanks
Those 235s sounded the same...our 1948 1 ton had 'hiway gears'..so it went plenty fast in traffic
You skipped right over the part I'm struggling with. That hard fuel line that you describe as a "flexible line" is connected to the engine via 8 hoses with some type of electrical device in the middle. How do I remove those 8 connections without breaking them? Everyone just skips over that part in each youtube video I've seen.
Great video, but LMAO when you said "torsion bar just slips right out.".
why wouldthe servo to the band affect 1-2 shift?
It doesn't really make sense to restore these cars unless you plan on keeping it .A person would never make a dime doing a full restoration on something like this,l have a 78 I'm restoring and it was a texas car l have 15k in it and it's just now ready for paint l figured l have another 15-20k to go before it's done
Would this be the same for a 6” lift kit?
It is just AMAZING to me that no one at GM noticed the shifter. Major FAIL! Also, at this price to not give options is just ignorant. No matter what color exterior YOU MUST HAVE ALPINE UMBER! What? Maybe I want black, or grey, or beige... Also limited on wheel and tire choices. When one builds a Denali Ultimate, one should get more top options. NOT LESS!
What size tires on the blue lly?
Like the idea. Not sure which one you chose. However, I would go with sealing it if you are keeping the old truck. Also, you can torch it to give the boards a nice charcoal aging.
I just found your channel. That's a nice looking truck. Congrats!
I've been using renewable diesel in my Duramax. Also use Lucas oil DPF diesel deep clean. You'll be amazed how much more power you can get. Renewable diesel burns 75% cleaner than regular #2. Thats 75% less regen and DEF.
Thank you for showing the steering wheel hardware installation!
Great video
I just bought a 2007 NPR in an auction. When you said that you didn't really have a purpose for your truck and that it's just a cool truck, I really felt that! 😂
Are your heads still good?? Looking at trading up for Z06 this month or next (will be daily and weekend track car)
What do you think our country will look like if the Marxist Democrats steal another election?
So you don’t need to put synthetic oil
Check out the fuel filter upgrade as well from vse engineering.
It’s way easier than the Astro vans.
Just found this, not a bad setup but sounds like you bought it over building it from the way your talkin sounds like you read it from somewhere over you just automatically knowing from building it..
I've owned this truck since new, definitely didn't buy it like this!
Will this stop a slipping transmission ?
When I heard the noises coming from it while running on the hoist, I would have said 'bad pinion bearing'. That, of course makes the visible wear on the crown gear collateral damage. By the way, I may be able to explain the negative pressure in the diff as you removed the drain plug. If the C6 is the same as the C5, it will have a vent with a check valve in it. Allows pressure built up due to heat expanding the air in the unit to be vented, but maintains some vacuum during cool down. This was reputed to be GM's effort to reduce driveway leakage issues. I have had a new C5 Vent in my hands and can verify the check valve action as described.
Just happened upon your channel as I'm planning to run an engine build with the Term X and wanted to see others running the engine with the TermX on the stand. Good video; engine sounds great. After watching your video I'll try to get the AFR on the dash screen prior to first start so I can easily watch that. Thanks for posting!
Man, I wish I had the money and or Knowledge to do this. I have a 07 mega cab that I would love to keep but it is a money pit. The rockers, cab corners and upper wheel wells are toast. Awesome work! If I decide to tackle this job, I will reference your video and pick your brain for months, I am sure.
Its actual cheap and easy if you do your homework on tools And how dos ..Your basic needs will be sawzall And grinder with a cut off wheel And a drill The welder which would best suit You And the cost And the need would be a mini mig welder - $200 avg Then get some 18 gauge metal to test it out on ..plenty of videos on how to weld thin metals ..Order your parts for that truck..Find the welds on the old parts Drill them out And chisel the rest Clean up the areas with the grinder And sandpaper Get some weld thru primer .. Before you weld make sure the battery is dis conn..And you have a bucket of water around ..Its good if you have a place to work on it And up to having min a compressor for airtools
At 78 mph My LML made 15-16 mpg with 35 inch tires. After I deleted it I made 18-20 mpg. Deleted I would get 26 mpg at 55 mph.
Too bad you didn’t drive the truck after this job, the body language and voice tone would have described the after job performance.
@GenralMotors
@generalmotors
@gmc
What’s best set up on my 03 Lb7 for towing to get best power an fuel economy towing ? It’s bone stock but it needs injectors I I do have edge with attitude. What is difference in rear turbo
This is a gas truck, 6.0 LQ4
Im having the same problem the engine running rich how did you tune it?
Did you fasten\glue down the planks anywhere? How did the floor hold up bringing in the slide?
Glad it didnt sell.
Awesome.
they seem to only have the cat back exhaust setups. is that what this is?
Nice to see it back!!
My daughter spilled milk in the back seat on my GMC Denali glad to see I can replace but I will need the foam replaced also .
That is not bad it’s like there high end trucks.
I like it