Пікірлер

• 
  @jordanalexander61514 күн бұрын

  I have a 2008 and i want to do this to mine. Any idea what it would cost. Ive saw pro charger kits for 8k. But ill probably have to beef up the motor to handle it.

• 
  @Albertsuptosomething10 күн бұрын

  @@jordanalexander615 currently that the truck has 30 K plus in mods, my suggestion is redo your heads with a can package that includes valves and springs, and if you can do some long tube headers one 7/8 headers. The problem with the transmissions of these trucks is that the gears are way too long. I only kept the rear diff and removed the front diff since I only changed the rear diff from a 392 to a 456 that shortened gear and I threw a converter, currently the transmission with the power I added tends to slip but then again I’ve been using it as a daily since Covid with the set up and beating on it 200k+. The truck changed completely with Cam‘s long tubes and differential dramatically before adding the supercharger. The supercharger amplified it way more and I’m only running 5 pounds and I’m killing Trackhawks scat packs 5.0s and many more. The Procharger hello you too go up to 32 pounds of boost each pound is roughly 20 wheel horsepower..

• 
  @Albertsuptosomething10 күн бұрын

  @@jordanalexander615 the builder would cost more but I do all the labor work myself

• 
  @jordanalexander61510 күн бұрын

  @@Albertsuptosomething my truck I've noticed does have long gears but it's the five speed auto instead of the four. I've already had transmission work done to beef it up to handle bit more. I notice if I hold it to around 5k before 2nd the truck just goes hard through 2nd. But that gear goes forever literally from 30 to 65 in just 2nd. I put dual straight pipes on it and it picked up a little bit. Just wonder if I'd be better off finding one built. My truck is worn out.

• 
  @Albertsuptosomething10 күн бұрын

  @@jordanalexander615 my transmission is worn already. I’m not putting a built one I’m going I’m stock, I’m getting one from Jasper transmissions the stock one holds up a lot and would’ve hold up a lot more if it wasn’t for the 200 K plus mileage. the only thing I’m keeping with the transmission is my upgraded converter which wakes it up a heck

• 
  @jordanalexander6159 күн бұрын

  @@Albertsuptosomething I actually didn't need to rebuild my transmission. The computer went out from short in my wiring harness. But it threw all the codes for the transmission so I assumed it was the electrical components going out. Spent 4500 to rebuild it stronger than before and then still had to replace the computer for 500

• 
  @gunnersheldon415827 күн бұрын

  I just got an 03 what cam and exhaust are you running?

• 
  @Albertsuptosomething26 күн бұрын

  Im going to make another video on my exhaust set up soon , I custom fabricated the whole system . I have jba 1 7/8 longtubes to an x pipe into qtp cutouts that is straight pipe on the sides and when closed it goes to a magnaflow to a carven r exhaust. It’s pretty crazy 😅 the cam im running is a comp little boy cam

• 
  @FINDROBLOXАй бұрын

  bro wtf i know you have to rebuild the hemi with better parts so it dont explode but damn did not know it could do all this

• 
  @AlbertsuptosomethingАй бұрын

  5.7s have a lot of potential when done right , plus you need to know where the limits are , and not focus just on on hp , gearing , converters, and other factors play a big role to good get results.

• 
  @AlbertsuptosomethingАй бұрын

  Lol and im almost at 200k and still going strong same trans and motor

• 
  @FINDROBLOX29 күн бұрын

  @@Albertsuptosomething damn mine got 162k engine is semi stock has some small aftermarket things but runs good as hell not as fast lol but runs great

• 
  @FINDROBLOX29 күн бұрын

  @Albertsuptosomething yeah I've been wanting to do something like this with mine but gas is crazy but idk imma start out simple with like new exhaust system and idk some small performance mods and work my way up lol

• 
  @Albertsuptosomething26 күн бұрын

  @@FINDROBLOX i bet it runs good find someone that can do the diff and put a 4.56 to wake it up

• 
  @kayden_chatigny4214Ай бұрын

  like the tag watch my man. and beautiful ram. I dream of building my 5.7 3rd gen.

• 
  @AlbertsuptosomethingАй бұрын

  Thanks man! Let me know if you have any questions, would love to see the progress of the truck.

• 
  @itssavagealan8925Ай бұрын

  What pro charger and cam you got on that thing. I got a 5.7 and it’s time to upgrade sowlthings

• 
  @AlbertsuptosomethingАй бұрын

  D1SC and 6.1 little boy cam its what is called

• 
  @davidguerrero7395Ай бұрын

  How do I do this to my 07 5.7 hemi 😭

• 
  @AlbertsuptosomethingАй бұрын

  Lol 4.56 gears long tubes heads cam and procharger , a lot of sweat and patience not an easy build…

• 
  @custom90532 ай бұрын

  How can I do this to mine?

• 
  @AlbertsuptosomethingАй бұрын

  Sorry for late response you can get it at www.usspeedo.com/product-category/aftermarket-products/dodge/

• 
  @txssericc2 ай бұрын

  😍😍😍

• 
  @primitivehealing9683 ай бұрын

  Your gauge is definitely lying. Based on the trees moving by.. U was SCOOTIN!!

• 
  @austin_94gt183 ай бұрын

  What cam?

• 
  @AlbertsuptosomethingАй бұрын

  Its a comp 6.1 little boy cam

• 
  @siah2753 ай бұрын

  how much this setup cost? i wanna do this ta my 05 ram

• 
  @AlbertsuptosomethingАй бұрын

  Im currently hitting 30k right now and thats me doing all the work my self over the past 5 years

• 
  @skillful_sloth42563 ай бұрын

  Yo bro is this with the pre eagle heads? Or the more newer eagle heads

• 
  @Albertsuptosomething3 ай бұрын

  Pre eagle my friend

• 
  @davidmartinezlopez74257 ай бұрын

  Can you cammed a 5.7 2006??? Like just put it on and that’s it or you have to change something else after you put it on?

• 
  @Albertsuptosomething7 ай бұрын

  I recommend redoing your heads , put stiffer valve springs and new lifters with the mds delete while you there, with higher volume oil pump not a high pressure oil pump

• 
  @punchline3nt8 ай бұрын

  Throttle response is 🔥

• 
  @skillful_sloth42568 ай бұрын

  Gen 3 heads or did you swap with the eagle heads?

• 
  @AlbertsuptosomethingАй бұрын

  Sorry for late response its a re machined pre eagle head with 6.1 valves and springs

• 
  @skillful_sloth4256Ай бұрын

  @@Albertsuptosomething awesome man thanks, it’s cause I know a lot of people go with the newer eagle heads, but I know the pre eagle heads can still be great

• 
  @AlbertsuptosomethingАй бұрын

  @@skillful_sloth4256 yes they can! and when you put a good cam with it and long tubes man it pulls hard even before i added boost.

• 
  @NathanielMolina-fj9wi9 ай бұрын

  What exhaust system u running

• 
  @Albertsuptosomething9 ай бұрын

  Jba catless longtube headers 1 7/8 into electronic cutout into dual side pipes no mufflers when valves are open, and when valves are closed goes straight to the back into Magnaflow muffler and resonator into dual tips out the back

• 
  @rubenvillalobos80611 ай бұрын

  Whats the full build🔥want to build my 05 single cab

• 
  @deadman734611 ай бұрын

  how much does it cost to do everything you have done to it?

• 
  @lenzking636011 ай бұрын

  35k mined you I’ve done all the work my self so no labor cost, just parts motor wise 15-20k

• 
  @user-or2ql4bl4x11 ай бұрын

  Would love to know what performance bolt on you have

• 
  @jonesyshelton78711 ай бұрын

  I’m trying to build my 2007 dodge hemi, point me into the direction of where and what to buy!

• 
  @dlryanderson Жыл бұрын

  I like it I got a 06 4x4 5.7 I need to do this

• 
  @Ivan_A_Gomez Жыл бұрын

  @Albertsuptosomething do you have links to all the parts for the pro chargers and parts you had to buy to make it work? I would really appreciate it brother

• 
  @G0ld0z Жыл бұрын

  What diff setup

• 
  @Albertsuptosomething Жыл бұрын

  Originally came with 3.92 and put 4.56

• 
  @Albertsuptosomething Жыл бұрын

  Woke it up for sure

• 
  @dustingiberson5749 Жыл бұрын

  Viper engine

• 
  @Albertsuptosomething Жыл бұрын

  No viper engine in there , it’s a 5.7 hemi with procharger and cams.

• 
  @dustingiberson5749 Жыл бұрын

  @@Albertsuptosomething sorry the srt hood and srt front end and the srt wheels and the srt fin screamed srt10!!

• 
  @dustingiberson5749 Жыл бұрын

  That's a srt10

• 
  @Albertsuptosomething Жыл бұрын

  It’s the farthest thing from a srt10, and much much faster. Listen to the exhaust.

• 
  @dustingiberson5749 Жыл бұрын

  @Albertsuptosomething it's not that far everything on it is from a srt10 hood, bumper, wheels , fin sorry my mistake

• 
  @swaggeras Жыл бұрын

  Let’s see the engine pls

• 
  @lenzking6360 Жыл бұрын

  I’ll make another video talking and showing the engine

• 
  @KKKMMMMMM Жыл бұрын

  Bad ass Ram! Are you running stock transmission?

• 
  @lenzking6360 Жыл бұрын

  Thank you and yes with a converter from edge performance 2800 stall

• 
  @lenzking6360 Жыл бұрын

  I’m swapping it soon to turn it up

• 
  @KKKMMMMMM Жыл бұрын

  @@lenzking6360 so looks like it’s been holding up well then? Has the trans thrown any codes or notice any slipping from the added power?

• 
  @lenzking6360 Жыл бұрын

  @@KKKMMMMMM no codes at all it’s a beast. I supercharged and cammed at 120k and now has 200k, and I daily it. I believe me I’ve put it through hell and it’s still here. They are strong. Only thing is that after a hard pull, the shift from 1st to 2nd does a thump when trans temp are high and when cool it goes away but that’s the converter. Beside that nothing and no slipping.

• 
  @KKKMMMMMM Жыл бұрын

  @@lenzking6360 that’s great to hear! The Procharger setup is becoming very tempting haha. Thanks!

• 
  @JoshHookerJoshhook123 Жыл бұрын

  What tranny do you have to support all that power?

• 
  @JoshHookerJoshhook123 Жыл бұрын

  I have an 07 I’m about to cam, what trans can we go to?

• 
  @mattcat234 Жыл бұрын

  Nice check engine light

• 
  @rickbaier1042 Жыл бұрын

  5.9 dodge Cummins and Durango guy says turn the key let's go

• 
  @Albertsuptosomething Жыл бұрын

  Ready when you are

• 
  @JesusTony Жыл бұрын

  Dope Asf 💯

• 
  @JesusTony Жыл бұрын

  You need more views 🔥 💯 I love dodge

• 
  @Albertsuptosomething Жыл бұрын

  Thank you man I’m trying trying to figure out KZreads algorithms

• 
  @JesusTony Жыл бұрын

  Pretty truck, and the time of day is perfect. Fits will with the video.

• 
  @Albertsuptosomething Жыл бұрын

  Thank you man

• 
  @projectdirtbikes Жыл бұрын

  119 in a 45! My mans living!🔥

• 
  @Albertsuptosomething Жыл бұрын

  😂😂😂

• 
  @zacharymelvin3487 Жыл бұрын

  How’s it drive with a 3k stall. Do you tow any

• 
  @Albertsuptosomething Жыл бұрын

  I love it I actually want to do 4500 stall next, it really woke the truck up compared to everything else except the procharger

• 
  @sexyrt3144 Жыл бұрын

  Thats an RT

• 
  @Albertsuptosomething Жыл бұрын

  @SexyRT are telling me it’s an RT or asking me if it is an rt ?

• 
  @blue9120 Жыл бұрын

  where you get your Hood from ?

• 
  @Albertsuptosomething Жыл бұрын

  Carid.com

• 
  @blue9120 Жыл бұрын

  @@Albertsuptosomething ok appreciate thanks

• 
  @Albertsuptosomething Жыл бұрын

  @@blue9120 no problem let me know how it goes

• 
  @blue9120 Жыл бұрын

  @@Albertsuptosomething your truck the nicest one I seen so far 🔥🔥🔥💯💯💯

• 
  @Albertsuptosomething Жыл бұрын

  @moneymike912 Thank you! that means a lot. Let me know if you have any questions.

• 
  @EliteMobileSolutions Жыл бұрын

  I'm adding to my 2007 dodge ram 1500 5.7l hemi as I'm typing this 😂 what tips or recommendations do you have for me

• 
  @Albertsuptosomething Жыл бұрын

  When I was stock I had the factory cats and straight pipe in to duals and I loved it. As for the tips don’t put the long tips they echo way to much!

• 
  @EliteMobileSolutions Жыл бұрын

  @@Albertsuptosomething do you think if I cut it all off and just go straight pipes from the headers I'll gain some mopowababe...? 🤣🤣

• 
  @Viper-no6wb Жыл бұрын

  it looked like it started slipping in 2nd Prime

• 
  @Albertsuptosomething Жыл бұрын

  No traction there, I was on 275s there now we on grippier 305s

• 
  @Viper-no6wb Жыл бұрын

  @@Albertsuptosomething ay btw so i have a 2007 ram 1500 with the 4.7, im building a 5.7 to throw in it, is it any reliable under boost or should i be actually building certain parts, any recommendations going with boost?

• 
  @Albertsuptosomething Жыл бұрын

  @@Viper-no6wb is the motor a eagle 5.7 or pre eagle?

• 
  @Viper-no6wb Жыл бұрын

  ​@@Albertsuptosomething is a Pre eagle engine out of a 2004 Ram so it doesnt have MDS just EGR

• 
  @Albertsuptosomething Жыл бұрын

  @@Viper-no6wb regap pistón for boost, redo the heads, arp head studs, mds delete, you can go with Holley high Ram and get the adaptor plates to make it fit, put some Ripp supercharger coil packs, get Texas speed cam and valve springs, higher volume oil pump, 1 7/8 long tube header and a good tuner. And add a 4000 stall converter from circle d for this setup. If you can do the forged internals do it.

• 
  @johndel2697 Жыл бұрын

  How much power

• 
  @Albertsuptosomething Жыл бұрын

  At the moment It’s currently 600 to the wheel

• 
  @franciscs1604 Жыл бұрын

  “MOPOWA BABE!!!” - #DonutMedia

• 
  @kbtrucks Жыл бұрын

  Wow that thing got up to 120 like nothing.

• 
  @seanbuchan2167 Жыл бұрын

  Fuckers badass. I’m starting to mod my 04 ram and this seriously gets me so pumped. Thanks for the video man.

• 
  @Albertsuptosomething Жыл бұрын

  Thank you. Glad you love the build. Any questions that you have feel free to ask.

• 
  @treystewart544 Жыл бұрын

  It’s like nascar racing with that Dodge Ram 1500 5.7 hemi

• 
  @tylerangel4073 Жыл бұрын

  You’ll need a new transmission in a week

• 
  @Albertsuptosomething Жыл бұрын

  Going on to 2 years now with this set up and still going strong, currently at 200k

• 
  @daninturrisi8610 Жыл бұрын

  545rfe?

• 
  @Albertsuptosomething Жыл бұрын

  Yea still the stock 545rfe

• 
  @NotFarmerFlats Жыл бұрын

  It's leaking at the exhaust manifold so bad I can't even hear the difference at idle LOL

• 
  @Albertsuptosomething Жыл бұрын

  Sorry I'll get a better angle , the sound echoes a bit from the Cutouts that lead the to the side exhaust even when they're closed.

• 
  @jesusmartinez38432 жыл бұрын

  That things fuckin sick bro I think ima do built tranny and cam head and intake on my truck

• 
  @Albertsuptosomething2 жыл бұрын

  That would help a lot, throw a higher stall converter if your going to do cams

• 
  @jesusmartinez38432 жыл бұрын

  @@Albertsuptosomething anything else for the tranny ?

• 
  @coltondowell13852 жыл бұрын

  What exhaust/headers are you running? Thing sounds awesome!

• 
  @Albertsuptosomething2 жыл бұрын

  I have have jba lontubes 1 7/8 headers that go into an electric cutout, when they are open they go to a straight pipe on both sides, when they are closed they go into a magnaflow muffler with quads in the back to quiet it down.