That rear bumper/valance ground effect is butt ass ugly

Where did you get the side skirts and SRT bumper? Is it a duraflex? Link?

@Albertsuptosomething

2 жыл бұрын

Carid.com and yes it's duraflex

@kenc.2448

2 жыл бұрын

@@Albertsuptosomething thanks for fast reply. Did you have body shop install or you did yourself? I’ve heard the lower part flexes a bit too high. Any tips if you did it yourself as for securing it? Does it rattle at high speeds?

@Albertsuptosomething

2 жыл бұрын

@@kenc.2448 It's no problem, we installed it our self and made a custom brace for it because it was flimsy and wouldn't was worried about higher speeds ripping it off

@Albertsuptosomething

2 жыл бұрын

@@kenc.2448 With the brace on, it was still on at 160 😅

@kenc.2448

2 жыл бұрын

@@Albertsuptosomething thank you. I have the same setup minus a cam. Any tips for boosted cams? Post pics or videos of the front of your truck. The 06-08 rams don’t get enough love.

Have you ran at the track, 1/4mile time? What mods were done on it here?

@Albertsuptosomething

2 жыл бұрын

Unfortunately I haven’t been to the track yet, i want to go after i put a new transmission in it. I had a custom grind cam, 4.56 rear gears, the procharger, longtube headers, upgraded fuel system, demon injectors, basically FBO

@rogeliogomez3845

2 жыл бұрын

@@Albertsuptosomething nice I have a similar set up. I’m thinking about going to tune at the same place you went to.

@Albertsuptosomething

2 жыл бұрын

@@rogeliogomez3845 where do you live? My tuners are located in Pompano in Florida

@rogeliogomez3845

2 жыл бұрын

I’m in belle glade. Not much tuners that’ll tune older models.

@Albertsuptosomething

2 жыл бұрын

@@rogeliogomez3845 trust me I know, we luckily you don’t live that far from my tuners. They are called American Muscle Performance.

The trim is only primer?

@Albertsuptosomething

3 жыл бұрын

😂😂 yes , don’t worry the car is already painted and i will be making an update video.

What did it put down and how many miles on the engine

@Albertsuptosomething

3 жыл бұрын

180k and 500 rwhp on 5 pounds, we will turn it up after the we throw in a turbo 400.

@rickgehring7507

2 жыл бұрын

@@Albertsuptosomething Why a TH400 ? you a 46RH is a bolt in swap, about 1/2 the price and will hold up to 1khp when done right.....don't get me wrong a TH400 when done right will take more HP but $ to $ 1k at the 1k hp and less level it's a waste of Money going TH400.

@Albertsuptosomething

2 жыл бұрын

@@rickgehring7507 to be honest i haven't looked into it an 46RH, I looked at the th400 to have a manual valve body

Like