Top Wrapz Ltd
We are a multi award winning Detailing | Wrap | Paint protection film specialist based in Birmingham, west midlands , UK. We are Gtechniq accredited, we are the official SUNTEK PPF install centre for the central Birmingham region and also the official invisiframe BIKE PPF installers. We are IMI recognised master level detailers, we were named detailer of the year 2019 and have proudly won awards for our work and unrivalled customer service. We bring passion and love to our work, put simply we aim to be the best! Be sure to check out our website and other social channels as we offer numerous services.
This Channel will also document other passions such as building project cars, riding, parts and materials testing.
social handles
Website - www.topwrapz.com
Facebook link - facebook.com/topwrapzltd/
Instagram - www.instgram.com/topwrapzltd/
Пікірлер
You’re order is ready 😂
How about audi a6 c7 facelift modell avant
Genuinely curious: Wouldnt it be easier to remove the trim pieces and wrap/spray them off the car? My understanding is that they can be removed easily...
I wish it was so simple. Most the time they buckle on removal, and actually wrapping these without them being held by the car would take much longer and likely lead to worse quality. Genuinely wrapping in place is important to a high quality finish. Good question.
@@topwrapzltd Thanks for taking the time to reply. I did wonder if maybe it was hard to remove them without breaking. Also, I take your point about work holding. I bet the trim pieces would be a struggle to hold on to. Cheers.
I am not caring about comfort, I only need performance
Then this is the seat for YOU.
Great job! looking to get some PPF however my front bumper has existing stone chip damage but is minimal and not peppered. Can you repair these with touch up paint before you apply PPF or is it best to get these repaired else where before coming to you
I'd just do a touch up then we can cover with paint protection film.. 👍🏾👍🏾 thanks for the comments .
Incompatible with crocs
Is the lhd quick release work on a rhd car ?
This is stunning. Might get mine booked in for some de chrome. You say at the end some of it isn’t perfect due to how hard it is. Can I ask which bits. I would probably want the window frames roof bars and lower skirt chrome bits done. So I am guessing the slightly easier bits as the front grill is very hard. 😂
The front grille was horrific to do. That will never be perfect. Thanks for comments means alot.
So can I just ask I take it you were really happy with other parts and they were not to bad to do. I will properly email you in next few weeks to get a quote.
How much did that cost ??
That is lit mate 🔥 Fab little cars, them
Like the name of the pink?
Bubblegum satin pink.
What is this color is this?
Good work. What's in the canister that you pressurized?
It's a slip solution specifically mixed for this windscreen film. Thanks for watching.
@@topwrapzltd May I ask what's in it to complete the instructions on installation?
Where do I buy this?
These were OEM BMW decals made by oracle .
Brilliant overview, enjoyed that 👌
Thanks Davey. Trying to do a almost what is detailing as easy to understand as possible.
What kind of rims are those?
260m cromodora e92 M3 wheels
What an absolute beauty! I have subscribed because I enjoyed every second of your video
Hemorrhoids are coming with them also!
Lollllll...... 🤣🤣
Still have this? Be interested in buying if want to sell?
Gets loads of offers on this all the time .... We still have it and it's near perfect now. Have a look at the video when we detailed it properly. Bloody beautiful thing. Doubt I'll sell it tbh it's too cool.
@@topwrapzltd I had one for 13 years but it still had the hydrogas suspension which let the handling down. Yours looks very clean, got a good buy. Enjoy 👍
@@philkeegan9449 thanks buddy, such a special little car that i was NEVER meant to fall in love with so much, it was just abit of a cool project car that i know cant let go of! The drive with the coilovers is frankly bonkers! like go kart!
@@topwrapzltd your not too far from me might pop by one day to see it 👍
@philkeegan9449 drop us a line before you come and I'll get the kettle on 👍🏾👍🏾👍🏾 cars on display in the shop.
the ammount of robbing cunts selling these with lotus engine covers is wild.
My daughter has just bought a fiesta, the fuel flap door doesn't lock, is it supposed to when you lock the car?
No locking cap on the fiesta ....
color combination lit
❤❤❤❤❤❤❤😊
I miss my Z4M roadster. It was so fun. Hope you’re enjoying yours.
I love this car. Owned.it from new 😍😍
Looks class! Years ago I was going to get my first E86 roof wrapped gloss black but with a jet canopy style like the Aston Martin Vanquish Red Arrows edition
That's a great idea and really unique
oof!!! That looks MEGA, enjoyed that real time install. 10/10 looks like factory paint ✅
Thanks davey this one turned out well, i'm hoping this will help people who have cars like yours who want to have a go at home!!
Was it originally a lesser spec model? Only reason I ask is because the GTI-16v's in that colour were a 1 of 500 limited edition with half leather and are worth a pretty penny nowadays. Really nice cars as i used to own one with a 1.8 VVC on solid cams, lightened and cage added. Also had turreted rear suspension and shocks added, with individualised Hydragas. But with the prices nowadays I wish I'd kept it standard and in storage. Someone has done a properly good job on that car. And that is probably one of the cleanest examples I've seen in a long time. The original Hydragas suspension is ok until you start adding power. Although the Rover Sport units were a bit better. Proper turrets and coilovers was always the way to go like this one though. Absolutely love it, and you got a new sub
I didn't know the GTi in that colour was rare..... However this is not an GTi shell it's from a lesser model with super low miles and pretty much ideal for me and I don't want the sunroof. Thanks for subbing , be sure the watch the othr videos with this car. Theirs one were we work on the bodywork and another one were we track it. Awesome little car and built so so so well.
How much would this cost to wrap a Tigra
Hi Mike , a couple of grand for sure..... This one was pretty expensive as the owner choose a very expensive colour way from Avery Dennison.
where did u get that device for the seat airbags
It came from America , or you can use a stock seat pad and place it under the seat . I went this option for the clean install.
Love the cinnamon and kiwi interiors for the M3. Top work again 👍
You have no pads and you're doing a comfort review? Really? Can you rename it to how comfortable is my towel review. Wow
You do know these are designed to be used without the pads ..... The towels their to protect the carbon. 🔔 End.
What a transformation - owner must be chuffed. Great work
Great job looks fantastic.
Thanks very much 😊
Top job,but it needs the badges de-chroming
I hear you buddy......I agree.
Nice work Byron
Thank you sir 😁
I've had mine only 7 Months but would love to upgrade mine when I can. You have an awesome Z4M, you've done a great job!!!!
Cheers buddy !!
Great tip thanks, I had no idea how to remove mine but may give it a go now. I have PPF on the front bumper but not covering it all and so obvious, it looks bad.
The PPF on my own car isn't perfect sadly, as it's all hand done on very early cars, I've really had to step away at times and just accept its protected , if you send me some pics via our watsapp line on the website, I may be able to give some pointers on how to improve it so you don't need to remove 👍🏾👍🏾.
@@topwrapzltd That's great, thanks you I will.
Excellent work Byron, love the content obviously, but the production values are much improved on your previous videos 👍
Hi flimper it's awesome to see you commet here thanks for the support , this is basically YOUR CAR lol 😆. Glad you enjoyed the video , lots of love the family and HNY buddy .
Flippin sweating here like it’s me doing that wrap ☝🏾👊🏾Damn 🙌🏾🤩
Lmao 🤣
Top Job🙏🏽
Thanks guys ..... 👍🏾♥️
You should have gotten the SE R line Black addition.
Agreed.... Wasn't available this side at the time sadly.
I just recently did the same thing when Jedi Survivor dropped. Haven't even turned Xbox on since.
It pained me so much to say..... I've spend the last decade waiting for Xbox to come out fighting . I had to concede, these next gen consoles are only as good as the games. I won't be going back to the series x. Infaxt I gave it to my 12 year old son who is Xbox mad and won't make the switch . Currently locked into GOT and loving gaming like I should be.
Are you serious???
Deadly. Xbox is only as good as the games ... Sick of waiting . Xbox SUCKS.
Hope you played god of war 2018 before ragnarok. Such a great storyline. Make sure you play the last of us part 1&2 too they’re awesome too
I haven't started GOW yet....... I'll get the 2018 before I start this one. Just finishing of GOT.... What a game.
I have always wondered what would happen if you close the door to quick, would it get trapped?
running back to the shop and try!!! lol
Going to try it now! lol
Another thing tó broke
What is it?
Gibt es keine fertig sets für den new Beetle? Sprich Vinyl schon zurecht geschnitten fertig für die Montage?
Your saying this is ceramic safe, what’s it ph level? I have my gtechniq coating, is this Jenny chem saying it’s sealant safe or gtechniq?
Beautiful job guys, that old Cloverleaf looks stunning, even on a cold dull day in Brum. Wow....
It was a coooollllldddd day 🤣