Пікірлер

• 
  @SamyHamSam3 сағат бұрын

  yoo i think my kfx400 needs valves or a new starter clutch would that be a reason for it not firing up?

• 
  @Rpmatuomoto3 сағат бұрын

  Big money Joe strikes again. The marketplace hunter. 🤣 That twist throttle is going to get you hurt.

• 
  @6lastresort3 сағат бұрын

  I would absolutely love to see you tear down an engine that has a ticking lifter. My car is doing it now and I’m very curious what that looks like internally.

• 
  @mauriceclark48704 сағат бұрын

  I knew. A guy. Had. A. RE. Consternation. Motor. Cycle. He would go for. A. Ride. Hear noises. From. Engine. Stop. And do. A partial. Strip of. Bike at the side. Of. Road. !!

• 
  @mauriceclark48704 сағат бұрын

  An. Engine. Tutorial. ..very. Interesting. For. Petrol. Heads. Great. !!!

• 
  @mauriceclark48705 сағат бұрын

  My. Son. And. I. Work. On. Guns. And. Have. If. You. Have. Right. Tools. You. Can. Tackle. Most. Problems. !!

• 
  @JohnHoskins425 сағат бұрын

  update?

• 
  @mauriceclark48705 сағат бұрын

  Buying. Pre owned is. Risky. !? As. I have. To my. Cost. Many. Times. !!

• 
  @mauriceclark48705 сағат бұрын

  Do. You. Ever. Get. Fitted. Up. Maced. Robbed ???

• 
  @user-np5rd6dg3o6 сағат бұрын

  That is a dog from one of the gears in the gearbox. I would be splitting the cases before I rode the quad anywhere.

• 
  @allecoosorio59716 сағат бұрын

  Where the honda gold wing 1000cc

• 
  @susdad6 сағат бұрын

  Dude I remember when it was you and your brother or somebody test riding these from your parents house

• 
  @stephenwalsh81846 сағат бұрын

  🏍👍👍

• 
  @tjvshim7 сағат бұрын

  Easy off the throttle mate, they will start a lot quicker and easier FFS

• 
  @martymcmannis65817 сағат бұрын

  I have a drz400 I think it's exactly the same motor. That hunk of metal probably came off the transmission (sorry to say) I know that I love my 05 400. Had it 8 years added oil, tires, and batteries . Hope you have the same luck after you fix your issues. Thanks for sharing

• 
  @lewisbaines88017 сағат бұрын

  That’s off gear ⚙️ mate . 👍

• 
  @kristoffernygard72557 сағат бұрын

  How many vehicles do you have now? :D

• 
  @cr250947 сағат бұрын

  Can anyone tell me what brand the red screw driver is he always uses.

• 
  @billgibbs50758 сағат бұрын

  I raced with the top pro's in the early 70's and I wish that I'd had a 'wrench' like this guy... WOW, he's really good!! 😂😂 😂😂😂😂😂

• 
  @robertfinnerty72018 сағат бұрын

  Joe look up a tool called the Shake N Break. It is an attchment for an air hammer that will take a screw bit. it allows you to provide turning action while vibration down on the screw. I have the impact breaker you use but when that doesn't work easily i go directly to the Shake N Break. The tool is around $60. Thank you for the excellent videos.

• 
  @redryderaus8 сағат бұрын

  31:38 Put it in neutral. Take it out of gear. Find something between first and second. Stop the rear wheel turning when you use the kick starter. If it is hard to kick when you hold the rear brake on then something is wrong. (I'm trying to find ways to state the obvious).

• 
  @DauntJura9 сағат бұрын

  Please keep washing the bikes! Loving the vids

• 
  @mauriceclark487010 сағат бұрын

  All. Those. Kicks. Are. Are. Killer. On your. Back and. Legs. Beware

• 
  @mauriceclark487010 сағат бұрын

  Are. You. Known. As. Motor. Doctor. Locally. ??

• 
  @Thor55555510 сағат бұрын

  the piece is part of a transmission gear (guess the 3. gear) which engages when moved by the gearfork.

• 
  @mauriceclark487010 сағат бұрын

  Are. You. Known. Lovely. As. Motor. Bike. Doctor. ??!!

• 
  @dreydj10 сағат бұрын

  Do you know how many subscribers you’ve made happy by simply washing the thing before wrenching on it? It’s going to be a good day today. :D

• 
  @Sunspot-1911 сағат бұрын

  Joe, it appears that somebody stood on the shift lever, trying to get it to shift. You are spot on in thinking that stray piece may have jammed things up. Well done, sir!!

• 
  @christopherquarry623411 сағат бұрын

  Like your channel and thank you

• 
  @BlairGuinea11 сағат бұрын

  Thanks Joe, another great vid, you the smart guy diagnosing the problem,

• 
  @urielsmachine99711 сағат бұрын

  I enjoy your content Joe, this one is special as it takes me back to my A10. Points were so simple to clean and adjust, just remember to check the condenser/ capacitor as it prevents point arcing. You are a good mechanic and an excellent presenter. Thanks mate!

• 
  @terrykuehn268611 сағат бұрын

  Hey Joe! You could probably use that induction plastic welding unit to heat up those little screw heads to loosen the lock tight and spin them out easy! Loving the videos bud and content!🤔😉👍📹💯✔️👋👋👋👋

• 
  @FSEVENMAN12 сағат бұрын

  Score😊

• 
  @wreckum5612 сағат бұрын

  That part looks like a drive dog off a gear. If your going to sell it I would replace that gear and save yourself a headache later on.

• 
  @floydbeattie265412 сағат бұрын

  Looks like a shifter dog off a gear to me. As far as the bent shifter shaft you have press and 2 v blocks I would straighten it . I've straighten many bent fork tubes the same way.

• 
  @markkerin569912 сағат бұрын

  The greatest miracle of modern science is how you didn't break the drill bit for the ezy out. The bend you had on it would have definitely broken on me.

• 
  @snowyowl704212 сағат бұрын

  Great video, nice quad. If not, parts, a planter, an anchore, play set for kids

• 
  @donpampel333212 сағат бұрын

  Joe Look at this screw remover By far the best investment I made working on old stuck screws. Shake N Break Air Impact Screw Remover.

• 
  @W.A.R.R.12 сағат бұрын

  Tip on tight phillips screws, use a normal screwdriver while putting pressure on the end by hand turn the screwdriver with a wrench. Gets them loose every time.

• 
  @user-qb8os8wq5u13 сағат бұрын

  Добрый день скажите пожалуйста за сколько можно купить такой в рублях

• 
  @Jmoney9259113 сағат бұрын

  Check the timing chain gear that piece could be from that but it kinda looks like part of the shift drum, plan on doing that timing chain to these ltzs go thru them fairly quickly, I bent a shift shift last year and found a lady on eBay that had one still sealed in Japanese packaging with the weird powder in it for 60 bucks

• 
  @jameshedrick60513 сағат бұрын

  That's how i got my 1st ATV. Was told it wouldn't go into gear got it home and looked at it a couple days later and found the drive belt self destructed. Lost that in storm after a tree fell on it and got my Bruin 350 last year from a friend and going to put nee cv axles in it later today after they get delivered

• 
  @craigkoch427713 сағат бұрын

  It's a part of the gear that is used when shifting gears. The lugs on the side of the gears that engage into the adjacent gear.

• 
  @leedimatteo507813 сағат бұрын

  04 had the updated frame i believe

• 
  @brandonmann173613 сағат бұрын

  Need a bigger hammer and that impact driver will work way better

• 
  @leedimatteo507813 сағат бұрын

  Sabo's gotta be watchin!!

• 
  @leedimatteo507813 сағат бұрын

  wow wee!!

• 
  @kencreten730813 сағат бұрын

  My guess before knowing is... not "knocking" thinking cam chain/valve area.

• 
  @ZachPowerSports13 сағат бұрын

  You’ll never know why I have this many likes

• 
  @majestic112013 сағат бұрын

  Fyi if you raise the blade on the circular saw so its 1/8 lower than the thickness of the material your cutting is safer an allows smoother straight cutting.