Пікірлер

• 
  @bryansmith736015 сағат бұрын

  Mines a 97. This is the only time I've had such a good view of the spark plugs on that side. They've always been an enigma. Between my hands and the plenum i couldn't see a thing.

• 
  @Squashstompedit2 күн бұрын

  Great video dawg. Perfect explanation

• 
  @kingoftrolls193 күн бұрын

  Hawk tuah

• 
  @westhavenor95135 күн бұрын

  I had to watch this video with English subtitles lol

• 
  @briangerth58937 күн бұрын

  dumb ways to die ...

• 
  @jesserobinson43208 күн бұрын

  I bumped mine with my damn elbow, and now i gotta now I got a weekend project.

• 
  @WilliamMunny-d8s8 күн бұрын

  I THINK THERES A RULE; if you make more than 1 reference to someone elses stuff, you need to plug or wear their merch ;-)

• 
  @ChristmanGarage8 күн бұрын

  I think your right👍😂

• 
  @FieldClosed10 күн бұрын

  No reciever drier replacement? I have one to replace mine but I can't find any information on them

• 
  @JeromeSnyder-e5k10 күн бұрын

  Awesome!! worked like a charm less than 10 minutes! Thank you so much.

• 
  @ChristmanGarage10 күн бұрын

  Awesome!👍

• 
  @CADuniversity10 күн бұрын

  thnk you!

• 
  @ChristmanGarage10 күн бұрын

  You're welcome!

• 
  @pat9870811 күн бұрын

  Thanks a bunch.

• 
  @ChristmanGarage10 күн бұрын

  You're welcome!

• 
  @djm622212 күн бұрын

  Thank you so much that is exactly what is wrong with mine. I'll let you know

• 
  @ChristmanGarage12 күн бұрын

  Awesome👍👍

• 
  @Al_W_On_The_Trackz13 күн бұрын

  You guys are hiLarious! 😂😂😂 I need some of that strawberry grease for my window. Can I use PB Blaster?

• 
  @ChristmanGarage13 күн бұрын

  😂😂

• 
  @almir-lq9qw14 күн бұрын

  Intake manifold issue and the tik issue from failed rocker sound so similar.

• 
  @joshstanz994315 күн бұрын

  Awesome video! Us DIY guys appreciate it very much. Any chance you have the part number still for those parts?

• 
  @ChristmanGarage15 күн бұрын

  I don’t have the numbers however I get 90% of my parts from O’Reillys and they are normally right on spot I do know that the kit I got was a felpro kit👍

• 
  @joshstanz994315 күн бұрын

  @@ChristmanGarage thank you!

• 
  @kaplanjc19 күн бұрын

  Thank you for your detailed video. Best one I saw to help me diagnose and replace my starter. Subscribed

• 
  @ChristmanGarage19 күн бұрын

  Awesome, thank you!👍

• 
  @painterlife199220 күн бұрын

  Do u got to unhook battery cables to do this?

• 
  @ChristmanGarage19 күн бұрын

  Yes battery should be unhooked first👍

• 
  @joshuacountryman250120 күн бұрын

  No new snap ring ?

• 
  @sergioadame553221 күн бұрын

  good video friend, is it possible to change the inner booth without removing the entire axel? thank you.

• 
  @ChristmanGarage21 күн бұрын

  Nope if you want to change a boot the axle has to be removed

• 
  @darkrainaldo391122 күн бұрын

  Hey man I just installed a level kit on my 2004 single cab Silverado but my shocks will no line up with the hole because the pressure the spring has I watched ur video on how to install the kit any suggestions?

• 
  @ChristmanGarage22 күн бұрын

  Yeah I’m pretty sure I had to extend the shocks on that job, if you have access to a welder you can make some extensions pretty quick and easy, maybe this helps👍 good luck

• 
  @hot-headedloosewire687823 күн бұрын

  How long can I keep driving the vehicle with this issue (crankshaft sensor) would it messed up some parts of the vehicle if I don't fixed it right away?

• 
  @ChristmanGarage23 күн бұрын

  This car went into “limp mode” and would barely go I wouldn’t recommend driving it too much as it may put you on the side of the road

• 
  @dl0204524 күн бұрын

  I cracked up when they came back to video after orifice tube removed he looked like he needed a moment 😂 thanks for making this video!

• 
  @ChristmanGarage24 күн бұрын

  😂😂😅😅

• 
  @Dragrof1-bs4tk25 күн бұрын

  How long would it take an amateur to do this?

• 
  @ChristmanGarage25 күн бұрын

  Probably an 8 hour day

• 
  @jamesstevenson311626 күн бұрын

  Also, dont forget to unhook the battery first :D

• 
  @alfig536827 күн бұрын

  You make it look easy. Good video. 👍

• 
  @jorgegonzales87829 күн бұрын

  What year did those rims came from?

• 
  @WillieBendicioАй бұрын

  Was the intake gasket blown

• 
  @ThommyDeeАй бұрын

  @ChristmanGarage - dude! Echoing those that have come before me in sharing THANKS for this video! My 2009 Sedona had the identical issues. I went a different path and ordered a OEM gear knob off Amazon and swapped it out in <3 minutes. Viola! Problem fixed - saving me GOBS of money for diagnostic + repairs. Thank you!!!

• 
  @ChristmanGarageАй бұрын

  Very cool!👍

• 
  @pablocruz74Ай бұрын

  You know I’ve never had an issue doing brakes in the 90s but after i got my 15 Silverado i was like wtf is this 💩😂 but after watching your video im ready to conquer that job

• 
  @spectrex1972Ай бұрын

  I've been suspecting this was where the problem existed on my Kia for some time. Guess this confirms it. Time to fix it. Thanks for the video.

• 
  @ChristmanGarageАй бұрын

  👍

• 
  @EnriqueJuarez-gf5stАй бұрын

  This helped me alot thank you sir

• 
  @ChristmanGarageАй бұрын

  Glad it helped

• 
  @andyoviatt7836Ай бұрын

  Miracle! Same problem, same solution. Thanks!

• 
  @ChristmanGarageАй бұрын

  Great!

• 
  @richardworks481Ай бұрын

  Dang son ,you made it look easy

• 
  @ChristmanGarageАй бұрын

  👍

• 
  @ct7625Ай бұрын

  So the wiper module can be opened up and repaired. Wipers on my 1999 MGM only work in high speed so when I move to low speed or intermittent I am removing power and wipers park anywhere.I Need them to work in low and intermittent to park properly. Multifunction resistance within specs on all speeds. Washer works but does not activate the wipers. So module or wiper motor?

• 
  @ChristmanGarageАй бұрын

  Without looking at a schematic I would guess the module , however I have seen a bad motor not park properly

• 
  @mattmonte2171Ай бұрын

  Yeah that really is unbelievable that you did that with a John Deere Gator a piece of s*** you could have doubled that distance with a Honda

• 
  @sidneycarpentero5429Ай бұрын

  Thank you for your help this video is very helpful..

• 
  @ChristmanGarageАй бұрын

  Glad it was helpful!

• 
  @ToyodaMaster-tq6htАй бұрын

  Hey brother, the four pin socket for that preload ring is W1272 at your local Oreilly store. The torque on that ring is 205 ft. lbs. (Yes I’ve got by using the punch & hammer too. But preload is important for longevity of that Bearing!). Thanks for the sockets and Rotor spacing tip! Two treated 4”x6” blocks 11” long stood on edge, with two thin steel plates on top makes your press cradle spacing (taller) deeper also.

• 
  @ChristmanGarageАй бұрын

  Awesome! Thanks for the tips👍

• 
  @jcflores4587Ай бұрын

  How do you clean it so clean with out scratching it ? What did you use

• 
  @ChristmanGarageАй бұрын

  I use an air die grinder or what I call a zizwheel with a 2” screw on pad that’s like a scouring pad.👍

• 
  @jonaseddy729Ай бұрын

  Hardly any audio

• 
  @ChristmanGarageАй бұрын

  Yep one of my earlier videos sorry about that

• 
  @josephcha1854Ай бұрын

  Cadillac converter. From Volkswagen to Cadillac. Lol!!!!

• 
  @kylecalhoun581Ай бұрын

  Don’t know if I lubricated it right? I sucked it off for 35ish seconds but the car didn’t really give any positive feedback

• 
  @ChristmanGarageАй бұрын

  😳😬😂

• 
  @walterhearon2382Ай бұрын

  Saved the day! Same exact thing on my 2014 Kia Sedona.

• 
  @ChristmanGarageАй бұрын

  Awesome glad to hear!!

• 
  @codythompson3323Ай бұрын

  How did you get the other bolt out? Swivel socket or what?.....

• 
  @ChristmanGarageАй бұрын

  I use a short socket with a wobble extension that usually gets on there pretty good

• 
  @TheREALOC1972Ай бұрын

  I have an 80 F100 that I'm wanting to lower.

• 
  @user-mc5ww7mn4rАй бұрын

  I wish I would of watched your video before I paid a locksmith to make a key! lol! It would have been a lot cheaper! lesson learned.

• 
  @ulyssesperez7431Ай бұрын

  Awesome video! I have a 94 F150 I’m in this Tx heat the AC works. After watching this video I want to do this. Whats a ballpark $ for parts and labor? thanks you

• 
  @ChristmanGarageАй бұрын

  I haven’t bought any of these parts in a while but if I had to make a guess just the compressor is probably around $200 not including everything else. I would probably budget around 5 or 6 hundred

• 
  @ulyssesperez7431Ай бұрын

  @@ChristmanGarage thanks brother 🙏

• 
  @Homero_SarabiaАй бұрын

  Good deal

• 
  @caoe1974Ай бұрын

  Straight to the point! Thumbs up my man!

• 
  @ChristmanGarageАй бұрын

  Thanks👍

• 
  @RonniejamesleoАй бұрын

  Boss has one that's leaking but he didnt hire me as a mechanic. He hired me to lay brick.

• 
  @danielgentry6278Ай бұрын

  So if it’s only a little fluid in the motor mount will it continue to drip

• 
  @ChristmanGarageАй бұрын

  No once the fluid is gone it quits but you may get a vibration or rattle because of the bad motor mount