Lowered my dad's 1986 F150 Bull Nose Square Body Ford
Жүктеу.....
Пікірлер: 36
@Kevlarel8410 ай бұрын
I liked the stock ride height. The stance was perfect with those tires.
@cesarnunez758710 ай бұрын
Nice truck brother looks good
@nickolas9238 Жыл бұрын
Can you please measure from the ground to the body above the front and rear tire please? Love what you did.
@nickolas9238 Жыл бұрын
Damn good video. Thank you.
@joemcguire2566 ай бұрын
Wish I could find bulls that nice. Mostly rusty junk around here. That's a high option f150. Factory sway bars and 9".
@-gravestonepros11 ай бұрын
No chance I'm trying this myself but it was fun watching you work!!
@ChristmanGarage
11 ай бұрын
Awesome👍 glad you enjoyed it!😁
@eddieboy93496 ай бұрын
Looks way better lowerr verry cool truck
@ChristmanGarage
6 ай бұрын
Thanks👍
@mickeythompson15627 ай бұрын
you got it perfect!
@UWPcustombaits Жыл бұрын
Nice edit on this one ! I hope this comment helps your algorithm.
@chrishigdon10705 ай бұрын
nice doing my 80 f-100 right now thanks for the video
@ChristmanGarage
5 ай бұрын
Awesome! Good luck👍
@brokewheels57 ай бұрын
Clean truck! Did removing the overload cause axle wrap?
@williamstafford9760 Жыл бұрын
Check out that fresh haircut
@horsiedАй бұрын
hell yeah
@JaimeAguilar-yg7jy3 ай бұрын
👍👍👍🤙🤙🤙
@TheREALOC1972Ай бұрын
I have an 80 F100 that I'm wanting to lower.
@holoholohaolenokaoi229911 ай бұрын
can you please be more specific on the results of just the helper leaf? how much drop did you get? i'm old and want to load motocross bikes into the bed.
@ChristmanGarage
11 ай бұрын
just the helper leaf didn't give me much only about an inch or so
@holoholohaolenokaoi2299
11 ай бұрын
@@ChristmanGarage thanks🤙
@jorgegonzales87829 күн бұрын
What year did those rims came from?
@augustshades6 ай бұрын
hey that duck on the hood is from that movie deathproof. but what is it actually from?
@ChristmanGarage
6 ай бұрын
Not familiar with deathproof but it was in the movie convoy it was the rubber duck’s hood ornament on his truck👍
@williamhollowell477711 ай бұрын
Are those 15x10 wheels on the back. What is the backspacing on the wheels
@ChristmanGarage
11 ай бұрын
They are stock wheels off a newer year model 15x8, I have never measured the backspacing sorry.
@josemrodriguez3727 ай бұрын
I just picked up a 81 bully, I wonder if there's a co.out their that offers a kit
@joemcguire256
6 ай бұрын
DJM has 3/5 and 2/4, Belltech has 2/4. You can use newer beams with newer spindles.
@EdwinHerrera-ew7rk10 ай бұрын
How did you bend the coil spring to give it the D shape ?
@ChristmanGarage
10 ай бұрын
Heat one small spot with a torch and bend it over👍
@mblake0420 Жыл бұрын
How does it ride?
@ChristmanGarage
Жыл бұрын
Rides just about the same just a little stiffer in the front but not really enough to notice
@carolchristman2139 Жыл бұрын
You made it look to easy 🤔
@bryanfogle6672 Жыл бұрын
Lose the toolbox and rails.
@carolchristman2139
Жыл бұрын
I can't its my work truck and I keep a chain to pull EV 😂😂
Пікірлер: 36
I liked the stock ride height. The stance was perfect with those tires.
Nice truck brother looks good
Can you please measure from the ground to the body above the front and rear tire please? Love what you did.
Damn good video. Thank you.
Wish I could find bulls that nice. Mostly rusty junk around here. That's a high option f150. Factory sway bars and 9".
No chance I'm trying this myself but it was fun watching you work!!
@ChristmanGarage
11 ай бұрын
Awesome👍 glad you enjoyed it!😁
Looks way better lowerr verry cool truck
@ChristmanGarage
6 ай бұрын
Thanks👍
you got it perfect!
Nice edit on this one ! I hope this comment helps your algorithm.
nice doing my 80 f-100 right now thanks for the video
@ChristmanGarage
5 ай бұрын
Awesome! Good luck👍
Clean truck! Did removing the overload cause axle wrap?
Check out that fresh haircut
hell yeah
👍👍👍🤙🤙🤙
I have an 80 F100 that I'm wanting to lower.
can you please be more specific on the results of just the helper leaf? how much drop did you get? i'm old and want to load motocross bikes into the bed.
@ChristmanGarage
11 ай бұрын
just the helper leaf didn't give me much only about an inch or so
@holoholohaolenokaoi2299
11 ай бұрын
@@ChristmanGarage thanks🤙
What year did those rims came from?
hey that duck on the hood is from that movie deathproof. but what is it actually from?
@ChristmanGarage
6 ай бұрын
Not familiar with deathproof but it was in the movie convoy it was the rubber duck’s hood ornament on his truck👍
Are those 15x10 wheels on the back. What is the backspacing on the wheels
@ChristmanGarage
11 ай бұрын
They are stock wheels off a newer year model 15x8, I have never measured the backspacing sorry.
I just picked up a 81 bully, I wonder if there's a co.out their that offers a kit
@joemcguire256
6 ай бұрын
DJM has 3/5 and 2/4, Belltech has 2/4. You can use newer beams with newer spindles.
How did you bend the coil spring to give it the D shape ?
@ChristmanGarage
10 ай бұрын
Heat one small spot with a torch and bend it over👍
How does it ride?
@ChristmanGarage
Жыл бұрын
Rides just about the same just a little stiffer in the front but not really enough to notice
You made it look to easy 🤔
Lose the toolbox and rails.
@carolchristman2139
Жыл бұрын
I can't its my work truck and I keep a chain to pull EV 😂😂
it looked better before