I like this setup. May I suggest adding a piece of 1/2” or thicker Plywood under your IKEA drawer to help with clearance. I want to do something similar with my xterra Which IKEA drawers are these?
@conheck_offroad21 күн бұрын
I forget the name of the drawers. But they only cost roughly $100. I have them at that height to match the height of the fridge. Otherwise I would have kept the base plate of the drawers to have the clearance
@0z._21 күн бұрын
👍
@venzfinest652125 күн бұрын
How can I get in contact with you to get guidance, so many questions? lol
@conheck_offroad24 күн бұрын
Instagram
@ltx38325 күн бұрын
What’s the ground clearance on that gorilla?
@conheck_offroad25 күн бұрын
Haven’t measured it since putting the 38s on. But it’s a good number 😎
@themaidenrisesyep266526 күн бұрын
V8!!!!!
@conheck_offroad26 күн бұрын
😎😎😎
@RyanBennett_Gpd60527 күн бұрын
I went from the 4.0 Xterra to a V8 Pathfinder. Nothing beats the sound of a roaring V8 lol
@conheck_offroad26 күн бұрын
Couldn’t agree more!!
@JRJROFFROAD27 күн бұрын
Looks sick man glad this popped up on my feed. Long live the V8
@conheck_offroad27 күн бұрын
Thanks! Definitely loving the v8!
@shawntallman626327 күн бұрын
First video I'm new. Is your X vk56 swapped? Sounds good.
@conheck_offroad27 күн бұрын
It is swapped! I just released a vk swap breakdown video. It’s got lots of audio clips if you want to hear more! 😎
@justind963126 күн бұрын
@@conheck_offroadnice vid man you got me wanted to buy a Tera to start building it
@conheck_offroad26 күн бұрын
@justind9631 you definitely should!
@Noobcake46027 күн бұрын
We need a full walk around of your Xterra!!!!!
@conheck_offroad27 күн бұрын
If I did a full walk around the video would be so long! I’ve got another video coming out next week that breaks down my diy interior setup. So be sure to check that out. What else would you like to see?
@RiZZOBE4R27 күн бұрын
That thing is a monster! Is it SAS'd Thank you for the video 🤙🏽
@conheck_offroad26 күн бұрын
Still ifs
@chrisyates240228 күн бұрын
Nice Rig setup i have a 2006 xterra 2 1/2 lift on 33s atm mybe someday mine will be there lol Have a Question i cant find anywhere online No Power to my Power Windows checked link fuse under hood still good mirror and locks work but no window could you send me in the right direction and thxs
@conheck_offroad27 күн бұрын
The motor probably needs to be replaced
@louisanthony26628 күн бұрын
Looks awesome! Great build. I sold my xterra last year. Had an OME 1 1/2 inch lift with 33 in tires. It was fun to drive. Hope Nissan brings them back into production in America.
@conheck_offroad28 күн бұрын
We can only hope and pray 🙏🏻 😂
@thedude828-ed2nn28 күн бұрын
It looks like the engine bay was made for the vk56 it fits perfectly.
@conheck_offroad28 күн бұрын
It really was! So much more room to work on it then with the vq
@oswaldoaguilar993328 күн бұрын
Thanks for the thorough video.
@conheck_offroad25 күн бұрын
Glad it was helpful!
@BrwnShinobi28 күн бұрын
MF GOALS!! Nicely done!
@conheck_offroad28 күн бұрын
Thank you! Super happy with how the rig has turned out over the years!
@thneal201128 күн бұрын
Sounds killer and looks super sick on those 38s. Have '11 Pro 4x 6spd. Thinking of doing this now except for the transmission issue. Thoughts?
@conheck_offroad28 күн бұрын
There is an adapter plate that you can get for the manual transmission. Other than that, I don’t know too much more since I didn’t deal with that, but I do know it is possible to use it with a manual.
@franklinwill2228 күн бұрын
Im moving to Maryland what are the restrictions to getting emissions registered Xterra?
@conheck_offroad28 күн бұрын
Restrictions? Not too sure. I just know that it has to pass inspection and emissions test to be able to be registered.
@pluto4742128 күн бұрын
Which spacers should I get for my 02 Terra, I’m scared to touch it and get something wrong and links if you can
@conheck_offroad28 күн бұрын
I’d recommend going with bora offroad spacers. They can make you a custom spacer specifically designed for your bolt pattern
@pluto4742128 күн бұрын
@@conheck_offroad how much was yours?
@conheck_offroad28 күн бұрын
The ones in this video are spider trax spacers. And a set of two cost roughly $150. the ones that I run now are bora Offroad, and they will cost north of $200, If I remember correctly.
@vict103629 күн бұрын
Those are 17inch wheels, not 16. It says it on the tire
@conheck_offroad25 күн бұрын
Nice catch
@franklinwill22Ай бұрын
Your channel is very informative....keep them coming.
@conheck_offroadАй бұрын
Glad you like the videos!
@onefastr6Ай бұрын
I didn’t see any mice.
@conheck_offroadАй бұрын
Miced as is microphone
@onefastr6Ай бұрын
@@conheck_offroad Was a joke. Believe you mean “mic’d” not miced homie.
@phetinsixiengmay9027Ай бұрын
Man them 37’s look so good on your rig bro ❤👍
@conheck_offroadАй бұрын
Those are 38s in that video
@phetinsixiengmay9027Ай бұрын
@@conheck_offroad looks good, just an inch off👍
@conheck_offroadАй бұрын
I run the 37s in the winter with studs
@Hondo-kj8hiАй бұрын
Your rig is lookin' Xtra Spicy! Ha. 💥👊🏻💥
@conheck_offroadАй бұрын
Thanks!! 🫡
@allanyjАй бұрын
looks like the video has some kinda of overlay which darkens the whole video.
@conheck_offroadАй бұрын
Make sure to watch with full brightness on your phone or tablet. I noticed the same thing when I tried to watch it at a lower brightness
@allanyjАй бұрын
@@conheck_offroad I was using windows with the highest brightness. btw, would you please share URL for front and rear bumper where you bought from, Thanks^
@conheck_offroadАй бұрын
@allanyj I have install videos for both of those products on my page
@offroadherАй бұрын
LOVEEEEEEE!!!!! ❤❤❤
@conheck_offroadАй бұрын
😊😊😊
@joekloiber887Ай бұрын
🔥
@everett6733Ай бұрын
Woah, how is the topographic design a wrap? That’s awesome
@conheck_offroadАй бұрын
Thanks! I love how it came out!
@tyranitarxd2819Ай бұрын
Needs less music. Lemme hear that v8
@conheck_offroadАй бұрын
Next time 😎
@BraddahmattАй бұрын
How do you have so much clearance over the coil bucket? I have the Titan swap Radflo coil overs.... im hitting the coil bucket almost 1.5" before full droop. So bummed I wasted money on this. Z1 is also no help
@conheck_offroad25 күн бұрын
You have to trim the coil bucket a bit
@MrMerican872 ай бұрын
I’m getting the radflos but my upper control arm is touching the inside of my wheel well with Rancho shocks, will this change once I add the radflos ? I have the titan suspension for my x
@user-mx2ny7uv7u2 ай бұрын
Good job! 👍 Like steps to install UCA's. Do you have videos on your wheel setup, I was wondering how you go from stock to the size on this Xterra? 🙂
@conheck_offroad2 ай бұрын
In that video I have 35s. But I’m now running 38x13.5 in the summer and 37x14.5 in the winter. I’ve got a video on how I fit those on my channel as well
@anthonyazais35412 ай бұрын
Glad you made the video. I agree with the pics provided not very good. Just gotta get my raptor liner on mine amd can install
@joekloiber8872 ай бұрын
Great song to this short 🤙🏼🤙🏼 2nd gen life
@vit2202 ай бұрын
Hi man! Just found your channel! Please make a video about the swap and the costume work you did to it!! I love the pair !
@conheck_offroad2 ай бұрын
I’ve got a video in the works
@macy7253 ай бұрын
One of the bolts in my sway bar bracket sheered off. So looks like th whole thing is coming off.
@TrepidDestiny3 ай бұрын
Hey thanks for this. My sway bar is literally snapped in half and I was worried this was going to be a project unto itself.
@silmcdon3 ай бұрын
What gen is that?
@conheck_offroad3 ай бұрын
Gen 2
@antoniomartinez83003 ай бұрын
👍👍👍 nice 👌 go, NISSAN XTERRA
@michalkrupp35323 ай бұрын
next time go somewhere you are capable
@skullfan333 ай бұрын
Ty so much for the quick answers I'm am now subscribed to your Chanel!
@conheck_offroad3 ай бұрын
No problem! Glad the video helped!
@skullfan333 ай бұрын
Looks like tires would hit the fenders on upward travel?????
@conheck_offroad3 ай бұрын
No issues with uptravel on this setup
@skullfan333 ай бұрын
@@conheck_offroad wondering if a 2" lift on my 2015 pro4x front and rear with 285/75r16 tires woukd have trouble with the fenders?
@conheck_offroad3 ай бұрын
You should be able to tuck them
@skullfan333 ай бұрын
@@conheck_offroad they would be on the factory rims.
@skullfan333 ай бұрын
@@conheck_offroad if I used the 1" spacer
@skullfan333 ай бұрын
How big is your lift?
@conheck_offroad3 ай бұрын
At the time of this video I had a 3” lift.
@carlosizz893 ай бұрын
Haha need a buddy with a fronty to haul your tires?😂😂. Nice color on a sweet rig. Hows the fuel consumption now? Smiles per gallon yet haha
@conheck_offroad3 ай бұрын
Yeah having a buddy with a fronty would be nice lol! I get about 10-12 mpg
@MrMerican873 ай бұрын
How are people putting 42’s on ? Also what’s your opinion on SAS swap ? I don’t think I’m a do it on my X and just buy a 90’ ranger or Toyota and try it on that. I did just finish my titan upper and control arms for my X.
@MillerMcLeod3 ай бұрын
Living the DREAM with that Xterra build. One day I'll be able to afford it lol. Great video mate cheers
Пікірлер
I want
You need! 😎
Did you wrapped the Nissan for that color??
Yes I did!
everyone of you are insane.....yikes
Just a little bit 🤣
😂that thing is so Siiiiiiick!
🫡🫡🫡
I like this setup. May I suggest adding a piece of 1/2” or thicker Plywood under your IKEA drawer to help with clearance. I want to do something similar with my xterra Which IKEA drawers are these?
I forget the name of the drawers. But they only cost roughly $100. I have them at that height to match the height of the fridge. Otherwise I would have kept the base plate of the drawers to have the clearance
👍
How can I get in contact with you to get guidance, so many questions? lol
Instagram
What’s the ground clearance on that gorilla?
Haven’t measured it since putting the 38s on. But it’s a good number 😎
V8!!!!!
😎😎😎
I went from the 4.0 Xterra to a V8 Pathfinder. Nothing beats the sound of a roaring V8 lol
Couldn’t agree more!!
Looks sick man glad this popped up on my feed. Long live the V8
Thanks! Definitely loving the v8!
First video I'm new. Is your X vk56 swapped? Sounds good.
It is swapped! I just released a vk swap breakdown video. It’s got lots of audio clips if you want to hear more! 😎
@@conheck_offroadnice vid man you got me wanted to buy a Tera to start building it
@justind9631 you definitely should!
We need a full walk around of your Xterra!!!!!
If I did a full walk around the video would be so long! I’ve got another video coming out next week that breaks down my diy interior setup. So be sure to check that out. What else would you like to see?
That thing is a monster! Is it SAS'd Thank you for the video 🤙🏽
Still ifs
Nice Rig setup i have a 2006 xterra 2 1/2 lift on 33s atm mybe someday mine will be there lol Have a Question i cant find anywhere online No Power to my Power Windows checked link fuse under hood still good mirror and locks work but no window could you send me in the right direction and thxs
The motor probably needs to be replaced
Looks awesome! Great build. I sold my xterra last year. Had an OME 1 1/2 inch lift with 33 in tires. It was fun to drive. Hope Nissan brings them back into production in America.
We can only hope and pray 🙏🏻 😂
It looks like the engine bay was made for the vk56 it fits perfectly.
It really was! So much more room to work on it then with the vq
Thanks for the thorough video.
Glad it was helpful!
MF GOALS!! Nicely done!
Thank you! Super happy with how the rig has turned out over the years!
Sounds killer and looks super sick on those 38s. Have '11 Pro 4x 6spd. Thinking of doing this now except for the transmission issue. Thoughts?
There is an adapter plate that you can get for the manual transmission. Other than that, I don’t know too much more since I didn’t deal with that, but I do know it is possible to use it with a manual.
Im moving to Maryland what are the restrictions to getting emissions registered Xterra?
Restrictions? Not too sure. I just know that it has to pass inspection and emissions test to be able to be registered.
Which spacers should I get for my 02 Terra, I’m scared to touch it and get something wrong and links if you can
I’d recommend going with bora offroad spacers. They can make you a custom spacer specifically designed for your bolt pattern
@@conheck_offroad how much was yours?
The ones in this video are spider trax spacers. And a set of two cost roughly $150. the ones that I run now are bora Offroad, and they will cost north of $200, If I remember correctly.
Those are 17inch wheels, not 16. It says it on the tire
Nice catch
Your channel is very informative....keep them coming.
Glad you like the videos!
I didn’t see any mice.
Miced as is microphone
@@conheck_offroad Was a joke. Believe you mean “mic’d” not miced homie.
Man them 37’s look so good on your rig bro ❤👍
Those are 38s in that video
@@conheck_offroad looks good, just an inch off👍
I run the 37s in the winter with studs
Your rig is lookin' Xtra Spicy! Ha. 💥👊🏻💥
Thanks!! 🫡
looks like the video has some kinda of overlay which darkens the whole video.
Make sure to watch with full brightness on your phone or tablet. I noticed the same thing when I tried to watch it at a lower brightness
@@conheck_offroad I was using windows with the highest brightness. btw, would you please share URL for front and rear bumper where you bought from, Thanks^
@allanyj I have install videos for both of those products on my page
LOVEEEEEEE!!!!! ❤❤❤
😊😊😊
🔥
Woah, how is the topographic design a wrap? That’s awesome
Thanks! I love how it came out!
Needs less music. Lemme hear that v8
Next time 😎
How do you have so much clearance over the coil bucket? I have the Titan swap Radflo coil overs.... im hitting the coil bucket almost 1.5" before full droop. So bummed I wasted money on this. Z1 is also no help
You have to trim the coil bucket a bit
I’m getting the radflos but my upper control arm is touching the inside of my wheel well with Rancho shocks, will this change once I add the radflos ? I have the titan suspension for my x
Good job! 👍 Like steps to install UCA's. Do you have videos on your wheel setup, I was wondering how you go from stock to the size on this Xterra? 🙂
In that video I have 35s. But I’m now running 38x13.5 in the summer and 37x14.5 in the winter. I’ve got a video on how I fit those on my channel as well
Glad you made the video. I agree with the pics provided not very good. Just gotta get my raptor liner on mine amd can install
Great song to this short 🤙🏼🤙🏼 2nd gen life
Hi man! Just found your channel! Please make a video about the swap and the costume work you did to it!! I love the pair !
I’ve got a video in the works
One of the bolts in my sway bar bracket sheered off. So looks like th whole thing is coming off.
Hey thanks for this. My sway bar is literally snapped in half and I was worried this was going to be a project unto itself.
What gen is that?
Gen 2
👍👍👍 nice 👌 go, NISSAN XTERRA
next time go somewhere you are capable
Ty so much for the quick answers I'm am now subscribed to your Chanel!
No problem! Glad the video helped!
Looks like tires would hit the fenders on upward travel?????
No issues with uptravel on this setup
@@conheck_offroad wondering if a 2" lift on my 2015 pro4x front and rear with 285/75r16 tires woukd have trouble with the fenders?
You should be able to tuck them
@@conheck_offroad they would be on the factory rims.
@@conheck_offroad if I used the 1" spacer
How big is your lift?
At the time of this video I had a 3” lift.
Haha need a buddy with a fronty to haul your tires?😂😂. Nice color on a sweet rig. Hows the fuel consumption now? Smiles per gallon yet haha
Yeah having a buddy with a fronty would be nice lol! I get about 10-12 mpg
How are people putting 42’s on ? Also what’s your opinion on SAS swap ? I don’t think I’m a do it on my X and just buy a 90’ ranger or Toyota and try it on that. I did just finish my titan upper and control arms for my X.
Living the DREAM with that Xterra build. One day I'll be able to afford it lol. Great video mate cheers
Thanks! 🙏🏻
I have the power of 50 likes