Putting 37s on my Nissan Xterra

Автокөліктер мен көлік құралдары

Everything you need to know about putting 37s on your Nissan Xterra!
Also how to install Apex Designs rapid deflate valves
Check out my amazon storefront where I have gathered a list of awesome gear that I personally use!
www.amazon.com/shop/conheck_o...
And be sure to follow me on Instagram ‪@conheck_offroad‬

Пікірлер: 37

  • @boboyamamoto
    @boboyamamoto4 ай бұрын

    If you link the rear end you'll probably need to run coilovers and bypass, if you run a regular shock with a regular coil, like the 4runners, you will notice a progressive loss of stiffness due to the 1k+ of constant extra body fat your X is running. Coils by themselves aren't meant to handle a lot of added constant weight where as a coilover is, the only thing a coilover lacks is the lack of sensitivity, where as a bypass helps in regulating compression and rebound throughout the stroke/travel. Probably need to cut up the wheel wells and make some new ones along with shock brackets/hoops to have an outboard setup and Frankenstein a CJD 4 link setup from a Frontier. Also probably a trussed Dana 70, rather than the titan m226 and more so for 37s. You'll just have to mess around with the yoke and propeller shaft but a drive shaft shop should figure that out easily. For shock help/setup probably ask Ben from Filthy Motorsports or the guys over at Carbon Shock Technologies since your X with the 4 link will be one of the few pioneering into that territory

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    There is an xterra local to me that is sas and linked on 40s. He owns the shop that I get all my work done. Probably gunna have them do it since they know how to do it

  • @amersadiq5105
    @amersadiq51054 ай бұрын

    That rig is beautiful ! Keep those videos comin pls :)

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    More to come!

  • @oswaldoaguilar9933
    @oswaldoaguilar99334 ай бұрын

    X looks really coo.

  • @MrMerican87
    @MrMerican872 ай бұрын

    How are people putting 42’s on ? Also what’s your opinion on SAS swap ? I don’t think I’m a do it on my X and just buy a 90’ ranger or Toyota and try it on that. I did just finish my titan upper and control arms for my X.

  • @everett6733
    @everett6733Ай бұрын

    Woah, how is the topographic design a wrap? That’s awesome

  • @conheck_offroad

    @conheck_offroad

    Ай бұрын

    Thanks! I love how it came out!

  • @carlosizz89
    @carlosizz892 ай бұрын

    Haha need a buddy with a fronty to haul your tires?😂😂. Nice color on a sweet rig. Hows the fuel consumption now? Smiles per gallon yet haha

  • @conheck_offroad

    @conheck_offroad

    2 ай бұрын

    Yeah having a buddy with a fronty would be nice lol! I get about 10-12 mpg

  • @ravholly
    @ravholly3 ай бұрын

    Dude, I’m just wanting 35’s!

  • @shawntallman6263
    @shawntallman62632 күн бұрын

    First video I'm new. Is your X vk56 swapped? Sounds good.

  • @conheck_offroad

    @conheck_offroad

    2 күн бұрын

    It is swapped! I just released a vk swap breakdown video. It’s got lots of audio clips if you want to hear more! 😎

  • @justind9631

    @justind9631

    2 күн бұрын

    @@conheck_offroadnice vid man you got me wanted to buy a Tera to start building it

  • @conheck_offroad

    @conheck_offroad

    2 күн бұрын

    @justind9631 you definitely should!

  • @carsonhowalt4712
    @carsonhowalt47124 ай бұрын

    What did they use in the front wheel well to make the black (rubber) transition piece? Looks really well done.

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    It’s all metal welded into place. They cut out the pinch seam and welded a plate in its place

  • @jasco1776
    @jasco17764 ай бұрын

    Awesome setup!! Love the work you’re putting into the X👍🏼 Do your 4.10 gears run silently? About how much did it cost to regear both diffs?

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    What do you mean by run silently?

  • @jasco1776

    @jasco1776

    4 ай бұрын

    Without any gear whine

  • @jasco1776

    @jasco1776

    4 ай бұрын

    @@conheck_offroad kzread.info2cd8iT8pxqA?feature=shared

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    No I don’t have great whine

  • @Flying_Dollar_Motorsports
    @Flying_Dollar_Motorsports4 ай бұрын

    I think they'll fit fine. As long as you never intend to turn your wheels.

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    🤣

  • @Flying_Dollar_Motorsports

    @Flying_Dollar_Motorsports

    4 ай бұрын

    I legit posted that before you showed it hitting the slider. But I have 35s and can get a little touch now and then. Wasn't anticipating how close that back tire was gonna be to the front of the rear wheel well though😮. You seem to be pretty easy on the throttle like me but I'm worried for your front axles with all that unsprung weight

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    @Flying_Dollar_Motorsports I’ve yet to wheel them, but we got spares just in case

  • @Flying_Dollar_Motorsports

    @Flying_Dollar_Motorsports

    4 ай бұрын

    @@conheck_offroad The wheels look awesome with that wrap. I just put new Mickeys on mine and wanted to upgrade to a bronze 18" wheel but I couldn't bring myself to spend the money. Just kept my black 16" wheels but now that I see yours, I'm regretting not just going for it. So thanks for that! Lol

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    @Flying_Dollar_Motorsports hahaha yeah the bronze looks good. These are black rhino raids. 17s

  • @chatnavz
    @chatnavz4 ай бұрын

    You regeared? I'm dying to go on 37s lol…just installed a drop bracket wit tswappd

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    Not sure what you mean by reheated

  • @chatnavz

    @chatnavz

    4 ай бұрын

    @@conheck_offroad regeared lol

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    @chatnavz oh! Yeah I’m on 4.10s

  • @reaganloggins4519
    @reaganloggins45194 ай бұрын

    what seat covers are those?

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    They’re from RuffTuff

  • @mojosodope0230
    @mojosodope02304 ай бұрын

    Can I put 35 on a 2.5 in lift?

  • @conheck_offroad

    @conheck_offroad

    4 ай бұрын

    With a lot of cutting you can lol

Келесі