03/04 Terminator Cobra and with a KB super charger. Dream. It's best mustang they ever made to this day SVT 💪💯
@cryptoguru9443 күн бұрын
Do the roots style always make more than the centrifugal style superchargers? I have a 99 cobra and currently have a Vortech supercharger on it. Thinking about swapping that set up for a Whipple or a Kenny belle. I had a 2003 cobra when they were brand new but I didn’t swap the blower out. Just pullied it.
@andrei19714 күн бұрын
I'm curious as to what colors these are called.. Is your Mustang Torch Red or Laser Red? Also was the previous/old head lights smoked? Or were they just black housing?
@CertifiedRippers4 күн бұрын
@@andrei1971 They were slightly smoked, and the car is torch red. Thanks for watching!
@Grimmjaw1875 күн бұрын
Only rebar in the footings ? None in the main slab or at least mesh?
@CertifiedRippers5 күн бұрын
@@Grimmjaw187 the modern day technology in concrete is crazy. It’s got characteristics like fiber. They actually only needed to use rebar in the footings to pass code.
@ranware907110 күн бұрын
4.6 4v was nothing to play with then..... it for damn sure isn't to be played with now. It was gapping 5.7,6.0,6.2,7.0 same thing different names 🤣
@TopMach113 күн бұрын
Well that was a waste of time...
@CertifiedRippers13 күн бұрын
@@TopMach1 I’m sorry you feel that way. Ultimately this video was just having some fun with the donor vehicle for our new mach 1 project
@TopMach113 күн бұрын
@@CertifiedRippers what motor you putting in the Mach1?
@CertifiedRippers12 күн бұрын
@@TopMach1 the 351 Windsor out of this van
@TopMach112 күн бұрын
@@CertifiedRippers bro come on if you dont put a 4v in there its a Disgrace
@AwesomeFinish12 күн бұрын
@@TopMach1well we could have left the Mach shell sitting in the grassy field where we found it... At least we aren't putting an LS in it.
@charlesdickens968513 күн бұрын
i think your bunch of morrons
@lyladaisie14 күн бұрын
Free car parts!?
@deenation11015 күн бұрын
Looks great, but no rebar outside on the concrete
@anytractorman18 күн бұрын
Compressor should be closer to the main box. I found outthe hard way. Let the smoke out of the motor
@fidelserrano716423 күн бұрын
00 pp000000000000000099000009
@JerryEly24 күн бұрын
Hello what extension cord can I use what gauge ???
@CertifiedRippers24 күн бұрын
I’m not sure. I’d look up the manual on the welder.
@dennisbard873826 күн бұрын
wow those mustangs are proper sleeper builds
@gillyb33328 күн бұрын
❤ great video sending regards from Australia ❤
@ancientcityaquatics942829 күн бұрын
nice .. i live down the street from you .. this looks great .. hope nothing but the best for you
@CertifiedRippers28 күн бұрын
Thanks!
@willyfriesen245129 күн бұрын
Great video. Looking forward to part 2 of the shop build
@CertifiedRippers29 күн бұрын
Coming soon!
@comfort_in_discomfort29 күн бұрын
New sub here. Love the get it done attitude my man. Take in the memories you and your dad will make in this shop. Awesome. I'm along for the ride!
@CertifiedRippers29 күн бұрын
Thanks for watching and the kind words man! Hope you enjoy the future content as well
@Dozz7029 күн бұрын
How tall is it to the eve....16 or 18ft and did you use Satin or Flat black on the ceiling? Thank You Looks great
@CertifiedRippers29 күн бұрын
16ft
@CertifiedRippers29 күн бұрын
Flat black on the ceiling
@abdushakoorjamalmokalane171929 күн бұрын
Great energy folks
@derekh95729 күн бұрын
Use MC connectors going into the panel, you don't want MC sheathing inside a panel like that.
@CertifiedRippers29 күн бұрын
We are gonna change it soon. I’m gonna run conduit up the wall
@AwesomeFinish28 күн бұрын
The MC connectors were twice the price of these basic clamps. The electrical inspections were already done so I used the basic clamps. The MC sheathing is pretty far away from any live contacts so it'll be fine.
@taterfab884529 күн бұрын
Came across your channel by the chance of the Google algorithm! Nice looking shop, I just had my 30x40 go up the other week in North Lakeland. Seemed to take forever! Do you have a link etc for the powder coating equipment people. I can't seem to find them on Google. I need a new spray booth for my shop and am feeling lazy! :)
@CertifiedRippers29 күн бұрын
Il link them as soon as I get home
@lyladaisieАй бұрын
We've got doors!
@Quixotic57Ай бұрын
Are the doors installed inside out? Shouldn’t the hinge pins be inside or am I missing something?
@CertifiedRippersАй бұрын
The doors are just hung to be outward swinging. We figured this would be best to conserve space.
@Quixotic57Ай бұрын
@@CertifiedRippers ah ok. Just be careful. Would be easy to break in by removing the pins.
@str8304Ай бұрын
I have something similiar I got from Home Depot with flooring. My only issue is my tool boxes with wheels cannot move on this. It was even harder to get the big tool boxes moved into place with this flooring down and starting to bunch up.
@CertifiedRippersАй бұрын
I think the brand I got allows stuff to Still roll on it while still giving some grip in case it gets wet
@workingmansrestorations7071Ай бұрын
I plan on trying to build my 40x60 as much as I can myself... alot of contractors are unpredictable and expensive
@KenMileyJrАй бұрын
Yeah, we lucked out with our concrete and building guy. Things came together pretty good.
@CertifiedRippersАй бұрын
That’s understandable. For us it was about speed and quality. This building is beautiful and it only took a month and a half from ground breaking to a sealed up structure. Most DIY projects like that can last sometimes years
@workingmansrestorations7071Ай бұрын
Good jam session. You little brother is good
@sash328Ай бұрын
A shovel needs to be pointy 🤪
@CertifiedRippersАй бұрын
Yeah, I just had the wrong shovel. I totally know what I’m doing😎
@gr8tfoxes617Ай бұрын
Very nice coverage and congrats on the father & son project. Amazing size shop! This will provide many for many opportunities years to come!
@davepelfrey3958Ай бұрын
Wow! That's a heck of an investment. Love the shop. Keep grinding.
@CertifiedRippersАй бұрын
Thanks for watching!
@cavy213Ай бұрын
Whats the building companys name? Any complaints or would you recommend?
@CertifiedRippersАй бұрын
I would definitely recommend. Backyard Buildings LLC
@chrisschulze8081Ай бұрын
Are you guys in the Pasco county area?
@CertifiedRippersАй бұрын
We are in the Saint Johns County area
@MelicoyАй бұрын
I hope that slab was cheap
@charlielim6799Ай бұрын
Should be without all the wire mesh. Not sure how it will hold with the lift.
@KenMileyJrАй бұрын
The slab was done by the book. 3000 psi concrete. It doesn't need rebar throughout, just the footings.
@KenMileyJrАй бұрын
@@charlielim6799 The lifts have extra deep footings below them. 8" nominal. The lift instructions call for at least 4" of 3000 psi concrete. We are good on that.
@dandookie1738Ай бұрын
Man this is awesome to see, happy for you and your dad! I've only ordered a few things so far, but this is definitely why I support and buy from you guys as much as possible for my Cobra!
@CertifiedRippersАй бұрын
Thanks!
@jbnnm657Ай бұрын
I'm planning on building a honey house for processing about this size. May I ask how much roughly a slab like that cost to pour? Great vid.
@CertifiedRippersАй бұрын
Thanks for watching, the slab with the apron was roughly around $32k for everything
@GhostRider-ii7tzАй бұрын
Congrats on the new shop brother.👍👊
@robloose3360Ай бұрын
Bad ass building big improvement over plywood and jack-stands you have to be excited
@CertifiedRippersАй бұрын
Oh yeah, I've definitely paid my dues
@ChuckG603Ай бұрын
I’m jealous you’re in a place with no frost! A slab is major excavation work in my area! Looks great tho stoked for what’s to come. Side bar your brother is a shredder! What brand steel building is that? I’ve been looking into a steel building for my garage/“shop”
@CertifiedRippersАй бұрын
it was custom from a local business called Backyard Buildings
@stephenalexander2427Ай бұрын
I’m a electrician by trade , bro if I was closer we would trade ! I need some work done on the cobra ! 😎 Congratulations y’all ! Y’all are killing it !
@CertifiedRippersАй бұрын
Hey now, there is still plenty to have done! what you need for your cobra?
@Adam_S281Ай бұрын
What an awesome watch. Congratulations to you and your dad on the awesome new space! Can’t wait for future updates
@reloaded1880Ай бұрын
Congrats on the shop bro!!
@CertifiedRippersАй бұрын
Thanks!
@TheModAddictАй бұрын
The pushrod sounds SOOOO Good
@CertifiedRippersАй бұрын
Only gonna get better stay tuned for the ole' 95
@TheModAddictАй бұрын
@@CertifiedRippershope its not a coyote😂
@TheModAddictАй бұрын
Fewer things I like more than a Self Made story. Yall deserve this! Im stoked for yall.
@MKBarousseАй бұрын
Congrats guys!
@tomkjr1Ай бұрын
Nice work! I really enjoyed the video and look forward to part 2.
@CheesusSVTАй бұрын
Legends are already made, Legacy begins. Looking amazing man! So happy for you guys. ❤🐍 Excited!
@motofarmmx2430Ай бұрын
Looks great and that's a dream shop for sure! The car looked amazing in there. I'm ready to move down to Florida and work for you.
@FootmanconcreteАй бұрын
We enjoyed working with you all on this project
@Json.-Ай бұрын
That’s alot of hard work and money involved, especially pouring that foundation I have done it, screeding concrete is back breaking work, and I use to work for Smyrna ready mix, the home location is where I live Helluva nice shop
@KenMileyJrАй бұрын
Going to be so nice not having to work on cars on the ground anymore!!
Пікірлер
03/04 Terminator Cobra and with a KB super charger. Dream. It's best mustang they ever made to this day SVT 💪💯
Do the roots style always make more than the centrifugal style superchargers? I have a 99 cobra and currently have a Vortech supercharger on it. Thinking about swapping that set up for a Whipple or a Kenny belle. I had a 2003 cobra when they were brand new but I didn’t swap the blower out. Just pullied it.
I'm curious as to what colors these are called.. Is your Mustang Torch Red or Laser Red? Also was the previous/old head lights smoked? Or were they just black housing?
@@andrei1971 They were slightly smoked, and the car is torch red. Thanks for watching!
Only rebar in the footings ? None in the main slab or at least mesh?
@@Grimmjaw187 the modern day technology in concrete is crazy. It’s got characteristics like fiber. They actually only needed to use rebar in the footings to pass code.
4.6 4v was nothing to play with then..... it for damn sure isn't to be played with now. It was gapping 5.7,6.0,6.2,7.0 same thing different names 🤣
Well that was a waste of time...
@@TopMach1 I’m sorry you feel that way. Ultimately this video was just having some fun with the donor vehicle for our new mach 1 project
@@CertifiedRippers what motor you putting in the Mach1?
@@TopMach1 the 351 Windsor out of this van
@@CertifiedRippers bro come on if you dont put a 4v in there its a Disgrace
@@TopMach1well we could have left the Mach shell sitting in the grassy field where we found it... At least we aren't putting an LS in it.
i think your bunch of morrons
Free car parts!?
Looks great, but no rebar outside on the concrete
Compressor should be closer to the main box. I found outthe hard way. Let the smoke out of the motor
00 pp000000000000000099000009
Hello what extension cord can I use what gauge ???
I’m not sure. I’d look up the manual on the welder.
wow those mustangs are proper sleeper builds
❤ great video sending regards from Australia ❤
nice .. i live down the street from you .. this looks great .. hope nothing but the best for you
Thanks!
Great video. Looking forward to part 2 of the shop build
Coming soon!
New sub here. Love the get it done attitude my man. Take in the memories you and your dad will make in this shop. Awesome. I'm along for the ride!
Thanks for watching and the kind words man! Hope you enjoy the future content as well
How tall is it to the eve....16 or 18ft and did you use Satin or Flat black on the ceiling? Thank You Looks great
16ft
Flat black on the ceiling
Great energy folks
Use MC connectors going into the panel, you don't want MC sheathing inside a panel like that.
We are gonna change it soon. I’m gonna run conduit up the wall
The MC connectors were twice the price of these basic clamps. The electrical inspections were already done so I used the basic clamps. The MC sheathing is pretty far away from any live contacts so it'll be fine.
Came across your channel by the chance of the Google algorithm! Nice looking shop, I just had my 30x40 go up the other week in North Lakeland. Seemed to take forever! Do you have a link etc for the powder coating equipment people. I can't seem to find them on Google. I need a new spray booth for my shop and am feeling lazy! :)
Il link them as soon as I get home
We've got doors!
Are the doors installed inside out? Shouldn’t the hinge pins be inside or am I missing something?
The doors are just hung to be outward swinging. We figured this would be best to conserve space.
@@CertifiedRippers ah ok. Just be careful. Would be easy to break in by removing the pins.
I have something similiar I got from Home Depot with flooring. My only issue is my tool boxes with wheels cannot move on this. It was even harder to get the big tool boxes moved into place with this flooring down and starting to bunch up.
I think the brand I got allows stuff to Still roll on it while still giving some grip in case it gets wet
I plan on trying to build my 40x60 as much as I can myself... alot of contractors are unpredictable and expensive
Yeah, we lucked out with our concrete and building guy. Things came together pretty good.
That’s understandable. For us it was about speed and quality. This building is beautiful and it only took a month and a half from ground breaking to a sealed up structure. Most DIY projects like that can last sometimes years
Good jam session. You little brother is good
A shovel needs to be pointy 🤪
Yeah, I just had the wrong shovel. I totally know what I’m doing😎
Very nice coverage and congrats on the father & son project. Amazing size shop! This will provide many for many opportunities years to come!
Wow! That's a heck of an investment. Love the shop. Keep grinding.
Thanks for watching!
Whats the building companys name? Any complaints or would you recommend?
I would definitely recommend. Backyard Buildings LLC
Are you guys in the Pasco county area?
We are in the Saint Johns County area
I hope that slab was cheap
Should be without all the wire mesh. Not sure how it will hold with the lift.
The slab was done by the book. 3000 psi concrete. It doesn't need rebar throughout, just the footings.
@@charlielim6799 The lifts have extra deep footings below them. 8" nominal. The lift instructions call for at least 4" of 3000 psi concrete. We are good on that.
Man this is awesome to see, happy for you and your dad! I've only ordered a few things so far, but this is definitely why I support and buy from you guys as much as possible for my Cobra!
Thanks!
I'm planning on building a honey house for processing about this size. May I ask how much roughly a slab like that cost to pour? Great vid.
Thanks for watching, the slab with the apron was roughly around $32k for everything
Congrats on the new shop brother.👍👊
Bad ass building big improvement over plywood and jack-stands you have to be excited
Oh yeah, I've definitely paid my dues
I’m jealous you’re in a place with no frost! A slab is major excavation work in my area! Looks great tho stoked for what’s to come. Side bar your brother is a shredder! What brand steel building is that? I’ve been looking into a steel building for my garage/“shop”
it was custom from a local business called Backyard Buildings
I’m a electrician by trade , bro if I was closer we would trade ! I need some work done on the cobra ! 😎 Congratulations y’all ! Y’all are killing it !
Hey now, there is still plenty to have done! what you need for your cobra?
What an awesome watch. Congratulations to you and your dad on the awesome new space! Can’t wait for future updates
Congrats on the shop bro!!
Thanks!
The pushrod sounds SOOOO Good
Only gonna get better stay tuned for the ole' 95
@@CertifiedRippershope its not a coyote😂
Fewer things I like more than a Self Made story. Yall deserve this! Im stoked for yall.
Congrats guys!
Nice work! I really enjoyed the video and look forward to part 2.
Legends are already made, Legacy begins. Looking amazing man! So happy for you guys. ❤🐍 Excited!
Looks great and that's a dream shop for sure! The car looked amazing in there. I'm ready to move down to Florida and work for you.
We enjoyed working with you all on this project
That’s alot of hard work and money involved, especially pouring that foundation I have done it, screeding concrete is back breaking work, and I use to work for Smyrna ready mix, the home location is where I live Helluva nice shop
Going to be so nice not having to work on cars on the ground anymore!!
Hell yeah!!