Today, we install a 2.3 Whipple on a CLEAN 10th anniversary Terminator. www.youtube.com/@CertifiedRip...
Жүктеу.....
Пікірлер: 44
@MustangLifestyleTV5 ай бұрын
ML Tuned 💪
@CertifiedRippers
5 ай бұрын
Yes sir!
@tomkjr1
5 ай бұрын
I wish I lived closer to you so I could have you dyno tune my new engine. It only has 30 miles on it!
@tomkjr15 ай бұрын
Both of my Terminators have/had the whipple 2.3 setup with around 18psi of boost and I have enjoyed them on the street immensely. At 600+whp, this setup is a blast to drive on the street without sacrificing normal drivability. I had a coupe and now a vert and I loved driving both Terminators equally. These cars are truly something special!
@CertifiedRippers
5 ай бұрын
I heavily agree
@KenMileyJr5 ай бұрын
I miss the simplicity of my old 2.3 Whipple cars. 600ish hp is the perfect hp for street shenanigans.
@jptxsvtfl5 ай бұрын
The tubulater has been exasperated 😆😂 indeed it has been
@Bpat6105 ай бұрын
That Whipple high life shirt is sweet
@NewEdgeDesigns5 ай бұрын
She Certified!!
@CertifiedRippers
5 ай бұрын
Absolutely
@josedelarosa64495 ай бұрын
Looks and sounds great 👍
@justin.c_svt5 ай бұрын
Very nice. Well done
@CertifiedRippers
5 ай бұрын
Thanks Justin!
@SVTgotti5 ай бұрын
same setup i have 606rwhp 💪🏻👍
@LeviEZ5 ай бұрын
Good job boys, making some good power
@CertifiedRippers
5 ай бұрын
Oh yeah, fun car now for sure!
@iadubber4 ай бұрын
The 2.3L is so perfect on these motors!
@Json.-5 ай бұрын
Great video, this car is a perfect example of how I’d want mine, perfect power level
@AwesomeFinish5 ай бұрын
Good stuff!
@ianzwezerijnen60435 ай бұрын
Mine rips. I'm running a 2.7upper w/stock lower. Full exhaust, 1050X, fore L2 fuel system, pnr stage 4 coolant trunk set up, fluidyne HE. Tuned on pump e85 and e85r. Made slightly over 700.
@3500camarz
5 ай бұрын
Nice. 700 is about the limit with a 2.3 baby whipple
@ianzwezerijnen6043
5 ай бұрын
@3500camarz yea that's about the limit. Getting an f150 rcsb for the next project.
@Jmuderer5 ай бұрын
🤣🤣. I seen the intro and was about to say!!! Lmaooo, Bro does not care to blow up these aviator engines lol. Atleast give it some 03/04 rods and pistons to give it a chance bro 🤣🤣🤣.
@cryptoguru9443 күн бұрын
Do the roots style always make more than the centrifugal style superchargers? I have a 99 cobra and currently have a Vortech supercharger on it. Thinking about swapping that set up for a Whipple or a Kenny belle. I had a 2003 cobra when they were brand new but I didn’t swap the blower out. Just pullied it.
@fast02gt5 ай бұрын
Buddy looks like Jeffery D.
@CertifiedRippers
5 ай бұрын
I got a haircut since then... Thanks for the support!
@badazz99
5 ай бұрын
😂
@Trollking1275 ай бұрын
Good video !!!!
@stephenalexander24275 ай бұрын
Great video !
@CertifiedRippers
5 ай бұрын
Thanks!
@natewolfe27374 ай бұрын
Where did you get the Powered by SVT radiator support cover? Was it custom made?
@CertifiedRippers
4 ай бұрын
Harpell autofab makes those
@Timrsnakess5 ай бұрын
Noice
@DriftDreams2425 ай бұрын
This is a bone stock Lincoln aviator motor? Running 20 psi of boost?
@CertifiedRippers
5 ай бұрын
No sir, this isn’t my car. This is actually an original terminator engine
@DriftDreams242
5 ай бұрын
@@CertifiedRippers oh nice man. I recently swapped a 05 Lincoln aviator motor into my Mustang on my channel and I freaken love it man. Great content btw keep it up man!
@midnight347
3 ай бұрын
A stock aviator motor prob wouldn't make it one pull on 20 psi lol
@TopMach15 ай бұрын
What would I need to whipple my mach 1
@CertifiedRippers
5 ай бұрын
I sum it up pretty good in the video. Injectors, better fuel pump OR Boost-a-pump system, Accufab or LFP throttle body ext.
@TopMach1
5 ай бұрын
@@CertifiedRippers will a 2.3 whipple come with a intercooler?
Пікірлер: 44
ML Tuned 💪
@CertifiedRippers
5 ай бұрын
Yes sir!
@tomkjr1
5 ай бұрын
I wish I lived closer to you so I could have you dyno tune my new engine. It only has 30 miles on it!
Both of my Terminators have/had the whipple 2.3 setup with around 18psi of boost and I have enjoyed them on the street immensely. At 600+whp, this setup is a blast to drive on the street without sacrificing normal drivability. I had a coupe and now a vert and I loved driving both Terminators equally. These cars are truly something special!
@CertifiedRippers
5 ай бұрын
I heavily agree
I miss the simplicity of my old 2.3 Whipple cars. 600ish hp is the perfect hp for street shenanigans.
The tubulater has been exasperated 😆😂 indeed it has been
That Whipple high life shirt is sweet
She Certified!!
@CertifiedRippers
5 ай бұрын
Absolutely
Looks and sounds great 👍
Very nice. Well done
@CertifiedRippers
5 ай бұрын
Thanks Justin!
same setup i have 606rwhp 💪🏻👍
Good job boys, making some good power
@CertifiedRippers
5 ай бұрын
Oh yeah, fun car now for sure!
The 2.3L is so perfect on these motors!
Great video, this car is a perfect example of how I’d want mine, perfect power level
Good stuff!
Mine rips. I'm running a 2.7upper w/stock lower. Full exhaust, 1050X, fore L2 fuel system, pnr stage 4 coolant trunk set up, fluidyne HE. Tuned on pump e85 and e85r. Made slightly over 700.
@3500camarz
5 ай бұрын
Nice. 700 is about the limit with a 2.3 baby whipple
@ianzwezerijnen6043
5 ай бұрын
@3500camarz yea that's about the limit. Getting an f150 rcsb for the next project.
🤣🤣. I seen the intro and was about to say!!! Lmaooo, Bro does not care to blow up these aviator engines lol. Atleast give it some 03/04 rods and pistons to give it a chance bro 🤣🤣🤣.
Do the roots style always make more than the centrifugal style superchargers? I have a 99 cobra and currently have a Vortech supercharger on it. Thinking about swapping that set up for a Whipple or a Kenny belle. I had a 2003 cobra when they were brand new but I didn’t swap the blower out. Just pullied it.
Buddy looks like Jeffery D.
@CertifiedRippers
5 ай бұрын
I got a haircut since then... Thanks for the support!
@badazz99
5 ай бұрын
😂
Good video !!!!
Great video !
@CertifiedRippers
5 ай бұрын
Thanks!
Where did you get the Powered by SVT radiator support cover? Was it custom made?
@CertifiedRippers
4 ай бұрын
Harpell autofab makes those
Noice
This is a bone stock Lincoln aviator motor? Running 20 psi of boost?
@CertifiedRippers
5 ай бұрын
No sir, this isn’t my car. This is actually an original terminator engine
@DriftDreams242
5 ай бұрын
@@CertifiedRippers oh nice man. I recently swapped a 05 Lincoln aviator motor into my Mustang on my channel and I freaken love it man. Great content btw keep it up man!
@midnight347
3 ай бұрын
A stock aviator motor prob wouldn't make it one pull on 20 psi lol
What would I need to whipple my mach 1
@CertifiedRippers
5 ай бұрын
I sum it up pretty good in the video. Injectors, better fuel pump OR Boost-a-pump system, Accufab or LFP throttle body ext.
@TopMach1
5 ай бұрын
@@CertifiedRippers will a 2.3 whipple come with a intercooler?
What wheels are those?
@CertifiedRippers
5 ай бұрын
Whistler SK1
What size pulley up top?
@CertifiedRippers
5 ай бұрын
3.0 upper, factory lower.