i wouldn't mind having a disc changer. i know you can burn MP3s
@rayregnogarage13 күн бұрын
I haven’t had a computer with a disc drive in almost 20 years
@richietdi16 күн бұрын
Just wanted to say Thank You... it is so nice not to hear the unnecessary alarm. So annoying.
@rayregnogarage13 күн бұрын
It’s great isn’t it? Just gotta remember to turn off your headlights. The warning is gone for that, too, now. lol
@GS4Tommy16 күн бұрын
Would you shut the Airbag Light off the same way with a Push Start? I only ask because I have a 2013 Lexus GS350 which is a Push Start. Also I installed my aftermarket steering wheel back in 2021 & I managed to bypass the Airbag Light but after storing the Car for a Very Long Winter & then after Winter having to replace the battery that is when the Air Bag Light came back on. Any reason why that may have happened?
@rayregnogarage7 күн бұрын
Not sure. Toyotas are different. I’ve done this on 4 of my cars and the process was different each time.
@samuelvalle754918 күн бұрын
i’ve been trying to find a 2 inch spring for my 2006 2 wheel drive ranger but i’ve only found ones for 98’s. does anyone know if they will fit a 2006
@rayregnogarage17 күн бұрын
If your 2wd indeed has springs, it should be the same. but some 2wds of that year were torsion bar. Also, if you change the springs you’ll need new upper arms, too. I’ve never seen it done without arms and i’ve also never seen 2” coils. Back in the early 2000s we all used 2.5” with aftermarket upper.
@tokokrazyloc421019 күн бұрын
You gonna do anymore videos on the 4runner I just bought me a stock 92 surf.
@rayregnogarage18 күн бұрын
I might. they just take so long to edit. haha
@gjanhanif824220 күн бұрын
This is the real teaching how to connected the adapter wheel....thank to you bruh...others youtuber just showing unnecessary action like skru up,how to open skru,how to lock skru,how to pull up steering wheel then just finish..just like that...
@prescottosegie21 күн бұрын
This truck look amazing I been watching your truck content for the last few weeks it been helpful for me keep up the good content Ray😎💪
@prescottosegie23 күн бұрын
i appreciate the infomation
@CotyBlair26 күн бұрын
I need to know the stud size mine broke and i keep ordering the wrong size im a girl help me
@rayregnogarage26 күн бұрын
i have no idea. but i just googled it. M12 1.25? i’d hit up Z1 motorsports and ask
@krisleksas123627 күн бұрын
Had to reattach mine after 19 years on the truck. These are no discontinued and impossible to find. Thanks for the how to!
@redneckoutlaw1278Ай бұрын
Plz make a video of the wiring harness plz bc I got the same headlights and I need help of the wiring harness
@chrislarson7044Ай бұрын
torque specs never heard of him lol
@FLYBOY-eh5thАй бұрын
Get some finger extenders for your turn signals.
@PinChE_LoCo2 күн бұрын
💅🏿
@cl0_dy714Ай бұрын
Is there anything you used to secure ur rear quarter panels from flopping in the wind lol
@rayregnogarage28 күн бұрын
Ya. You can use some electrical conduit. flatten and bend the ends to the right angle. I did that 20 years ago on another ranger that I flared the bedsides on. will get to it on this truck eventually
@YamommasblubberАй бұрын
I have a 98 and can’t figure out how to get those screws adjusted on the aftermarket lens I bought
@rudydaberry122Ай бұрын
What’s a good h13 led bulb?
@venkatmala8891Ай бұрын
Thank you for the detailed instructions! I have a 2008 Beetle and got the engine light on. I found that the cooling system error P-2181 comes up when checking. Do you have any DIY videos to fix this. Appreciate the help!!
@gregdodson5687Ай бұрын
Hi Ray, Greg writing back. My project truck (1997 STX) continues to improve. I bought some Aries 3" round side bar (running boards) and I couldn't get them to work. Have you considered adding some to your truck?
@rayregnogarageАй бұрын
No I dont like running boards. I have rock sliders on my xterra, but that’s very different
@pushythomАй бұрын
Great video very helpful thank you
@Spacejunk57Ай бұрын
How much do the leds go for?
@rayregnogarageАй бұрын
This is an old video. I’d look into Auxito. I use those on my other cars and they’re much brighter. I’ve been meaning to update my bulbs on this car, just haven’t gotten around to it
@richietdiАй бұрын
My ranger has abs disconnected and while driving the warning buzzer go's off. Will this stop that sound as well?
@rayregnogarageАй бұрын
What year is yours? I can’t remember if I got a buzzer, but I did pull the ABS fuse when i disconnected my ABS
@richietdiАй бұрын
1998. Do you remember which fuse number it was you pulled?
@rayregnogarageАй бұрын
i don’t remember. but i found it by googling
@richietdi16 күн бұрын
Yes it did.
@harold8096Ай бұрын
when i say i have the same truck i literally mean EXACT year, wheels, color, 5 speed everything lol im hear looking for inspiration
@tnathnigcoltd1401Ай бұрын
Please how can I get the spaindle
@harryd9782Ай бұрын
Did mine last week. With 14” wheels I didn’t jack it up or pull the wheels off at all just turned them out of the way. Did it in the driveway and had them both done in 20 minutes. I put on KYB shocks and didn’t have to beat anything on/off. The back shocks were even easier…all four took about an hour. Also have no idea what “aviation snips” are…I call them tin snips.
@YowzoeАй бұрын
Just this week picked up an ‘11 4.0 2wd to replace my ‘93, and all the chimes are driving me nucking futs. Do you think this would work on an ‘11? One thing I’ve heard the last few days is that Ford techs with access to the right computer and codes can turn off these chimes… have you heard of this?
@rayregnogarageАй бұрын
Ya i couldn’t tell you to be certain. I have had a 99, 08, and 95 ranger. the 08 was quite a bit more advanced on the inside than the 90s trucks. I would look into the obd2 computer update first
@FindmylimitАй бұрын
Damn thanks dude! Btw got the same ranger except two wheel drive
@k-mar9587Ай бұрын
Thanx man, you have helped a lot!
@1.8Troubles2 ай бұрын
This is gold, thanks
@50buttfish2 ай бұрын
The doors are all the same for XTerra/Pathfinder/Frontier; the only difference the Pathfinder driver side window motor has a 6-pin connector, vs the 2 pin connector; ensure you require the correct motor connector. Everything else is the same procedure.
@JonathanTorres-jd7fm2 ай бұрын
Dude your videos are so easy to understand, appreciate the help! Greetings from Victoria BC Canada!
@2H25212 ай бұрын
Miss your videos!
@rayregnogarage2 ай бұрын
i’ve got some more. i just haven’t edited. haha. been really busy.
@2H25212 ай бұрын
@@rayregnogarageNo worries, man. I’ll be looking forward to them. Hope you’re doing well!
@Giovanni-bz2xt2 ай бұрын
Try using 2 cinder blocks on each side with a level and a string while making sure that you have the blocks exactly in line with each other as well as have them about 2 inches from the tires. Use a tape measure to make sure that you have your tires the same distance from the string line. Make sure that you have your steering wheel straight as well as the tires. Some people like to put the front tires slightly more tow in however that chews the tires down. I literally just passed the knowledge that I received from a Vietnam veteran who was a close friend of mine that was actually more like family to me. Sadly he's passed away however the knowledge I received from him remains so that's basically a old-school alignment in a nutshell courtesy of a good man and great teacher. Yes it does take a bit of time to do this however it is effective to the point I have not needed to pay ridiculous amounts of money for a alignment since I was fortunately blessed with the knowledge. It actually gets easier each time as well as a bit quicker. I can get mine aligned in about 25-30 minutes if it gets bad enough to where I have to tow it to my house from the trails
@ryanorth864811 күн бұрын
Used this method on an 08 f350 I rebuilt the front end on, took it to the shop after for laser alignment. They didn't charge me and said I was only technically 1/32 of an inch off
@tnathnigcoltd14012 ай бұрын
Please I need your help with my Ford ranger like this you are doing I need the break disc , can you help get it for me
@ethanrogers39682 ай бұрын
Can I put on springs and a spacer kit?
@rayregnogarage2 ай бұрын
i wouldn’t recommend it
@scampalong2 ай бұрын
Helpful thanks!!
@matthewkelly4472 ай бұрын
What fucking size socket did you use pretty important to know
@jolti95352 ай бұрын
DAYMMMMMMMMMMMMMMMMMMM MY BOY BUILT
@fletchlivesdaily3482 ай бұрын
Are you still doing vids?
@rayregnogarage2 ай бұрын
Eh. I’ve shot a bunch. haven’t had time to edit. short answer is kinda. lol
@stephaniegillespie15882 ай бұрын
This was a great video and super easy to understand. Gonna try this out on my 1995 Ranger that won’t stop beeping with the airbag light!
@user-ct9dn8lq7y2 ай бұрын
y u move the sway bar
@user-ct9dn8lq7y2 ай бұрын
remove*
@rayregnogarage2 ай бұрын
because i off-road it
@allanmartinez08313 ай бұрын
What size of wheel and tire do you have on your Ranger?
@rayregnogarage2 ай бұрын
33x12.5, 15x8
@jwalkerXx3 ай бұрын
Good video yo thanks for sharing
@adreasbakas32963 ай бұрын
I think it needs 24h before you can use your car and 4-5 days to be completely ok and i am prety sure you did it completely wrong 🤣🤣
@rayregnogarage3 ай бұрын
Did you not read the thumbnail?
@INTHEFIELD7773 ай бұрын
I feel like oreilys or auto zone prolly has these to rent as well don’t they?
@rayregnogarage2 ай бұрын
Ya probably.
@carrillovlogs96893 ай бұрын
Lots of talk, little view of the video of the Ford Ranger friend
@mpanka13 ай бұрын
Turns out, if you go ahead and decide to replace ALL your dash lights with new, brighter and longer lasting LED’s, that STUPID door chime will also start making loads of racket that makes you want to jump outta the window every time!! 😩
@rayregnogarage3 ай бұрын
ha yes because the non LEDs have less resistance so the truck thinks they are not there.
@robnopos3 ай бұрын
Great video! I saved $170 on my Impreza in Brooklyn and it was as quick as advertised! Thank you!
Пікірлер
Thanks Ray, I can replace my rear shocks on my Ford Ranger now! Next step: buy a Ford Ranger.
hahhaahha
Holy fuck mine won’t stop beeping when I’m driving it’s insane
Thank you!!
i wouldn't mind having a disc changer. i know you can burn MP3s
I haven’t had a computer with a disc drive in almost 20 years
Just wanted to say Thank You... it is so nice not to hear the unnecessary alarm. So annoying.
It’s great isn’t it? Just gotta remember to turn off your headlights. The warning is gone for that, too, now. lol
Would you shut the Airbag Light off the same way with a Push Start? I only ask because I have a 2013 Lexus GS350 which is a Push Start. Also I installed my aftermarket steering wheel back in 2021 & I managed to bypass the Airbag Light but after storing the Car for a Very Long Winter & then after Winter having to replace the battery that is when the Air Bag Light came back on. Any reason why that may have happened?
Not sure. Toyotas are different. I’ve done this on 4 of my cars and the process was different each time.
i’ve been trying to find a 2 inch spring for my 2006 2 wheel drive ranger but i’ve only found ones for 98’s. does anyone know if they will fit a 2006
If your 2wd indeed has springs, it should be the same. but some 2wds of that year were torsion bar. Also, if you change the springs you’ll need new upper arms, too. I’ve never seen it done without arms and i’ve also never seen 2” coils. Back in the early 2000s we all used 2.5” with aftermarket upper.
You gonna do anymore videos on the 4runner I just bought me a stock 92 surf.
I might. they just take so long to edit. haha
This is the real teaching how to connected the adapter wheel....thank to you bruh...others youtuber just showing unnecessary action like skru up,how to open skru,how to lock skru,how to pull up steering wheel then just finish..just like that...
This truck look amazing I been watching your truck content for the last few weeks it been helpful for me keep up the good content Ray😎💪
i appreciate the infomation
I need to know the stud size mine broke and i keep ordering the wrong size im a girl help me
i have no idea. but i just googled it. M12 1.25? i’d hit up Z1 motorsports and ask
Had to reattach mine after 19 years on the truck. These are no discontinued and impossible to find. Thanks for the how to!
Plz make a video of the wiring harness plz bc I got the same headlights and I need help of the wiring harness
torque specs never heard of him lol
Get some finger extenders for your turn signals.
💅🏿
Is there anything you used to secure ur rear quarter panels from flopping in the wind lol
Ya. You can use some electrical conduit. flatten and bend the ends to the right angle. I did that 20 years ago on another ranger that I flared the bedsides on. will get to it on this truck eventually
I have a 98 and can’t figure out how to get those screws adjusted on the aftermarket lens I bought
What’s a good h13 led bulb?
Thank you for the detailed instructions! I have a 2008 Beetle and got the engine light on. I found that the cooling system error P-2181 comes up when checking. Do you have any DIY videos to fix this. Appreciate the help!!
Hi Ray, Greg writing back. My project truck (1997 STX) continues to improve. I bought some Aries 3" round side bar (running boards) and I couldn't get them to work. Have you considered adding some to your truck?
No I dont like running boards. I have rock sliders on my xterra, but that’s very different
Great video very helpful thank you
How much do the leds go for?
This is an old video. I’d look into Auxito. I use those on my other cars and they’re much brighter. I’ve been meaning to update my bulbs on this car, just haven’t gotten around to it
My ranger has abs disconnected and while driving the warning buzzer go's off. Will this stop that sound as well?
What year is yours? I can’t remember if I got a buzzer, but I did pull the ABS fuse when i disconnected my ABS
1998. Do you remember which fuse number it was you pulled?
i don’t remember. but i found it by googling
Yes it did.
when i say i have the same truck i literally mean EXACT year, wheels, color, 5 speed everything lol im hear looking for inspiration
Please how can I get the spaindle
Did mine last week. With 14” wheels I didn’t jack it up or pull the wheels off at all just turned them out of the way. Did it in the driveway and had them both done in 20 minutes. I put on KYB shocks and didn’t have to beat anything on/off. The back shocks were even easier…all four took about an hour. Also have no idea what “aviation snips” are…I call them tin snips.
Just this week picked up an ‘11 4.0 2wd to replace my ‘93, and all the chimes are driving me nucking futs. Do you think this would work on an ‘11? One thing I’ve heard the last few days is that Ford techs with access to the right computer and codes can turn off these chimes… have you heard of this?
Ya i couldn’t tell you to be certain. I have had a 99, 08, and 95 ranger. the 08 was quite a bit more advanced on the inside than the 90s trucks. I would look into the obd2 computer update first
Damn thanks dude! Btw got the same ranger except two wheel drive
Thanx man, you have helped a lot!
This is gold, thanks
The doors are all the same for XTerra/Pathfinder/Frontier; the only difference the Pathfinder driver side window motor has a 6-pin connector, vs the 2 pin connector; ensure you require the correct motor connector. Everything else is the same procedure.
Dude your videos are so easy to understand, appreciate the help! Greetings from Victoria BC Canada!
Miss your videos!
i’ve got some more. i just haven’t edited. haha. been really busy.
@@rayregnogarageNo worries, man. I’ll be looking forward to them. Hope you’re doing well!
Try using 2 cinder blocks on each side with a level and a string while making sure that you have the blocks exactly in line with each other as well as have them about 2 inches from the tires. Use a tape measure to make sure that you have your tires the same distance from the string line. Make sure that you have your steering wheel straight as well as the tires. Some people like to put the front tires slightly more tow in however that chews the tires down. I literally just passed the knowledge that I received from a Vietnam veteran who was a close friend of mine that was actually more like family to me. Sadly he's passed away however the knowledge I received from him remains so that's basically a old-school alignment in a nutshell courtesy of a good man and great teacher. Yes it does take a bit of time to do this however it is effective to the point I have not needed to pay ridiculous amounts of money for a alignment since I was fortunately blessed with the knowledge. It actually gets easier each time as well as a bit quicker. I can get mine aligned in about 25-30 minutes if it gets bad enough to where I have to tow it to my house from the trails
Used this method on an 08 f350 I rebuilt the front end on, took it to the shop after for laser alignment. They didn't charge me and said I was only technically 1/32 of an inch off
Please I need your help with my Ford ranger like this you are doing I need the break disc , can you help get it for me
Can I put on springs and a spacer kit?
i wouldn’t recommend it
Helpful thanks!!
What fucking size socket did you use pretty important to know
DAYMMMMMMMMMMMMMMMMMMM MY BOY BUILT
Are you still doing vids?
Eh. I’ve shot a bunch. haven’t had time to edit. short answer is kinda. lol
This was a great video and super easy to understand. Gonna try this out on my 1995 Ranger that won’t stop beeping with the airbag light!
y u move the sway bar
remove*
because i off-road it
What size of wheel and tire do you have on your Ranger?
33x12.5, 15x8
Good video yo thanks for sharing
I think it needs 24h before you can use your car and 4-5 days to be completely ok and i am prety sure you did it completely wrong 🤣🤣
Did you not read the thumbnail?
I feel like oreilys or auto zone prolly has these to rent as well don’t they?
Ya probably.
Lots of talk, little view of the video of the Ford Ranger friend
Turns out, if you go ahead and decide to replace ALL your dash lights with new, brighter and longer lasting LED’s, that STUPID door chime will also start making loads of racket that makes you want to jump outta the window every time!! 😩
ha yes because the non LEDs have less resistance so the truck thinks they are not there.
Great video! I saved $170 on my Impreza in Brooklyn and it was as quick as advertised! Thank you!
Glad it helped!