Great to know! Does he ECU compensate properly or does it need to be upgraded?
@przemysaw12411 сағат бұрын
Hello I have a brand new Suzuki DF15 AL, what procedures do you recommend to get it in properly because everyone says something different??? Can you advise me how to reach it properly? Hello I mean how to swim for the first 20 hours?
@thesaltyhooker77875 күн бұрын
Does that prop spacer come already on the oem 9" pitch prop ? Looking to do the same thing when I switch mine to the 20hp. Thanks
@leww19825 күн бұрын
is there a way to clear historycal codes?
@tomme39137 күн бұрын
that transom sucks
@radekgajak32477 күн бұрын
When I can upgrade to 20 hp..before brake in or after so I don't ruined the engine
@nanukbigwithe13 күн бұрын
Suzuki 9.9hp to 20hp conversion - DF9.9B to DF20A
@tlgrimmy14 күн бұрын
Can I ask what trailer you're using? Looks like an ideal size for a Kaboat:)
@poopandshowa15 күн бұрын
Hey, I am an avid fly fisherman and love the kaboat. How do you think it would fair standing up and fly fishing without a lean bar on semi choppy water. I have heard mixed reviews on the stability and floor space for standing.
@andrewfalik250415 күн бұрын
Could you explain what is the function of the VST on my 20hp Suzuki outboard.
@laingej15 күн бұрын
Collect and discharge vapors given off from the fuel.
@ndskryle247415 күн бұрын
where can I buy a chip for my mercury 15 and turn it into a 20
@laingej15 күн бұрын
Not familiar with mercury not sure if you can do that.. i know tohatsu you can
@Viittis16 күн бұрын
Glad to see you and your motor are well. I've been servicing my motor according to your videos and upgraded it from 15hp to 20hp. All the best to you, hope to see some fishing clips as well 👍
@srileo16 күн бұрын
Well, well, good to see you back. I upgraded my motor to 20hp (chip swap) and its perfect.
@user-rm1pi2hh8c16 күн бұрын
Зачот👍
@danrush840916 күн бұрын
Good to see you back, how has the motor been treating you.?
@laingej16 күн бұрын
The motor is been perfect 👌🏻 thanks
@stiannikkinenrrstad33016 күн бұрын
Hi! Can you please tell us how big the difference is when using the 9.9 ECU VS the 20hp ECU? Is It only the rmp that is higher, or do you feel the extra power all the Way?
@jakovliovas17 күн бұрын
hello does ir read serial number of engine?
@bradnewman1317 күн бұрын
is that not a 12v staarting battery? how is it reading 13.8?
@mazdarx788717 күн бұрын
The reason for buying the same motor but with a lower HP rating , then upgrading to higher power with easy simple component changes like this vid is labeling. Nobody, without taking the motor apart would know it's a 20 instead of a 9.9. Now he has a 20 on his boat rated for 9.9 and pays cheaper insurance
@GavinThomas-xg5ux18 күн бұрын
Does this work with the 15hp?
@paulthompson121619 күн бұрын
Barefoot? You’re one tough hombre. I have a 20hp Tohatsu on a14 foot Bris with an aluminum floor and I only get about 21mph at max rpm. I guess on the bright side I didn’t lose my fish finder. Nice video.
@TomONeilNZ21 күн бұрын
Great video. what year is your motor please?
@Mascotal23 күн бұрын
I would stop using the stabilizer, and just use good quality fuel to run it. Then in the fall drain the gas and run it with engineered fuel before storage.
@newt66c3326 күн бұрын
you can make that a 20hp with a few parts
@crucial100927 күн бұрын
Thanks for sharing this is very helpful!
@AAE-cg1il27 күн бұрын
18 mph is fast enough for that type of boat. With that 11 inch pitch, you are luggingbghe motor and it will have a short life. You should probably stay with the 9 pitch.
@OldMysticFantasist28 күн бұрын
Very clever design & construction!
@mikeotte160929 күн бұрын
Hello there Mike from Canada... you seem very knowledgeable regarding these Suzuki's, I was wondering if I could pick your brain.. I have a 2021 Suzuki DF 20... my problem... when idling it spits water just fine, as I accelerate there is a spot about 1/3 throttle where it stops spitting water... if I hold it there the red light comes on and it shuts down... if I don't hold it there and continue giving it throttle it will start shooting water again... I've had it to a mechanic, he took it apart and said the impeller was in perfect shape, and all the lines are clear including the water intake. In speaking with someone else they said it could be cavitating at that RPM and or boat speed.... any thoughts? Your help would be greatly appreciated... so the boat it is on is a old Naden, 16 foot camp boat...
@laingej16 күн бұрын
Yeah test it in a bucket well submerged and see if it does the same thing.. could very well be that is sucking air at that boat speed and might have to change prop pitch if you cant lower the motor more
@mikeotte160915 күн бұрын
@@laingej Hey thanks for the advice, it only does it in gear when moving so I don't think the bucket test will work, but perhaps the prop pitch may be an option... again thanks...
@edwinlaing983415 күн бұрын
@@mikeotte1609in a large enough trash can full of water you can test it in gear
@mazdamaniac4643Ай бұрын
That is not a restrictor. It's an air-swirl plate, intended to improve fuel atomisation by generating stable air flow around the throat of the throttle body, assisting the spray pattern the injector produces. All you have done is disturb this airflow, resulting in instabilties in that airflow around the injector at load/rpm ranges, unless you have altered the fuel mapping to compensate. The moral of this story is: don't mess with things that the manufacturer has engineers spending time to develop unless you know *exactly* what it is for, how it works and why.
@philwhite110013 күн бұрын
its LITERALLY called a restrictor plate on suzukis site and diagrams . YES , it MAY help with swirl but the 9/15/20 hp egg beaters ALL have the SAME injectors , intake , throttle body . Only difference is the 9 has a tight plate , the 15 is a bit bigger and the 20 has a full bore screen w/no restrictions . and yes , they DO have different ecms , elc/man for the 9 , elec / man 15 , elec / man 20 The 3 even have the same two camshaft options , elec/man So , technically , the only difference from 9 to 20 is glorious washer and a ecm tune Does tossing the plate make it a full 5 hp up ? Highly doubt it w/o the ecm to match BUT , Im sure it gives a few % points . As far as A/F ratio .... a redneck way of using the OG ecm and bumping up fueling would be to remove the IAT sensor , measure your ohms at normal ambient temp , find a resistor to trick the ecm into thinking its , say 30*f outside . BUT , it does have a MAP sensor , youd have to hook up SDS but im willing to bet the ecm is more than capable of using the new MAP readings/values to correct the A/F after removing the R-plate . If thats the case then the only diff in ecm is timing and im too lazy to pull out SDS or the book and see what total timing is on all 3 . If timing is THE ONLY diff in the ecms then a work around would be to SLIGHTLY enlogate the pickup sensor mounting holes and advance the sensor its self OR search for days for a offset flywheel keyway , IF its keyed and not splined .
@solarfunction1847Ай бұрын
The latest DF9.9AL comes with a 7"-11"P Propeller & the latest DF20AL comes with a 7"-12'P Propeller. If you want to improve you could go to a Suzuki Propeller - 8-20HP, Dia 9 1/4", Pitch 11" or Suzuki Propeller - 8-20HP, Dia 9 1/4", Pitch 12".
@michaelchiciak9512Ай бұрын
Hey man love your channel. I had a good up today where lubricating the swivel bracket, the stupid grease gun got stuck on the zerk and I cracked the aluminum housing trying to get it off. I saw the brackets are only like 80 bucks, but replacing it looks like the entire motor head has to come off or the lower unit has to come off. Ever do anything like this?
@jettamaster3297Ай бұрын
interesting video! It would probably be way cheaper to have the stock 9.9 ecu flashed with the 20HP map file than buying the new $400 ecu...
@johnfarling1537Ай бұрын
Do you put this video on when you’re heading out to go dancing at the club?
@IjanHaisahАй бұрын
Hye Sir tq for good vedio,cant i ask ball adjust for 15hp Yamaha same or nott??
@garywelker8398Ай бұрын
CAN'T BACK UP A TRAILER ? lol
@timbeach2409Ай бұрын
I just read someone converted to 20hp and didn't change the ecu. Said it retrains itself.
@ralph9987Ай бұрын
My AB glass vbotton and a yamaha 15hp 2 stroke does 39mph.
@andrzejfiertek2089Ай бұрын
The exhaust valves had to be left at 0.009in and the intake valves at 8 or 7. It is not that important what the manufacturer states, the exhaust valves are always set looser because they heat up much more, so it will be smaller during operation...
@ThatOneGuyWithTheEyeАй бұрын
Glad to know i wont be wasting my time with that conversion, ill convert a 15hp to 25 any day. But this is just a waste of time, just buy a bigger motor to start with.
@ThatOneGuyWithTheEyeАй бұрын
All that for only 22mph? My 12ft jon boat with an 18hp evinrude gets up to 25mph and i haven't even changed the prop or got the trim dialed in yet
@ia6980Ай бұрын
What about 9.8 efi tohatsu? Is it same?
@markwybierala4936Ай бұрын
This is really cool. I can’t help but believe that a design that is capable of 20hp but set up to only provide 9.9 ought to last a long time. I’m gonna get one.
@stevea6722Ай бұрын
ECM has a Mitsubishi insignia molded into the case
@buzzz241Ай бұрын
Why not remove all restrictor plates?
@cabben8830Ай бұрын
Why did you adjust them?
@rosagalha8079Ай бұрын
Melho que já conheci
@kevinhannessen6559Ай бұрын
Wauw, my Outboard motor has just the same problem as the motor was running in the beginning. Thanks for the video!!
@kenh67222 ай бұрын
I changed the oil and I have found a copper washer in the bottom of the waste oil, and does not appear to be leaking, I am going to change it again in two or three days after a hundred miles, I am assuming since it's not leaking that it will be okay for 2 or 3 days, thoughts?
Пікірлер
Great to know! Does he ECU compensate properly or does it need to be upgraded?
Hello I have a brand new Suzuki DF15 AL, what procedures do you recommend to get it in properly because everyone says something different??? Can you advise me how to reach it properly? Hello I mean how to swim for the first 20 hours?
Does that prop spacer come already on the oem 9" pitch prop ? Looking to do the same thing when I switch mine to the 20hp. Thanks
is there a way to clear historycal codes?
that transom sucks
When I can upgrade to 20 hp..before brake in or after so I don't ruined the engine
Suzuki 9.9hp to 20hp conversion - DF9.9B to DF20A
Can I ask what trailer you're using? Looks like an ideal size for a Kaboat:)
Hey, I am an avid fly fisherman and love the kaboat. How do you think it would fair standing up and fly fishing without a lean bar on semi choppy water. I have heard mixed reviews on the stability and floor space for standing.
Could you explain what is the function of the VST on my 20hp Suzuki outboard.
Collect and discharge vapors given off from the fuel.
where can I buy a chip for my mercury 15 and turn it into a 20
Not familiar with mercury not sure if you can do that.. i know tohatsu you can
Glad to see you and your motor are well. I've been servicing my motor according to your videos and upgraded it from 15hp to 20hp. All the best to you, hope to see some fishing clips as well 👍
Well, well, good to see you back. I upgraded my motor to 20hp (chip swap) and its perfect.
Зачот👍
Good to see you back, how has the motor been treating you.?
The motor is been perfect 👌🏻 thanks
Hi! Can you please tell us how big the difference is when using the 9.9 ECU VS the 20hp ECU? Is It only the rmp that is higher, or do you feel the extra power all the Way?
hello does ir read serial number of engine?
is that not a 12v staarting battery? how is it reading 13.8?
The reason for buying the same motor but with a lower HP rating , then upgrading to higher power with easy simple component changes like this vid is labeling. Nobody, without taking the motor apart would know it's a 20 instead of a 9.9. Now he has a 20 on his boat rated for 9.9 and pays cheaper insurance
Does this work with the 15hp?
Barefoot? You’re one tough hombre. I have a 20hp Tohatsu on a14 foot Bris with an aluminum floor and I only get about 21mph at max rpm. I guess on the bright side I didn’t lose my fish finder. Nice video.
Great video. what year is your motor please?
I would stop using the stabilizer, and just use good quality fuel to run it. Then in the fall drain the gas and run it with engineered fuel before storage.
you can make that a 20hp with a few parts
Thanks for sharing this is very helpful!
18 mph is fast enough for that type of boat. With that 11 inch pitch, you are luggingbghe motor and it will have a short life. You should probably stay with the 9 pitch.
Very clever design & construction!
Hello there Mike from Canada... you seem very knowledgeable regarding these Suzuki's, I was wondering if I could pick your brain.. I have a 2021 Suzuki DF 20... my problem... when idling it spits water just fine, as I accelerate there is a spot about 1/3 throttle where it stops spitting water... if I hold it there the red light comes on and it shuts down... if I don't hold it there and continue giving it throttle it will start shooting water again... I've had it to a mechanic, he took it apart and said the impeller was in perfect shape, and all the lines are clear including the water intake. In speaking with someone else they said it could be cavitating at that RPM and or boat speed.... any thoughts? Your help would be greatly appreciated... so the boat it is on is a old Naden, 16 foot camp boat...
Yeah test it in a bucket well submerged and see if it does the same thing.. could very well be that is sucking air at that boat speed and might have to change prop pitch if you cant lower the motor more
@@laingej Hey thanks for the advice, it only does it in gear when moving so I don't think the bucket test will work, but perhaps the prop pitch may be an option... again thanks...
@@mikeotte1609in a large enough trash can full of water you can test it in gear
That is not a restrictor. It's an air-swirl plate, intended to improve fuel atomisation by generating stable air flow around the throat of the throttle body, assisting the spray pattern the injector produces. All you have done is disturb this airflow, resulting in instabilties in that airflow around the injector at load/rpm ranges, unless you have altered the fuel mapping to compensate. The moral of this story is: don't mess with things that the manufacturer has engineers spending time to develop unless you know *exactly* what it is for, how it works and why.
its LITERALLY called a restrictor plate on suzukis site and diagrams . YES , it MAY help with swirl but the 9/15/20 hp egg beaters ALL have the SAME injectors , intake , throttle body . Only difference is the 9 has a tight plate , the 15 is a bit bigger and the 20 has a full bore screen w/no restrictions . and yes , they DO have different ecms , elc/man for the 9 , elec / man 15 , elec / man 20 The 3 even have the same two camshaft options , elec/man So , technically , the only difference from 9 to 20 is glorious washer and a ecm tune Does tossing the plate make it a full 5 hp up ? Highly doubt it w/o the ecm to match BUT , Im sure it gives a few % points . As far as A/F ratio .... a redneck way of using the OG ecm and bumping up fueling would be to remove the IAT sensor , measure your ohms at normal ambient temp , find a resistor to trick the ecm into thinking its , say 30*f outside . BUT , it does have a MAP sensor , youd have to hook up SDS but im willing to bet the ecm is more than capable of using the new MAP readings/values to correct the A/F after removing the R-plate . If thats the case then the only diff in ecm is timing and im too lazy to pull out SDS or the book and see what total timing is on all 3 . If timing is THE ONLY diff in the ecms then a work around would be to SLIGHTLY enlogate the pickup sensor mounting holes and advance the sensor its self OR search for days for a offset flywheel keyway , IF its keyed and not splined .
The latest DF9.9AL comes with a 7"-11"P Propeller & the latest DF20AL comes with a 7"-12'P Propeller. If you want to improve you could go to a Suzuki Propeller - 8-20HP, Dia 9 1/4", Pitch 11" or Suzuki Propeller - 8-20HP, Dia 9 1/4", Pitch 12".
Hey man love your channel. I had a good up today where lubricating the swivel bracket, the stupid grease gun got stuck on the zerk and I cracked the aluminum housing trying to get it off. I saw the brackets are only like 80 bucks, but replacing it looks like the entire motor head has to come off or the lower unit has to come off. Ever do anything like this?
interesting video! It would probably be way cheaper to have the stock 9.9 ecu flashed with the 20HP map file than buying the new $400 ecu...
Do you put this video on when you’re heading out to go dancing at the club?
Hye Sir tq for good vedio,cant i ask ball adjust for 15hp Yamaha same or nott??
CAN'T BACK UP A TRAILER ? lol
I just read someone converted to 20hp and didn't change the ecu. Said it retrains itself.
My AB glass vbotton and a yamaha 15hp 2 stroke does 39mph.
The exhaust valves had to be left at 0.009in and the intake valves at 8 or 7. It is not that important what the manufacturer states, the exhaust valves are always set looser because they heat up much more, so it will be smaller during operation...
Glad to know i wont be wasting my time with that conversion, ill convert a 15hp to 25 any day. But this is just a waste of time, just buy a bigger motor to start with.
All that for only 22mph? My 12ft jon boat with an 18hp evinrude gets up to 25mph and i haven't even changed the prop or got the trim dialed in yet
What about 9.8 efi tohatsu? Is it same?
This is really cool. I can’t help but believe that a design that is capable of 20hp but set up to only provide 9.9 ought to last a long time. I’m gonna get one.
ECM has a Mitsubishi insignia molded into the case
Why not remove all restrictor plates?
Why did you adjust them?
Melho que já conheci
Wauw, my Outboard motor has just the same problem as the motor was running in the beginning. Thanks for the video!!
I changed the oil and I have found a copper washer in the bottom of the waste oil, and does not appear to be leaking, I am going to change it again in two or three days after a hundred miles, I am assuming since it's not leaking that it will be okay for 2 or 3 days, thoughts?
How many cc has the 9.9? 😂😂😂😂
where did you get the software?