Really not a good idea to boost with a new vehicle 😢 Just to let you know
@jrztoolzmore99913 күн бұрын
Thanks for the info,,, but I have been jumping my riding mower like that for over a year, my truck is old, but far from new LOL. the battery in the riding mower is completely dead, that's why I jump it.😀
@LikeLillie4097 күн бұрын
Great video, I have the same oven but my oven door won’t completely open. Any suggestions how what would be causing the door to be stuck.
@user-yn1ke3wr4k10 күн бұрын
“Which” cleaner. Not “Witch” cleaner.
@jrztoolzmore999110 күн бұрын
Sorry I spelled witch wrong, thank you 👍
@theJapanesegingerninja-fh1kz10 күн бұрын
But it says whitch.
@KathyBGood7 күн бұрын
Lol gracious answer to the critic, and on purpose or not, repeating the wrong spelling is hilarious! Thanks for the video! @@jrztoolzmore9991
@jrztoolzmore99917 күн бұрын
Ywc 👍
@philliphall519811 күн бұрын
Less talk and more work ???
@jrztoolzmore999111 күн бұрын
I keep telling myself that, more video just less clips for me to edit! Thank you for letting me know and thanks for being kind about letting me know 👍😀
@philliphall51983 күн бұрын
@@jrztoolzmore9991I’m not trying to hurt your feelings, just hoping more people will watch your videos and learn from You 😊
@philliphall519811 күн бұрын
Good to deburr it before you get hurt or someone else 😊
@jrztoolzmore999111 күн бұрын
I can still do it thank you 👍
@fern618119 күн бұрын
Good stuff. Plain and simple! Shit, finally
@MimickingMimic22 күн бұрын
Just get to repairing the headlight Jesus
@jrztoolzmore999122 күн бұрын
It took a long time but it all worked out good 👍
@MimickingMimic22 күн бұрын
@@jrztoolzmore9991 did not help one bit tbh. I've got everything working... Minus the headlight. Granted everything is custom on it. All replacement. I have a bullet style headlight from a motorcycle. So it's white black and blue. The harness is green blue and white.. green is ground and hooked into black the blues are connected the whites are connected.. still no headlight
@jrztoolzmore999122 күн бұрын
I know on my wire colors are white,blue,green, on Heading harness,,, I know if you put a different Heading on a gy6 scooter the wire colors might not match up,,, I hade a long a bullet headlight and it did not work. Gy6 scooters are very finicky, do you have the original headlight ? If so you might hafto put it back on.
@MimickingMimic22 күн бұрын
@@jrztoolzmore9991 I have part of the original headlight harness. I bought this bike 2 years ago and it was trashed. I've got everything working minus the headlight. Lol so here I am trying to find a solution on yt for the ONE thing and nothing is available
@dhoffman229027 күн бұрын
Hello, thank you for the video! I have a GE side by side that was delivered a few months ago. The doors, like yours here, are not flush at top, about 1/8-1/4 inch off. I’m not worried about that so much, but the mechanism that controls the force of the last couple inches of closing is loud and creaky. It’s like a finger that sticks out and meets the door and retracts inside under the weight of the closing door. Also, my fridge does have the same adjustment nut you show here. So maybe they have the same mechanism. All I want to do is get the noise to stop. Wondering if I would want to put wd40 into the finger mechanism, where it sticks out from??? Both sides are rather creaky upon opening and closing… just the couple inches nearest the fridge.
@jrztoolzmore999127 күн бұрын
Hi To whome it may concern, yes you can use wd-40 on both ends of the fridge door, when you open the door the part that sticks out on top of door put a little wd-40 on both ends, and close and reopen the door a few times and the noise should go away, if not ,,,repeat the process again and than you should be good. I hope this helps you out. 👍😀
@xFOXx28 күн бұрын
Thanks 4 the help 😎👍
@jrztoolzmore999128 күн бұрын
Your welcome 👍😀
@scotthildebrand1904Ай бұрын
Where do I get that red head? for my Murry M2500?
@jrztoolzmore9991Ай бұрын
I'm not sure, the one in my video I found in someone's garbage,,, you can try amazon, ebay, if I didn't find that red head for my murray, I definitely would try amazon or ebay. I hope this helps 😀
@deniece.anastassiaАй бұрын
Please do not stop making videos. This was extremely helpful! So many people post “how-to”videos that basically copy previously posted almost identical “how-to” videos step by step-the same instructions over and over. There was a need for what you posted here with cleaning under the glass stove-top! I really do hope you continue to make videos like this one that dive into the more complicated aspects of “how-to” - this was a tremendous help and I was able to finally clean under my glass stove top after twelve years!!!
@jrztoolzmore9991Ай бұрын
I am so 😀 that my video helped you out, thank you so much for the comment it means the world to me 😀 thank you again.
@user-dv4id9qo8pАй бұрын
Just got the man version 20 bucks yard sale
@jrztoolzmore9991Ай бұрын
Oh wow 👍
@waitandhopeАй бұрын
Still can't figure it out lol
@jrztoolzmore9991Ай бұрын
I'm glad the video helped 👍😀
@Rocketcity007Ай бұрын
Thank you!
@jrztoolzmore9991Ай бұрын
Your welcome 😀
@laurenh3076Ай бұрын
My husband is the CRO of a company and just sold his last company to one of the top companies in THE WORLD and couldn’t figure out how to put the door back on. God bless you, you saved my marriage.
@jrztoolzmore9991Ай бұрын
I'm very happy for you both and glad the video helped you out 😀👍
@bennyrogergundersen3040Ай бұрын
Also many new scooters is delivered with too low idle resulting in the engine stops sometimes at a red light in traffic....
@jrztoolzmore9991Ай бұрын
That is true,,, my friend bought a new gy6 50cc scooter, his carburetor had 102 main jet 85 pilot jet,, way to big, he lives in florida, so I put a 79 main jet and 32 pilot jet and some tweaking and know he Is all set.
@kristieandjeff2720Ай бұрын
Excellent video, thank you for sharing 👍
@jrztoolzmore9991Ай бұрын
Thank you, your welcome 😀👍
@treenbean72552 ай бұрын
What if the wires are cut on your scooter how do you connect them when you have 4 wires and there are 5 on the new ignition switch?
@jrztoolzmore99912 ай бұрын
It depends on the ignition switch, if you only need 4 wires and the 5th wire you don't need just cap it off.
@unkelruckuss2 ай бұрын
Thanks. You made it easy, 👍
@jrztoolzmore99912 ай бұрын
Your welcome, I'm glad the video helped 😀👍
@philliphall51982 ай бұрын
Cutting the pulley is nuts, just put the belt on rear and then the three small pulleys
@clashingwithtrey7822 ай бұрын
I’ve been watching your videos since near the beginning and you are definitely by far the best at what you do!! Keep it up JRZ Toolz your going to be huge one day! Keep making my weekly watch worth it!!!
@jrztoolzmore99912 ай бұрын
Hi clashingwithtrey, thank you so much for your comment it means alot to me. Thank you so much. 😀👍
@peterchang76462 ай бұрын
Thx. did not know you could adjust the fridge door that way. My GE bottom freezer, the fridge door was rubbing against the bottom, and not closing properly without a little shove. Mine was adjustable with a 1/4" allen socket. 1-1.5 full turns brought it into adjustment. according to the serial number it was made in june 2016. I adjusted it once before, but this way is much more convenient.
@jrztoolzmore99912 ай бұрын
I'm glad everything worked out 👍😀
@kristinaepling89792 ай бұрын
Model is under to left when you open broiler
@jrztoolzmore99912 ай бұрын
Ok thank you 👍😀
@LanishaMclean2 ай бұрын
When this happens does it keep the door from sealing shut?
@jrztoolzmore99912 ай бұрын
Not really, but It depends on low the door is, if you dont feel coolness around your door you should be ok, but the door should be raised just in case. Hope this helps 👍
@evangelianordyke35332 ай бұрын
💪 Promo sm
@jrztoolzmore99912 ай бұрын
No this isnt a promo sm, I needed a vise after I built my work bench to help me with my Projects that's all. 👍
@DefHimself2 ай бұрын
I did this and thought I broke my wiper arm and freaked out lol
@jrztoolzmore99912 ай бұрын
Funny thing is ,,, I did the same thing LOL
@youtubeKathy3 ай бұрын
thank you! I just bought a new head for a hyper tough H2510 and this worked exactly like you did it to remove the old head with that teeth washer.
@jrztoolzmore99913 ай бұрын
Your welcome 😀👍
@MrCreateNothing3 ай бұрын
Since the vice swivels, you are limiting yourself by not mounting it at the corner of your bench.
@jrztoolzmore99913 ай бұрын
Hi, my vise will be re-mounted again,,,so I can have full access of the full swivel
@bullseyedixon56603 ай бұрын
thanks
@jrztoolzmore99913 ай бұрын
Your welcome 👍
@garyjenkins66293 ай бұрын
Thank you for sharing this video! There isn't a lot of info on the 2002-03 mowers. I have had problems after changing my belt. I'm thinking with the pulleys and spring.
@jrztoolzmore99913 ай бұрын
Your welcome , if your pulleys and spring are bad , ther is a possible chance it could be it,,, my pulleys on mine were all good ,,, it was just my drive belt that was stretched and had alot of cracks around the whole belt. Is your belt new??
@garyjenkins66293 ай бұрын
@@jrztoolzmore9991 Yes, new belt. I will check the pulleys and spring. I'm thinking about a tighter belt. Maybe 1/2 x 87 instead of 89.
@smck33993 ай бұрын
Thank you! Thank you! I was in tears, got the door off but couldn't for the life of myself figure out how to get it back on. I thought I had broke it. Watched your video and it slipped right on. You, Sir are a godsend!
@jrztoolzmore99913 ай бұрын
I'm really glad my video helped you👍 thanks so much for the kind words 😀
@user-hu4qh6hc5k4 ай бұрын
Thanks for help, I bought with 0 miles That's what the odometer said, I don't know if you can reset the odometer, now has 9 miles it has an 800 miles warranty it does come with a manual they recommend 10w-30 but it is hard to find locally, and I don't know the quality of the oil right now, "after 5 months sitting on the store " but I do know that it was delivered to the dealer September 9, 2023 it
@jrztoolzmore99914 ай бұрын
1. You can check the motor oil by unscrewing the oil dipstick and using a paper towel and if oil is really black change it by using the same oil 10w30,,,, you cannot reset the odometer,.if your scooter only has 9 miles on it , it's still under warranty toll you reach 800miles, you can possibly buy 10w30 conventional oil on amazon or at your local walmart. I hope this helps you out, let me know. 👍
@user-hu4qh6hc5k4 ай бұрын
@@jrztoolzmore9991 What do you recommend, not knowing what brand or what benefits the oil that already has could give me? Synthetic or non synthetic o
@user-hu4qh6hc5k4 ай бұрын
One of my friends recommended that I change the gy6 engine oil, when I just bought the motorcycle and use conventional oil, not synthetic 10w-30 10w-40, for the first 500 miles to help the engine break in, an then use synthetic oil is this true?
@jrztoolzmore99914 ай бұрын
how new is your scooter? And does it have any kind of warranty? Did your scooter come with a owner's manual??
@user-hu4qh6hc5k4 ай бұрын
@@jrztoolzmore9991 I bought it new zero miles, now has 9 miles and it has an 800 mile warranty it does come with a manual they recommend 10w-30 but it is hard to find locally
@user-hu4qh6hc5k4 ай бұрын
@@jrztoolzmore9991 Thanks for the help , I bought it zero miles That's what the odometer said, I don't know if you can reset the odometer, 5 months ago and I don't know what quality the oil is right now, but I do know that it was delivered to the dealer September 9, 2023 it now has 9 miles it has an 800 mile warranty it does come with a manual they recommend 10w-30 but it is hard to find locally
@user-hu4qh6hc5k4 ай бұрын
@@jrztoolzmore9991 Thanks for the help , I bought it zero miles That's what the odometer said, I don't know if you can reset the odometer, 5 months ago and I don't know what quality the oil is right now, but I do know that it was delivered to the dealer September 9, 2023 it now has 9 miles it has an 800 mile warranty it does come with a manual they recommend 10w-30 but it is hard to find locally,
@user-hu4qh6hc5k4 ай бұрын
@@jrztoolzmore9991 thanks for the help, I bought with 0 miles That's what the odometer said, I don't know if you can reset the odometer, now has 9 miles it has an 800 miles warranty it does come with a manual they recommend 10w-30 but it is hard to find locally, and I don't know the quality of the oil right now, "after 5 months sitting on the store " but I do know that it was delivered to the dealer September 9, 2023
@saraedmondson34654 ай бұрын
Great video!! Thank you
@jrztoolzmore99914 ай бұрын
Your welcome 👍
@WendyFoster-ek5ey4 ай бұрын
Got ithe door off easily, couldn't figure out why I couldn't reattach it. You showed me the missing step. I have the exact same oven. Thanks for your help!
@jrztoolzmore99914 ай бұрын
I'm 😀 my video helped you 👍
@Reboot274 ай бұрын
Thanks, I was looking how to remove it. Do you know with which to replace it? And do you replace to whole thing of only the rubber blade?
@jrztoolzmore99914 ай бұрын
Hi, you replace the wiper itself, not the rubber part. My wife's kia soul has a 10inch. I looked on Amazon and all they have is 11inch,,, I'm not sure if 11inch will work, because when you turn the wiper on the wiper possible will go over the window and will ruin the wiper blade rubber, YOU DON'T REPLACE THE WHOLE WIPER ASSEMBLY ARM ,,, JUST THE WIPER BLADE, I hope this helps 👍
@scottmc84 ай бұрын
thanks for sharing
@jrztoolzmore99914 ай бұрын
Your welcome 👍
@cliffwendy37654 ай бұрын
Not likely. Same issue with my scooter. I’m told it’s a fuel delivery problem. Probably a clog in the pathway since your jets are cleaned.
@jrztoolzmore99914 ай бұрын
when I put the carburetor back on the scooter without air filter and started my scooter I looked in the back of the carburetor and gave it gas,,, the butterfly valve was broken and didn't move at all.
@cliffwendy37654 ай бұрын
@@jrztoolzmore9991 ok then there ya have it. Yup, when the butterfly broke on my tractor I had to get a new carb. I’ll be soaking my scooter carb tomorrow. Maybe that will jar my clog loose.
@rockwithmoss19014 ай бұрын
You are absolutely fantastic. The tutorial you showed is better than any of the others I found on youtube and I've watched twelve others today. The very clear instructions and video about replacing the brake switches was something that none of the other videos on youtube covered. Please buy a lottery ticket as you will definitely win. ❤❤❤ from a 70 year old lady in Florida with a 12 year old Wolf 150cc scooter with 40,000 miles.
@jrztoolzmore99914 ай бұрын
Thank you so much for that complement 😀 , it means the world to me, knowing my scooter video's helped you ❤👍😀
@user-hb9fr5nu6l5 ай бұрын
The oven model number is listed on the front of the oven inside the bottom pull-out drawer along with the serial number - just pull out the drawer to see it!
@jrztoolzmore99915 ай бұрын
Ok thank you 👍
@williereneau31115 ай бұрын
"R" drill bit is 0.339 inches.
@jrztoolzmore99915 ай бұрын
Ok thanks 👍😀
@richardrecchia43355 ай бұрын
Thank you have the same one 👏👍
@jrztoolzmore99915 ай бұрын
Your welcome 👍
@uredskivid5 ай бұрын
" poopy -doopy " ? yeh thats about how good your whole video was . Ya never explained a thing -Typical parts replacer .I want my 29 minutes back .
@jrztoolzmore99915 ай бұрын
Thanks for your comment 👍
@jesusnava6435 ай бұрын
Thank you! I felt like I was using too much damn pressure.
@jrztoolzmore99915 ай бұрын
I hope it turned out ok? When I was removing the wiper, I gave it a little tug. My wife's rear wiper has never been removed before, but we had before this soul was a 2016, and when I replaced the rear wiper , I had to tug on it to. 😀
@pepaego52835 ай бұрын
The cover looks good ❤👍👍
@jrztoolzmore99915 ай бұрын
Thanks 😀👍
@doroteocarrancosr94415 ай бұрын
Lee-haw
@jrztoolzmore99915 ай бұрын
😀
@HM_RELOADED5 ай бұрын
Great job, keep up the good work.
@jrztoolzmore99915 ай бұрын
Thanks 😀
@HM_RELOADED5 ай бұрын
@@jrztoolzmore9991 welcome
@thomastommarello26705 ай бұрын
My door keeps sagging down after I raise it as he did. Why? How can I keep the door from sagging after I raise it?
@jrztoolzmore99915 ай бұрын
There are screws on both ends of the fridgerator door, just remove the black cap to expose the screws and see if the screws are loose, one end at a time, if the screws are loose tighten the screws up and and reinstall the cap and your door wont sag. I hope this helps you, please let me know. Part 👍
Пікірлер
Really not a good idea to boost with a new vehicle 😢 Just to let you know
Thanks for the info,,, but I have been jumping my riding mower like that for over a year, my truck is old, but far from new LOL. the battery in the riding mower is completely dead, that's why I jump it.😀
Great video, I have the same oven but my oven door won’t completely open. Any suggestions how what would be causing the door to be stuck.
“Which” cleaner. Not “Witch” cleaner.
Sorry I spelled witch wrong, thank you 👍
But it says whitch.
Lol gracious answer to the critic, and on purpose or not, repeating the wrong spelling is hilarious! Thanks for the video! @@jrztoolzmore9991
Ywc 👍
Less talk and more work ???
I keep telling myself that, more video just less clips for me to edit! Thank you for letting me know and thanks for being kind about letting me know 👍😀
@@jrztoolzmore9991I’m not trying to hurt your feelings, just hoping more people will watch your videos and learn from You 😊
Good to deburr it before you get hurt or someone else 😊
I can still do it thank you 👍
Good stuff. Plain and simple! Shit, finally
Just get to repairing the headlight Jesus
It took a long time but it all worked out good 👍
@@jrztoolzmore9991 did not help one bit tbh. I've got everything working... Minus the headlight. Granted everything is custom on it. All replacement. I have a bullet style headlight from a motorcycle. So it's white black and blue. The harness is green blue and white.. green is ground and hooked into black the blues are connected the whites are connected.. still no headlight
I know on my wire colors are white,blue,green, on Heading harness,,, I know if you put a different Heading on a gy6 scooter the wire colors might not match up,,, I hade a long a bullet headlight and it did not work. Gy6 scooters are very finicky, do you have the original headlight ? If so you might hafto put it back on.
@@jrztoolzmore9991 I have part of the original headlight harness. I bought this bike 2 years ago and it was trashed. I've got everything working minus the headlight. Lol so here I am trying to find a solution on yt for the ONE thing and nothing is available
Hello, thank you for the video! I have a GE side by side that was delivered a few months ago. The doors, like yours here, are not flush at top, about 1/8-1/4 inch off. I’m not worried about that so much, but the mechanism that controls the force of the last couple inches of closing is loud and creaky. It’s like a finger that sticks out and meets the door and retracts inside under the weight of the closing door. Also, my fridge does have the same adjustment nut you show here. So maybe they have the same mechanism. All I want to do is get the noise to stop. Wondering if I would want to put wd40 into the finger mechanism, where it sticks out from??? Both sides are rather creaky upon opening and closing… just the couple inches nearest the fridge.
Hi To whome it may concern, yes you can use wd-40 on both ends of the fridge door, when you open the door the part that sticks out on top of door put a little wd-40 on both ends, and close and reopen the door a few times and the noise should go away, if not ,,,repeat the process again and than you should be good. I hope this helps you out. 👍😀
Thanks 4 the help 😎👍
Your welcome 👍😀
Where do I get that red head? for my Murry M2500?
I'm not sure, the one in my video I found in someone's garbage,,, you can try amazon, ebay, if I didn't find that red head for my murray, I definitely would try amazon or ebay. I hope this helps 😀
Please do not stop making videos. This was extremely helpful! So many people post “how-to”videos that basically copy previously posted almost identical “how-to” videos step by step-the same instructions over and over. There was a need for what you posted here with cleaning under the glass stove-top! I really do hope you continue to make videos like this one that dive into the more complicated aspects of “how-to” - this was a tremendous help and I was able to finally clean under my glass stove top after twelve years!!!
I am so 😀 that my video helped you out, thank you so much for the comment it means the world to me 😀 thank you again.
Just got the man version 20 bucks yard sale
Oh wow 👍
Still can't figure it out lol
I'm glad the video helped 👍😀
Thank you!
Your welcome 😀
My husband is the CRO of a company and just sold his last company to one of the top companies in THE WORLD and couldn’t figure out how to put the door back on. God bless you, you saved my marriage.
I'm very happy for you both and glad the video helped you out 😀👍
Also many new scooters is delivered with too low idle resulting in the engine stops sometimes at a red light in traffic....
That is true,,, my friend bought a new gy6 50cc scooter, his carburetor had 102 main jet 85 pilot jet,, way to big, he lives in florida, so I put a 79 main jet and 32 pilot jet and some tweaking and know he Is all set.
Excellent video, thank you for sharing 👍
Thank you, your welcome 😀👍
What if the wires are cut on your scooter how do you connect them when you have 4 wires and there are 5 on the new ignition switch?
It depends on the ignition switch, if you only need 4 wires and the 5th wire you don't need just cap it off.
Thanks. You made it easy, 👍
Your welcome, I'm glad the video helped 😀👍
Cutting the pulley is nuts, just put the belt on rear and then the three small pulleys
I’ve been watching your videos since near the beginning and you are definitely by far the best at what you do!! Keep it up JRZ Toolz your going to be huge one day! Keep making my weekly watch worth it!!!
Hi clashingwithtrey, thank you so much for your comment it means alot to me. Thank you so much. 😀👍
Thx. did not know you could adjust the fridge door that way. My GE bottom freezer, the fridge door was rubbing against the bottom, and not closing properly without a little shove. Mine was adjustable with a 1/4" allen socket. 1-1.5 full turns brought it into adjustment. according to the serial number it was made in june 2016. I adjusted it once before, but this way is much more convenient.
I'm glad everything worked out 👍😀
Model is under to left when you open broiler
Ok thank you 👍😀
When this happens does it keep the door from sealing shut?
Not really, but It depends on low the door is, if you dont feel coolness around your door you should be ok, but the door should be raised just in case. Hope this helps 👍
💪 Promo sm
No this isnt a promo sm, I needed a vise after I built my work bench to help me with my Projects that's all. 👍
I did this and thought I broke my wiper arm and freaked out lol
Funny thing is ,,, I did the same thing LOL
thank you! I just bought a new head for a hyper tough H2510 and this worked exactly like you did it to remove the old head with that teeth washer.
Your welcome 😀👍
Since the vice swivels, you are limiting yourself by not mounting it at the corner of your bench.
Hi, my vise will be re-mounted again,,,so I can have full access of the full swivel
thanks
Your welcome 👍
Thank you for sharing this video! There isn't a lot of info on the 2002-03 mowers. I have had problems after changing my belt. I'm thinking with the pulleys and spring.
Your welcome , if your pulleys and spring are bad , ther is a possible chance it could be it,,, my pulleys on mine were all good ,,, it was just my drive belt that was stretched and had alot of cracks around the whole belt. Is your belt new??
@@jrztoolzmore9991 Yes, new belt. I will check the pulleys and spring. I'm thinking about a tighter belt. Maybe 1/2 x 87 instead of 89.
Thank you! Thank you! I was in tears, got the door off but couldn't for the life of myself figure out how to get it back on. I thought I had broke it. Watched your video and it slipped right on. You, Sir are a godsend!
I'm really glad my video helped you👍 thanks so much for the kind words 😀
Thanks for help, I bought with 0 miles That's what the odometer said, I don't know if you can reset the odometer, now has 9 miles it has an 800 miles warranty it does come with a manual they recommend 10w-30 but it is hard to find locally, and I don't know the quality of the oil right now, "after 5 months sitting on the store " but I do know that it was delivered to the dealer September 9, 2023 it
1. You can check the motor oil by unscrewing the oil dipstick and using a paper towel and if oil is really black change it by using the same oil 10w30,,,, you cannot reset the odometer,.if your scooter only has 9 miles on it , it's still under warranty toll you reach 800miles, you can possibly buy 10w30 conventional oil on amazon or at your local walmart. I hope this helps you out, let me know. 👍
@@jrztoolzmore9991 What do you recommend, not knowing what brand or what benefits the oil that already has could give me? Synthetic or non synthetic o
One of my friends recommended that I change the gy6 engine oil, when I just bought the motorcycle and use conventional oil, not synthetic 10w-30 10w-40, for the first 500 miles to help the engine break in, an then use synthetic oil is this true?
how new is your scooter? And does it have any kind of warranty? Did your scooter come with a owner's manual??
@@jrztoolzmore9991 I bought it new zero miles, now has 9 miles and it has an 800 mile warranty it does come with a manual they recommend 10w-30 but it is hard to find locally
@@jrztoolzmore9991 Thanks for the help , I bought it zero miles That's what the odometer said, I don't know if you can reset the odometer, 5 months ago and I don't know what quality the oil is right now, but I do know that it was delivered to the dealer September 9, 2023 it now has 9 miles it has an 800 mile warranty it does come with a manual they recommend 10w-30 but it is hard to find locally
@@jrztoolzmore9991 Thanks for the help , I bought it zero miles That's what the odometer said, I don't know if you can reset the odometer, 5 months ago and I don't know what quality the oil is right now, but I do know that it was delivered to the dealer September 9, 2023 it now has 9 miles it has an 800 mile warranty it does come with a manual they recommend 10w-30 but it is hard to find locally,
@@jrztoolzmore9991 thanks for the help, I bought with 0 miles That's what the odometer said, I don't know if you can reset the odometer, now has 9 miles it has an 800 miles warranty it does come with a manual they recommend 10w-30 but it is hard to find locally, and I don't know the quality of the oil right now, "after 5 months sitting on the store " but I do know that it was delivered to the dealer September 9, 2023
Great video!! Thank you
Your welcome 👍
Got ithe door off easily, couldn't figure out why I couldn't reattach it. You showed me the missing step. I have the exact same oven. Thanks for your help!
I'm 😀 my video helped you 👍
Thanks, I was looking how to remove it. Do you know with which to replace it? And do you replace to whole thing of only the rubber blade?
Hi, you replace the wiper itself, not the rubber part. My wife's kia soul has a 10inch. I looked on Amazon and all they have is 11inch,,, I'm not sure if 11inch will work, because when you turn the wiper on the wiper possible will go over the window and will ruin the wiper blade rubber, YOU DON'T REPLACE THE WHOLE WIPER ASSEMBLY ARM ,,, JUST THE WIPER BLADE, I hope this helps 👍
thanks for sharing
Your welcome 👍
Not likely. Same issue with my scooter. I’m told it’s a fuel delivery problem. Probably a clog in the pathway since your jets are cleaned.
when I put the carburetor back on the scooter without air filter and started my scooter I looked in the back of the carburetor and gave it gas,,, the butterfly valve was broken and didn't move at all.
@@jrztoolzmore9991 ok then there ya have it. Yup, when the butterfly broke on my tractor I had to get a new carb. I’ll be soaking my scooter carb tomorrow. Maybe that will jar my clog loose.
You are absolutely fantastic. The tutorial you showed is better than any of the others I found on youtube and I've watched twelve others today. The very clear instructions and video about replacing the brake switches was something that none of the other videos on youtube covered. Please buy a lottery ticket as you will definitely win. ❤❤❤ from a 70 year old lady in Florida with a 12 year old Wolf 150cc scooter with 40,000 miles.
Thank you so much for that complement 😀 , it means the world to me, knowing my scooter video's helped you ❤👍😀
The oven model number is listed on the front of the oven inside the bottom pull-out drawer along with the serial number - just pull out the drawer to see it!
Ok thank you 👍
"R" drill bit is 0.339 inches.
Ok thanks 👍😀
Thank you have the same one 👏👍
Your welcome 👍
" poopy -doopy " ? yeh thats about how good your whole video was . Ya never explained a thing -Typical parts replacer .I want my 29 minutes back .
Thanks for your comment 👍
Thank you! I felt like I was using too much damn pressure.
I hope it turned out ok? When I was removing the wiper, I gave it a little tug. My wife's rear wiper has never been removed before, but we had before this soul was a 2016, and when I replaced the rear wiper , I had to tug on it to. 😀
The cover looks good ❤👍👍
Thanks 😀👍
Lee-haw
😀
Great job, keep up the good work.
Thanks 😀
@@jrztoolzmore9991 welcome
My door keeps sagging down after I raise it as he did. Why? How can I keep the door from sagging after I raise it?
There are screws on both ends of the fridgerator door, just remove the black cap to expose the screws and see if the screws are loose, one end at a time, if the screws are loose tighten the screws up and and reinstall the cap and your door wont sag. I hope this helps you, please let me know. Part 👍
thanks!
Your welcome 👍
كم رقم قياس ماسحه خلفيه كيت سول 2021
Sorry , please translate for me, thanks