Hi Great video but i am sure you cannot have wood over a consumer unit in the UK.
@annewaromi30266 күн бұрын
Wow...I really want to learn with you about making that cross.b
@crames10009 күн бұрын
Absolutely Brill. Thank you. Your a genius
@bass357110 күн бұрын
What kind of router bits you used?
@fionaarchary605819 күн бұрын
Would you be able to send me a list of materials used. I would like to attempt this for my home bar
@lowesjoinery303114 күн бұрын
Yes, sure
@user-ez3lw7ld2b23 күн бұрын
gracias por tu canal q ha sido de gran ayu d a con tus proyectos bendiciones
@user-qi1oq2uj7j27 күн бұрын
Is it necessary to notch the wood or can it just be 2 flat ends against each other
@lowesjoinery303114 күн бұрын
Yes sure it can
@user-ox2nc6nh1uАй бұрын
People: nice tip Blind people: WTF
@robervar1097Ай бұрын
Once the white base came off it became more pestle shape
@robervar1097Ай бұрын
Once the white base came off it became more pestle shape
@dacianuscatuАй бұрын
Love you buddy nice work
@lowesjoinery303114 күн бұрын
Thanks 👍
@julesjay1634Ай бұрын
I bought a mirka deros and i had to send it back after just a couple uses because it was faulty, ordered the festool to replace it for the same reliability reasons :/ the deros was soooo much fun to work with when it worked...the balance, the feel, the weight everything was perfect it's a shame really :/
@lowesjoinery303114 күн бұрын
Thanks for sharing
@THEXOCUTORАй бұрын
great videos mate, an inspiration to those that want to start doing something similar!
@alangeorgebarstowАй бұрын
Excellent tips, thanks, but you're showing your youth with that "mini kitchen sieve". It's a tea-strainer (used in the days before teabags).😊
@ARw275Ай бұрын
Are you serious. Why has this never occurred to me???.
@chrissvenningson1747Ай бұрын
Good points. I think it’s about getting that air pressure out.
@afraz84Ай бұрын
Thank you for very precise and clear video! How much do you thin down the primer and the paint and do you use water for thinning it?
@user-cv3kg1jj8uАй бұрын
Hello i want to ask you about the length width of these numbers
@dilligaf23862 ай бұрын
Sorry, I had to turn it off because of all the tut swallowing. Go to the doctor.
@user-qd4io3ne3l2 ай бұрын
我也有您这款箱子,但是不会改造。
@user-sn6oq1ns7y2 ай бұрын
😊🎉🎉🎉
@lyterlivingservicedaccommo9032 ай бұрын
what do you charge to make these and where are you based?
@benjaminposa72452 ай бұрын
Man…. You are doing Gods work 🫡
@davidvogel36862 ай бұрын
Ya but who says that that tube would of leaked. You took a new one. Do it one one that leaks. And ya, it’s just gonna squirt out in the gun and make a mess.
@roydodd46942 ай бұрын
❤❤it 😊😊
@roydodd46942 ай бұрын
❤❤it good man 😊😊
@roydodd46942 ай бұрын
❤❤it😊😊
@PBunyanOx2 ай бұрын
Who's Larry and why is he so happy?
@cabindad402 ай бұрын
How does it not squeeze out the punctures you made with the knife? Does he respond???
@lowesjoinery30312 ай бұрын
Magic 🎩 🪄 🔮
@HHHomestead2 ай бұрын
Freaking GENIUS.
@mckeon19602 ай бұрын
Thank you so so so much. Just wanted a simple gate. Iv never made one, 6os is not the age women should be starting these projects. Do you not use glue, how does the wood expand and shirk with weather. Thank you
@charleslyall49112 ай бұрын
Hi ,do you find the pocket jig better than a biscuit jig ,thanks
@triumfdula88303 ай бұрын
What was the total distance from the edge of the mounting plate screws, and what sort of screws where they?
@juniorbirdman46503 ай бұрын
your advice on bracing is wrong, how are you leaving this video up????
@mzcholachalado0926722 күн бұрын
How is it that its wrong?
@Manxpm3 ай бұрын
Hi mate- I have some shaker wardrobe doors to make over weekend so hope you get this comment and question!! Height of my doors is just under 2m. Have you ever had these twist ? I can only get 18mm mdf.
@lowesjoinery30313 ай бұрын
Hey... so 2m is fine I would go more towards this method I made them in the video.. 18mm should be OK of thats all you can get .. some people do the plant on method iv heard they bow and twist..
@user-bn9wb3vs7p3 ай бұрын
Why don't people talk when making videos so they can explain as to what they are doing. I hate videos like these
@andrebonastre45973 ай бұрын
Waiting for the part where you mark the arche.
@uhN0id3 ай бұрын
What grit sandpaper did you use between coats?
@lowesjoinery30313 ай бұрын
240g
@uhN0id3 ай бұрын
@@lowesjoinery3031 thanks for replying so quickly. Literally about to walk out the door to restock on different grits and 220 was the highest I planned on getting but I'll grab that 240!
@davidwright58533 ай бұрын
what size tip are you using on this ? thanks
@lowesjoinery30313 ай бұрын
1.5
@Farinapini3 ай бұрын
A commercial-level workshop is stretching the 'homemade' badge
@lowesjoinery30313 ай бұрын
Just a couple sheds in my garden mate 👍
@fireblaster99613 ай бұрын
Them boards looked awful. Someone is gonna have fun fitted that bowed and twisted
@lowesjoinery30313 ай бұрын
Gates still going strong and straight but thanks for the comment
@richardmckrell48993 ай бұрын
No one just knows, you need to use a viscosity cup and time it.
@lowesjoinery30313 ай бұрын
Nope
@lowesjoinery30313 ай бұрын
Spraying a car yes .... but for emulsion type paints that's not needed
@MatSmithLondon3 ай бұрын
Can these be used for larger understair doors? e.g. if you use 3 hinges per door?
@MatSmithLondon3 ай бұрын
Ugh - I’ve answered my own question. Yes they can but so much to think about with inset doors with irregular shapes. I’ve made my own KZread vids on this subject now!
@ballygarran3 ай бұрын
What would the dimensions be for a 6ft cross. So main upright 8ft, 2ft in ground leaving 6ft exposed, what width would the arms be and how far down from the top. Thanks in advance
@adamc69883 ай бұрын
Buddy I hope you don’t mind me giving you a bit of feedback on your video. Firstly hats off to you, you’re clearly shit hot at what you do so fair play and respect to you. It someday in the very distant future I could even be half as good as you I would be a very happy man indeed. Ok so here’s a little bit of feedback for you buddy………..I clicked on this video with the hope it was going to teach me the basics on how a total novice like myself (I currently don’t even own a saw that’s how green I am!) would be able to learn and hopefully follow along so that I could attempt to follow your instruction and hopefully make a cabinet or a wardrobe for myself. So as I’m sure you can appreciate I was bitterly disappointed when I watched you just cracking on with the build without explaining anything at all. What tools you used, how and why you used them there was no explanation or advice at all, so sadly it’s not very helpful as a guide at all I’m sorry to say. I don’t want to come across as some sort of hater so please take this feedback as constructive. All I’m saying is that your clearly an expert in joinery so you would surely be able to offer tons of top tips and advice if you were to make your videos with a detailed guide as to what, how and why your doing what your doing.
@SergioGonzalez-rk6th3 ай бұрын
Where can i get the lighting hardware? Thanks in advance
@lowesjoinery30313 ай бұрын
Check description
@plan8plants4183 ай бұрын
I have F&B paint throughout my house. I will say that it is not the easiest to work with. It requires a bit of extra work to get full coverage but the colours are amazing and worth the extra effort IMO
@lowesjoinery30313 ай бұрын
Thanks for sharing!
@vfswan543 ай бұрын
Rubbish
@lowesjoinery30313 ай бұрын
Thank you 😊
@helenalovelock10304 ай бұрын
Have you tried the newer Dead Flat Farrow and ball ? Apparently you can use it in walls and trim in heavy traffic areas scrubbable etc
@lowesjoinery30314 ай бұрын
I haven't used it no... is it worth a look 🤔
@mrklean02924 ай бұрын
I took one sip of the green Koo-Aid and can't stop drinking it. This is the next investment on my list. Thank you for the video.
Пікірлер
Hi Great video but i am sure you cannot have wood over a consumer unit in the UK.
Wow...I really want to learn with you about making that cross.b
Absolutely Brill. Thank you. Your a genius
What kind of router bits you used?
Would you be able to send me a list of materials used. I would like to attempt this for my home bar
Yes, sure
gracias por tu canal q ha sido de gran ayu d a con tus proyectos bendiciones
Is it necessary to notch the wood or can it just be 2 flat ends against each other
Yes sure it can
People: nice tip Blind people: WTF
Once the white base came off it became more pestle shape
Once the white base came off it became more pestle shape
Love you buddy nice work
Thanks 👍
I bought a mirka deros and i had to send it back after just a couple uses because it was faulty, ordered the festool to replace it for the same reliability reasons :/ the deros was soooo much fun to work with when it worked...the balance, the feel, the weight everything was perfect it's a shame really :/
Thanks for sharing
great videos mate, an inspiration to those that want to start doing something similar!
Excellent tips, thanks, but you're showing your youth with that "mini kitchen sieve". It's a tea-strainer (used in the days before teabags).😊
Are you serious. Why has this never occurred to me???.
Good points. I think it’s about getting that air pressure out.
Thank you for very precise and clear video! How much do you thin down the primer and the paint and do you use water for thinning it?
Hello i want to ask you about the length width of these numbers
Sorry, I had to turn it off because of all the tut swallowing. Go to the doctor.
我也有您这款箱子,但是不会改造。
😊🎉🎉🎉
what do you charge to make these and where are you based?
Man…. You are doing Gods work 🫡
Ya but who says that that tube would of leaked. You took a new one. Do it one one that leaks. And ya, it’s just gonna squirt out in the gun and make a mess.
❤❤it 😊😊
❤❤it good man 😊😊
❤❤it😊😊
Who's Larry and why is he so happy?
How does it not squeeze out the punctures you made with the knife? Does he respond???
Magic 🎩 🪄 🔮
Freaking GENIUS.
Thank you so so so much. Just wanted a simple gate. Iv never made one, 6os is not the age women should be starting these projects. Do you not use glue, how does the wood expand and shirk with weather. Thank you
Hi ,do you find the pocket jig better than a biscuit jig ,thanks
What was the total distance from the edge of the mounting plate screws, and what sort of screws where they?
your advice on bracing is wrong, how are you leaving this video up????
How is it that its wrong?
Hi mate- I have some shaker wardrobe doors to make over weekend so hope you get this comment and question!! Height of my doors is just under 2m. Have you ever had these twist ? I can only get 18mm mdf.
Hey... so 2m is fine I would go more towards this method I made them in the video.. 18mm should be OK of thats all you can get .. some people do the plant on method iv heard they bow and twist..
Why don't people talk when making videos so they can explain as to what they are doing. I hate videos like these
Waiting for the part where you mark the arche.
What grit sandpaper did you use between coats?
240g
@@lowesjoinery3031 thanks for replying so quickly. Literally about to walk out the door to restock on different grits and 220 was the highest I planned on getting but I'll grab that 240!
what size tip are you using on this ? thanks
1.5
A commercial-level workshop is stretching the 'homemade' badge
Just a couple sheds in my garden mate 👍
Them boards looked awful. Someone is gonna have fun fitted that bowed and twisted
Gates still going strong and straight but thanks for the comment
No one just knows, you need to use a viscosity cup and time it.
Nope
Spraying a car yes .... but for emulsion type paints that's not needed
Can these be used for larger understair doors? e.g. if you use 3 hinges per door?
Ugh - I’ve answered my own question. Yes they can but so much to think about with inset doors with irregular shapes. I’ve made my own KZread vids on this subject now!
What would the dimensions be for a 6ft cross. So main upright 8ft, 2ft in ground leaving 6ft exposed, what width would the arms be and how far down from the top. Thanks in advance
Buddy I hope you don’t mind me giving you a bit of feedback on your video. Firstly hats off to you, you’re clearly shit hot at what you do so fair play and respect to you. It someday in the very distant future I could even be half as good as you I would be a very happy man indeed. Ok so here’s a little bit of feedback for you buddy………..I clicked on this video with the hope it was going to teach me the basics on how a total novice like myself (I currently don’t even own a saw that’s how green I am!) would be able to learn and hopefully follow along so that I could attempt to follow your instruction and hopefully make a cabinet or a wardrobe for myself. So as I’m sure you can appreciate I was bitterly disappointed when I watched you just cracking on with the build without explaining anything at all. What tools you used, how and why you used them there was no explanation or advice at all, so sadly it’s not very helpful as a guide at all I’m sorry to say. I don’t want to come across as some sort of hater so please take this feedback as constructive. All I’m saying is that your clearly an expert in joinery so you would surely be able to offer tons of top tips and advice if you were to make your videos with a detailed guide as to what, how and why your doing what your doing.
Where can i get the lighting hardware? Thanks in advance
Check description
I have F&B paint throughout my house. I will say that it is not the easiest to work with. It requires a bit of extra work to get full coverage but the colours are amazing and worth the extra effort IMO
Thanks for sharing!
Rubbish
Thank you 😊
Have you tried the newer Dead Flat Farrow and ball ? Apparently you can use it in walls and trim in heavy traffic areas scrubbable etc
I haven't used it no... is it worth a look 🤔
I took one sip of the green Koo-Aid and can't stop drinking it. This is the next investment on my list. Thank you for the video.
Yes brother 🙌