How To Stop Caulk/Silicone From Coming Out After You Use It..Painting Tips
Ойын-сауық
Hello folks and thanks for joining me on this short be sweet(hopefully) upload..
i very quickly show you how i solve the issue of the contents from a tube from keep coming out after you stop using it....
so i hope you like it.. thanks for watching and ill catch you on the next upload....
arranlowe.wixsite.com/lowesjo...
/ lowesjoinery
/ lowesjoinery
/ lowes-bespoke-joinery-...
Пікірлер: 57
Absolutely Brill. Thank you. Your a genius
Man…. You are doing Gods work 🫡
It worked great thank you I liked and subscribed
Who needs trade school. Thanks dude you're a legend.
Love this love you!
But don't you have to worry about it squirting out the bottom?
Omfg, I have been dealing with this for decades. Tried different guns, clicking the thumb release etc.. The amount of wasted caulk, let alone time. And this comes along now. I’m almost pissed that it was this easy. Bro, thx
@lowesjoinery3031
Жыл бұрын
Thanks
Thanks for that 👍
Good points. I think it’s about getting that air pressure out.
Freaking GENIUS.
Thanks man . . .
Yep and also the gun has a nossle tip cutter . Have a look 😊
He's good with caulk! Mine drips all over the place.
Gee thanks for that tip. Now I have caulking coming out both ends continuously due to the air bubble that n the middle.
@lowesjoinery3031
2 жыл бұрын
Glad it helped
@BlueDart1971
2 жыл бұрын
@@lowesjoinery3031 it didn’t help. It just made a mess.
@dapperdingo
2 жыл бұрын
@@BlueDart1971 Almost every tube of Dap brand caulk has the infamously (and purposely in my opinion), placed bubble around 3/4 to the bottom end of the tube. It is designed to create constant waste and better sales for the Dap corporation. I found over my years of painting and caulking that before coming to the end of your caulk bead application , you release the pressure on the gun and continue squeezing the tube with the other bead smoothing hand till the end of the bead is completed. The bubble will depressurize because the tube is indented from the sides from squeezing with the hand and the continuous splooging from the tip will be non existent.
NOOICE!
What if you don't want to use the whole tube at once? Does the holes in the bottom dry it up? Do you cover those?
Nice tip buddy but what effect does it have on the caulk if it’s not used and left in the tube for weeks or months?
@KirkyDrums
Жыл бұрын
No tradie would complain about a 2 dollar filler .. throw it out . Much better having to clean ya fingers and rags with the overflow and all over the groundsheet.
@billesposito2112
9 ай бұрын
Dude you are the man . I've lost thousands of dollars using PL Premium . That shit is so bad with it oozing I lose half a tube every time I use it. I'm looking at it oozing right now. At 9 dollars a tube that's no joke. Thank you.
@cabindad40
2 ай бұрын
@@billesposito2112does it actually work? I use PL premium all the time and i came here to find a solution to this exact issue
what is the best way to store the caulk after it has been pierced in the back? also does the caulk leak from the back end?
@jamesreid7905
2 жыл бұрын
Cut the finger off of a rubber glove and wrap around top. Gently depress a little caulk out and it will dry inside glove at the tip keeping the inside of the tube from drying.
The grasshopper has much to learn from the master
Caulking video!
@lowesjoinery3031 where does the excess pressure/caulk go, if not the front or back? If it's not leaking out the front then one would think the caulk would be coming out the back.
@NatalieTaekwondo
4 ай бұрын
Two forces at play - push and pull (release). When you squeeze the handle of the caulking gun and let go, ideally the plunger would retract just a bit to release pressure. But it seldom does with such viscous material inside temporarily suctioning it in place. So there are two options: 1. Allow the pressure to release through flow out of the tip, or 2. Remove the applied pressure by allowing the plunger to rebound. The small slits in the tube’s plunger allow it to retract a tiny bit with incoming air while retracting just enough to release pressure in the cartridge.
Soo i cut the back of the tube like you showed me, and the caulk still comes out the orher end exactly the same as it was... and yes im releasing pressure
Went so fast I couldn’t tell what you did
People: nice tip Blind people: WTF
Don't work with Pl Premium . Dammit ! I was so psyched. Now I feel crushed. I even cut the plunger cap end out of a used one so the glue didnt ooze out the back all over my gun. Now it drools out both ends . I tried other glues but nothing works as good.
Ya but who says that that tube would of leaked. You took a new one. Do it one one that leaks. And ya, it’s just gonna squirt out in the gun and make a mess.
Im not sure how to feel right now with all this caulk talk 😂😂
@lowesjoinery3031
4 ай бұрын
Lol that your mind mate lol
It's only air bubbles in the tube. Smash a chopstick Down there an give it a mix
It doesn’t work unless you release the tension by unclicking the lock in the back, which you did.
@sidelinerbeekeeper
2 жыл бұрын
The product just comes out the other end in the gun.
@makirichi
Жыл бұрын
I applied caulking and silicone for years at different temperatures, and this remains a pain in the neck. Your magic trick sounds nicer, but i don't believe it. There's a build-up pressure with air bubbles in the product, and factories know it. Cutting the bottom will just release air... in the bottom. It's not rocket science. But I do know that if you open your tube from a warmer room to a colder application room, it will help rather than the reverse. Common sense, right?
Who's Larry and why is he so happy?
How does it not squeeze out the punctures you made with the knife? Does he respond???
@lowesjoinery3031
2 ай бұрын
Magic 🎩 🪄 🔮
Hell yeah!
HERE’S THE FIX: Get a burgundy colored ‘Newborn’ gun! It is *truly* drip-free & a game changer for me! When you release the trigger it actually *stops* ! In the U.S., some (not all) Lowe’s carry them & they’re only like $12!!!! 🌟🌟🌟🌟🌟
@dylan-nguyen
Жыл бұрын
I accidentally bought the blue one.. isn’t dripless 😢 It had the better 18:1 thrust ratio but I didn’t know it wasn’t dripless!
@rgjr702
11 ай бұрын
Thing is you can set the caulk tube on the counter standing up without the gun and they keep seeping out
Where do you work? London?
@lowesjoinery3031
2 жыл бұрын
West Midlands mate
Sorry, WHAT did you really do? I do not understand.
Are you serious. Why has this never occurred to me???.
This doesn't work 🤦
@lowesjoinery3031
Жыл бұрын
Thanks
Load of bs!! Seems like it works until you take out the tube and realize it came out both ends!!! Lmfao what a joke
@lowesjoinery3031
Жыл бұрын
Thanks for your comment 👍
Nope.....didn't work.