Just tossed a 1 year old unit in trash, everyone who buys one has problems after warranty
@SlimSlashieСағат бұрын
I like Jim's take on Sollerman (Jim from Huckleberry Finn, that beautiful book that recently became so devious it MUST be banned. In fact, don't read it at all, it's garbage.) Huck F'n Finn FTW
@SlimSlashieСағат бұрын
A-A-Ron lol
@ivano427 сағат бұрын
any old equipment that is still around is the good stuff
@damonbtc97018 сағат бұрын
Prick. Means a guy that's no guy. What's your pronouns ya old Canadian foookkytinik?
@damonbtc97018 сағат бұрын
Adverts ya old cock?
@davegreenleaf52729 сағат бұрын
Things going on the bay. She’s a bench anchor.
@bernardmcmahon35110 сағат бұрын
Only in America (and India) profit before everything
@user-dm8be1is4g21 сағат бұрын
The smell is mothballs.
@2dawgsmiked68422 сағат бұрын
"Hollow bacon" 😂😂😂
@bartnieuwendijk1024Күн бұрын
Best video iv’e seen in years
@skidooshizelКүн бұрын
Hey nice fancy box cutter you got there, but listen what we need is a torque wrench that moans like a pornstar at torque. Not even kiddin!
@adirondacker007Күн бұрын
My brother had a log loader mounted on an M-123 tank recovery truck. The dipper boom cylinder would air up if it sat around too long. It made for some pretty dangerous behavior from that boom if you didn't take a few minutes to work the air out of it.
@darranlynasКүн бұрын
You should still put one on the line.
@florianberka2279Күн бұрын
very authentic, nothing to be blamed
@KRich408Күн бұрын
Mine arrived a few days ago, made it look nice before putting it together. Went to my local ACE hardware they didn't know a 1" 24mm blade was made? Ok so off to the other lumber/hardware store in my little Michigan UP town, Nope no Dice, ok maybe the little Walmart you won't notice driving by unless you look to your side driving past it. Nope ugh. Ok so what are my options? Drive 120 miles to Duluth, 90 miles to Marquette, to go to a home Depot , or order online? Checking websites Lowe's is out of stock of Olfa blades?? Hmmm it's Amazon or Home Depot delivery. Im going to keep refining the knife while waiting for blades dang I might need to buy another one I might sand this one into oblivion waiting for blades 😅 I can't put it down I just want to cut up some boxes or score some drywall with it .
@williamallen2777Күн бұрын
I do love this man. But he just reinvented the strap wrench.
@thedevilinthecircuit1414Күн бұрын
You're either a Solder Soldier, or a Sodder Sodjer. You cannot be both.
@mikeeustice4452Күн бұрын
I think they watched you, the newer brushless version has a spindle lock
@Leo-qd2ud2 күн бұрын
Is there another step we have to take after paying for first in line, back when AVE first brought us this wicked knife idea?
@Leo-qd2ud2 күн бұрын
Damn. I guess I didn’t get the dibs email. Checked junk mail too. Can’t believe I missed the first run. Break yer frigggen heart
@ronfry58072 күн бұрын
As commented in the assembly vijeo, was surprised by the gift. Its a tool that will last a lifetime. LOVE IT!!
@ronfry58072 күн бұрын
My wife surprised me with this awesome kit! Went together flawlessly and operates smooooth as butta! Thanks AvE!!
@armegeddon222 күн бұрын
Old equipment was made to last as long as possible. New stuff is made to be replaced.
@DUKE_of_RAMBLE2 күн бұрын
I somehow missed this video, so this comment will likely go unseen by Uncle B... But, two thoughts: 1) Belt clip attachment? Just a simple style, doesn't need to be fancy or titanium 😊 2) Would it be useful to omit the very end of the outer metal strip, leaving just the Titanium strip? That way it's like that yellow one, offering a very thin cross section where the blade comes out of, but is still offering some rigidity! I figure with just enough to delete that last screw, should still be enough to prevent flexure in the now exposed and unclamped titanium layer. Bonus, in that the now exposed titanium will be able to show off any thermal coloring we apply! Eeeh?? 👍 or 👎 ?
@richardjensen71862 күн бұрын
You're almost Kantian, but you don't quite get there. Your vocabulary and articulation is much better than Kant's, but Kant was just a bit more perceptive about the nature of time (and space). More people would understand Kant if he had expressed himself as well as you do! 🙂
@user-of2py3gf3i2 күн бұрын
As a father of two fairly sensible teenagers that are about to graduate highschool; this was reassuring. Thank you.
@MarcusMussawar2 күн бұрын
conflagration an extensive fire which destroys a great deal of land or property.
@MarcusMussawar2 күн бұрын
conflagration
@eCitizen12 күн бұрын
Summer Teethinator. Worth it.
@bren420692 күн бұрын
hey. have you ever used sulfuric acid to dissolve a steel bolt that's broken off in aluminum?
@thedevilinthecircuit14143 күн бұрын
Parts kit arrivededed. I lapped all the parts on a 1200 diamond stone and screwed it together. The blade lock pin's bottom flange was about .001 too large in diameter; it was dragging on the lower tittytanium bar. I chucked the pin in a drill, ran the edge on a diamond stone to knock down the outer diameter, and *viola* sweet music! This is a nice knife.
@Unsuspected_sloth3 күн бұрын
I wanna drink the forbidden milk
@plumberguy21953 күн бұрын
Love mine! Heirloom quality but only complaint is blade guide dulls the blade! Tried a fresh pack of 5 blades, tested each one before putting in knife and after 4 or 5 extensions blade is dull. Hopefully a Teflon or similar plastic blade guide is in the works.
@user-zm8kb9ck5h3 күн бұрын
Thank you
@miguelquazar8833 күн бұрын
When it comes to watching a sharpening demonstration of any tool, this particular accent always gives me hope. Y'all know your sh*t when it comes to this sort of thing.
@briansmith92013 күн бұрын
Wish I would have waited for the sale....
@WeebRemover45003 күн бұрын
you can now buy tungsten carbide tipped drills for steel, and theyre sharp. i ordered a load, theyre about 10 euros for 10 in 5mm
@iDownshift3 күн бұрын
Jerryrigeverything has entered the chat.
@knighthawk35593 күн бұрын
As an Englishman, I can say that the quality of this ratchet leaves me charmingly befuddled. Already did I drop my nuts on the snap on truck for this......😢
@thegrey86433 күн бұрын
You can get rid of that sock in a pinch and just slap a steel case inline filter into the system.
@RedDogForge4 күн бұрын
not gonna lie. that torque stalling ya did hurt to watch, i know its for science and all but it just plain hurt...i stuck it out though. thanks hoss. great stuff.
@michaeltreen87854 күн бұрын
Dewclaw dat you?
@johnnyp55734 күн бұрын
Just assembled mine. Love it. May round the edges a bit
@Bobsterbear4 күн бұрын
Quick Question: What’s the recommended size for the Olfa blade? Looking forward to putting this together!
@MichaelDurellКүн бұрын
25mm
@toddbellows52824 күн бұрын
At least you didn't have to drop the tank.
@Clevelandsteamer3244 күн бұрын
It’s known as “shocking” it. Same thing as with a regular hammer
@Clevelandsteamer3244 күн бұрын
Flex ratchet wrench
@jimforsyth2.4 күн бұрын
I was just thinking you could change the seals in the rams to scarf cut Teflon and even if there is leakage shouldn't matter much
@100oracle4 күн бұрын
I found this video because i apparently burnt down the dumpster at my work after i threw away a linseed rag. I put some oil on the old sunbleached door and threw out the rag. It caught on fire about an hour later. All caught on their surveillance cameras
@ryanr2n2yc4 күн бұрын
Just got mine today!!! this thing is skookum as frig!
Пікірлер
Just tossed a 1 year old unit in trash, everyone who buys one has problems after warranty
I like Jim's take on Sollerman (Jim from Huckleberry Finn, that beautiful book that recently became so devious it MUST be banned. In fact, don't read it at all, it's garbage.) Huck F'n Finn FTW
A-A-Ron lol
any old equipment that is still around is the good stuff
Prick. Means a guy that's no guy. What's your pronouns ya old Canadian foookkytinik?
Adverts ya old cock?
Things going on the bay. She’s a bench anchor.
Only in America (and India) profit before everything
The smell is mothballs.
"Hollow bacon" 😂😂😂
Best video iv’e seen in years
Hey nice fancy box cutter you got there, but listen what we need is a torque wrench that moans like a pornstar at torque. Not even kiddin!
My brother had a log loader mounted on an M-123 tank recovery truck. The dipper boom cylinder would air up if it sat around too long. It made for some pretty dangerous behavior from that boom if you didn't take a few minutes to work the air out of it.
You should still put one on the line.
very authentic, nothing to be blamed
Mine arrived a few days ago, made it look nice before putting it together. Went to my local ACE hardware they didn't know a 1" 24mm blade was made? Ok so off to the other lumber/hardware store in my little Michigan UP town, Nope no Dice, ok maybe the little Walmart you won't notice driving by unless you look to your side driving past it. Nope ugh. Ok so what are my options? Drive 120 miles to Duluth, 90 miles to Marquette, to go to a home Depot , or order online? Checking websites Lowe's is out of stock of Olfa blades?? Hmmm it's Amazon or Home Depot delivery. Im going to keep refining the knife while waiting for blades dang I might need to buy another one I might sand this one into oblivion waiting for blades 😅 I can't put it down I just want to cut up some boxes or score some drywall with it .
I do love this man. But he just reinvented the strap wrench.
You're either a Solder Soldier, or a Sodder Sodjer. You cannot be both.
I think they watched you, the newer brushless version has a spindle lock
Is there another step we have to take after paying for first in line, back when AVE first brought us this wicked knife idea?
Damn. I guess I didn’t get the dibs email. Checked junk mail too. Can’t believe I missed the first run. Break yer frigggen heart
As commented in the assembly vijeo, was surprised by the gift. Its a tool that will last a lifetime. LOVE IT!!
My wife surprised me with this awesome kit! Went together flawlessly and operates smooooth as butta! Thanks AvE!!
Old equipment was made to last as long as possible. New stuff is made to be replaced.
I somehow missed this video, so this comment will likely go unseen by Uncle B... But, two thoughts: 1) Belt clip attachment? Just a simple style, doesn't need to be fancy or titanium 😊 2) Would it be useful to omit the very end of the outer metal strip, leaving just the Titanium strip? That way it's like that yellow one, offering a very thin cross section where the blade comes out of, but is still offering some rigidity! I figure with just enough to delete that last screw, should still be enough to prevent flexure in the now exposed and unclamped titanium layer. Bonus, in that the now exposed titanium will be able to show off any thermal coloring we apply! Eeeh?? 👍 or 👎 ?
You're almost Kantian, but you don't quite get there. Your vocabulary and articulation is much better than Kant's, but Kant was just a bit more perceptive about the nature of time (and space). More people would understand Kant if he had expressed himself as well as you do! 🙂
As a father of two fairly sensible teenagers that are about to graduate highschool; this was reassuring. Thank you.
conflagration an extensive fire which destroys a great deal of land or property.
conflagration
Summer Teethinator. Worth it.
hey. have you ever used sulfuric acid to dissolve a steel bolt that's broken off in aluminum?
Parts kit arrivededed. I lapped all the parts on a 1200 diamond stone and screwed it together. The blade lock pin's bottom flange was about .001 too large in diameter; it was dragging on the lower tittytanium bar. I chucked the pin in a drill, ran the edge on a diamond stone to knock down the outer diameter, and *viola* sweet music! This is a nice knife.
I wanna drink the forbidden milk
Love mine! Heirloom quality but only complaint is blade guide dulls the blade! Tried a fresh pack of 5 blades, tested each one before putting in knife and after 4 or 5 extensions blade is dull. Hopefully a Teflon or similar plastic blade guide is in the works.
Thank you
When it comes to watching a sharpening demonstration of any tool, this particular accent always gives me hope. Y'all know your sh*t when it comes to this sort of thing.
Wish I would have waited for the sale....
you can now buy tungsten carbide tipped drills for steel, and theyre sharp. i ordered a load, theyre about 10 euros for 10 in 5mm
Jerryrigeverything has entered the chat.
As an Englishman, I can say that the quality of this ratchet leaves me charmingly befuddled. Already did I drop my nuts on the snap on truck for this......😢
You can get rid of that sock in a pinch and just slap a steel case inline filter into the system.
not gonna lie. that torque stalling ya did hurt to watch, i know its for science and all but it just plain hurt...i stuck it out though. thanks hoss. great stuff.
Dewclaw dat you?
Just assembled mine. Love it. May round the edges a bit
Quick Question: What’s the recommended size for the Olfa blade? Looking forward to putting this together!
25mm
At least you didn't have to drop the tank.
It’s known as “shocking” it. Same thing as with a regular hammer
Flex ratchet wrench
I was just thinking you could change the seals in the rams to scarf cut Teflon and even if there is leakage shouldn't matter much
I found this video because i apparently burnt down the dumpster at my work after i threw away a linseed rag. I put some oil on the old sunbleached door and threw out the rag. It caught on fire about an hour later. All caught on their surveillance cameras
Just got mine today!!! this thing is skookum as frig!