Пікірлер

• 
  @shirleyotero18464 күн бұрын

  love it very nice Thank you

• 
  @atprints4 күн бұрын

  @@shirleyotero1846 you are most welcome

• 
  @jimmiedenise64448 күн бұрын

  How long will the image stay on the glass? Is it permanent or temporary?

• 
  @atprints4 күн бұрын

  @@jimmiedenise6444 thanks for your question. This stays on permanent. The only way it comes off is if you reactivate the polygloss or sand it off

• 
  @tammieford49759 күн бұрын

  Can you put this on a metal saw blade and sublimate on the blade?

• 
  @atprints4 күн бұрын

  @@tammieford4975 yes of course you can. If you do please send me a picture so I can see the finished product.

• 
  @shivkr2059 күн бұрын

  Tqsm good video, I have one question tho. Like in india an alternate product is available, which comes with catalyst as well as reducer. I didnt see you using this reducer. Can i just skip it?

• 
  @atprints4 күн бұрын

  @@shivkr205 hi, in this case the Polygloss came with the catalyst. No reduced is needed.

• 
  @manimarwaha2312 күн бұрын

  How to do for Eva foam?

• 
  @atprints4 күн бұрын

  @@manimarwaha23 hi, can you clarify your question please.

• 
  @smitht71716 күн бұрын

  Great video. What shirts are best that don't shrink or fade

• 
  @atprints4 күн бұрын

  Thanks for your question. I believe it depends. There are so many different brands so I am not 100% sure.

• 
  @thenaillady199116 күн бұрын

  In your opinion, is heat press a lucrative business choice?

• 
  @atprints14 күн бұрын

  @@thenaillady1991 thanks for your question. Yes it is. Especially if you are into tshirt sublimation printing. They are so many advantages.

• 
  @denisebest4129 күн бұрын

  Finally a video that shows exactly how do this! THANK YOU!

• 
  @atprints26 күн бұрын

  You're welcome! Thanks for your support.

• 
  @grandaygainАй бұрын

  Please lose the background music.

• 
  @LaMonte-dw5dmАй бұрын

  Great Video, Easy to watch and learn

• 
  @atprintsАй бұрын

  Thanks very much for your support.

• 
  @onielmills8087Ай бұрын

  YES I LEARN SOMETHING TODAY

• 
  @atprintsАй бұрын

  Awesome. I am happy you got value from the video.

• 
  @doicaini7734Ай бұрын

  Hey Allan love your dedication. Saw a 3 years old video of u just now, and taught that is a dead channel but seeing this video posted recently just cool job man. I have a question tho. What do you think about sublimation floor tiles, i would love to just buy some white ceramic tiles, and printe on them for my house. but i dont know if the print would stick or fade away in years because of washing them. sory eng is not my first language.

• 
  @atprintsАй бұрын

  Thanks very much for tuning into the channel and thanks for all of your support. I think printing on floor tiles is awesome. I have two videos that can help and I would encourage you to watch them and get a greater understanding. In the first video, I coated the tile with polygloss only - kzread.info/dash/bejne/d66bu5iOhcvRgps.htmlsi=D5a0E9ecma1xO0wa and the second video was a comparison between a sublimation tile vs a regular floor tile coated with polygloss - kzread.info/dash/bejne/gKeIrZeQh7O9esY.htmlsi=9AvJCErR3qge9oSl. If you use the Polygloss method and the tiles are exposed to consistent sunlight they will fade after a time. However, if they are indoors I believe there shouldn't be a problem. I am not 100% sure if water is thrown on them daily they would fade. I believe it shouldn't but I am not 100% sure. I hope these two videos help and give you a greater understanding.

• 
  @doicaini7734Ай бұрын

  @@atprints Thanks a loot i will check them right now. God bless you :)

• 
  @deenaldhunyАй бұрын

  Hi. Can you do sublimation printing on this visor?

• 
  @atprintsАй бұрын

  Thanks for your question. Yes you can. You would have to use a light color sun visor.

• 
  @deenaldhunyАй бұрын

  Thanks. Any recommendations for time and temperature!?

• 
  @atprintsАй бұрын

  You can use 385F for 60 seconds

• 
  @deenaldhunyАй бұрын

  Great. Thanks. Will try it!

• 
  @raquelreyes8573Ай бұрын

  Thank for your prompt reply what vinyl paper should i use again thanks i really like your video will recommend your channel to my family and friends many blessings

• 
  @atprintsАй бұрын

  You are most welcome. You can use this paper, it works great for me 👉 amzn.to/3GedNyK

• 
  @user-pd6if9bu6cАй бұрын

  great job can you do this with simulation ink?

• 
  @atprintsАй бұрын

  Thanks for your question. Yes you can use the sublimation process once the color of the umbrella is white or a very light color.

• 
  @tammymarshall6212Ай бұрын

  What have i done wrong Mynpicture looks faded

• 
  @atprintsАй бұрын

  Thanks for your question. If your picture is faded it could be the lack of pressure or lack of time. So make sure you have a medium pressure and the correct time frame.

• 
  @danielpuscasu6683Ай бұрын

  ❤❤❤

• 
  @atprintsАй бұрын

  Thanks for your support.

• 
  @angiwilliamson2707Ай бұрын

  What about sublimating on to rock slate that’s dark blue

• 
  @atprintsАй бұрын

  Sublimating on dark colors will be very difficult. If you surface is white you can change the color or your design to dark blue etc.

• 
  @angiwilliamson2707Ай бұрын

  Thanks, are the finishes food safe.

• 
  @atprintsАй бұрын

  Yes the polygloss is good safe but not dishwasher safe.

• 
  @angiwilliamson2707Ай бұрын

  Ps or add something to you polygloss coating

• 
  @atprintsАй бұрын

  Can you clarify this message please?

• 
  @angiwilliamson2707Ай бұрын

  Hi I want to sublimate onto rock slate which is dark grey/ blue. What can I use that is white to cover & aid sublimation.

• 
  @atprintsАй бұрын

  The only thing I can suggest is to paint it white,then use the polygloss solution to coat it and then sublimate onto it.

• 
  @danielpuscasu6683Ай бұрын

  What are those two solutions called and where can they be bought? Thank you!

• 
  @atprintsАй бұрын

  Thanks for your question. The name of the solutions are Polygloss and Catalyst. The link is also in the description of the video. You can purchase it here bit.ly/3CYZqu1.

• 
  @raquelreyes8573Ай бұрын

  Thank you for this video I have a epson ET-2803 ecotank printer can i use this printer to do vinyl sticker I am new with making sticker never done one i am doing resin can i use the sticker in my resin? hope to hear from you soon i just subscribe to you channel have a great and bless day

• 
  @atprintsАй бұрын

  Thanks for your question and support to the channel. Yes, your printer can work to print stickers. Once you purchase the sticker paper you can print on it, cut out your stickers and then place them on the resin if you want to make resin stickers. Hope this helps.

• 
  @neisha06ifyАй бұрын

  Hi I have been getting some bad subslates off of Amazon, I wanted to know if I can go over them and recoat them with this just to make sure they are fully coated and the ink will take on it.

• 
  @atprintsАй бұрын

  Thanks for your question and I am sorry to hear you got bad products. I would recommend getting the substrates from other suppliers. I should have some other links in my description or let me know and I can send you some links to my suppliers. For the rock slate you will surely have to sand off of all the old sublimation ink and then paint and recoat with the polygloss.

• 
  @neisha06ifyАй бұрын

  @@atprints I ended up sending them back for a refund, but I m saying like once I purchase them before putting the ink on them can I recoat them just to make sure they are properly coated before trying to sublimate on them

• 
  @adarshsungkur4687Ай бұрын

  Did you ever got registration fail while trying to cut ?

• 
  @reign5426Ай бұрын

  Praise the LORD, this is exactly what I was looking for. Thanks Allan, your channel is really a blessing. I've watched a lot of your videos.

• 
  @atprintsАй бұрын

  Hey, thanks very much for your continuous support to this channel. Your words inspire and motivate to keep pushing with them. Thanks again.

• 
  @reign5426Ай бұрын

  @@atprints You are welcome ☺️

• 
  @jasongreen8092 ай бұрын

  Can you spray it on?

• 
  @atprints2 ай бұрын

  Yes, there are steps for spraying it on but most persons will not have a air compressor or paint gun so I am in the process of using another spray method and then I will release the video once everything works. Spraying can also cause bubbles so you have to be very careful.

• 
  @rodeltimmalog69642 ай бұрын

  Can you tell No we’re not if the shirts and design still good after first wash? thanks!

• 
  @atprints2 ай бұрын

  Thanks for your question. With the Dri-fit shirts when you sublimate the image onto the shirt the image stays on forever and the quality stays the same. Of course after constant wearing of the shirt, the shirt itself will start to wear and tear.

• 
  @Tubedailywatch2 ай бұрын

  Bro are you bajan ?

• 
  @atprints2 ай бұрын

  Yes I am

• 
  @chuckgurley40482 ай бұрын

  What program did you use in your program to begin with please

• 
  @atprints2 ай бұрын

  I used the Epson software from Epson. You can go on there website and get any software for the specific printer you have.

• 
  @suzanbarayan28772 ай бұрын

  Thank youuuu so much!!! You have no idea how long I’ve been struggling with this

• 
  @atprints2 ай бұрын

  You are most welcome. I am going to be doing an update video in the future as things do change and the years move along. Happy that the video helped you.

• 
  @elizabethvallely40442 ай бұрын

  Really enjoy your video as you explain it all in depth! Thank you so much for sharing it was awesome! Liz 😊

• 
  @atprints2 ай бұрын

  You are most welcome. I enjoy going in depth to give viewers a great understanding and to possibly answer all questions before they are asked. Happy this video helped you.

• 
  @ShirleyJackson-sf6wp2 ай бұрын

  Thanks so much, great video; thanks for step by step details. Question: I'm getting some haze on my finished product (using the polygloss) after heat pressing on 400f for 600 secsonds. Can you give me some advise please. TY!

• 
  @atprints2 ай бұрын

  Thanks for your question and sorry for the late respond. You can try reducing the temperature to 385F. Make sure that you tape down your design onto the tile so it wouldn’t move when you are pressing it and when it’s finish. You can send me a picture of it on my instagram or Facebook so I can see and I would be glad to assist more.

• 
  @ShirleyJackson-sf6wp2 ай бұрын

  @@atprints Thanks so mjuch, I will try! I am using ceramic tiles.

• 
  @kwandaslawson5582 ай бұрын

  Thank you so much for doing this demonstration, have you or do you know if the tile will fade if left in outside in summer weather temperatures?

• 
  @atprints2 ай бұрын

  Thanks for your question. With the polygloss tile I would recommend keeping it out of the sun. I do believe after a long time of exposure sun it will fade. As you would know the sun is even hotter now than before. In terms of the original sublimation tile I am not 100% sure.

• 
  @reginemerveillebimogo99122 ай бұрын

  Can we eat on the plate?

• 
  @atprintsАй бұрын

  Yes you can l, however, I normally say use it as an ornament.

• 
  @reginemerveillebimogo99122 ай бұрын

  I'm from Cameroon

• 
  @atprintsАй бұрын

  Nice to meet you and thanks for tuning into the channel.

• 
  @reginemerveillebimogo99122 ай бұрын

  I want all theses machines, how can i have it please?

• 
  @atprintsАй бұрын

  You can check the links in my description or you can send me a message on instagram @allan21thompson and I will forward you links etc.

• 
  @tonyrome0682 ай бұрын

  Use a sponge or sprayer for a smoother finish

• 
  @johannaj96142 ай бұрын

  The umbrella doesn't burn? What setting do you use?

• 
  @atprints2 ай бұрын

  Thanks for your question. I used 320F for 15 - 20 seconds with a medium pressure. No it didn’t and wouldn’t burn.

• 
  @tonyrome0683 ай бұрын

  Great job!

• 
  @atprints3 ай бұрын

  Thanks very much for your support.

• 
  @sarahcoelho46413 ай бұрын

  What tempature and how long do you press the vinyl for?

• 
  @atprints3 ай бұрын

  Thanks for your question. The temperature which can be used is 320F for 15-20 seconds with a medium pressure.

• 
  @jannajanna593 ай бұрын

  May i ask, does all glass dinnerware works?

• 
  @atprints3 ай бұрын

  You can use glass dinnerware however, it may be best to use oracal 651 vinyl or follow these videos where you can use polygloss kzread.info/dash/bejne/X2x_lbKcYri9pZs.htmlsi=TBnkaVgSO2vDvDOt or this video kzread.info/dash/bejne/lqKZvMelkpbbmps.htmlsi=e99JYdv-aDSzCPRl

• 
  @jannajanna593 ай бұрын

  Thankyou very much.

• 
  @LanceMcGrew3 ай бұрын

  So bottom line just throw the mistakes away and start with new? Seems like it costs more time and money than it is worth.

• 
  @LanceMcGrew3 ай бұрын

  Would a foam brush help remove the brush marks seen in your camera close-ups? Also, what do you use for brush clean-up or do you dispose after one use?

• 
  @atprints3 ай бұрын

  Thanks for your questions. If you are referring to the white lines after the image was pressed, this is actually because the wood isn’t fully flat so because of this when it was finished sublimated it produced those white lines. However, with the clear coating that would clean it up. To clean up your brush you can use water as it was mostly a water base paint or thinners. I hope this helps.

• 
  @ujuo23503 ай бұрын

  Hi, thank you very much for this wonderful video. Please can this be done on an MDF wood? If yes, how do you dry it because I am not sure about putting it in the oven for 20 mins like you did for the mug . Thank you

• 
  @atprints2 ай бұрын

  Thanks for your support and questions and I am so sorry for the late response. You don’t have to put the wood in an oven. Normally for wood you would need to use a heat press or allow it to dry on its own. Please take a look at this video where I used polygloss to sublimate on the wood. These steps can work kzread.info/dash/bejne/iYBo0LaafLTPoNo.htmlsi=GZz8wcUshIjC-Z2U

• 
  @melissal79843 ай бұрын

  Great video! Thanks for making it! Have you tried testing this in the dishwasher? How long does it last? Thank you again for showing us this technique.

• 
  @atprints2 ай бұрын

  Thanks for your question and I do apologize for the late response. So in this case these wouldn’t be dishwasher safe. I would recommend washing by hand. The reason why these wouldn’t be dishwasher safe is when to much heat from the dishwasher starts to apply on the jars it could reactivate the polygloss. So the safest way is to wash by hand. It will last very long. I have other polygloss projects I did over 4 years and they are still good up until today as I am sending this message. I hope this answer helps you.

• 
  @cherylwilliams51793 ай бұрын

  Awesome video, very easy to follow.❤

• 
  @atprints3 ай бұрын

  Thanks very much for your comment and support.

• 
  @alonagallego67053 ай бұрын

  Is it possible to adjust the size of registration marks?

• 
  @atprints3 ай бұрын

  Thanks for your question, I don't believe you can. However, the app was recently updated so this feature maybe active. I will have to check and follow up.

• 
  @Mie0mietheclown3 ай бұрын

  What company did you buy your cameo 4 pro? And what other equipment will I need to make this happen. I am using a chrome book.

• 
  @atprints3 ай бұрын

  Thanks for your question. I purchased my Cameo 4 Pro here 👉 shrsl.com/2upkf. However, in this video, I used my Cameo 4. You will also need a heat press and heat transfer vinyl.

• 
  @crkproductions50004 ай бұрын

  I wloukd lobe rj chst abjut a cusyim unbrealla.