We're vlogging about all the cool stuff we do here on the homestead! Chickens, gardening, cooking, crafts, machines, home repairs, we do a bit of everything!
Got this job knocked out today. Thanks for the great vid. 👏
@RedBarnHomestead4 сағат бұрын
I'm very glad it was helpful!
@ismaelcardenas47943 күн бұрын
Hi...I Have the Same Dryer...But Mine...Turns Everything On But It Doesn't Spin...What Can It Be...😢🤔.. Can U Plz Help Me🥺
@RedBarnHomestead4 сағат бұрын
Yep, I have a video on changing the tension-er and the belt...check that out.
@ismaelcardenas47942 сағат бұрын
@@RedBarnHomestead thx..
@jazminledesma-zs2kx3 күн бұрын
I can’t get the bobbin to catch the thread right and it jams 😢
@RedBarnHomestead3 күн бұрын
Seems something is not quite right.
@AndyBellPops3 күн бұрын
Who did you buy it from?
@RedBarnHomestead3 күн бұрын
Should be in the comments.
@JD-mo4fv3 күн бұрын
I'm interested as well as to where you got it. I didn't see it in the comments.
@MrTwinsrule4 күн бұрын
Greenworks was dropped from my local John Deere dealership. Now I know why . Piece of $#@$
@RedBarnHomestead3 күн бұрын
Not really. Mine is several years old and still running great.
@joeutofka42154 күн бұрын
ty for such an easy to follow video and being straight forward. i'm setting up my moms old 237 and this was beyond helpful! thank you.
@RedBarnHomestead3 күн бұрын
Very glad it was helpful!
@craftershaven5 күн бұрын
Sorry, but this video tells me nothing. What Pole goes into what Pole is what I need to know.
@RedBarnHomestead3 күн бұрын
Sorry, this a visual p representation of how it is assembled; but it will not assemble it for you,l.
@donnamadsen85188 күн бұрын
I got one for $35 from big W (Australia) it didn't have a tube from lid to soap...the nozzle didn't click on it just fell off with pressure..it came with some other little pick like but of plastic that I still don't know where that goes and it didn't soap up well and I used turtle wax soap for heavy duty cleaning...I ended up soaping the car then going over with a sponge and pressure wash off...I'm tucked off paying what I did but now I know there's nothing like elbow grease to clean the damn car 😆
@RedBarnHomestead3 күн бұрын
We typically use ours for washing 4H show sheep now.
@user-qf2og2gz3b9 күн бұрын
How to buy this model
@RedBarnHomestead9 күн бұрын
At this point likely eBay.
@teresaobrien932112 күн бұрын
Same issue but also the plastic suction at the bottom came apart I don't think it's supposed to... I'm referring to the front clear plastic piece that says Bissell 6 cleaning rows dirtlifter power brush has separated from the clear piece it appears it should snap into or was glued into....? Should it snap back in or is this actually cracked off?
@teresaobrien932112 күн бұрын
I tried to add a photo but idk what I'm doing wrong.
@RedBarnHomestead9 күн бұрын
It it doesn’t snap back, it maybe broken.
@carlbaker860613 күн бұрын
Thanks!
@RedBarnHomestead12 күн бұрын
You are welcome! Thanks for the tip!
@bobwitmer249213 күн бұрын
I was wrong it’s not Ethernet cabling. I’m not sure if 75ft is enough or if you need 150ft. It looks like the pole mount would work well.
@RedBarnHomestead12 күн бұрын
It would, but the wooden platform I made is 1 year and still going strong. No hail damage yet either.
@leaker515314 күн бұрын
How do u take the adapter off
@RedBarnHomestead13 күн бұрын
The nose part has a ring you pull back.
@donnamadsen85188 күн бұрын
Pull the black ring back and it comes off
@williambain14814 күн бұрын
My Freeman generator 7500 starts and runs for retreat of 4 seconds and then shuts down what is the problem
@RedBarnHomestead14 күн бұрын
Sounds like it’s starving for fuel.
@Utubekham15 күн бұрын
Une couverture COMPLETE d’installation … at last !, thank you !
@RedBarnHomestead14 күн бұрын
You bet! Glad it could help.
@mariferscearce16 күн бұрын
Thanks for your chanel. I have the same machine. Never tried using until now since my Singer broke.
@RedBarnHomestead14 күн бұрын
Always good to hear these older machines still running!
@DebBoomsma16 күн бұрын
This is awesome....going to order one right now ❤
@RedBarnHomestead13 күн бұрын
Yeah, they are totally worth the price.
@tonymassad16 күн бұрын
So helpful.. thank you
@RedBarnHomestead13 күн бұрын
Good to hear!
@jessicavarghese335618 күн бұрын
I’m building this grill now, but the side burner valve is missing. Not sure where I can get it, if you know?
@RedBarnHomestead13 күн бұрын
You would need to call the manufacturer to have them send you a new one.
@Your_local_furry99720 күн бұрын
Thank you for your time and to edit your video. It help me 100%. Thank you! Thank you!!
@RedBarnHomestead19 күн бұрын
It’s totally worth it if you can fix it yourself!
@psdaengr91121 күн бұрын
Thus is one reason why I got the version with a brushless motor
@RedBarnHomestead20 күн бұрын
Good idea but it’s not a hard fix.
@letsplayclassicgames502422 күн бұрын
If your bracket that supports the heating element has the two screws behind, ratchet wrench with Phillips socket works wonders! Great instructional video with clear steps to get it done. Your video made what I thought might be intimidating, a simple repair. Took me a little over an hour due to the two bolts and my red/blue clips on the heating element took a while to get off.
@RedBarnHomestead20 күн бұрын
Yeah, it seems those back screws vary from model to model.
@SmellyCat55523 күн бұрын
Dude! Thank you! I found this old box and it was just taped into pieces and i could only get the legs the rest i couldnt figure out properly and your video saved me. Thanks so much
@RedBarnHomestead20 күн бұрын
Awesome, happy to have helped!
@gibsonbrigh29 күн бұрын
There is two greese fittings just be for the sickle bar connects to frame.
@RedBarnHomestead27 күн бұрын
Yes, right in the snout of the unit.
@priteshpancholiАй бұрын
Thank you for putting the together - the instructions provided with the BBQ from Walmart get confusing towards the part when you have to screw in the valve. This video saved my sanity! Thanks again, will drop you a follow 🙏🏽👍🏼👍🏼
@RedBarnHomesteadАй бұрын
Thanks for following! Yeah, we try and do assembly and cool videos here.
@jsiqueblue4948Ай бұрын
Thank you so much, I lost the manual and I wasn't sure what the spacers were
@RedBarnHomesteadАй бұрын
Glad it helped!
@RifaOnGamingАй бұрын
thanks to mr elon 😁
@RedBarnHomesteadАй бұрын
Thanks to the engineers who figured it out.
@rage02kАй бұрын
Doesn't the side burner connection need to be more tight? Looks flimsy and I feel gas may leak. This is my first BBQ so not sure.
@RedBarnHomesteadАй бұрын
It mixes with air, so that is actually fine.
@AprilsRetardedChickenАй бұрын
OMG I looked at the manual and thought it could be the bail switch so I took that apart. Was like opening a can of worms. Now I don't know how to get that back together 😭
@ontarioyamonАй бұрын
Could you possibly do a video on threading with a twin needle? TIA.
@RedBarnHomesteadАй бұрын
We are hoping to get back to sewing machine videos soon.
@nintendyАй бұрын
Anyone who has a problem with the sound of a ticking Clock has a problem - and I don't mean with the Clock1 LOL 🙂
@RedBarnHomesteadАй бұрын
It’s all about how many ticking clocks you have, and how quiet your house is otherwise.
@damanpreetsingh7872Ай бұрын
This video was a great help. Thank you
@RedBarnHomesteadАй бұрын
You are welcome.
@k0almin3rАй бұрын
Lifesaver video for memorial day weekend and no instructions..awesome! Thanks!
@RedBarnHomesteadАй бұрын
Perfect!
@pkc456Ай бұрын
Thank you so much❤🌸
@RedBarnHomesteadАй бұрын
Cool.
@Sammy-vj6scАй бұрын
Hi RBH, The valve for the side burner, my grill has it firmly placed under the last burner of that side, and won't move at all. Any info how can I make it work so I can finish assembling the grill? Would you also know the company website for this grill?
@RedBarnHomesteadАй бұрын
Not sure, might be worth a google search.
@TankRАй бұрын
Dang..... Not gonna lie, its absolutely a viable solution. Personally I was hoping for a way of quieting an incremental movement (My personal preference is for a movement that moves the seconds hand on the half second, so two 'ticks' per second) perhaps by tightening up some tolerances or something. Oh well.... In this day and age of a slightly different face over effectively the same mass produced device (not just clocks, about 90% of all the things have a little 8, 12, or 16 pin microcontroller in them with the part number lasered off (they're most likely an atmel clone)) this is a shining example of 'just find something that does what you want and see if its bits can fit in those bits...' kind of engineering! Of course, thats part of why they laser the part number off the MCUs....so you cant repurpose their 3 cent controllers.....
@RedBarnHomesteadАй бұрын
Quite true. Most production clocks and almost all custom clocks are this way. Makes it hard to buy a clock for $50 when it has $1 internals.
@Adk_pendulum8888Ай бұрын
Do you by chance have a link for the replacement parts?
@RedBarnHomesteadАй бұрын
It’s usually best to search what you want and your model number for the most accurate results.
@dr.paulj.watson4582Ай бұрын
All the good people! We're here! 🎉
@RedBarnHomesteadАй бұрын
Nice!
@granarymousefurniturecompa9440Ай бұрын
Awesome video thanks 😊
@RedBarnHomesteadАй бұрын
Glad you liked it!
@noeltaylor3594Ай бұрын
I used an older version years ago. Bled my brakes fine.
@RedBarnHomesteadАй бұрын
Yup,your results may vary.
@TigerMetalStackАй бұрын
got it done but you failed to show the back screws on that support bracket but I got them out (didn't bother putting them back in due to location and the damned drum was in the way the whole time but now got to test it first
@RedBarnHomesteadАй бұрын
There will be variations from model to model.
@njital13Ай бұрын
Just purchased this grill . THANK YOU FOR THIS VIDEO !!!!! It helped a lot
@RedBarnHomesteadАй бұрын
Awesome, that’s good to hear!
@wclove76Ай бұрын
Thanks for the video. I appreciate the great detail. I was able to change the heating element in our dryer last night with ease.
@RedBarnHomesteadАй бұрын
That’s awesome to hear. Fixing stuff yourself is very rewarding.
@khinekhine613Ай бұрын
Is that brother comparable to Sears Kenmore from mid 60s? which one would you like more?
@RedBarnHomesteadАй бұрын
They can be, but it depends on the model as to who Sears contracted to make their sewing machine.
@sanchamillionАй бұрын
You saved me. Had the new lawn mower in the cart ready to buy and thought hmmm let me check KZread real quick. 🏆
@RedBarnHomesteadАй бұрын
Research is awesome. That being said, I love this mower. This video is a few years old and ours is still running today. I run it in discharge mode, which is no mulching plug, the rear door down.
@user-cc4xb1oi2jАй бұрын
Do you know where the serial number is?
@RedBarnHomesteadАй бұрын
Yikes...I do not, but it might be on a tag under it? Ours is currently deep in storage in the basement and hard to reach.
@user-cc4xb1oi2jАй бұрын
@@RedBarnHomestead I looked everywhere, no plate, or anything similar to other Singers that I have. Online couldn't help either. I entered several different numbers that I found on the machine but none made sense with a date.
@hidesertdave6166Ай бұрын
this was trash and it went to the trash can today
@RedBarnHomesteadАй бұрын
That sucks. We found it also sprays water based fertilizer very well.
@donnamadsen85188 күн бұрын
😂😂😂
@mandashuck5316Ай бұрын
Thank you so much for making this video. Just changed our heater element on our dryer!!!! 😁 Took us about 45 minutes to get it done. 🤗
@RedBarnHomesteadАй бұрын
That is fantastic! I love to hear folks are fixing their own stuff.
@Jojotheowl1Ай бұрын
Thank you so much for the informative video!
@RedBarnHomesteadАй бұрын
Thanks for watching! And learning how stuff works, its pretty important to know these things aren't magical.
@savannalawrence617Ай бұрын
I did this step by step and turned it on for a test run and it smells like something’s burning 😅
Пікірлер
Got this job knocked out today. Thanks for the great vid. 👏
I'm very glad it was helpful!
Hi...I Have the Same Dryer...But Mine...Turns Everything On But It Doesn't Spin...What Can It Be...😢🤔.. Can U Plz Help Me🥺
Yep, I have a video on changing the tension-er and the belt...check that out.
@@RedBarnHomestead thx..
I can’t get the bobbin to catch the thread right and it jams 😢
Seems something is not quite right.
Who did you buy it from?
Should be in the comments.
I'm interested as well as to where you got it. I didn't see it in the comments.
Greenworks was dropped from my local John Deere dealership. Now I know why . Piece of $#@$
Not really. Mine is several years old and still running great.
ty for such an easy to follow video and being straight forward. i'm setting up my moms old 237 and this was beyond helpful! thank you.
Very glad it was helpful!
Sorry, but this video tells me nothing. What Pole goes into what Pole is what I need to know.
Sorry, this a visual p representation of how it is assembled; but it will not assemble it for you,l.
I got one for $35 from big W (Australia) it didn't have a tube from lid to soap...the nozzle didn't click on it just fell off with pressure..it came with some other little pick like but of plastic that I still don't know where that goes and it didn't soap up well and I used turtle wax soap for heavy duty cleaning...I ended up soaping the car then going over with a sponge and pressure wash off...I'm tucked off paying what I did but now I know there's nothing like elbow grease to clean the damn car 😆
We typically use ours for washing 4H show sheep now.
How to buy this model
At this point likely eBay.
Same issue but also the plastic suction at the bottom came apart I don't think it's supposed to... I'm referring to the front clear plastic piece that says Bissell 6 cleaning rows dirtlifter power brush has separated from the clear piece it appears it should snap into or was glued into....? Should it snap back in or is this actually cracked off?
I tried to add a photo but idk what I'm doing wrong.
It it doesn’t snap back, it maybe broken.
Thanks!
You are welcome! Thanks for the tip!
I was wrong it’s not Ethernet cabling. I’m not sure if 75ft is enough or if you need 150ft. It looks like the pole mount would work well.
It would, but the wooden platform I made is 1 year and still going strong. No hail damage yet either.
How do u take the adapter off
The nose part has a ring you pull back.
Pull the black ring back and it comes off
My Freeman generator 7500 starts and runs for retreat of 4 seconds and then shuts down what is the problem
Sounds like it’s starving for fuel.
Une couverture COMPLETE d’installation … at last !, thank you !
You bet! Glad it could help.
Thanks for your chanel. I have the same machine. Never tried using until now since my Singer broke.
Always good to hear these older machines still running!
This is awesome....going to order one right now ❤
Yeah, they are totally worth the price.
So helpful.. thank you
Good to hear!
I’m building this grill now, but the side burner valve is missing. Not sure where I can get it, if you know?
You would need to call the manufacturer to have them send you a new one.
Thank you for your time and to edit your video. It help me 100%. Thank you! Thank you!!
It’s totally worth it if you can fix it yourself!
Thus is one reason why I got the version with a brushless motor
Good idea but it’s not a hard fix.
If your bracket that supports the heating element has the two screws behind, ratchet wrench with Phillips socket works wonders! Great instructional video with clear steps to get it done. Your video made what I thought might be intimidating, a simple repair. Took me a little over an hour due to the two bolts and my red/blue clips on the heating element took a while to get off.
Yeah, it seems those back screws vary from model to model.
Dude! Thank you! I found this old box and it was just taped into pieces and i could only get the legs the rest i couldnt figure out properly and your video saved me. Thanks so much
Awesome, happy to have helped!
There is two greese fittings just be for the sickle bar connects to frame.
Yes, right in the snout of the unit.
Thank you for putting the together - the instructions provided with the BBQ from Walmart get confusing towards the part when you have to screw in the valve. This video saved my sanity! Thanks again, will drop you a follow 🙏🏽👍🏼👍🏼
Thanks for following! Yeah, we try and do assembly and cool videos here.
Thank you so much, I lost the manual and I wasn't sure what the spacers were
Glad it helped!
thanks to mr elon 😁
Thanks to the engineers who figured it out.
Doesn't the side burner connection need to be more tight? Looks flimsy and I feel gas may leak. This is my first BBQ so not sure.
It mixes with air, so that is actually fine.
OMG I looked at the manual and thought it could be the bail switch so I took that apart. Was like opening a can of worms. Now I don't know how to get that back together 😭
Could you possibly do a video on threading with a twin needle? TIA.
We are hoping to get back to sewing machine videos soon.
Anyone who has a problem with the sound of a ticking Clock has a problem - and I don't mean with the Clock1 LOL 🙂
It’s all about how many ticking clocks you have, and how quiet your house is otherwise.
This video was a great help. Thank you
You are welcome.
Lifesaver video for memorial day weekend and no instructions..awesome! Thanks!
Perfect!
Thank you so much❤🌸
Cool.
Hi RBH, The valve for the side burner, my grill has it firmly placed under the last burner of that side, and won't move at all. Any info how can I make it work so I can finish assembling the grill? Would you also know the company website for this grill?
Not sure, might be worth a google search.
Dang..... Not gonna lie, its absolutely a viable solution. Personally I was hoping for a way of quieting an incremental movement (My personal preference is for a movement that moves the seconds hand on the half second, so two 'ticks' per second) perhaps by tightening up some tolerances or something. Oh well.... In this day and age of a slightly different face over effectively the same mass produced device (not just clocks, about 90% of all the things have a little 8, 12, or 16 pin microcontroller in them with the part number lasered off (they're most likely an atmel clone)) this is a shining example of 'just find something that does what you want and see if its bits can fit in those bits...' kind of engineering! Of course, thats part of why they laser the part number off the MCUs....so you cant repurpose their 3 cent controllers.....
Quite true. Most production clocks and almost all custom clocks are this way. Makes it hard to buy a clock for $50 when it has $1 internals.
Do you by chance have a link for the replacement parts?
It’s usually best to search what you want and your model number for the most accurate results.
All the good people! We're here! 🎉
Nice!
Awesome video thanks 😊
Glad you liked it!
I used an older version years ago. Bled my brakes fine.
Yup,your results may vary.
got it done but you failed to show the back screws on that support bracket but I got them out (didn't bother putting them back in due to location and the damned drum was in the way the whole time but now got to test it first
There will be variations from model to model.
Just purchased this grill . THANK YOU FOR THIS VIDEO !!!!! It helped a lot
Awesome, that’s good to hear!
Thanks for the video. I appreciate the great detail. I was able to change the heating element in our dryer last night with ease.
That’s awesome to hear. Fixing stuff yourself is very rewarding.
Is that brother comparable to Sears Kenmore from mid 60s? which one would you like more?
They can be, but it depends on the model as to who Sears contracted to make their sewing machine.
You saved me. Had the new lawn mower in the cart ready to buy and thought hmmm let me check KZread real quick. 🏆
Research is awesome. That being said, I love this mower. This video is a few years old and ours is still running today. I run it in discharge mode, which is no mulching plug, the rear door down.
Do you know where the serial number is?
Yikes...I do not, but it might be on a tag under it? Ours is currently deep in storage in the basement and hard to reach.
@@RedBarnHomestead I looked everywhere, no plate, or anything similar to other Singers that I have. Online couldn't help either. I entered several different numbers that I found on the machine but none made sense with a date.
this was trash and it went to the trash can today
That sucks. We found it also sprays water based fertilizer very well.
😂😂😂
Thank you so much for making this video. Just changed our heater element on our dryer!!!! 😁 Took us about 45 minutes to get it done. 🤗
That is fantastic! I love to hear folks are fixing their own stuff.
Thank you so much for the informative video!
Thanks for watching! And learning how stuff works, its pretty important to know these things aren't magical.
I did this step by step and turned it on for a test run and it smells like something’s burning 😅
It does that. It goes away.