Пікірлер

• 
  @duracelloptimum2 күн бұрын

  Hi mate how long did it take?

• 
  @mjsimo1Күн бұрын

  Thanks for watching, it took me about 4 weeks to complete.

• 
  @markdyballuk7 күн бұрын

  Hello Mark, hope all is going well in your new place. Did you get Building Control? Did you go for a council one or private? Many thanks

• 
  @mjsimo16 күн бұрын

  Hi, Thank you... it's a bloody nightmare lol🤣... biggest refurb I've ever done! Because I was selling that property you need a sign off cert from your local Building control, so that's what I done and it was fine no issues if you work with them.

• 
  @markdyballuk5 күн бұрын

  @@mjsimo1 thank you Mark, much obliged. one last question please, did you need to dig out the concrete where the door was to put in a foundation, were the services under there (gas/electricity) was it difficult to avoid them? Cheers

• 
  @kiwi235kiwi8 күн бұрын

  Wondering what was the reason you secured joists to wall, could you have just shimmed joists off the floor? Thanks!

• 
  @mjsimo18 күн бұрын

  It seemed to me the easiest way to level up the floor and I was also matching the height of the hallway to have one continuous same level floor. Your right wouldn't have been an issue off the concrete floor. Thanks for watching 👍

• 
  @tarak343913 күн бұрын

  You didnt need to dig the floor out for proper insulation, did you get building regs approval?

• 
  @mjsimo113 күн бұрын

  Hi, no because my floor was raised which allowed insulation and DPC on top. Yes fully inspected and signed off by local building control, thanks for watching.

• 
  @markdyballuk14 күн бұрын

  You're getting there Mark, good to see your progress.... I've heard a lot of good things about DIY kitchens, might use them next year

• 
  @mjsimo113 күн бұрын

  Thanks for watching 👍 DIY Kitchens are not too bad and third time we have used them, no complaints so far and really well made for the money.

• 
  @markdyballuk13 күн бұрын

  @@mjsimo1 thanks Mark, appreciate your recommendation mate 👍

• 
  @jablot505416 күн бұрын

  Did you need planning to change the door into a wall, as it changes the appearance? Nice job .

• 
  @mjsimo115 күн бұрын

  I did ask but planning was not required no, thank you for watching.

• 
  @paulkeen805723 күн бұрын

  Should of painted the wall and cut out the Skirting out. But great build 👍

• 
  @mjsimo122 күн бұрын

  Thanks for the tip.

• 
  @kiwi235kiwi26 күн бұрын

  Did your garage floor have a slope? If so how did you get the battens level?

• 
  @mjsimo126 күн бұрын

  No my garage floor was level. Battens? do you mean floor joists, I had a raised floor to match the rest of the house and I had a bout 10/12 inches of space to work with to level up the 5" joists I used, not battens. Thanks for watching.

• 
  @jordanblacow3139Ай бұрын

  Is the insulation you have used loft insulation, if it is, is it fine to use for walls. Does your room feel warm. Just about to start my garage and rockwool is a cheaper option than other materials at the moment Thanks

• 
  @mjsimo1Ай бұрын

  If costs are a factor like myself 100mm knauf roll insulation is fine to use in walls and roofs, building regs approved. Good luck with your build and thanks for watching 👍

• 
  @robb2869Ай бұрын

  Great video Mark, I've been looking for one of these but can't really justify spending £600 on a Dewalt or Makita (as much as I'd like to!) I've had Scheppach tools before and not had any problems so it looks like a no brainer to me, my next purchase I think! I hope you're still happy with it a few months on?

• 
  @mjsimo1Ай бұрын

  Thanks for watching and glad it helped out a bit. They hover around £300 mark, so not to bad a price. Like yourself I didn't want to spend too much, it's a great useful little machine, a tad on the noisy side so get some good ear defenders.

• 
  @tinman7743Ай бұрын

  You mentioned rollers on the top? What function do they serve?

• 
  @mjsimo1Ай бұрын

  When you're planning timber you pass the wood back over the top of the machine and rollers aid that process.

• 
  @JohnMcGuire-ko6sgАй бұрын

  fantastic job

• 
  @mjsimo1Ай бұрын

  Thank you! Cheers!

• 
  @harryacamАй бұрын

  Excellent 👍👍👍

• 
  @mjsimo1Ай бұрын

  Thank you! Cheers!

• 
  @edbrumby2891Ай бұрын

  i would have liked to see how the extraction hood fitted. see a few negative reports about the suction but of course they dont say what suction device they are using

• 
  @mjsimo1Ай бұрын

  Hi, thanks for watching. It's a plastic hood screwed to the rear with two thumb turns, easy on & off. Extraction wise I have one of these type www.screwfix.com/p/scheppach-dc100-215m-hr-electric-l-class-dust-extractor-230v/432xg it does the job for small jobs most of the time. But it can get full quickly if planning a lot of timber and if shaving are large yes rear outlet can get clogged, so I just leave it off and sweep mess up afterwards, use a good mask?

• 
  @Steven-jn2cwАй бұрын

  Hello, Would you still recommend this brushcutter?

• 
  @mjsimo1Ай бұрын

  Hi, yes cost wise for what it is, I like it and does the job well. It's a bit of a beast, it's my first petrol strimmer so can't really compare to others sorry. Thanks for watching 👍

• 
  @dylanjones12763 күн бұрын

  I have two of these machines one is about 5 years old still going strong and had a lot of hard work plastic's is cheap and fuel tank top if you don't put on properly it will leak fuel out and strimmers head cheap plastic so will brack avengely I put Oregon head on my one and great and only other thing had to change was fuel line when not in yeas empty tank of fuel and run machine to empty carb and it should start every time you need it and I run my machine fuel mix 25:1 but up to you

• 
  @Liam19911Ай бұрын

  I thought you was matching your house bricks not adding cladding ..😢

• 
  @mjsimo1Ай бұрын

  I wish, my brick laying skills are good enough 🤣

• 
  @jamienicheАй бұрын

  Could have just painted or rendered.

• 
  @mjsimo1Ай бұрын

  Your right might have been easier, didn't really think of it at the time.

• 
  @JamesTaylor2-cc9zh2 ай бұрын

  Non treated wood outside well done this is why if you dont know what you doing dont do it

• 
  @mjsimo12 ай бұрын

  Wood was all treated with a timber preserver, wood is not outside, vapour barrier used and was covered over. All signed off by local building control. What video did you watch?

• 
  @robertcrystals2 ай бұрын

  shouldn't the vapour barrier go under the floor joists and above the concrete?

• 
  @mjsimo12 ай бұрын

  Yes, your correct it does and there was a second DMP sheeting under the joist, to difficult to video that bit. It was all signed off by building control.

• 
  @robertcrystals2 ай бұрын

  @@mjsimo1 cool thanks. im doing a similar thing soon and i'm trying to make sure i'm doing it right

• 
  @4DXTProductions2 ай бұрын

  Hello do you still use this and would you recommend it now?

• 
  @mjsimo12 ай бұрын

  Yes, great little low cost machine. I use it at least twice a week. Downside is, it's a bit noisy.

• 
  @4DXTProductions2 ай бұрын

  @@mjsimo1 I believe all thickness planers are noisie. I've been looking at this one and one of the dewalt ones. Thank you for getting back to me.

• 
  @bigjumbo94792 ай бұрын

  I would have gone a little deeper....

• 
  @mjsimo12 ай бұрын

  Standard regs depth 800mm for water mains

• 
  @bigjumbo94792 ай бұрын

  I'll comment because you have none👍

• 
  @mjsimo12 ай бұрын

  Thank your so kind....

• 
  @peewanb2 ай бұрын

  Looking to do a similar thing, do you need to put DPM behind the insulating wool?

• 
  @mjsimo12 ай бұрын

  DPM would go on top of the insulation and under the plasterboard warm side for walls and under/behind for floors. Vapour barrier that allows airflow is best used behind if needed cold side on external walls. Damp or condensation flash point is created when the cold & heat meet. I mostly had internal walls, so not needed.

• 
  @simonharry10232 ай бұрын

  Where did you buy it

• 
  @mjsimo12 ай бұрын

  eBay a trader bought a batch of 10 from china

• 
  @davidandrews-scott8192 ай бұрын

  Totally bad will sweat. Well done with the fake wood lol.

• 
  @mjsimo12 ай бұрын

  Thank you for taking the time to comment. I'm not sure why you think it will sweat? your welcome to explain to us all the physics behind that theory, cladding is fitted with the suppliers recommended vapour barrier which I'm told has millions of tiny holes in the sheeting to allow air and keep out water. 60 plus years ago when built, behind plastic white cladding above that window, house builders used old plastic bags and it didn't cause any issues and not one bit of rot.

• 
  @thomasschafer72682 ай бұрын

  Um beim nächsten Mal alles richtig zu machen gehört die OSB Platte auf die Innenseite. Aussen tyvek Folie und die bauphysik ist gerettet. Nicht alles was Amerika vormacht ist auch richtig. Augen auf beim Schuppenbau!!👍🇩🇪

• 
  @mjsimo12 ай бұрын

  Thank you, but I only speak English.

• 
  @danielsimpson22732 ай бұрын

  Love it, keep up the good work

• 
  @mjsimo12 ай бұрын

  Thanks dude, your going sleep in it 🤣🤣

• 
  @riccardomarinoni67332 ай бұрын

  The handlebar is wrong mounting. But great video

• 
  @mjsimo12 ай бұрын

  Thanks, I realised afterwards 🤣

• 
  @Graec102 ай бұрын

  Very impressive 👍👌

• 
  @mjsimo12 ай бұрын

  Thanks a lot 😊

• 
  @VeronicaMezzettiDraia2 ай бұрын

  Hi thank you for this video, really helpful! (Also ignore the comments about the bad music, I am not sure those people know that there is a mute button they can use 😂). Could you please tell me what the name of the metal brackets that hold up the joists is? You use them right the the beginning on either side when prepping the floor. Thank you!

• 
  @VeronicaMezzettiDraia2 ай бұрын

  And sorry one more thing, what is the second membrane (lighter green) that you put down before the insulation called (8:00)?

• 
  @mjsimo12 ай бұрын

  Hi Veronica, thank you for saying😊 there seems to be no pleasing some people and it's hard than it looks editing video's, I have a lot of respect for KZreadrs that are good at it. Metal brackets are called, joist hangers and are very similar www.wickes.co.uk/Wickes-100mm-Galvanised-Light-Duty-Hanger---Pack-of-10/p/263711

• 
  @mjsimo12 ай бұрын

  It's called vapour barrier similar to this light gauge one www.screwfix.com/p/capital-valley-plastics-ltd-vapour-barrier-green-300ga-20m-x-2-5m/12869 it was used just to keep the insulation off the concrete floor.

• 
  @mrseudorastewart40922 ай бұрын

  Great job here mate this video helped me a lot! Thanks!!

• 
  @mjsimo12 ай бұрын

  Thank you, your very kind. If it just helps out one person it makes me very happy 👍

• 
  @alexlangheld2 ай бұрын

  Vapour barrier on the inside of the stud, breather membrane on the outside. That will sweat

• 
  @mjsimo12 ай бұрын

  60 plus years ago when built, they lined the old cladding above with used plastic bags? never caused any issues.

• 
  @seanwhite4052 ай бұрын

  That will sweat like a gypsy with a mortgage.

• 
  @djeamo51872 ай бұрын

  Pointless to do that. Time and money could have been spent on something better than that im sure. Though good job ive done that cladding a few times

• 
  @mjsimo12 ай бұрын

  It's fair comment, cheapest and easiest way to match in all the windows.

• 
  @josephcox2952 ай бұрын

  Looks worse, sorry

• 
  @mjsimo12 ай бұрын

  It's fair comment, the new buyer loved it...

• 
  @user-um2zf3pr5d2 ай бұрын

  Breathable membrane Plastic sheet will sweat the insulation and rot the timber GREAT😢

• 
  @mjsimo12 ай бұрын

  Thank you for your comment. It's hard to tell, but it is a breathable membrane with millions of tiny pin holes 😂

• 
  @gauseb2 ай бұрын

  Can you make another short showing how it looks with the rest of the house

• 
  @mjsimo12 ай бұрын

  Watch my full video and you will see what the full affect of the house looks like, cheers kzread.info/dash/bejne/hI15yM2xcra9lso.html

• 
  @jackleisure24712 ай бұрын

  You replaced a non-rotting material with something that will rot within years. You know how mad I would be if I knew you did that and I bought that house. I would be pissed.

• 
  @mjsimo12 ай бұрын

  Thank you for the comment, I guess the look worked cement boarding made to like timber will last 100 years 😂

• 
  @crazycrab85782 ай бұрын

  for the money, these are cheaper to get then a tent, and better, to live in,

• 
  @mjsimo12 ай бұрын

  Your not far wrong 🤣 the only down side is the big flappy section at the bottom.

• 
  @LenHarvey28053 ай бұрын

  Cracking work Mark. I really enjoy this style of video, short intro and then timelapse. So fun to watch.

• 
  @mjsimo13 ай бұрын

  Awesome, thank you! and kind of you to say cheers.

• 
  @EevaL.-em3eq3 ай бұрын

  As a woman, I bought one as well. I have so much old wood laying around I could make walls, art etc.❤

• 
  @mjsimo13 ай бұрын

  That is awesome! and really good to hear it's not only men that have interest in wood working. I would recommend getting a little handheld metal detector if your going to use old wood just in case of that hidden nail or screw.

• 
  @EevaL.-em3eq3 ай бұрын

  @@mjsimo1 good advice! Thank You. I will look for that small thing. There will be nails somewhere on the way for sure, extra pair of cutting blades are needed.

• 
  @markdyballuk3 ай бұрын

  great job Mark, when my workshop is built, hopefully this year, i'll move my gear out of the garage and do this to our garage... must be a Mark thing! perfect work and thanks for sharing

• 
  @mjsimo13 ай бұрын

  Excellent, good luck on your build, I'm sure it will be really good and look amazing. Thanks for sharing.

• 
  @peterdnreynolds7773 ай бұрын

  Can I ask what the size of your garden room is and what are you using for external and internal cladding please

• 
  @mjsimo13 ай бұрын

  Hi, the building is 7 meters long by 3.5 meters deep. Cladding is a combination of 11mm OSB for strength, house wrap and steel box profile sheet cladding www.cladco.co.uk/ externally, 12.5 plasterboard internally.

• 
  @markdyballuk3 ай бұрын

  congratulations Mark, serious wind to contend with! could you answer a couple of questions please? how big is the building and how many days did it take to get to this stage? many thanks for sharing and i'm looking forward to starting mine when i've cleared the groud.

• 
  @mjsimo13 ай бұрын

  Hi, thank you. The building it's self is 7 meters wide by 3.5 meters deep, if you add in the decking it's 5 meters and it's 3 meters at the highest point. It's taken about 10 weeks so far (4/5 days per week) working on your own and the weather is a big factor. Hope it helps, good luck with your build.

• 
  @markdyballuk3 ай бұрын

  @@mjsimo1 thanks Mark 👍

• 
  @Graec103 ай бұрын

  Well done! 👍👌

• 
  @mjsimo13 ай бұрын

  Thank you! Cheers!

• 
  @supertedm53 ай бұрын

  Great work and great video. Can I ask what pitch you have on the roof? I was going to go for metal but google is telling me 3/12 pitch. This put me off

• 
  @mjsimo13 ай бұрын

  Thank you and kind of you to say. I worked out my pitch is 10 degrees overall and minimum pitch required for box profile sheeting is 4 degrees. Suppliers www.cladco.co.uk/ have lots of useful info on there website to help.

• 
  @RC-oi1gg3 ай бұрын

  Did you need planning for this build or was it under PD?

• 
  @mjsimo13 ай бұрын

  Great question, I applied under permitted development yes, easy form to fill out form online.

• 
  @RC-oi1gg3 ай бұрын

  @@mjsimo1Thanks. Can I ask what was your permitted max build size given the distance from the boundary and materials used. I ask because I have a similar project to do myself.

• 
  @mjsimo12 ай бұрын

  @@RC-oi1gg If 2 meters away from boundary fence line, maximum height 3 meters from highest ground point and max 30 square meters floor area. My build is 25sqm, always the best advise is to check with your local council.

• 
  @johnneagle60723 ай бұрын

  Awesome job man, cracking on with that, I’ve just started building mine. Got the base done, but rain in Scotland has put me off a few days, I was thinking rubber for the roof, but what was your thinking of using the metal cladding?

• 
  @mjsimo13 ай бұрын

  Excellent and thank you. We have had a really bad year for wet weather and doesn't make it easy to build. I think a lot of my decisions are financial based lol. I did look into rubber roofing but it worked out more expensive, I also just like the idea of something well fixed down with big screws and it was very easy to install. Good luck with your build.

• 
  @joelprinciple75193 ай бұрын

  Thorough job, great stuff. Where are you based, are you in the London area?

• 
  @mjsimo13 ай бұрын

  Thank you and kind of you to take the time to comment. Lincolnshire area.

• 
  @markdyballuk3 ай бұрын

  Hi Mark, thanks for sharing, really great job to accomplish this on your own, very impressive indeed. just a point... i always thought roofing panels should be fixed through the peaks rather than the valleys, can you advise please? the metal roofing looks really good, was thinking about using rubber but the sheets could be a good way to go.

• 
  @mjsimo13 ай бұрын

  Hi, thanks for watching. Your not wrong in thinking that way as I always believed that when working with corrugated sheeting you fix on the peaks. Check out the suppliers www.cladco.co.uk/ fitting info for this type of box roofing you fix in the valley with self sealing screws. I did think about fitting the rubber type roofing.

• 
  @markdyballuk3 ай бұрын

  @@mjsimo1 Thanks for your reply Mark, i'm glad i didn't upset you in being (potentially) negative, it wasn't meant to be. i made the mistake of fitting some plastic roofing once in the valley so always assumed you had to fit roofing at the peaks, glad i was wrong in my point. you're doing a great job of the build looking forward to seeing more. all my best