Пікірлер

• 
  @tbpmermaid8 минут бұрын

  Thank you. I couldn’t have loaded it without you.

• 
  @dannyp268417 күн бұрын

  This doesn’t make sense to me. So you are putting it against a straight board you cut. So why would you just put on the fence which is also straight???

• 
  @bradleyhorton494919 күн бұрын

  Yep...not intuitive and it has to set in just right. You'd think there would be directions on the package...nope.

• 
  @richardwhite350619 күн бұрын

  Thanks

• 
  @TheKali4niagurlАй бұрын

  I got the blade thing, I just don’t know how to fold the darn thing up! 😠 I figured it out! I have to push the serrated bar that’s in the handle towards the side and then fold the gray (blade holder) down into place. 😅

• 
  @LeonardokiteАй бұрын

  Great idea to have storage in the back and firewood in the front. Exactly what I need to do. Thanks much. 👍👍👍👍👍

• 
  @markdyballukАй бұрын

  lovely job, great work, thanks for sharing

• 
  @crisco-crispy8509Ай бұрын

  Yes, it’s a bad design and frustrating to change

• 
  @MehdiJalayerАй бұрын

  Thanks for sharing this. Any reason why you went through the trouble of aligning the top and bottom sheets? I think you just needed to have the bottom sheet against the fence and the top sheet could really be anywhere and didn’t have to be flush with the bottom sheet.

• 
  @ZacharythorsenАй бұрын

  Jesus Christ died for all of our sins. He died the death we all deserved. He was the perfect one who never sinned once, but he loved us so much he decided to die for us so our sins would be paid for and we can enter the Kingdom of Heaven before God the Father blamelessly. He is the living son of God who wants to know us and have a personal relationship with us. No matter what you have done no matter how far gone you think you are Jesus can and will save you. All you have to do is confess with your mouth and believe in your heart that Jesus Christ is your Lord and Savior. Believe that he died on the cross for your sins and had a bodily resurrection 3 days later. We cannot be saved by our works but by faith in Christ alone. Repent and turn to Christ. You will have joy, happiness, love, and peace beyond understanding.

• 
  @laurennovotny63882 ай бұрын

  Do you have plans for this?

• 
  @gillvardy12352 ай бұрын

  Do you have the file in PDF format ?

• 
  @bridiecormican93523 ай бұрын

  Great idea Bert being able to remove back of storage shed during summer to allow maximum flow of air through the timber. I enjoy your videos.

• 
  @user-de8kx3rn6m3 ай бұрын

  Did you use monocoat pure on the walnut wood?

• 
  @lorahietala35323 ай бұрын

  I really like this idea

• 
  @sammylpt90763 ай бұрын

  Would this sort of shed be suitable to dry wood also? I’m thinking of setting up a small business to sell wood as we have quite a lot but we don’t have anything yet that can be used to dry the wood we fell.

• 
  @SawdustandStuff3 ай бұрын

  the purpose for the gaps in the siding and also the top opening is to allow airflow. I don't see why this wouldn't dry the wood.

• 
  @gerritgeldenhuys27633 ай бұрын

  I got my Nova 51 2 days ago and the extraction fan is driving me up the wall. It hits 96 dB. Extremely loud. Is yours the same ?

• 
  @SawdustandStuff3 ай бұрын

  no. It's not quiet, but I can easilly talk over it.

• 
  @JimmyKoKo23 ай бұрын

  I have subscribed.

• 
  @JimmyKoKo23 ай бұрын

  Thank you for sharing your knowledge and experience with the Thunder Laser 51/100. I just bought one last week. It also looks like you have a Onefinity next to the laser? I have the Elite Foreman on order as well. I have a lot to learn for sure. Where do you buy your hats? JDS? I see lots of people buying the Richardson. Both hats and leatherette. Again thank you. Any advice you can give me will be greatly appreciated.

• 
  @SawdustandStuff3 ай бұрын

  sure thing. I source hats on SSActivewear.com. I use richardson unless otherwise requested! Adhesive/leatheretter I use is Hydbond.

• 
  @moduc9963 ай бұрын

  Thanks for the vid. Just purchased it and was struggling with inserting the blade.

• 
  @mundlkalli43964 ай бұрын

  AWESOME THANK YOU VERY MUCH>>>>>>>new subscription

• 
  @margaritapadilla68594 ай бұрын

  So you have to buy hook and loop or is it under the one mine came with it plastics

• 
  @pgrosebud20124 ай бұрын

  Congratulations on the new tool. Good thinking on how to get it off the pallet and on the ground. I would have added another board under the "ramp" boards. but otherwise good move.

• 
  @SawdustandStuff3 ай бұрын

  yeaaaaah, should have dont that haha!

• 
  @waterlilly62lori4 ай бұрын

  No sound!??😮

• 
  @vicg53234 ай бұрын

  Very cool but dangerous to insert blade and no instruction include. Thanks for video. It helped me to get blade in with needle pliers.

• 
  @alishapadilla78465 ай бұрын

  Do you have to make sure the sand is dry ?

• 
  @glassandmirrorshoppe5 ай бұрын

  Holy cow!!!! This darn tool is horrible to change!!!!! Thanks for your video, helped lots to prepare us for the challenge of dealing with blade removing and installing. Not who was the inventor, but they got this wrong. Also I 100% agree as to the danger of how the blade is inserted… Dangerous 😮

• 
  @ASTHECROWFLIESHIKING5 ай бұрын

  I have been looking for something like this is exactly what I need. Thanks for sharing this. I’m definitely going to try to build this . New follower here. Crow✌️

• 
  @charminglad1246 ай бұрын

  The jig can only do a maximum size of the base of your jig, any idea's that does not mean I have to have several jigs?.. ty in advance

• 
  @jasonelliott20556 ай бұрын

  I'm gonna build a few sets. Great idea!

• 
  @jasonelliott20556 ай бұрын

  Very nice

• 
  @jasonelliott20556 ай бұрын

  That's kinda cool and nasty at the same time. I like it.

• 
  @ghaeska6 ай бұрын

  Nice video Ryan!

• 
  @PATCsawyer6 ай бұрын

  None of that wood is in contact with the ground. Why so much PT?

• 
  @atjbruce016 ай бұрын

  PT?

• 
  @PATCsawyer6 ай бұрын

  Pressure Treated

• 
  @marvinjohnson81236 ай бұрын

  Yeah, full cord is 4feet by 4 feet by 8 feet. I don’t see it. Nice shed regardless of how much wood it holds.

• 
  @frozenwalkway6 ай бұрын

  to extend not having to replace the pad i super glue a pad saver on to it and ad annother padsaver lmao

• 
  @rosaliocardona40027 ай бұрын

  Thanks man my wife and almost through it over the fence

• 
  @dr.s.robinson56847 ай бұрын

  This video was very helpful!!!!!!!

• 
  @ByDesign3337 ай бұрын

  Mine is similar...just as stupid tòo.

• 
  @nathanbuschmann10717 ай бұрын

  What is the slope of the roof?

• 
  @MrLeram127 ай бұрын

  Where did you find that neat push stick?

• 
  @DjSerolmp7 ай бұрын

  Hiw much did you pay for the slab?

• 
  @nshicks7 ай бұрын

  Thanks for the video. I think my knife is an early version. Anyway, there's no way I could have done this without your video. Very poor design. And it came with no instructions.

• 
  @kleptosepto18487 ай бұрын

  this looks more like 3 FACE cords. Not 3 FULL cords

• 
  @venom58097 ай бұрын

  LMAO just got one on clearance at Lowe's and had to come to KZread to figure it out. My Fiskars one is so much easier to use. That being said it's pretty cool now I have it figured out. I have to say, this is a very dangerous process learning how to use this knife.

• 
  @GerardTonti8 ай бұрын

  Can’t even figure out how to close the damn thing. Returning!

• 
  @ghaeska8 ай бұрын

  Nice work Ryan!

• 
  @SawdustandStuff8 ай бұрын

  Thank you! Congrats on the big life update btw 🎉

• 
  @dmbloomq8 ай бұрын

  Nice machine. Seems really straightforward to get set up.

• 
  @SawdustandStuff8 ай бұрын

  It really is. Super smooth and user friendly!

• 
  @highpointpromotions54408 ай бұрын

  Is all that with a cnc

• 
  @tomcosta478 ай бұрын

  How much is a c n c machine