What’s this sub look like compared to a Zv6 size wise?
@SlamryCamry194 күн бұрын
@@FatMat916 there coming bro I had a hiccup last weekend the LOC I was running blew and literally took the AAK 6k and my LF Audio HPVM with it and fried the wires throughout the car from a set of T-tap connectors that the original install shop used over 2 years ago it's my fault for not redoing the wiring to the LOC after 2 years so I'm chalking it up to inexperience but I have it bumping on a brand new CAB-45 V2 I'm having to redo everything just to make sure I don't get a short again but I still have the AAK 180.4 to go on the doors and the AAK 6k and LF Audio volt meter are being sent off and will be back in the system soon
@MrMan-ol4ic6 күн бұрын
Im actually thinking about going with 4 12's or 4 15's from Incriminater line. It's either this line or audio Ace. Haven't decided yet. Going in my semi!
@SlamryCamry196 күн бұрын
I would definitely go with Incriminator audio over audio ace if you're going to do it might as well go with the top notch brand and quality I have come to find out you get what you pay for and Incriminator audio is in my opinion the best out right now
@MrMan-ol4ic6 күн бұрын
@@SlamryCamry19 Awesome, I appreciate the honesty brother. Thank you.
@SlamryCamry196 күн бұрын
@@MrMan-ol4ic if you have the cash I have to say I am thoroughly impressed with the Tyrant I've only put an 1800.1 on it so far and it was twice as loud as my two kicker Q-class L7 12's the cab-45 will be here tomorrow to hold me over until the AAK 6k is fixed
@dallasmckay14557 күн бұрын
Newb?!? 😳 Yea right. Looks like you're a lowkey expert haha My first build looked like SHYT compared to this. I had no heatwrap, wires were everywhere, and i literally grounded my amp to a random spot in the trunk which was at severe risk of rain damage haha 😂 Looks great bruh 💪🏿😎
@SlamryCamry196 күн бұрын
I promise I am new to this bro I literally just started the actual build about 2 months ago before that it took me a year to figure out the power supply and get it to 15.8 I'm trying my best to get it together I blew my brand new Deafbonce AAK 6k Sunday morning from inexperience and had to order a new CAB45-V2 it's supposed to be here today so I can get bumping until I can get the AAK fixed
@devionstanfield5077 күн бұрын
Make sure rca cables are in the correct spot on the radio
@audiodad74007 күн бұрын
I like it! Cover it with carpet! Good job.
@SlamryCamry197 күн бұрын
I'm going to most definitely to give it a better look just waiting to get everything installed before putting everything back together and making it look pretty
@eugeneirons79078 күн бұрын
Man that is a beast , nice woofer
@SlamryCamry198 күн бұрын
Thanks bro I'm trying my best to get it playing my LOC had a short and blew and I'm pretty sure it took the AAK 6k with it really disheartening to say the least and two weeks before I was going to make my first EVER show (XS power show in Knoxville) trying my best to get a new amp now
@eugeneirons79078 күн бұрын
@@SlamryCamry19 It will come on time Bro 😎 just stay positive
@SlamryCamry198 күн бұрын
@@eugeneirons7907 I'm trying I just went through the process of checking everything on both amps and they are definitely blown the kicker amp came on and as soon as I touched the positive and negative with the multi meter it went straight into protect and won't come out now and it shouldn't have done that I was just checking the AC voltage I really need someone in the middle TN area to help me BAD I'm completely clueless as to what caused all of this everything was playing fine and then nothing and now trying to check everything out I've blown my backup I don't know what to do I'm scared to even buy another amp
@eugeneirons79078 күн бұрын
@@SlamryCamry19 there is a great guy in your area , Chris at Crazy Hobbies on KZread and Slim Reaper both are in your area
@rmcarter799 күн бұрын
Try moving the RCAs from the power wire. Is your amplifier turned down.
@SlamryCamry199 күн бұрын
I tried swapping the RCA's, moving them etc I even swapped out the amp and it only does it with that amp 😞 the LOC had a short and blew and it possibly blew the amp to it didn't do that before and caused the amp to go into a thermal protection now it only does that I fear the worst but when I swap the amp I still don't get any sub output BUT I did try that amp on the bad LOC before I realized it had blown and it threw it in and out of protection so I think it blew it to BUT I don't know enough about it to tell I have checked the sub several times with the old 9 volt battery trick and the sub is good as far as I know I'm truly stumped on this one
@rmcarter799 күн бұрын
@@SlamryCamry19 🙆🏿♂️ man 🤦🏿♂️ hopefully you can get it all worked out 🤞🏿
@SlamryCamry199 күн бұрын
@@rmcarter79 the last thing I know to try is a new amp and Sub probably going to get a budget brand like the slapz 5k and 15 and see if they work if that doesn't work I'm going to tear everything out and redo the entire car
@FrankStPeter9 күн бұрын
Yeah I don't think you need any help if any critique would be overkill lots of it
@c0uchsl0uch10 күн бұрын
How important is the material the wire ferrules are made of? Plain copper, copper tinned, silver plated copper, on and on ?
@SlamryCamry1910 күн бұрын
I'm no expert but to my understanding the tinned or silver plated are to prevent corrosion but give more resistance (fractional amount) then the copper but there is a difference nonetheless I myself use tinned OFC ferrules I don't think it's enough resistance to matter unless you start talking about brass or aluminum compared to copper
@tedtan644911 күн бұрын
Neat... This is how it should be.
@Zachecker11 күн бұрын
look man your set up is impressive i can tell you have been working on this! that dyno mat will help with higher DB good job
@Zachecker11 күн бұрын
great brand
@SlamryCamry1911 күн бұрын
Yeah I had it working for about 10 minutes and pulled out of my driveway and made it a 1/4 mile and it just stopped playing I've checked the sub, amps and all other electronics and everything is fine really upsetting to say the least I'm literally in the driveway right now trying to find out what the issue is I'm told if my amp has power and was playing and cut out during the drive that it's more than likely a loose connection breaking the circuit but I don't know
@Zachecker11 күн бұрын
@@SlamryCamry19 check fuses
@Zachecker11 күн бұрын
often times when my set up did not play it was a broken/loose/burnt fuse
@SlamryCamry1911 күн бұрын
@@Zachecker I have identified the problem after almost 12 hours of searching the original t tap connectors that the install shop used to give signal to my LOC are faulty and cutting in and out I can literally touch them while music is playing and the sub starts pounding I'll have it fixed in the morning
@Zachecker11 күн бұрын
@@SlamryCamry19 ay at least you figured it out though 💪
@Zachecker11 күн бұрын
ay lets go man! great vid!
@jeffersondelira270612 күн бұрын
Keep up the good work man 💪
@SlamryCamry1911 күн бұрын
Will do more videos coming soon
@PShizzzle14 күн бұрын
Incriminator had this bad boy at their booth last month at triple fest and you’re right. Videos does not do any justice! 🫡🔥
@SlamryCamry1914 күн бұрын
Yeah I saw a video Mrchocolate posted showing it at the booth it's going in soon bro I just got the enclosure mounted to the platform this morning and all the wires run to the back going to cut a piece of MDF and screw it to the floor of the trunk and make a big amp rack with everything laid out should be posting flex videos this weekend going to work on it every morning before work this week
@1ohmwrecker15 күн бұрын
For being new to car audio, that looks great man!
@SlamryCamry1914 күн бұрын
Thanks bro I'm trying I've run into dead ends all weekend the enclosure won't fit in the trunk so I had to build a platform for it to sit on where the rear seat goes and I can't get it to lay down right lol it's in the car but standing up sideways with the sub facing the driver and the port facing the roof lol it's been a major headache doing it by myself my ol lady weighs 100 pounds soaking wet she can't lift anything to help me maybe I will have it together before next weekend
@1ohmwrecker14 күн бұрын
@SlamryCamry19 I feel it. Luckily I got a crane here at the shop I work at. Each one of my subs is 70lbs each so lifting a box w em is ROUGH! I actually am waiting for pre-order of the basshead garage watt meter too lol. I see u like all the nerdy details like I do 🤣 I got a sparked innovations conductor also that shows amperage pull. I just bought that sparked innovations fuse box too. Got it half price for like $45.
@1ohmwrecker14 күн бұрын
@SlamryCamry19 and when u order a box, it's best to make a mock up cardboard one to see if it'd fit. That's what I had to do when I ordered mine. Kinda alot of work but paying $750 for a box, you wanna get that right lol.
@SlamryCamry1914 күн бұрын
@@1ohmwrecker yeah I have both of them the 12 fuse and the 4 channel relay I haven't hooked up the 12 fuse yet but I have so much to do I usually don't wake up until 10 because I work 2nd shift but the XS power show is literally like 2 weeks away so I have to get it done I have to get the box anchored this morning before work and then TRY to get the sub installed I don't have the conductor YET but it's coming along with the NELO MEDIA Subwoofer temperature monitoring system and LF Audio wireless volume controller pro I just decided to stop ordering stuff for a little while because I have so many boxes in my spare bedroom that still needs to be installed
@1ohmwrecker14 күн бұрын
@SlamryCamry19 yeah I haven't used the fuse box yet either. I just got a dual amp rack, a smart bass 8k (boss black model) and a bunch of other stuff. I'm doing a lil upgrading. Deff want some more power on tap. Those sundown Xv3 12's just laugh at the smart bass 5k lol.
@adamcobb424815 күн бұрын
What a Beast! I may have missed it, is someone building your box?
@adamcobb424815 күн бұрын
I guess I should have watched all the video about your box, sorry. Hopefully you get it to fit.
@SlamryCamry1915 күн бұрын
It's going in there bro I just have a bump in the road it won't fit in the trunk but will fit perfectly right where the rear seat goes and be louder inside the cabin
@adamcobb424815 күн бұрын
If you have a soldering iron, solder your wires to speaker versus using crimp connectors. better connection and you don't have to worry about it coming loose. Shits gonna be loud brother!
@adamcobb424815 күн бұрын
Shouldn't get too hot of the AC line, relay is the way to go, only concern I would have is make sure that fan can vibrate from driving and get into your pulley or belt, other than that your dialed. If you could actually flip it over and get a couple short self tapping screws into the fender well to mount the fan to make sure it doesn't move that is what I would do. Or drill a couple small holes in the shroud so you could run a zip to another hose to keep it more stationary.
@adamcobb424815 күн бұрын
looks good, very nice equipment doing it right the first time. I was out of the game for years just like you and got back in installing stuff in my kids vehicles getting bigger and bigger. only thing I would say if you haven't done it yet brother is get some Sundown Audio 160mil vibraflex deadener, stuff is legit!
@SlamryCamry1915 күн бұрын
Yeah I'm having some issues I received the D4S HD3 single 15 enclosure and sub Friday and they won't fit in the trunk LoL so I am having to redo everything I tore my entire car apart yesterday it was bare inside except for the two front seats I'm going to have to build a platform for the enclosure to sit on where the rear seat goes I've been up half the night trying to figure it out going to Lowe's in a little while to get materials probably going to need help with it look for a new video later I will be posting one asking for help and ideas to make it work properly but I plan on redoing the deadening material with something stronger at least 160 mil if not MDF
@JasonWW200018 күн бұрын
You've got two of the Kicker Q class square subs that are dual 4 ohm? (41L7124) Looking at the TS specs it shows the Re to be about 3 ohm per coil. That's a little lower than normal for a nominal 4 ohm coil, but shouldn't be an issue. The main thing is that all four coils should read very close to each other. What is the other sub reading? Different? You should be able to wire both subs to either a 1 or 4 ohm nominal load. On a DC meter just before the amp it should read about 0.75 ohm or 3 ohm. Once the AC current is flowing the impedance will rise. That amplifier should easily be able to handle a 3 to 4 ohm load. You say the thermal protect light came on? Was the amplifier extremely hot from playing?
@JasonWW200018 күн бұрын
It's possible that one of the coils is damaged and is shorting out at some point in the travel. If it's like an intermittent short the amp might protect, but it shouldn't be thermal related. You might try wiring up one sub at a time and playing it, but not too loudly and see if one sub plays fine, but the other causes the amp to go into protect. Also, inspect all the wiring that you can see. Check that the terminals are tight and the speaker wires are not touching the frame. Look over the tinsel leads for any burning or other issues. Gently push or pull on the cones to listen for any scraping.
@SlamryCamry1918 күн бұрын
Yes they are dual 4 ohm and after taking the box and everything out and removing the subs come to find out the original spade connectors the install shop used had worn out and the ground came disconnected during playing and instantly threw the amp into protect that will NEVER happen again I won't use anything that doesn't have a push terminal or ring terminals but the new enclosure came in this morning the D4S HD3 single 15 enclosure with the triple baffle and double sided all the rest it's a good heavy duty box for the Tyrant and it has good strong ring terminals and I have 4 gauge OFC sky high power and ground for the SPEAKER wire LoL that should do it but the box wouldn't fit in the trunk or at least through the opening sooo I'm going to take the trunk apart this weekend and try again if not I will be building a platform/floor lvl with the trunk up to the rear seat and use the prefab until I can make my first show and meet some people to teach me how to Properly build a wall/4th or 6th in the rear seat area
@JasonWW200018 күн бұрын
@@SlamryCamry19 Glad you got it sorted. 👍
@CrystalClearSQL18 күн бұрын
I dig it. She'll be screamin no doubt.
@SlamryCamry1918 күн бұрын
Thanks bro I can't wait for the Tyrant to get here I hear it's a monster
@CrystalClearSQL18 күн бұрын
Goodness that's some beautiful equipment. Very nice setup... Can't wait to hear it once it's bangin. What's going on the 4 channel, front stage?
@SlamryCamry1917 күн бұрын
D4S 6x9 and 6x5
@MoToArchY18 күн бұрын
Keep going bro! 🫡💪🏼💯
@SlamryCamry1918 күн бұрын
It's coming together got the enclosure in today it's too big for the trunk LoL 😆 I guess I will have to make a platform in the rear seat area or cut the rear deck out it's going in there
@MoToArchY18 күн бұрын
@@SlamryCamry19By ANY means Necessary 🤷🏻♂️🤣! I just got done wiring my 4channel, sub and amp already done! Just waiting for it to cool down here, it’s like 92 🔥 and I don’t have a garage, and I need to sound deaden my whole SUV! 🥵🤦🏻♂️
@LoveMyStateFLA18 күн бұрын
Well done, sir. I see that you already have rubber spacers under your amplifier… I'd suggest that you add one or two more rubber spacers to allow more airflow underneath the amplifier. Other than that, you're golden!
@SlamryCamry1918 күн бұрын
Actually I'm thinking about ordering a dual Amp rack so I can stack the AAK 6k and AAK 180.4 on top of each other to save some room I will know more when everything comes in and I can see it laid out but I'm on it bro probably going to get another fan for the amps as well
@tedtan644911 күн бұрын
Wow. You just gave me an idea. Thanks.
@1904audio18 күн бұрын
I love those 6ks
@SlamryCamry1918 күн бұрын
I've heard really good things about them and it's a Korean board I wanted to get something of good quality for my first high powered setup so it hopefully lasts awhile my D4S Single 15 Enclosure is supposed to be here this morning and the sub shouldn't be too far behind and we will see what it can do I'm stoked to see it in action I got to hear a salt 4k on a single ZV6 12 Monday and it was moving quite a bit of air for a single 12 I'm hoping to see better results from this setup
@rmcarter7918 күн бұрын
Getting it done ain't you 😁 anxious to see how they sound but they look great though 😉
@SlamryCamry1918 күн бұрын
I can't wait bro I've been up since 5AM waiting for the Enclosure to arrive I'm really excited about this build I've never heard anything bigger than a 4k and I just heard that Monday a salt 4k on a ZV6 12 and it was super impressive for a single 12 I'm hoping to see better results from the 15 and the 6k
@rmcarter7918 күн бұрын
I think you will 🔊🔊👍🏿
@SoberBassHead19 күн бұрын
Looks great man
@SlamryCamry1919 күн бұрын
Thank you kind sir I appreciate it I will be posting more videos of the build this weekend with a few unboxing videos
@audiokonnections19 күн бұрын
Looks good man that fan will work fine like that
@SlamryCamry1919 күн бұрын
Thank you for checking it out I'm nervous I'm going to mess something up I've already had a few close calls but I'm trying my best
@audiokonnections19 күн бұрын
Don't be nervous just go for it!! The hard work will pay off I promise
@bigdezielsPlayHouse21 күн бұрын
One of your voice coils is starting to 5:58 fall that's why your amplifier is going into protection. I would try the good subwoofer in a custom enclosure.
@SlamryCamry1920 күн бұрын
Already on the way bro I'm waiting for a 15" Incriminator audio TYRANT rated for 5K RMS to put on my AAK 6k and I have 4 gauge speaker wire for it so there's no mistakes next time I also ordered a new head unit, DSP, four channel AAK 180.4 , D4S 6x9 and 6x5 door speakers all kinds of stuff to install this next weekend before the sub arrives I also have a D4S HD3 single 15 enclosure that will be here tomorrow I'm going to do an unboxing on it and the sub because I haven't seen anything on either item on here stay tuned coming this weekend and whenever the Sub arrives which shouldn't be long now it's been over a month since I ordered it with a 20-25 business days build time I'll be hooking everything up and tuning with the DD-1 and CC-1 should be able to give a demo of the doors this weekend
@PShizzzle23 күн бұрын
Everything looks good bro! Just gotta get u out to some shows! 😅
@SlamryCamry1923 күн бұрын
Oh bro I am on the way I just got tracking info for the enclosure FINALLY!! It's on the way and it's been 26 business days yesterday for the sub so it should ship next week I think I might be able to make the XS power show after all I'll be posting some more videos tomorrow got a bunch of stuff in this week and God willing I make the XS power show I will get as much footage as possible I can't wait
@rmcarter7923 күн бұрын
I think you will be okay with the fan being right there 👍🏿 The only thing I saw was from the last video I would try to put spacers under the 6K so that the fan can also blow underneath it 👌🏿
@SlamryCamry1923 күн бұрын
Yes I have some little grommet under there but they are not doing much when I get paid next week I'm going to order a dual amp rack and stack the two AAK's on top of each other
@rmcarter7923 күн бұрын
Man ... Looks good 👌🏿
@oscardardenjr347328 күн бұрын
Hate to get off topic but PLEASE need some help where did you get the belt from to run your H.O. Alternator tried parts stores but no help Thanks in advance also just subscribe so keep posting
@SlamryCamry1928 күн бұрын
I understand the frustration of this all to well I actually went to every parts store in town and looked online and every single place I tried gave me a different belt size I eventually just waited until I had a full two day weekend off work and went out and took the belt and alternator off and measured it and took it to O'Reilly's and the lady behind the counter was able to read a faint number and come to find out the only people that make a belt for the car is Toyota and has to be bought at a dealership but they don't make any other size except the stock so I had to get the stock size and guess it almost 3/4 of an inch shorter I still have the box that my belt came in with the part number on it in case I ever needed another I will look after I get off work and send it to you
@SlamryCamry1927 күн бұрын
Ok I have the box I'm assuming you have the same vehicle as me and if so the belt I got came from NAPA auto parts and the part # 060448 and the belt size is 45-3/8" inches I hope it helps it works perfectly for me no charging issues or slipping reading 15.8 on the dash
@TruthHz261Ай бұрын
Nice start man...should sound real good when you're done
@SlamryCamry19Ай бұрын
Thanks bro I'm trying to get it right it's taking me a while I've got a bunch more equipment going in this weekend
Пікірлер
Been waiting on some videos
What’s this sub look like compared to a Zv6 size wise?
@@FatMat916 there coming bro I had a hiccup last weekend the LOC I was running blew and literally took the AAK 6k and my LF Audio HPVM with it and fried the wires throughout the car from a set of T-tap connectors that the original install shop used over 2 years ago it's my fault for not redoing the wiring to the LOC after 2 years so I'm chalking it up to inexperience but I have it bumping on a brand new CAB-45 V2 I'm having to redo everything just to make sure I don't get a short again but I still have the AAK 180.4 to go on the doors and the AAK 6k and LF Audio volt meter are being sent off and will be back in the system soon
Im actually thinking about going with 4 12's or 4 15's from Incriminater line. It's either this line or audio Ace. Haven't decided yet. Going in my semi!
I would definitely go with Incriminator audio over audio ace if you're going to do it might as well go with the top notch brand and quality I have come to find out you get what you pay for and Incriminator audio is in my opinion the best out right now
@@SlamryCamry19 Awesome, I appreciate the honesty brother. Thank you.
@@MrMan-ol4ic if you have the cash I have to say I am thoroughly impressed with the Tyrant I've only put an 1800.1 on it so far and it was twice as loud as my two kicker Q-class L7 12's the cab-45 will be here tomorrow to hold me over until the AAK 6k is fixed
Newb?!? 😳 Yea right. Looks like you're a lowkey expert haha My first build looked like SHYT compared to this. I had no heatwrap, wires were everywhere, and i literally grounded my amp to a random spot in the trunk which was at severe risk of rain damage haha 😂 Looks great bruh 💪🏿😎
I promise I am new to this bro I literally just started the actual build about 2 months ago before that it took me a year to figure out the power supply and get it to 15.8 I'm trying my best to get it together I blew my brand new Deafbonce AAK 6k Sunday morning from inexperience and had to order a new CAB45-V2 it's supposed to be here today so I can get bumping until I can get the AAK fixed
Make sure rca cables are in the correct spot on the radio
I like it! Cover it with carpet! Good job.
I'm going to most definitely to give it a better look just waiting to get everything installed before putting everything back together and making it look pretty
Man that is a beast , nice woofer
Thanks bro I'm trying my best to get it playing my LOC had a short and blew and I'm pretty sure it took the AAK 6k with it really disheartening to say the least and two weeks before I was going to make my first EVER show (XS power show in Knoxville) trying my best to get a new amp now
@@SlamryCamry19 It will come on time Bro 😎 just stay positive
@@eugeneirons7907 I'm trying I just went through the process of checking everything on both amps and they are definitely blown the kicker amp came on and as soon as I touched the positive and negative with the multi meter it went straight into protect and won't come out now and it shouldn't have done that I was just checking the AC voltage I really need someone in the middle TN area to help me BAD I'm completely clueless as to what caused all of this everything was playing fine and then nothing and now trying to check everything out I've blown my backup I don't know what to do I'm scared to even buy another amp
@@SlamryCamry19 there is a great guy in your area , Chris at Crazy Hobbies on KZread and Slim Reaper both are in your area
Try moving the RCAs from the power wire. Is your amplifier turned down.
I tried swapping the RCA's, moving them etc I even swapped out the amp and it only does it with that amp 😞 the LOC had a short and blew and it possibly blew the amp to it didn't do that before and caused the amp to go into a thermal protection now it only does that I fear the worst but when I swap the amp I still don't get any sub output BUT I did try that amp on the bad LOC before I realized it had blown and it threw it in and out of protection so I think it blew it to BUT I don't know enough about it to tell I have checked the sub several times with the old 9 volt battery trick and the sub is good as far as I know I'm truly stumped on this one
@@SlamryCamry19 🙆🏿♂️ man 🤦🏿♂️ hopefully you can get it all worked out 🤞🏿
@@rmcarter79 the last thing I know to try is a new amp and Sub probably going to get a budget brand like the slapz 5k and 15 and see if they work if that doesn't work I'm going to tear everything out and redo the entire car
Yeah I don't think you need any help if any critique would be overkill lots of it
How important is the material the wire ferrules are made of? Plain copper, copper tinned, silver plated copper, on and on ?
I'm no expert but to my understanding the tinned or silver plated are to prevent corrosion but give more resistance (fractional amount) then the copper but there is a difference nonetheless I myself use tinned OFC ferrules I don't think it's enough resistance to matter unless you start talking about brass or aluminum compared to copper
Neat... This is how it should be.
look man your set up is impressive i can tell you have been working on this! that dyno mat will help with higher DB good job
great brand
Yeah I had it working for about 10 minutes and pulled out of my driveway and made it a 1/4 mile and it just stopped playing I've checked the sub, amps and all other electronics and everything is fine really upsetting to say the least I'm literally in the driveway right now trying to find out what the issue is I'm told if my amp has power and was playing and cut out during the drive that it's more than likely a loose connection breaking the circuit but I don't know
@@SlamryCamry19 check fuses
often times when my set up did not play it was a broken/loose/burnt fuse
@@Zachecker I have identified the problem after almost 12 hours of searching the original t tap connectors that the install shop used to give signal to my LOC are faulty and cutting in and out I can literally touch them while music is playing and the sub starts pounding I'll have it fixed in the morning
@@SlamryCamry19 ay at least you figured it out though 💪
ay lets go man! great vid!
Keep up the good work man 💪
Will do more videos coming soon
Incriminator had this bad boy at their booth last month at triple fest and you’re right. Videos does not do any justice! 🫡🔥
Yeah I saw a video Mrchocolate posted showing it at the booth it's going in soon bro I just got the enclosure mounted to the platform this morning and all the wires run to the back going to cut a piece of MDF and screw it to the floor of the trunk and make a big amp rack with everything laid out should be posting flex videos this weekend going to work on it every morning before work this week
For being new to car audio, that looks great man!
Thanks bro I'm trying I've run into dead ends all weekend the enclosure won't fit in the trunk so I had to build a platform for it to sit on where the rear seat goes and I can't get it to lay down right lol it's in the car but standing up sideways with the sub facing the driver and the port facing the roof lol it's been a major headache doing it by myself my ol lady weighs 100 pounds soaking wet she can't lift anything to help me maybe I will have it together before next weekend
@SlamryCamry19 I feel it. Luckily I got a crane here at the shop I work at. Each one of my subs is 70lbs each so lifting a box w em is ROUGH! I actually am waiting for pre-order of the basshead garage watt meter too lol. I see u like all the nerdy details like I do 🤣 I got a sparked innovations conductor also that shows amperage pull. I just bought that sparked innovations fuse box too. Got it half price for like $45.
@SlamryCamry19 and when u order a box, it's best to make a mock up cardboard one to see if it'd fit. That's what I had to do when I ordered mine. Kinda alot of work but paying $750 for a box, you wanna get that right lol.
@@1ohmwrecker yeah I have both of them the 12 fuse and the 4 channel relay I haven't hooked up the 12 fuse yet but I have so much to do I usually don't wake up until 10 because I work 2nd shift but the XS power show is literally like 2 weeks away so I have to get it done I have to get the box anchored this morning before work and then TRY to get the sub installed I don't have the conductor YET but it's coming along with the NELO MEDIA Subwoofer temperature monitoring system and LF Audio wireless volume controller pro I just decided to stop ordering stuff for a little while because I have so many boxes in my spare bedroom that still needs to be installed
@SlamryCamry19 yeah I haven't used the fuse box yet either. I just got a dual amp rack, a smart bass 8k (boss black model) and a bunch of other stuff. I'm doing a lil upgrading. Deff want some more power on tap. Those sundown Xv3 12's just laugh at the smart bass 5k lol.
What a Beast! I may have missed it, is someone building your box?
I guess I should have watched all the video about your box, sorry. Hopefully you get it to fit.
It's going in there bro I just have a bump in the road it won't fit in the trunk but will fit perfectly right where the rear seat goes and be louder inside the cabin
If you have a soldering iron, solder your wires to speaker versus using crimp connectors. better connection and you don't have to worry about it coming loose. Shits gonna be loud brother!
Shouldn't get too hot of the AC line, relay is the way to go, only concern I would have is make sure that fan can vibrate from driving and get into your pulley or belt, other than that your dialed. If you could actually flip it over and get a couple short self tapping screws into the fender well to mount the fan to make sure it doesn't move that is what I would do. Or drill a couple small holes in the shroud so you could run a zip to another hose to keep it more stationary.
looks good, very nice equipment doing it right the first time. I was out of the game for years just like you and got back in installing stuff in my kids vehicles getting bigger and bigger. only thing I would say if you haven't done it yet brother is get some Sundown Audio 160mil vibraflex deadener, stuff is legit!
Yeah I'm having some issues I received the D4S HD3 single 15 enclosure and sub Friday and they won't fit in the trunk LoL so I am having to redo everything I tore my entire car apart yesterday it was bare inside except for the two front seats I'm going to have to build a platform for the enclosure to sit on where the rear seat goes I've been up half the night trying to figure it out going to Lowe's in a little while to get materials probably going to need help with it look for a new video later I will be posting one asking for help and ideas to make it work properly but I plan on redoing the deadening material with something stronger at least 160 mil if not MDF
You've got two of the Kicker Q class square subs that are dual 4 ohm? (41L7124) Looking at the TS specs it shows the Re to be about 3 ohm per coil. That's a little lower than normal for a nominal 4 ohm coil, but shouldn't be an issue. The main thing is that all four coils should read very close to each other. What is the other sub reading? Different? You should be able to wire both subs to either a 1 or 4 ohm nominal load. On a DC meter just before the amp it should read about 0.75 ohm or 3 ohm. Once the AC current is flowing the impedance will rise. That amplifier should easily be able to handle a 3 to 4 ohm load. You say the thermal protect light came on? Was the amplifier extremely hot from playing?
It's possible that one of the coils is damaged and is shorting out at some point in the travel. If it's like an intermittent short the amp might protect, but it shouldn't be thermal related. You might try wiring up one sub at a time and playing it, but not too loudly and see if one sub plays fine, but the other causes the amp to go into protect. Also, inspect all the wiring that you can see. Check that the terminals are tight and the speaker wires are not touching the frame. Look over the tinsel leads for any burning or other issues. Gently push or pull on the cones to listen for any scraping.
Yes they are dual 4 ohm and after taking the box and everything out and removing the subs come to find out the original spade connectors the install shop used had worn out and the ground came disconnected during playing and instantly threw the amp into protect that will NEVER happen again I won't use anything that doesn't have a push terminal or ring terminals but the new enclosure came in this morning the D4S HD3 single 15 enclosure with the triple baffle and double sided all the rest it's a good heavy duty box for the Tyrant and it has good strong ring terminals and I have 4 gauge OFC sky high power and ground for the SPEAKER wire LoL that should do it but the box wouldn't fit in the trunk or at least through the opening sooo I'm going to take the trunk apart this weekend and try again if not I will be building a platform/floor lvl with the trunk up to the rear seat and use the prefab until I can make my first show and meet some people to teach me how to Properly build a wall/4th or 6th in the rear seat area
@@SlamryCamry19 Glad you got it sorted. 👍
I dig it. She'll be screamin no doubt.
Thanks bro I can't wait for the Tyrant to get here I hear it's a monster
Goodness that's some beautiful equipment. Very nice setup... Can't wait to hear it once it's bangin. What's going on the 4 channel, front stage?
D4S 6x9 and 6x5
Keep going bro! 🫡💪🏼💯
It's coming together got the enclosure in today it's too big for the trunk LoL 😆 I guess I will have to make a platform in the rear seat area or cut the rear deck out it's going in there
@@SlamryCamry19By ANY means Necessary 🤷🏻♂️🤣! I just got done wiring my 4channel, sub and amp already done! Just waiting for it to cool down here, it’s like 92 🔥 and I don’t have a garage, and I need to sound deaden my whole SUV! 🥵🤦🏻♂️
Well done, sir. I see that you already have rubber spacers under your amplifier… I'd suggest that you add one or two more rubber spacers to allow more airflow underneath the amplifier. Other than that, you're golden!
Actually I'm thinking about ordering a dual Amp rack so I can stack the AAK 6k and AAK 180.4 on top of each other to save some room I will know more when everything comes in and I can see it laid out but I'm on it bro probably going to get another fan for the amps as well
Wow. You just gave me an idea. Thanks.
I love those 6ks
I've heard really good things about them and it's a Korean board I wanted to get something of good quality for my first high powered setup so it hopefully lasts awhile my D4S Single 15 Enclosure is supposed to be here this morning and the sub shouldn't be too far behind and we will see what it can do I'm stoked to see it in action I got to hear a salt 4k on a single ZV6 12 Monday and it was moving quite a bit of air for a single 12 I'm hoping to see better results from this setup
Getting it done ain't you 😁 anxious to see how they sound but they look great though 😉
I can't wait bro I've been up since 5AM waiting for the Enclosure to arrive I'm really excited about this build I've never heard anything bigger than a 4k and I just heard that Monday a salt 4k on a ZV6 12 and it was super impressive for a single 12 I'm hoping to see better results from the 15 and the 6k
I think you will 🔊🔊👍🏿
Looks great man
Thank you kind sir I appreciate it I will be posting more videos of the build this weekend with a few unboxing videos
Looks good man that fan will work fine like that
Thank you for checking it out I'm nervous I'm going to mess something up I've already had a few close calls but I'm trying my best
Don't be nervous just go for it!! The hard work will pay off I promise
One of your voice coils is starting to 5:58 fall that's why your amplifier is going into protection. I would try the good subwoofer in a custom enclosure.
Already on the way bro I'm waiting for a 15" Incriminator audio TYRANT rated for 5K RMS to put on my AAK 6k and I have 4 gauge speaker wire for it so there's no mistakes next time I also ordered a new head unit, DSP, four channel AAK 180.4 , D4S 6x9 and 6x5 door speakers all kinds of stuff to install this next weekend before the sub arrives I also have a D4S HD3 single 15 enclosure that will be here tomorrow I'm going to do an unboxing on it and the sub because I haven't seen anything on either item on here stay tuned coming this weekend and whenever the Sub arrives which shouldn't be long now it's been over a month since I ordered it with a 20-25 business days build time I'll be hooking everything up and tuning with the DD-1 and CC-1 should be able to give a demo of the doors this weekend
Everything looks good bro! Just gotta get u out to some shows! 😅
Oh bro I am on the way I just got tracking info for the enclosure FINALLY!! It's on the way and it's been 26 business days yesterday for the sub so it should ship next week I think I might be able to make the XS power show after all I'll be posting some more videos tomorrow got a bunch of stuff in this week and God willing I make the XS power show I will get as much footage as possible I can't wait
I think you will be okay with the fan being right there 👍🏿 The only thing I saw was from the last video I would try to put spacers under the 6K so that the fan can also blow underneath it 👌🏿
Yes I have some little grommet under there but they are not doing much when I get paid next week I'm going to order a dual amp rack and stack the two AAK's on top of each other
Man ... Looks good 👌🏿
Hate to get off topic but PLEASE need some help where did you get the belt from to run your H.O. Alternator tried parts stores but no help Thanks in advance also just subscribe so keep posting
I understand the frustration of this all to well I actually went to every parts store in town and looked online and every single place I tried gave me a different belt size I eventually just waited until I had a full two day weekend off work and went out and took the belt and alternator off and measured it and took it to O'Reilly's and the lady behind the counter was able to read a faint number and come to find out the only people that make a belt for the car is Toyota and has to be bought at a dealership but they don't make any other size except the stock so I had to get the stock size and guess it almost 3/4 of an inch shorter I still have the box that my belt came in with the part number on it in case I ever needed another I will look after I get off work and send it to you
Ok I have the box I'm assuming you have the same vehicle as me and if so the belt I got came from NAPA auto parts and the part # 060448 and the belt size is 45-3/8" inches I hope it helps it works perfectly for me no charging issues or slipping reading 15.8 on the dash
Nice start man...should sound real good when you're done
Thanks bro I'm trying to get it right it's taking me a while I've got a bunch more equipment going in this weekend