Neat... This is how it should be.

Man ... Looks good 👌🏿

Looks great man

@SlamryCamry19

Ай бұрын

Thank you kind sir I appreciate it I will be posting more videos of the build this weekend with a few unboxing videos

Well done, sir. I see that you already have rubber spacers under your amplifier… I'd suggest that you add one or two more rubber spacers to allow more airflow underneath the amplifier. Other than that, you're golden!

@SlamryCamry19

Ай бұрын

Actually I'm thinking about ordering a dual Amp rack so I can stack the AAK 6k and AAK 180.4 on top of each other to save some room I will know more when everything comes in and I can see it laid out but I'm on it bro probably going to get another fan for the amps as well

@tedtan6449

24 күн бұрын

Wow. You just gave me an idea. Thanks.

Newb?!? 😳 Yea right. Looks like you're a lowkey expert haha My first build looked like SHYT compared to this. I had no heatwrap, wires were everywhere, and i literally grounded my amp to a random spot in the trunk which was at severe risk of rain damage haha 😂 Looks great bruh 💪🏿😎

@SlamryCamry19

20 күн бұрын

I promise I am new to this bro I literally just started the actual build about 2 months ago before that it took me a year to figure out the power supply and get it to 15.8 I'm trying my best to get it together I blew my brand new Deafbonce AAK 6k Sunday morning from inexperience and had to order a new CAB45-V2 it's supposed to be here today so I can get bumping until I can get the AAK fixed

Everything looks good bro! Just gotta get u out to some shows! 😅

@SlamryCamry19

Ай бұрын

Oh bro I am on the way I just got tracking info for the enclosure FINALLY!! It's on the way and it's been 26 business days yesterday for the sub so it should ship next week I think I might be able to make the XS power show after all I'll be posting some more videos tomorrow got a bunch of stuff in this week and God willing I make the XS power show I will get as much footage as possible I can't wait

looks good, very nice equipment doing it right the first time. I was out of the game for years just like you and got back in installing stuff in my kids vehicles getting bigger and bigger. only thing I would say if you haven't done it yet brother is get some Sundown Audio 160mil vibraflex deadener, stuff is legit!

@SlamryCamry19

29 күн бұрын

Yeah I'm having some issues I received the D4S HD3 single 15 enclosure and sub Friday and they won't fit in the trunk LoL so I am having to redo everything I tore my entire car apart yesterday it was bare inside except for the two front seats I'm going to have to build a platform for the enclosure to sit on where the rear seat goes I've been up half the night trying to figure it out going to Lowe's in a little while to get materials probably going to need help with it look for a new video later I will be posting one asking for help and ideas to make it work properly but I plan on redoing the deadening material with something stronger at least 160 mil if not MDF

I love those 6ks

@SlamryCamry19

Ай бұрын

I've heard really good things about them and it's a Korean board I wanted to get something of good quality for my first high powered setup so it hopefully lasts awhile my D4S Single 15 Enclosure is supposed to be here this morning and the sub shouldn't be too far behind and we will see what it can do I'm stoked to see it in action I got to hear a salt 4k on a single ZV6 12 Monday and it was moving quite a bit of air for a single 12 I'm hoping to see better results from this setup

One of your voice coils is starting to 5:58 fall that's why your amplifier is going into protection. I would try the good subwoofer in a custom enclosure.

@SlamryCamry19

Ай бұрын

Already on the way bro I'm waiting for a 15" Incriminator audio TYRANT rated for 5K RMS to put on my AAK 6k and I have 4 gauge speaker wire for it so there's no mistakes next time I also ordered a new head unit, DSP, four channel AAK 180.4 , D4S 6x9 and 6x5 door speakers all kinds of stuff to install this next weekend before the sub arrives I also have a D4S HD3 single 15 enclosure that will be here tomorrow I'm going to do an unboxing on it and the sub because I haven't seen anything on either item on here stay tuned coming this weekend and whenever the Sub arrives which shouldn't be long now it's been over a month since I ordered it with a 20-25 business days build time I'll be hooking everything up and tuning with the DD-1 and CC-1 should be able to give a demo of the doors this weekend

Keep it up!! It’s good to take your time like your doing and not rushing it

@SlamryCamry19

23 сағат бұрын

@@808patanderson I am bro I have done a bunch of changes since the video and show I will be posting an update in a few hours I got the basshead garage wattage meter I'm going to install and do some testing with it against the DMM and clamp meter and see where I'm at

@808patanderson

23 сағат бұрын

@@SlamryCamry19 I just got my watt meter in the mail yesterday will be installing soon too

Keep going bro! 🫡💪🏼💯

@SlamryCamry19

Ай бұрын

It's coming together got the enclosure in today it's too big for the trunk LoL 😆 I guess I will have to make a platform in the rear seat area or cut the rear deck out it's going in there

@MoToArchY

Ай бұрын

@@SlamryCamry19By ANY means Necessary 🤷🏻‍♂️🤣! I just got done wiring my 4channel, sub and amp already done! Just waiting for it to cool down here, it’s like 92 🔥 and I don’t have a garage, and I need to sound deaden my whole SUV! 🥵🤦🏻‍♂️

Nice start man...should sound real good when you're done

@SlamryCamry19

Ай бұрын

Thanks bro I'm trying to get it right it's taking me a while I've got a bunch more equipment going in this weekend

ay lets go man! great vid!

How important is the material the wire ferrules are made of? Plain copper, copper tinned, silver plated copper, on and on ?

@SlamryCamry19

23 күн бұрын

I'm no expert but to my understanding the tinned or silver plated are to prevent corrosion but give more resistance (fractional amount) then the copper but there is a difference nonetheless I myself use tinned OFC ferrules I don't think it's enough resistance to matter unless you start talking about brass or aluminum compared to copper

For being new to car audio, that looks great man!

@SlamryCamry19

28 күн бұрын

Thanks bro I'm trying I've run into dead ends all weekend the enclosure won't fit in the trunk so I had to build a platform for it to sit on where the rear seat goes and I can't get it to lay down right lol it's in the car but standing up sideways with the sub facing the driver and the port facing the roof lol it's been a major headache doing it by myself my ol lady weighs 100 pounds soaking wet she can't lift anything to help me maybe I will have it together before next weekend

@1ohmwrecker

28 күн бұрын

@SlamryCamry19 I feel it. Luckily I got a crane here at the shop I work at. Each one of my subs is 70lbs each so lifting a box w em is ROUGH! I actually am waiting for pre-order of the basshead garage watt meter too lol. I see u like all the nerdy details like I do 🤣 I got a sparked innovations conductor also that shows amperage pull. I just bought that sparked innovations fuse box too. Got it half price for like $45.

@1ohmwrecker

28 күн бұрын

@SlamryCamry19 and when u order a box, it's best to make a mock up cardboard one to see if it'd fit. That's what I had to do when I ordered mine. Kinda alot of work but paying $750 for a box, you wanna get that right lol.

@SlamryCamry19

28 күн бұрын

@@1ohmwrecker yeah I have both of them the 12 fuse and the 4 channel relay I haven't hooked up the 12 fuse yet but I have so much to do I usually don't wake up until 10 because I work 2nd shift but the XS power show is literally like 2 weeks away so I have to get it done I have to get the box anchored this morning before work and then TRY to get the sub installed I don't have the conductor YET but it's coming along with the NELO MEDIA Subwoofer temperature monitoring system and LF Audio wireless volume controller pro I just decided to stop ordering stuff for a little while because I have so many boxes in my spare bedroom that still needs to be installed

@1ohmwrecker

28 күн бұрын

@SlamryCamry19 yeah I haven't used the fuse box yet either. I just got a dual amp rack, a smart bass 8k (boss black model) and a bunch of other stuff. I'm doing a lil upgrading. Deff want some more power on tap. Those sundown Xv3 12's just laugh at the smart bass 5k lol.

Goodness that's some beautiful equipment. Very nice setup... Can't wait to hear it once it's bangin. What's going on the 4 channel, front stage?

@SlamryCamry19

Ай бұрын

D4S 6x9 and 6x5

You've got two of the Kicker Q class square subs that are dual 4 ohm? (41L7124) Looking at the TS specs it shows the Re to be about 3 ohm per coil. That's a little lower than normal for a nominal 4 ohm coil, but shouldn't be an issue. The main thing is that all four coils should read very close to each other. What is the other sub reading? Different? You should be able to wire both subs to either a 1 or 4 ohm nominal load. On a DC meter just before the amp it should read about 0.75 ohm or 3 ohm. Once the AC current is flowing the impedance will rise. That amplifier should easily be able to handle a 3 to 4 ohm load. You say the thermal protect light came on? Was the amplifier extremely hot from playing?

@JasonWW2000

Ай бұрын

It's possible that one of the coils is damaged and is shorting out at some point in the travel. If it's like an intermittent short the amp might protect, but it shouldn't be thermal related. You might try wiring up one sub at a time and playing it, but not too loudly and see if one sub plays fine, but the other causes the amp to go into protect. Also, inspect all the wiring that you can see. Check that the terminals are tight and the speaker wires are not touching the frame. Look over the tinsel leads for any burning or other issues. Gently push or pull on the cones to listen for any scraping.

@SlamryCamry19

Ай бұрын

Yes they are dual 4 ohm and after taking the box and everything out and removing the subs come to find out the original spade connectors the install shop used had worn out and the ground came disconnected during playing and instantly threw the amp into protect that will NEVER happen again I won't use anything that doesn't have a push terminal or ring terminals but the new enclosure came in this morning the D4S HD3 single 15 enclosure with the triple baffle and double sided all the rest it's a good heavy duty box for the Tyrant and it has good strong ring terminals and I have 4 gauge OFC sky high power and ground for the SPEAKER wire LoL that should do it but the box wouldn't fit in the trunk or at least through the opening sooo I'm going to take the trunk apart this weekend and try again if not I will be building a platform/floor lvl with the trunk up to the rear seat and use the prefab until I can make my first show and meet some people to teach me how to Properly build a wall/4th or 6th in the rear seat area

@JasonWW2000

Ай бұрын

@@SlamryCamry19 Glad you got it sorted. 👍

Yeah I don't think you need any help if any critique would be overkill lots of it