Пікірлер

• 
  @Fortes_RC_Adv3 күн бұрын

  Very cool track🤩💪

• 
  @TaurusPresents5 күн бұрын

  Very 🆒filming and driving. 👍I would like to have a backyard like that too. The Losi Hammer Rey is a very nice looking RC. I managed to reduce the tendency to body roll by putting double rear wheels on it. The Losi Hammer Rey even looks a bit more extreme and is actually still cool to see and still to the scale. I have a video of my first test drive on my KZread channel. Greetings Jos 👋🍀

• 
  @YARCWest4 күн бұрын

  Awesome! I’ll check it out

• 
  @raident296 күн бұрын

  i like that enduro12 better than the beluga. do you have any size comparison footage for that enduro12 and beluga?

• 
  @YARCWest6 күн бұрын

  This video is probably the closest I have. There are also shots of the Enduro12 alongside the R1011

• 
  @bernardtroopswmc95086 күн бұрын

  i did watch it till the end.. so you're not alone buddy.. keep it up

• 
  @YARCWest6 күн бұрын

  Legend!

• 
  @pandacrawler6x68 күн бұрын

  Nice and Cool Spot! So many challenging lines and obstacles ❤!!! 🐼🏁🐻‍❄️

• 
  @YARCWest7 күн бұрын

  Yeah it’s a cool little spot, with shade!

• 
  @pandacrawler6x67 күн бұрын

  Very cool Indeed ❤

• 
  @CALIZONAOUTDOORS8 күн бұрын

  Nice little action pack short!

• 
  @YARCWest7 күн бұрын

  Thanks!

• 
  @rcarty4198 күн бұрын

  Wow Awsome spot to play! Great run! Have great day my man!

• 
  @YARCWest8 күн бұрын

  Thanks, you too!

• 
  @jimbo42038 күн бұрын

  Fun track will just get better with running 😊

• 
  @YARCWest8 күн бұрын

  Since the track is still pretty rough, the Hammer Rey absolutely kills it on those spots at speed

• 
  @pandacrawler6x68 күн бұрын

  Very cool track and nice race🐻‍❄️🏁🐼👌🏻 🤔 My Rockcrawler RGT EX86170 CHALLENGER Windms there 😅

• 
  @YARCWest8 күн бұрын

  haha! Thanks for checking it out!

• 
  @pandacrawler6x68 күн бұрын

  You're welcome my Good Friend ❤!!! 🐻‍❄️🏁🐼

• 
  @RCTeamAustria8 күн бұрын

  pretty cool track and video!

• 
  @YARCWest8 күн бұрын

  Thanks for checking it out!

• 
  @RCBirds8 күн бұрын

  Hey Corey. Nice video. Looks like you had a lot of fun. I like that it's called secret, too😂

• 
  @YARCWest8 күн бұрын

  Yeah it was a lot of fun!

• 
  @heliosentd4378 күн бұрын

  That is a great spot with with more untapped potential. definitely a few lines that need to be tried again too. I heard tell of a 50ft waterfall a little farther down. sounds do-able to me. 😵‍💫

• 
  @heliosentd4378 күн бұрын

  Its an interesting comparison, they both have good and bad points. The Hammer Rey has a fantastic suspension and large bump absorbing tires that make it smooth as silk even in the raw un-smoothed section of track. The Arrma Senton Is much lower to the ground with a lightweight shell. That low of a center of gravity means you have to be full throttle and basically out of control to roll it. Which is a must at least once a day.🙂🙃🙂🙃

• 
  @shadowx56488 күн бұрын

  Hi. Is trx4 parts compatible to that rig?

• 
  @YARCWest8 күн бұрын

  All I can say is that I know some of them are

• 
  @knudger6668 күн бұрын

  Super cool video, mine should be here in a couple of days...

• 
  @YARCWest8 күн бұрын

  Thanks, I appreciate it! Hope you enjoy it!

• 
  @Fortes_RC_Adv10 күн бұрын

  Cool wrangler MN 👌💪😁

• 
  @YARCWest10 күн бұрын

  It's getting there!

• 
  @MH4family11 күн бұрын

  mn222 product failed

• 
  @YARCWest11 күн бұрын

  I agree

• 
  @RCTeamAustria11 күн бұрын

  great footage

• 
  @YARCWest11 күн бұрын

  Thank you kindly!

• 
  @jimbo420311 күн бұрын

  Looks like a good time 😊

• 
  @YARCWest11 күн бұрын

  It's a blast, man!

• 
  @duanelamb470612 күн бұрын

  Nice runs, what a great place to play. 😅❤

• 
  @YARCWest11 күн бұрын

  It really is!

• 
  @RCBirds12 күн бұрын

  Nice crew and run👍

• 
  @YARCWest11 күн бұрын

  Thanks, Dirk!

• 
  @pandacrawler6x612 күн бұрын

  Great up-grades my Friend and nice course ❤

• 
  @YARCWest11 күн бұрын

  Thanks for the visit, Panda!

• 
  @pandacrawler6x610 күн бұрын

  🐻‍❄️🍻🐼👌🏻 You're welcome my Friend! Cheers🎉

• 
  @pandacrawler6x612 күн бұрын

  Great Vídeo my Friend! 🐻‍❄️🍻🐼👌🏻 A nice tip and very usefull tutorial to! 🏁🏆🏁

• 
  @YARCWest11 күн бұрын

  Thank you very much!

• 
  @pandacrawler6x610 күн бұрын

  You're welcome my Good Friend ❤! Have a Good Weekend 🎉

• 
  @rcplaytime12 күн бұрын

  just watched your latest vid on this , you've made a big difference to it sofar 👍👍😀😀👌👌

• 
  @YARCWest12 күн бұрын

  Appreciate you checking them out!

• 
  @rcplaytime12 күн бұрын

  very cool truck 💪💪😎😎

• 
  @YARCWest12 күн бұрын

  Thanks 👍

• 
  @rcplaytime12 күн бұрын

  wow 😀 what a difference 😎 excellent work 😀👍👍

• 
  @YARCWest12 күн бұрын

  Thanks, friend!

• 
  @CALIZONAOUTDOORS13 күн бұрын

  Very cool upgrades! Thanks for sharing.

• 
  @YARCWest12 күн бұрын

  Thanks for watching!

• 
  @RCBirds13 күн бұрын

  Great upgrades. The motor's definitively the bst of them

• 
  @YARCWest12 күн бұрын

  Thanks, Dirk! That motor runs well in the truck

• 
  @bermainbersamaabidahdana-mo6un13 күн бұрын

  Keren, memperbaiki RC, terimakasih teman sudah berbagi informasi , selamat beraktivitas tetap semangat dan salam sukses👍❤

• 
  @YARCWest12 күн бұрын

  Thank you for your kind words

• 
  @fairrc13 күн бұрын

  Awesome video! Thanks for sharing it.

• 
  @YARCWest13 күн бұрын

  It’s a great truck!

• 
  @RCTeamAustria13 күн бұрын

  nice upgrades

• 
  @YARCWest12 күн бұрын

  Thanks!

• 
  @rcgasm13 күн бұрын

  good work brother!!!

• 
  @YARCWest13 күн бұрын

  Thanks, mate! I didn't intend on changing the motor but once I had it open I thought I may as well test it out.

• 
  @Huwaki6513 күн бұрын

  Which do you think is better out of the box, hb toys beluga or mn 222? are the parts interchangeable on both?

• 
  @YARCWest13 күн бұрын

  My opinion, the Beluga for sure. The Beluga is based on the TRX4 platform so some parts should be interchangeable. The MN222 is based on the early SCX10.2 platform so there is a lot of parts availability. The Beluga has better electronics out of the box and it’s not even close. I do have my complaints about the Beluga though.

• 
  @Huwaki6513 күн бұрын

  @@YARCWest Mn222 just got listed at my local marketplace and they are both exactly at 200usd range. But hey, your improvements made it more capable! Good video

• 
  @YARCWest13 күн бұрын

  Thanks! Appreciate you watching, I also have a series on both of the HB Toys Wilderness trucks

• 
  @Huwaki6513 күн бұрын

  @@YARCWest what are the next upgrade path for your build? though it's really already capable

• 
  @YARCWest13 күн бұрын

  For the MN222, fix the suspension issue in the front, tune the shocks, upgrade wheels and tires once the wingnut issues is solved, install the winch and add some scale details.

• 
  @DaddyDaughterRC-sw2zb14 күн бұрын

  Great video and tests 👍. I was going to swap to 1080 (£38) on my daughters beluga ( very similar esc as yours) but ali x had the fusion se 1800 on sale for £58 so it was a no brainer and went whole hog. Keep up the great work 💪👍

• 
  @YARCWest14 күн бұрын

  Yeah that is a great deal! The Fusion SE is perfect for the Beluga. I have it in the R1011.

• 
  @bermainbersamaabidahdana-mo6un14 күн бұрын

  Keren, RC nya sangat bagus, terimakasih teman sudah berbagi cerita, selamat beraktivitas tetap semangat dan salam sukses👍❤

• 
  @YARCWest14 күн бұрын

  Thanks, friend!

• 
  @rcgasm14 күн бұрын

  Just put 1060 HW on my mn222, change transmitter, and servo. And it pretty good performance 🔥

• 
  @YARCWest14 күн бұрын

  I wasn't sure how much of it was the transmitter/ receiver but I was considering it a possibility. I'm currently running a HW 1080, I upgraded the shock towers and added Desert Lizards shocks. I get a lot more travel but now I'm getting tire rub on the passenger side because of the 4-link suspension with Chassis mounted servo. Tomorrow I'm going to pull out the motor and check the pinion gear as well, the motor seems to run really hot.

• 
  @YARCWest14 күн бұрын

  BTW, I saw your review this morning. Nice job!

• 
  @rcgasm14 күн бұрын

  @@YARCWest Yes, it is indeed a problem that the tire meets the shock when we turn. And when we change the motor, the gearbox will be damaged, it happened to my mn999 too. I think it should be changed to a reverse gearbox.

• 
  @rcgasm14 күн бұрын

  @@YARCWest thanks mate 🔥🔥

• 
  @YARCWest14 күн бұрын

  Yeah there doesn't seem to be any gear reduction so the truck goes way faster than it needs to

• 
  @hondafreak861314 күн бұрын

  Looks like it needs to be geared down. Sounds like a 30mph rc crawling over a rock

• 
  @YARCWest14 күн бұрын

  That is definitely something to look at. I'm waiting on some shock towers before I upgrade the shocks and actually take it out.

• 
  @YARCWest14 күн бұрын

  So I ran it for about 25 minutes, nothing too serious, and the motor was burn your skin hot. I definitely think you're correct. Even with the 1080 the slow crawl is not as good as you'd expect.

• 
  @NEO-RC15 күн бұрын

  Excellent video!!! Great information and presentation. 👍Id highly recommend the 1080, it’s a great esc and it’s only $40.

• 
  @YARCWest15 күн бұрын

  Thanks, man! I appreciate that! I also agree about the 1080 if you’re staying brushed. In retrospect I should have ran the tests with the body on. The weight of the body really show how poor the stock ESC is

• 
  @tantebuggabugga15 күн бұрын

  It looks like mine from Amewi AMX RockCrossTrail, I also have it in orange 👍

• 
  @YARCWest15 күн бұрын

  Right on! It’s looks mean!

• 
  @Latimerias_trailncrawl16 күн бұрын

  I found the stock esc has the same spec as the esc from mn128's newest batch. And also there's someone in the local community group who said the 120a is the peak rate, the normal rate is around 40a with sh tty modulation. This truck is basically like an "austar kit package" but you got the electronics as a bonus. Same formula as MN999.

• 
  @Huwaki6516 күн бұрын

  I got the mn128 with the new separate rx and esc. It's pretty agile on 1/12 and smaller tires but i doubt on the bigger 1/10 scale.

• 
  @Latimerias_trailncrawl16 күн бұрын

  @@Huwaki65 it basically clone & simplified version of MST CFX, which is short 1/10 scale. If you use a bigger motor, esc & wheels it is pretty capable.

• 
  @YARCWest16 күн бұрын

  That’s interesting and a bit disappointing at the same time. I did see someone mention that MN normally stamps the chassis with their logo and this one is definitely not stamped. Thanks for checking out the video!

• 
  @Latimerias_trailncrawl16 күн бұрын

  @@YARCWest seems like easier & cheap to sell if they rebrand from other company. I'm still interested though since Austar is using scx10 ii as the base.

• 
  @YARCWest16 күн бұрын

  I have the shock tower upgrade for the SCX10.2 on the way!

• 
  @RCBirds16 күн бұрын

  "significantly different"😂😂😂 Since my first Fusion SE, I'll never want to use another one. One thing, the 1060's a drag brake. Just remove the jumper for the throttle settings. Great video Corey

• 
  @YARCWest16 күн бұрын

  Thanks for watching, Dirk! I have the jumper removed on my 1060s :)

• 
  @yusufhandoko784617 күн бұрын

  What size are the new tires?

• 
  @YARCWest17 күн бұрын

  New tires are 4.7x1.9inch 118mmx46mm

• 
  @yusufhandoko784617 күн бұрын

  Size tire?

• 
  @YARCWest17 күн бұрын

  Stock is 1.9inch 115x48mm

• 
  @pandacrawler6x617 күн бұрын

  Beautifull and Awesome RC Jeep❤

• 
  @YARCWest17 күн бұрын

  Thank you! 👍

• 
  @pandacrawler6x616 күн бұрын

  You're welcome my Good Friend ❤ Cheers 🎉

• 
  @pandacrawler6x617 күн бұрын

  Amazing cool RCs and very nice mods and up-grades ❤ Great RC Collection my Friend 😮

• 
  @YARCWest17 күн бұрын

  Many many thanks!

• 
  @pandacrawler6x616 күн бұрын

  You're welcome my Good Friend ❤ Have a Great weekend ❤

• 
  @heliosentd43717 күн бұрын

  The TRX4 would be a good comparison against the Ascent 18 which I upgraded with tires, dif covers and high clearance links but its the stock motor. The only thing that can compare to the 1/10 Ascent Everest with a Fusion se is your Ascent fusion or a competition crawler.😉I might be biased. 😏

• 
  @YARCWest17 күн бұрын

  The ESC on the TRX4M leaves a bit to be desired when compared to the Ascent18

• 
  @YARCWest17 күн бұрын

  I said in the video it is a 55kg servo, it is actually a 55g servo.