I said in the video it is a 55kg servo, it is actually a 55g servo.

just watched your latest vid on this , you've made a big difference to it sofar 👍👍😀😀👌👌

@YARCWest

14 күн бұрын

Appreciate you checking them out!

Great presentation Corey. NM's doing great and high detailed cars for a budget price. The ESC for sure should be changed. The position of the power button's annoying

@YARCWest

22 күн бұрын

Thanks! I was debating on whether or not to upgrade it and but caved last night and ordered a 1080 and some scale shocks

The wingnuts... the esc squealing for it's life... the 4 link frontend with... CMS...? that was something! xD

@YARCWest

20 күн бұрын

haha yeah turns out my reluctance to by anything MN Model was very well placed. Appreciate you checking it out!

Just put 1060 HW on my mn222, change transmitter, and servo. And it pretty good performance 🔥

@YARCWest

16 күн бұрын

I wasn't sure how much of it was the transmitter/ receiver but I was considering it a possibility. I'm currently running a HW 1080, I upgraded the shock towers and added Desert Lizards shocks. I get a lot more travel but now I'm getting tire rub on the passenger side because of the 4-link suspension with Chassis mounted servo. Tomorrow I'm going to pull out the motor and check the pinion gear as well, the motor seems to run really hot.

@YARCWest

16 күн бұрын

BTW, I saw your review this morning. Nice job!

@rcgasm

16 күн бұрын

@@YARCWest Yes, it is indeed a problem that the tire meets the shock when we turn. And when we change the motor, the gearbox will be damaged, it happened to my mn999 too. I think it should be changed to a reverse gearbox.

@rcgasm

16 күн бұрын

@@YARCWest thanks mate 🔥🔥

@YARCWest

16 күн бұрын

Yeah there doesn't seem to be any gear reduction so the truck goes way faster than it needs to

Awesome Unboxing and Review my Friend!!! Indeed is a Cool mini Jeep!!! 🐻‍❄️🏆🐼👌🏻

@YARCWest

20 күн бұрын

Thank you 🤗

@pandacrawler6x6

20 күн бұрын

You're welcome my Good Friend 🎉! Cheers ❤

Nice budget RC👌😉💪😁

@YARCWest

21 күн бұрын

It certainly looks good

4 link front with a chassis mounted servo?

@YARCWest

21 күн бұрын

Yup! No pan hard bar, 4-link with a chassis mounted servo, certainly an odd design choice!

nice

@YARCWest

20 күн бұрын

Thanks!

I got into the hobby with WPL, I think that between WPL and MN they are great vehicles for "how to upgrade every part". I dont even mean that in a bad way, I learned a ton upgrading them and never worried about messing them up because they were inexpensive to begin with. I would buy this, knowing what i know now (and from this video) fully expecting to have to upgrade parts. Great review, looking forward to the ESC upgrade!👍

@YARCWest

21 күн бұрын

Appreciate you watching! Those are all fair and good points, theoretically the ESC upgrade should be a breeze and pretty inexpensive also. The truck seems to have everything else already in place. Minus the weird 4-link suspension in the front with a chassis mounted servo

I think it has low speed and high speed and low speed can give you greater modulation

@YARCWest

21 күн бұрын

It certainly acts like it but the gear box is only single speed and it doesn’t seem to be setup for high and low gear

In your honest opinion, is this MN222 worth getting ?

@YARCWest

19 сағат бұрын

I think your money is better spent elsewhere, at a minimum you're going to need to replace the ESC

@byrddmann0113

19 сағат бұрын

@YARCWest replacing a ESC is the same as replacing the steering servo. Is this rc vehicle heavy or light weight ? I'm looking for a sturdy well built rc Jeep that doesn't cost a fortune. Most people replace the wheels, tires, servos & ESC anyways.

@YARCWest

15 сағат бұрын

The body is heavy and is a hardbody, it is on the early SCX10.2 platform so there are upgrades available to it. If you're okay with replacing the ESC, Motor, Servo, Shock Towers, Shocks, fixing the front suspension to 3-link with pan hard (axle mounted wont work since there is not enough space), then I would say go for it, but you're going to put around +$150 into it. There is nothing wrong with the chassis and drive train, it is everything else that is a problem. In follow up videos I do some upgrades on it but it is still not near where I want it to be. It is okay for a light trail truck after those upgrades but seems like a money pit with all the stuff I still need to do with it. It is not terrible after all that, there are simply better trucks out there. Have you considered an Injora roller and putting one of their hardbodies on it? I can't vouch for how easy it would be but I know picking my own electronics would be light years better. I don't want to dissuade you but I would not recommend this truck unless you have the extra cash to fix it.

mn222 product failed

@YARCWest

13 күн бұрын

I agree

Wow hands down the most annoying sounding crawler I've seen. Its like the horn is stuck on. I'd by a new ESC at the same time as I bought the truck after watching this vid. the good thing is it looks like the ESC and receiver are separate.

@YARCWest

21 күн бұрын

Loudest one I’ve ever heard, louder than a HW 1040