I replaced the airflow sensor on my daughter’s car. Does the car need to be running? The check engine light was off but now it’s back on.
@michaelrobinson5347Күн бұрын
Video was really helpful. Just an FYI, this water pump came out with the exact same color silicone on the gasket, so it definitely comes from the factory that way.
@robinjames1876Күн бұрын
Keep up the good job
@keemsmediaVR30Күн бұрын
Video clean nuh Rass Bwoy 🔥🔥
@jamesreese4529Күн бұрын
Great video bro!
@DonkeyZooКүн бұрын
Thanks great video mine way also the fuse but curious why it popped
@fullspeed89motosКүн бұрын
the first person should have just leave it for the real mechanic
@PaulieWalnutssКүн бұрын
Wua guan mon! 👊👍
@hellbilly1967Күн бұрын
71 inch pounds not foot pounds.
@user-zg6tc5gh6wКүн бұрын
Great Video. The replacement is very basic no need for re learns or re programs. Just one piece of information. After replacing the wiper switch the front wipers and washer won't work with the hood open.
@lucasromero9377Күн бұрын
How is everyone able to take of that sensor so easy?? Im struggling
@Joe_Biden_2024_official2 күн бұрын
Can remove just the throttle body and starter can come out the side towards the transmission
@jms76202 күн бұрын
What year is that
@streetstyle92002 күн бұрын
All these are signs of running these engines with low oil!! If check engine light flashes and you have replaced the spark plugs the ignition coils and knock sensor then the engine is garbage!!!!
@TheStreetest2 күн бұрын
Awesome. Thanks on the vid. I need more space in my car for my locksmith tools and stuff. 🚗 this will help. 🔒
@rickyvanwinkle15342 күн бұрын
Great video . Informative and Right to the point
@garaiselvis3 күн бұрын
the right side has that extension at the end. can the extension be removed so only the axel is changed and the extension stays the old one?
@richardmorgan35003 күн бұрын
Pity this vid doesn't cover the hard part - getting the piston back into the caliper
@firdaustalukder33283 күн бұрын
bro did you tune her
@DULLAHGOSOHARD2 күн бұрын
no
@firdaustalukder33282 күн бұрын
@@DULLAHGOSOHARD doesn’t it run lean
@DULLAHGOSOHARD2 күн бұрын
@@firdaustalukder3328 i never dyno it so i dont know ... i know it have a Oxygen sensor so if it's reading lean it will tell the computer to add or take away fuel to get the fuel ratio that it requires from factory
@firdaustalukder33282 күн бұрын
@@DULLAHGOSOHARD that’s the problem I also thought that but some other youtubers say the factory tune with the o2 sensor makes it run lean because it sees no back pressure/ less back pressure I’m not sure about it but thank you for replying
@DULLAHGOSOHARD2 күн бұрын
@@firdaustalukder3328 there is alot of benefits to get from a good tune wether you change the exhaust or not am not against tune
@altonkenne5793 күн бұрын
I have 2026 Malibu with 1.5 turbo. 82k miles. Cleaned maf sensor and throttle body and changed spark plugs no codes came up but idles rough and mileage went from 42 highway to 22 mph still idles rough can't find or hear any vacuum leaks. I'm stumped. I hate this electronic crap oh for the good old days of points and carbs.
@alexandriatoribio82433 күн бұрын
You are God send, that is exactly what fixed my sons car problem. After alot of trial and error, yours was the solution. Thank you
@LIG873 күн бұрын
What if it seems like my blower fan is not blowing strong on 1,2,3, or 4 setting? Is this a resistor issue? Ive changed my cabin filter and it still feels kinda weak
@gabrielesposito27353 күн бұрын
Great video Dullah! 🔥 Thank you 💯
@kaiceecalhoun92303 күн бұрын
No pressure needed on the needle nose pliers, just twist.
@itzMe-ei3qo4 күн бұрын
😂 why do you buy that sport/race tyre when you only ride straight? Buy a tour tyre
@DULLAHGOSOHARD4 күн бұрын
I buy that tire because that's what the bike come with
@itzMe-ei3qo3 күн бұрын
@@DULLAHGOSOHARD change tire!
@viewlesswind4 күн бұрын
Is the battery sealed? Can you open the top if needing to add some distilled water?
@takariweaver19244 күн бұрын
I just fixed mine thanks for video😊
@elizabethblair70174 күн бұрын
this showed exactly what i needed to do. Thanks for putting this video out
@StromanTile5 күн бұрын
this video was perfect. Thank you!
@15DurangoRT5 күн бұрын
You just made a hole in the brake line by not opening the brake fluid reservoir (or bleeder screw) before you compressed the piston.
@everyday_life19915 күн бұрын
What’s that lol
@Not_So_Super_Mario5 күн бұрын
Lifesaver
@sevenin15 күн бұрын
Wow, your going to see some flame at night ,real good. Sounds sick.👏👏👏💀
@christyberg47416 күн бұрын
It seems like a standard fuel nozzle would fit fine without that funnel. Isn’t the funnel just for filling a portable gas can?
@EyesOnTheEast6 күн бұрын
What is the exhaust on MT07? Sound better than mine
@navygurl41826 күн бұрын
Thank you i got quoted $725 for one. smh
@bradhienzachary6 күн бұрын
I'm in Australia and to replace the clock spring is like $1000! Ridiculous! The modern car is a ticking money bomb.
@princeofdathomir72256 күн бұрын
Life liberty victory!
@pfooshay7 күн бұрын
Thank you so much for mentioning the wrist control. That is going to help me a lot!!!!!!
@bjordan957 күн бұрын
Was everyone else sick of being told to hold the '0.0/SET' button while turning the ignition on, only for it not to work? 😂 this video saved me
@sidtapia097 күн бұрын
Can I change it with the engine off?
@danycharlemagne21048 күн бұрын
Thank you brother
@kylehood33048 күн бұрын
Battery dead in TRUNK, without thinking shut trunk lid. No power no release and no latches to fold down seat, there inside. Can't remove seat back, again seat has to tilt down. This really helped me out of a jam! Thanks for the video and one I could actually see how u did it.
@MichaelRichie-o7o8 күн бұрын
How do you see the description
@ExcellentHomeservices8 күн бұрын
PLEASE HELP ME! I have the 2014 eco and the dash is reading “power steering “ problem. The door locks keep unlocking and locking real fast. The car wants to stop. What is going on?
@dannyatencio46858 күн бұрын
Dude really ! Thank you I tried your fix first and it worked 🎉
@lucianoanghewiche14528 күн бұрын
Z900 is the beast
@MrJakob498 күн бұрын
You need a trim tool to get the plastic pieces apart. Watching you use a screw driver is scary, easy way to tear the headliner or scratch the plastic.
@josevelazquez36739 күн бұрын
Mines broke inside and would cause the car to not want to start. I changed it and the car still doesn’t start correctly. What’s the issue?
Пікірлер
What type of wrench are you using.
I replaced the airflow sensor on my daughter’s car. Does the car need to be running? The check engine light was off but now it’s back on.
Video was really helpful. Just an FYI, this water pump came out with the exact same color silicone on the gasket, so it definitely comes from the factory that way.
Keep up the good job
Video clean nuh Rass Bwoy 🔥🔥
Great video bro!
Thanks great video mine way also the fuse but curious why it popped
the first person should have just leave it for the real mechanic
Wua guan mon! 👊👍
71 inch pounds not foot pounds.
Great Video. The replacement is very basic no need for re learns or re programs. Just one piece of information. After replacing the wiper switch the front wipers and washer won't work with the hood open.
How is everyone able to take of that sensor so easy?? Im struggling
Can remove just the throttle body and starter can come out the side towards the transmission
What year is that
All these are signs of running these engines with low oil!! If check engine light flashes and you have replaced the spark plugs the ignition coils and knock sensor then the engine is garbage!!!!
Awesome. Thanks on the vid. I need more space in my car for my locksmith tools and stuff. 🚗 this will help. 🔒
Great video . Informative and Right to the point
the right side has that extension at the end. can the extension be removed so only the axel is changed and the extension stays the old one?
Pity this vid doesn't cover the hard part - getting the piston back into the caliper
bro did you tune her
no
@@DULLAHGOSOHARD doesn’t it run lean
@@firdaustalukder3328 i never dyno it so i dont know ... i know it have a Oxygen sensor so if it's reading lean it will tell the computer to add or take away fuel to get the fuel ratio that it requires from factory
@@DULLAHGOSOHARD that’s the problem I also thought that but some other youtubers say the factory tune with the o2 sensor makes it run lean because it sees no back pressure/ less back pressure I’m not sure about it but thank you for replying
@@firdaustalukder3328 there is alot of benefits to get from a good tune wether you change the exhaust or not am not against tune
I have 2026 Malibu with 1.5 turbo. 82k miles. Cleaned maf sensor and throttle body and changed spark plugs no codes came up but idles rough and mileage went from 42 highway to 22 mph still idles rough can't find or hear any vacuum leaks. I'm stumped. I hate this electronic crap oh for the good old days of points and carbs.
You are God send, that is exactly what fixed my sons car problem. After alot of trial and error, yours was the solution. Thank you
What if it seems like my blower fan is not blowing strong on 1,2,3, or 4 setting? Is this a resistor issue? Ive changed my cabin filter and it still feels kinda weak
Great video Dullah! 🔥 Thank you 💯
No pressure needed on the needle nose pliers, just twist.
😂 why do you buy that sport/race tyre when you only ride straight? Buy a tour tyre
I buy that tire because that's what the bike come with
@@DULLAHGOSOHARD change tire!
Is the battery sealed? Can you open the top if needing to add some distilled water?
I just fixed mine thanks for video😊
this showed exactly what i needed to do. Thanks for putting this video out
this video was perfect. Thank you!
You just made a hole in the brake line by not opening the brake fluid reservoir (or bleeder screw) before you compressed the piston.
What’s that lol
Lifesaver
Wow, your going to see some flame at night ,real good. Sounds sick.👏👏👏💀
It seems like a standard fuel nozzle would fit fine without that funnel. Isn’t the funnel just for filling a portable gas can?
What is the exhaust on MT07? Sound better than mine
Thank you i got quoted $725 for one. smh
I'm in Australia and to replace the clock spring is like $1000! Ridiculous! The modern car is a ticking money bomb.
Life liberty victory!
Thank you so much for mentioning the wrist control. That is going to help me a lot!!!!!!
Was everyone else sick of being told to hold the '0.0/SET' button while turning the ignition on, only for it not to work? 😂 this video saved me
Can I change it with the engine off?
Thank you brother
Battery dead in TRUNK, without thinking shut trunk lid. No power no release and no latches to fold down seat, there inside. Can't remove seat back, again seat has to tilt down. This really helped me out of a jam! Thanks for the video and one I could actually see how u did it.
How do you see the description
PLEASE HELP ME! I have the 2014 eco and the dash is reading “power steering “ problem. The door locks keep unlocking and locking real fast. The car wants to stop. What is going on?
Dude really ! Thank you I tried your fix first and it worked 🎉
Z900 is the beast
You need a trim tool to get the plastic pieces apart. Watching you use a screw driver is scary, easy way to tear the headliner or scratch the plastic.
Mines broke inside and would cause the car to not want to start. I changed it and the car still doesn’t start correctly. What’s the issue?
Your cam shaft is damage