Пікірлер

• 
  @armenmkrtchyan48652 күн бұрын

  How's the accuracy. Can it reach out 100yards?

• 
  @MiddletonMade3D2 күн бұрын

  For sure! Irons would be probably a human size target but with a red dot, it's more accurate than most shooters are going to be. We were able to hit chalk sticks at 25y pretty regularly.

• 
  @randydeserranno55758 күн бұрын

  Too bad... Micronics sold out. Sad.

• 
  @MiddletonMade3D8 күн бұрын

  I'm very sad. I'm doing research into SLS4ALL so we'll see how that goes

• 
  @paulthieu263610 күн бұрын

  Best way to contact Middleton made regarding orders ?

• 
  @MiddletonMade3D10 күн бұрын

  I'll be back in town and back to emails tonight :)

• 
  @paulthieu26369 күн бұрын

  @@MiddletonMade3Dthank you

• 
  @RcFabian9415 күн бұрын

  i dont think they will work on an cheaper option either i think they will prob anounce a fuse 2 this or next year

• 
  @MiddletonMade3D15 күн бұрын

  While that is completely logical and would totally make sense, I hope you're wrong.

• 
  @tejeshwvardhan116515 күн бұрын

  too bad! lets support open source!

• 
  @MiddletonMade3D3 күн бұрын

  I'm with ya there!

• 
  @Boo-pew15 күн бұрын

  My reply disappeared into the ether. Maybe because I included a link. ActionBOX put out a YTshort for a desktop metal sls (dmls?) 3dprinter a couple months ago, but the 'long form video' hasn't been put out yet. In the comments they mention it going to be made affordable for hobbyists.

• 
  @MiddletonMade3D3 күн бұрын

  I'll look into this ASAP! Thanks for the lead.

• 
  @tenlittleindians15 күн бұрын

  My first and last Kickstarter investment was for the Coolest Cooler. I lost $300 dollars to a flake company and will never see a penny of my money back.

• 
  @MiddletonMade3D3 күн бұрын

  My boy can't get a W 😭

• 
  @liamventer15 күн бұрын

  What it seems is that even though the kick starter met its goals, Henry and Luke did not have the confidence that they could actually deliver a satisfactory machine to the backers. Seems that the backers perhaps dodged loosing their money. Or the alternative take is that Luke and Henry viewed selling Micronics IP to Formlabs and working for them was a better deal for them. No criticism intended as that is a fair path for them to select...it was their hard work and their IP. It is not as if this was a community project with technical and financial input from community members and none of their supporters lost anything, other than some hopes. I don't doubt they have great futures in front of them. My biggest disappointment is that more SLS IP has been locked up to an existing player. We are probably reaching a point where we will need to wait for patents to expire before new players can enter the lower cost SLS printer manufacturing market.

• 
  @MiddletonMade3D15 күн бұрын

  I'm inclined to agree. I think they made the right move, I know I would have been in over my head at least. They did a kick ass job on what they started but the net good for the community is going to be to have a company with a bigger staff and resource to really make it what it needs to be. I also agree about the IP being locked up now. They had some wonderful ideas that changed the game for the industry. It's sad to see it wont be opensource.

• 
  @liamventer15 күн бұрын

  @MiddletonMade3D I am not so concerned the IP is not Open Source, I am more concerned that it is now locked up with the dominant player in the lower cost SLS printer market place. This make it harder for a new competitor to enter this market space....which is not good for consumers and ongoing technology competition driving advancements.

• 
  @talentedmrripley905715 күн бұрын

  It's double the price, although still cheaper than pretty much everything else out there, but might be worth a look at the SLS4All machine. At least there's no Kickstarter involved.

• 
  @MiddletonMade3D15 күн бұрын

  I think SLS4ALL is the only viable option right now besides the Sintratec build kit for 6k.

• 
  @802Garage15 күн бұрын

  Can't help but be disappointed and not very optimistic. I understand Micronics may not have worked out, but we wanted to see them try. I'd guess a couple years before a new affordable printer is announced and affordable will likely mean just under $10K.

• 
  @MiddletonMade3D15 күн бұрын

  I can see this being the reality

• 
  @StrongBarnes9015 күн бұрын

  Extremely depressing news.

• 
  @MiddletonMade3D15 күн бұрын

  I totally an there with ya. I now have no idea when to expect to be able to fulfill those dreams.

• 
  @3darms15 күн бұрын

  🎶Hello darkness my old friend 🎶

• 
  @MiddletonMade3D15 күн бұрын

  Talking to my friend Jameson and Coke about it makes it not so difficult 😂

• 
  @biggboysouth16 күн бұрын

  There is another guy trying to make an affordable sls printer. I believe the channel is called “SLS4ALL” or something like that

• 
  @MiddletonMade3D16 күн бұрын

  You're absolutely correct. I've been in contact with them and have done some research. I'm curious how far he'll take it and what the results of his machines influence will be. It's not even two college kids like micronics, so scaling is a real concern if he gets popular.

• 
  @biggboysouth15 күн бұрын

  @@MiddletonMade3D I just stumbled across his video the same day micronics posted they were acquired by formlabs. Whatever you can share about them would be awesome. Like you and many others I’m dreaming of being able to produce my creations at industry standard quality levels.

• 
  @MiddletonMade3D15 күн бұрын

  @biggboysouth I'll push it forward in my properties!

• 
  @HydrationAppreciator15 күн бұрын

  I'm not overly fond of the machine's size/form factor, but it does appear to be a viable ~$7k option available very soon. In his demo, the control software running on the pi /w touchpad on the front of the machine was very impressive imo

• 
  @MiddletonMade3D15 күн бұрын

  The traditional form factor seems like a downgrade in tech from the single build unit like micronics, but fairly, they're literally the only ones doing that.

• 
  @Dubtee16 күн бұрын

  My guess is we will get a new machine by 2026, itll be 6K, and there will be some very minimal flexibility on materials. They dont want their product to be completely proprietary, but my guess is if you use non-FL material, you will be limited in configuration somehow. Like generic profiles for non-BambuLab filaments on their printers for example - just moreso. Still, at the end of the day, the POINT of the project for all of us was "An affordable desktop SLS printer for everyone." Anything over three thousand dollars is past a consumer printer, in my opinion.

• 
  @MiddletonMade3D16 күн бұрын

  Those are all valid points. I think these types of machines are definitely prosumer. Bring cost, there's a good amount of post processing that the average fdm printer would be so upset about.

• 
  @HydrationAppreciator15 күн бұрын

  Part of the Kickstarter apology gift, in additon to the $1k coupon, is that Formlabs has allegedly pledged to give backers a free "open material license" once they finalize the language... Basically Formlabs will allow the use of third-party powders, but ONLY if you pay them a license fee to escape their overpriced powder ecosystem. Gross.

• 
  @MiddletonMade3D15 күн бұрын

  Yup, that's basically their out of the platform tax

• 
  @Scout339th16 күн бұрын

  Well, desktop SLS is toast for another 5 years.

• 
  @MiddletonMade3D16 күн бұрын

  That's my fear too :(

• 
  @maffioli1416 күн бұрын

  Not giving a penny to a company that demands you pay extra to use your own materials in your own machine.

• 
  @MiddletonMade3D16 күн бұрын

  That IS a huge downside. I should be able to use whatever material I want within compatibility with my own machines. Don't get me started on the red dye in the best type of auto fuel.

• 
  @ronbaer6716 күн бұрын

  i see it as instead of 5k it will now be 15k and need to apply to be able to buy

• 
  @MiddletonMade3D16 күн бұрын

  I don't think it'll go that high just because they wont want to cannibalize their Fuse 1 machine, but I have a strong feeling it won't be as affordable as we all were excited for here.

• 
  @meanman699216 күн бұрын

  Wow well if formlabs acquired them they must be on to something ETA: haven’t watched yet.

• 
  @MiddletonMade3D16 күн бұрын

  I think so. My take is mildly pessimistic, but still hopeful that we'll get a desktop SLS machine, even if it costs us more than we'd like.

• 
  @PoorManGarage16 күн бұрын

  Having an issue. I printed this to use with an m&p 2.0 it all fits well but the slide rack mechanism isn’t quite tall enough. Also I noticed it has a decent amount of flex to it. Should I extend that mechanism down to touch the top of the slide to make it more solid? Is that how it is meant to fit?

• 
  @MiddletonMade3D16 күн бұрын

  The step file is included so you can measure the distance between the top of the slide and the bottom of the handle and extrude the handle down almost that distance. That should make it a hell of a lot more refined for you.

• 
  @PoorManGarage16 күн бұрын

  @@MiddletonMade3D yup I added about 4.5mm to the charging body height so it rests on the top of the slide now. Much more solid feeling

• 
  @Francois_Dupont18 күн бұрын

  i know it seem you are mostly interested in 3D printed DIY stuff, but if i were to make a sugestion: version/adaptor for the common Moss'berg 88/500 type of dispenser?

• 
  @MiddletonMade3D18 күн бұрын

  I'll have to do some research into that. I'm not above making actual products.

• 
  @Francois_Dupont18 күн бұрын

  @@MiddletonMade3D Ay ay! i think it could be very sucessful design because that particular pea shooter is extremely popular and even more so for tacticool people.

• 
  @MiddletonMade3D18 күн бұрын

  Thanks for the suggestion!

• 
  @untrust203319 күн бұрын

  Replace that boost converter setup with a single cr123 or even some AA batteries and you will be able to eliminate that bulky part completely. It's possible to put a threaded insert for a standard mounting J arm as well.

• 
  @MiddletonMade3D19 күн бұрын

  I'll do a video on my most current version soon. It's been much more refined and slimmed down. I'm using AA and jarm with a slimmed down MJF printed housing.

• 
  @powerstrue24 күн бұрын

  Damn, what a sexy box you have.

• 
  @dans.9824 күн бұрын

  Thanks, it is just what I need .

• 
  @MiddletonMade3D24 күн бұрын

  I hope both the new series and the classes help you out!

• 
  @StrongholdArmory25 күн бұрын

  Hell yeah.

• 
  @MiddletonMade3D25 күн бұрын

  👏 😘

• 
  @powerstrue25 күн бұрын

  You guys did a great job last night. I can’t believe how much I learned. The class was way better than sorting through you tube videos for hours trying to teach yourself CAD. I learned quite a bit about print settings as well. Thanks for the support settings class.

• 
  @MiddletonMade3D25 күн бұрын

  I'm really glad you had some positive takeaways! Thanks for the support. What would you like to see covered going forward?

• 
  @powerstrue25 күн бұрын

  @@MiddletonMade3D personally I would like to have a better grasp on fillets and chamfers inside and outside. For some reason that’s a struggle for me. I get questions on printing PACF quite a bit, so maybe some pointers on that. Or maybe an overview of filaments and their uses class. I had never thought about PETGCF as a test platform to find weak areas. That was a great idea you had. I thought we were going to cover a best practices for send cut send, but must have missed that section.

• 
  @MiddletonMade3D25 күн бұрын

  @powerstrue all great suggestions! Noted. Thanks!

• 
  @rusty.shackleford.77725 күн бұрын

  Based.

• 
  @MiddletonMade3D25 күн бұрын

  Thanks for stopping by cutie.

• 
  @TheNuketrooper25 күн бұрын

  First

• 
  @MiddletonMade3D25 күн бұрын

  And the cutest

• 
  @TheNuketrooper25 күн бұрын

  Woooo

• 
  @MiddletonMade3D25 күн бұрын

  👏👏👏

• 
  @PrayingPanda26 күн бұрын

  Subscribed!

• 
  @MiddletonMade3D26 күн бұрын

  Hell yeah! Thank you.

• 
  @bobbyross352427 күн бұрын

  Happy to see the update Middleton first thing love your builds I have all your accessories and love the grandmas apple pie! The only suggestion I have or request really is to expand the grandmas apple pie and have pcc versions available, .45acp, 10mm, 9mm we neeeeed them brother! I promise if you do that your build will shatter the market of printed ar-style lowers. Can’t wait for the 1.5 GAP! I don’t have discord but I’m all over element man have you considered using that for beta testing? Could make leaks easier to prevent plus I know the awcy? Boys would be down to beta test also. Just an idea. Keep the work up man!

• 
  @MiddletonMade3D27 күн бұрын

  Thanks for the love and feedback. There's a not-zero chance of element rooms happening, but currently I'm at capacity for managing these things

• 
  @MiddletonMade3D27 күн бұрын

  Oh! And pcc stuff is def on the way. I just only have 9mm upper to start with though.

• 
  @SquirtBangReplicate27 күн бұрын

  aa-12? or ar-12? anyone working on anything like that? ..... could call it "Ground Beef" or "hamburger meat"

• 
  @MiddletonMade3D27 күн бұрын

  Not that I know of but that would be hella cool!

• 
  @d_juxtaposition_b28 күн бұрын

  Store Brand is money, stick with that.

• 
  @MiddletonMade3D28 күн бұрын

  Hell yeah. Thanks man.

• 
  @keonia.955328 күн бұрын

  Brother YES, MnC v2.5 im all over that. It was my favorite design that i couldnt get to work 😂 reprinted at least 5 times and no luck. Cant wait to check it out!

• 
  @MiddletonMade3D28 күн бұрын

  So eager for you to try the new one out!

• 
  @wadekirby857528 күн бұрын

  If a feed ramp is used can the Mac n' cheese feed HP?

• 
  @MiddletonMade3D28 күн бұрын

  With the super small chamfer on the barrel to guide projectiles in, I doubt it. How this sits is really fine line between the bolt damaging the magazine or not.

• 
  @randomguy137128 күн бұрын

  I want to see a .416 Barrett Orca...

• 
  @MiddletonMade3D28 күн бұрын

  I kinda want a 410 orca. Haha

• 
  @3darms28 күн бұрын

  All these food names making me hungry

• 
  @MiddletonMade3D28 күн бұрын

  lets grab lunch cutie!

• 
  @CobosDoesItAll28 күн бұрын

  I would love to see more rimfire builds!

• 
  @MiddletonMade3D28 күн бұрын

  you're not wrong! me too.

• 
  @SteveInGear28 күн бұрын

  I'm trying to go to your website, and it's not coming up (it says "this site can't be reached".

• 
  @MiddletonMade3D28 күн бұрын

  Good catch. I cant load it either. On the line with customer support as we speak.

• 
  @MiddletonMade3D28 күн бұрын

  Turns out the server is being upgraded and can take up to 4 hours. RIP

• 
  @paulthieu263628 күн бұрын

  Store brand is approved

• 
  @MiddletonMade3D28 күн бұрын

  hell yeah!

• 
  @stevekreitler934928 күн бұрын

  My feedback is that you should drop the loud music. Your audience is mostly shooters, and we all have bad hearing.

• 
  @MiddletonMade3D28 күн бұрын

  fair enough!

• 
  @stevep734628 күн бұрын

  Eeeeeeeeeeeeeeeeeeeeeeeeeeee

• 
  @flyingRich28 күн бұрын

  YoYoYo

• 
  @MiddletonMade3D28 күн бұрын

  <3

• 
  @nonapplicable101328 күн бұрын

  Is your nylaug remix still gonna incorporate metal receiver parts??? I was super excited for that

• 
  @MiddletonMade3D28 күн бұрын

  ill try to have a version that does, but the initial release im focusing on printed. i personally still really want the metal section so we'll see :)

• 
  @nonapplicable101328 күн бұрын

  @@MiddletonMade3D hell yeah brother, I'm still down to help test too 🤙🏻 I talked with you awhile ago about it I think, "MostlyPeacefulMachineShop"

• 
  @danepedersen302928 күн бұрын

  That SLS Apple Pie is sweet. Built SLS uppers could be a great selling option. No numbers to track.

• 
  @MiddletonMade3D28 күн бұрын

  have you been looking at my whiteboard?

• 
  @danepedersen302927 күн бұрын

  @MiddletonMade3D allrighty then!

• 
  @user-wz9ux4vh8p28 күн бұрын

  Keep it up

• 
  @MiddletonMade3D28 күн бұрын

  thanks!

• 
  @krakenmonster230229 күн бұрын

  BAWS!!!!!

• 
  @MiddletonMade3D29 күн бұрын

  👀👀👀

• 
  @BertGoSkrrt29 күн бұрын

  Thanks for the update, dad!!

• 
  @BertGoSkrrt29 күн бұрын

  Also site looks sick

• 
  @MiddletonMade3D29 күн бұрын

  Thanks Son, I appreciate it <3

• 
  @collinis129 күн бұрын

  A shorter Apple pie so I could do a 5-7.5” 300 blackout barrel would be great!

• 
  @MiddletonMade3D29 күн бұрын

  Apple Fritter is in the works and nearly there! Checkout my IG for a photo in one of my posts.

• 
  @_Livefreeordie_29 күн бұрын

  Is OOBLive coming back anytime soon or is it officially dead with how busy everyone is.

• 
  @MiddletonMade3D29 күн бұрын

  Truthfully, I'm not sure. Our chat is pretty quiet these days too. I hope we can come back soon.

• 
  @_Livefreeordie_29 күн бұрын

  @MiddletonMade3D I hope so too! I know others in the community have been wondering. Always enjoyed watching you guys.

• 
  @biggboysouth29 күн бұрын

  Hey Middle you would be more likely to know but are you aware of anyone attempting to make a receiver or frame from forged carbon fiber using 3d printed molds? It's been on my mind and haven't been able to find any info online. Also kicking the idea of a cast resin part made from a 3d printed mold. Smooth-On replied to a comment stating that their 57D and 66D is what they recommend for firearms furniture.

• 
  @MiddletonMade3D29 күн бұрын

  It's totally possible. I'm not versed enough in it myself to invest and give it a go, but i know things like grips even, with a good multi part mold, could be made with forged carbon fiber. There's a lot of room to grow in the mixed media parts. I'd be very curious to see your results if you experiment with this.

• 
  @bryc011529 күн бұрын

  Was the (assuming) 5.56 upper bear Creek too?

• 
  @MiddletonMade3D29 күн бұрын

  No! It's actually BCM upper. I have a barrel from Bear Creek in 556 for the apple pie and I've had no issues with that one but I don't have any complete uppers other than the 50 from them.