Your part on the latest Vice "Ghost gun" piece was cool

@MiddletonMade3D

2 жыл бұрын

Thank you! I've only seen the preview clip on KZread so I'm very eager to watch the full part 🤞. Thanks for the support!

Awesome work mate

@MiddletonMade3D

2 жыл бұрын

Thank you friend!

dude i love it, well done

@MiddletonMade3D

Жыл бұрын

Thanks a ton!

“Misuse does not constitute redesign” 😉

@MiddletonMade3D

2 жыл бұрын

Oh I'm with you friend. Lol. But look at JSD with how they can just change their interpretation of an existing and well established "law" / ruling.

@comeoutandpla

2 жыл бұрын

@@MiddletonMade3D no doubt. It’s almost as if they aren’t bound by laws

@MiddletonMade3D

2 жыл бұрын

That wouldn't be legal nor fall under checks and balances though sir. 🤬

Greetings fellow designer. I like what you did with the charging handle. That gives me an idea of what I might do for my next design.

@MiddletonMade3D

Жыл бұрын

Hell yeah! Can't wait to see how it turns out.

cool work! I was on the fence between this and Digital Nimbus Invader, but after printing the sauerkraut for a different project, I want to see the full package here. I might try adding 3 and/or 9 o'clock pic rails up front for a thumb rest on one and weapon light on the other. That way the screw flages would be part of the pic rail and be less obvious and the rail portions would be split lengthwise. Accessories clamped to the rail would possibly sturdy the front section more I would imagine. Also, great stuff on Vice. Keegan seems to be catching the 3d2a bug, or maybe I'm reading too deep into his psyche. lmao

@MiddletonMade3D

2 жыл бұрын

It's addictive! How could one not get drawn in? Haha. Shit man, it's not a decision between the two, the answer is both! Lol. The question is which one to print first!

@tmar697

2 жыл бұрын

@@MiddletonMade3D I won't need to decide on which first if I get a 2nd printer... I'll make this first since I don't want to shell out for a Glock kit right now and I know your folding brace is robust. I'd still like a detent or something like that to keep the brace holded, but I can make do with magnets or something.

@MiddletonMade3D

2 жыл бұрын

There IS a magnet spot on the back of it so you can get one rolling on there. Maybe in the next design I'll have some sort of mechanical retention 🤔

Hey, big guy. Thanks for the STL, I'll see about printing one soon! As for medical stuff, I'm a medic in the army. I try to source most of the stuff for my unit through North American Rescue, all their stuff is the same sort we use already.

@MiddletonMade3D

2 жыл бұрын

Thanks for the suggestion! I'm still building mine so I'll give it a peep.

@chance8649

Жыл бұрын

@@MiddletonMade3D i know im late but refuge medical is really solid, made in the usa, and will replace anything you use

@MiddletonMade3D

Жыл бұрын

That's a huge plus!

@garethdeans3017

5 ай бұрын

Where do i get the STL for this?

Looks good.

@MiddletonMade3D

2 жыл бұрын

Thanks Ryan! I appreciate the support.

The patches gave you a sub . "Come and take it '" (RIP J Stark )

You do good gods work

@MiddletonMade3D

6 ай бұрын

😘😘😘

Just FYI, the ATF Worksheet 4999 automatically fails any pistol with a secondary (forward) grip. Stupid I know. Using two hands to fire a pistol should not make it a "rifle". The brace could even be removed so no possibility of shouldering it. Yet still, ATF says two hands equals rifle. Always good to be aware.

@MiddletonMade3D

2 жыл бұрын

Sounds like infringement to me. I fire all my handguns with two hands 🤷‍♂️

@twinturbostang

2 жыл бұрын

@@MiddletonMade3D Yes, exactly! Ain't nobody doing no Cowboy shit for target shooting or self defense!

@MiddletonMade3D

2 жыл бұрын

Could you imagine if that actually happened though? That shouldn't be all over the news "gunslinger maims assailant with his quick draw"

I don't know how practical it'd be, but I think it'd be cool for a future version to have the same folding left/right charging handle as the g36

@MiddletonMade3D

2 жыл бұрын

Oh man I completely agree. I might have a few ideas to incorporate that idea into but on the hot pocket it was overly complicated to do so. I DID have that in the infancy of this design but it quickly became an issue

How you diong?.Yeah~that is outstanding view. Middleton! 🤠

@MiddletonMade3D

2 жыл бұрын

Thank you!

I’m gonna make hot pocket soon 😂🔥

@MiddletonMade3D

2 жыл бұрын

Hell yeah! Let me know what you think!

Refuge medical is amazing kits pre set up and the guy that makes them is great and it's all usa made. As for the print I'm looking at using a Springfield XD what modifications if any will it require for use?

@MiddletonMade3D

Жыл бұрын

I haven't tried the XD myself so I'm not exactly sure but it should work together right out of the box. The only modification you may need to make is the charging handle height if it doesn't engage the rear site. If you can get a set of suppressor height sites, that will also greatly help

North American Rescue is awesome if you get on their email list for sales

@MiddletonMade3D

2 жыл бұрын

I'll take a look! Thank you for the recommendation. Going to get kitted soon!

@MrViramont

2 жыл бұрын

I second North American Rescue. Their ifaks are super simple and minimal.

@MiddletonMade3D

2 жыл бұрын

Browsing their site now 👀

War Poet society has a neat ankle kit if you're into that...I think they sell other stuff as well

@MiddletonMade3D

2 жыл бұрын

I'd want to keep anything on a marked kit and off my leg, but I'll definitely check them out regardless! Thanks for the suggestion!

Greetings, it will work with the sig p228

That’s is 🔥🔥🔥

@MiddletonMade3D

2 жыл бұрын

🐸🚀⚡💦

Should I try A or B for a glock 19? Thanks! Awesome work here sir this design is amazing.

@MiddletonMade3D

Жыл бұрын

Thank you! You'll want to use the one that's as far forward as possible. With Glock, you may need to trim the key down to fit your gun specifically. I don't have a Glock to model off of but there ARE other people who have made keys to fit them specifically, but they haven't been shared with me

Since the Beretta M9 has an open slide, will this be incompatible?

@MiddletonMade3D

Жыл бұрын

It's more if the handgun has a rail on it or not. If theres a rail and you can get the body to jive with the sights, should be good The external safety MAY not fit.

I really want to print this. Will it work with the Taurus TX22?

@MiddletonMade3D

2 жыл бұрын

As long as it has a bottom rail and the charging handle can touch a rear sight, you should be g2g!

I know you said S&W will work but can it fit a SD9VE? Wanna know before I print it, cheers!

@MiddletonMade3D

Жыл бұрын

It should, but I haven't tried myself. The charging handle will need to be modified to fit the slide, but the step file is included.

ASA TECHMED is an great source for cheap medical components to make your own IFAK or have a few premade kits and is cheap cost and good quality. I take their equipment out with me on wildland fires and have unfortunately had to use it on occasion and it preformed great every time.

@MiddletonMade3D

Жыл бұрын

I'll need to grab something from them then!

I know I’m almost a year late on this, but I’d recommend checking out Refuge Medical for your medical supplies. 100% American made stuff, based outta Oklahoma

@MiddletonMade3D

Жыл бұрын

Never too late for good recommendations!

by chance does the orientation matter? trying with ender 3 and it has to be at 45 degree angled to fit on buildplate

@skyroboss

Жыл бұрын

also what print settings i know 10+ walls but what about bottom and top layer amonts?

@MiddletonMade3D

Жыл бұрын

Orientation isn't super important for the body, just the mount. As far as walls and such, I usually do 6 for top and bottom, although it's not terribly important for this particular model.

Having an issue. I printed this to use with an m&p 2.0 it all fits well but the slide rack mechanism isn’t quite tall enough. Also I noticed it has a decent amount of flex to it. Should I extend that mechanism down to touch the top of the slide to make it more solid? Is that how it is meant to fit?

@MiddletonMade3D

16 күн бұрын

The step file is included so you can measure the distance between the top of the slide and the bottom of the handle and extrude the handle down almost that distance. That should make it a hell of a lot more refined for you.

@PoorManGarage

16 күн бұрын

@@MiddletonMade3D yup I added about 4.5mm to the charging body height so it rests on the top of the slide now. Much more solid feeling

What cheap red dot is that? Feyachi? Thinking of using it on mine chambered in 40 s&w lol

@MiddletonMade3D

Жыл бұрын

LMAO. yes actually!

@nextlvlroy

Жыл бұрын

@@MiddletonMade3D I like the hot pocket! Tho I haven't tested it out, and I did have to modify the charging handle to make it longer on the bottom to catch my non-suppressor height sights. I have it on a g27, which I would recommend not to use it on since there ends up being more mass on the back since the front rails of the gun are so short due to the subcompactness of the gun, so I have to squeeze the top of the hot pocket and the gun together so that the gun doesn't slide down and not get caught by the charging handle. I wish I could do something about the front to accomodate the g27 more, but I lack the cad skills for that. Good thing is it's universal.

Is even mentioning coupon codes for optics verboten in KZread comments?

@MiddletonMade3D

2 жыл бұрын

You know, I'm not sure. I never really see that down in the comments on anyone else's videos so I'm going to say probably a no go unless it's a plain text. Feel free to send me a DM on Instagram if you ever need to connect with me though.

Will the CZ P07 fit as is?

@MiddletonMade3D

2 ай бұрын

I think so, however, there are multiple keys and Trojan handles. The step file for each is included so you can take a measurement and actually modify to fit yours perfectly

hi what material is it printed in

@MiddletonMade3D

Ай бұрын

Just PLA+

Is this posted anywhere? I really like it

@MiddletonMade3D

Жыл бұрын

Feel free to visit my website for more info. Can't tell people where on YT

@AlmostCool_

Жыл бұрын

@@MiddletonMade3D that was all the guidance I needed, thanks a bunch

@MiddletonMade3D

Жыл бұрын

You're absolutely welcome!

Where can i find the files???

@MiddletonMade3D

Жыл бұрын

I can't advise on file locations here on YT but for info on everything, visit my website.

Al Gore's Rhythm!

@MiddletonMade3D

2 жыл бұрын

All just cool sht I found on Epidemic sounds. Haha!

@CraftBuilt

2 жыл бұрын

@@MiddletonMade3D its a reference to The Armed Scholar here on YT. He always says to drop a comment to fuel the algorithm (or Al Gores rhythm!)

@MiddletonMade3D

2 жыл бұрын

@@CraftBuilt oh yes! Futurama reference originally right? Lmfao

Does a or b work w a glock 45

@MiddletonMade3D

2 жыл бұрын

Hey there, reportedly gen 5 is wider than usual and unfortunately will not fit.

little bit dangerous, the left hand passed many times in front of the barrel when trying to solution missfires

@MiddletonMade3D

Жыл бұрын

It may look that way from the camera angle, but the hand stays out from in front of the muzzle at all times. The grip is encouraged for keeping your hands clear of the barrel.

@didierratsiraka916

Жыл бұрын

@@MiddletonMade3D i got you, how about the charging handle? is it usefull?

North American rescue for first aid.

@MiddletonMade3D

Жыл бұрын

I still haven't found anything I like so I'll check them out today

Is this compatible with taurus g3.?

@MiddletonMade3D

Жыл бұрын

Not sure, but should be with the right charging handle!

@ThorDoja420

Жыл бұрын

I've printed everything now just trying to figure out the charging handle situation

@MiddletonMade3D

Жыл бұрын

The step is included so you can measure the distance between the top of your slide and the charging handle, and add the difference to the file. Perfect fit.

totally true!!! ATF always be changing their piece of shit regulations

@MiddletonMade3D

2 жыл бұрын

I think Katy Perry did a song about them "hot then cold, yes then no, in then out, something something" lol

Glock 26 version? Gen 4?

@MiddletonMade3D

Жыл бұрын

Glocks are odd with their rail, but if the right key is used, yes.

bro the background music is awful

@MiddletonMade3D

Жыл бұрын

True

@lilbeag6148

Ай бұрын

I enjoy it

MedicalOutfitters run by Skinnymedic here on YT can help with the medical gear you're looking for!

@MiddletonMade3D

2 жыл бұрын

Baller! I'll add them to a binary and check it out. Thanks for the recommendation!