I spent all weekend trying to get this SRL Mesh into my Shoei GT Air II. No success. Your video helped by showing the antennae installation and I will give it another shot before returning the unit.
@damikedaevil458216 күн бұрын
What did you the with the air filter? Did you reinstall the flap. Or was it still in? I am trying to go back to original as well.
@allandrake442618 күн бұрын
Epic !
@petreispir195229 күн бұрын
Mulțumesc prietene pentru videoclip! Mi-a fost de mare ajutor!👍🤟🏍️
@tinman778129 күн бұрын
Most unbearably noisy helmet I have ever owned! 6D is like being permently stuck in a wind tunnel, even with plugs in. I'm trying to find why. Everything looks pretty cool, except the visor doesn't seem to seal 100% around the rear/sides. Perhaps wind is slipping in here. I'll have to sell it on if I can't figure it out. Bought a hjc 70 - it feels silent compared to 6D.
@devineliason84Ай бұрын
I run 6D for motocross and I’ve had to test it out multiple times and I’m glad to say the Omni directional system works very well
@ontwowheels6479Ай бұрын
That is actually really good to hear that the system works. Thank you for sharing that with everyone.
@stevepereira3672Ай бұрын
Then run the servo eliminator
@stevepereira3672Ай бұрын
Nevermind I have it right if u leave it locked on down position it runs like shit till u hit 8k if u leave it all the way up it's awesome
@stevepereira3672Ай бұрын
It's currently locked in the str8 up position
@stevepereira3672Ай бұрын
Hey man I took the servo out which position should I leave the valve locked on
@dewaynecummings5210Ай бұрын
I went to Sena Motorcycles and it said the web site is no longer available?
@almohandskhaild2 ай бұрын
what is the different between this fan and Milwaukee-Eight Oil Cooler Fan
@ontwowheels64792 ай бұрын
This is that fan. It is available from HD.
@almohandskhaild2 ай бұрын
@@ontwowheels6479 is this fan is worth it to control the heat in the bike
@user-zq3ih2xm4m2 ай бұрын
Please, I also own a BAIC 929, and there is a malfunction in the piece responsible for moving the wires. Is it possible for me to cancel the gate and install another piece that is closed on the side so that the four pipes are open with each other and there will be no error or imbalance between them through the gate?
@MsDenver23 ай бұрын
I’m sorry but how do you know the 6D is safe , made in china?????👎
@TannerBobbitt2 ай бұрын
6D is made in America.
@MsDenver23 ай бұрын
I haven’t seen any tests being done so how do I know it’s safe
@krisross75933 ай бұрын
Does this work with first generation Neotech II?
@ontwowheels64793 ай бұрын
I do not know.
@johnbecker80374 ай бұрын
I’m that poor guy but your commentary is absolutely hilarious 😂😂😂 immediately subscribed keep making videos man!
@mid.bike.crisis5 ай бұрын
Great video bro! I’ve just rebuilt my 2002 954 and also couldn’t find any info on this. A great help, thanks. 🙏
@patrickjones82816 ай бұрын
God just put it on the damn bike....all this yadda yadda yadda
@ontwowheels64796 ай бұрын
😂 deep breath and relax. It’s gonna be ok. We all get anxiety at times.
@patrickjones82816 ай бұрын
U suck
@patrickjones82816 ай бұрын
U suck
@SQUID_Road_Glide6 ай бұрын
Good stuff. Yes, a throttle body, and manifold is an important addition to the “Modified Stage II”. Along with the cam plate/pump/tappets/tappet cuffs/push rods/Timken bearing/Power Vision/ and of course a killer cam. I’m running a Woods 22XE on my 2020 Fat Boy and came to your video because I decided I should have added a manifold. I’m going follow my initial instincts this time and dump a Thunder Max on my Road Glide 107 to S&S 129 build. Please don’t edit out to much because each teaches what to do as well as what not to do. Great video! ET1(SS/SW/MTS) US Navy, Ret.
@geoffshepherd21087 ай бұрын
Great video Mate. I could not have installed my system without your video explanation. Well done and thanks. Cooee from Australia. Ride safe.
@i2ambler20027 ай бұрын
How did you get those cheek pads on so easily? I have been trying for like an hour and cannot for the life of me get them fitted
@ontwowheels64797 ай бұрын
Start at the back or rear most mounting point and go forward.
@i2ambler20027 ай бұрын
@@ontwowheels6479 Yeah, I finally got it after trying that method for about an hour.. I dunno why, it was very stubborn!
@bangbangbikergang50527 ай бұрын
How the heck do you not have more views on this. I too have a Shoei 1400 and a NEOTEC II. I'm always looking for a alternative to Shoei just so i'm not a Shoei fan boy. My local shop guy sells 6d and told me about how they are part of the nfl helmet make. You kinda made it look cheap at a expensive price. I think im going to try the Arai. Cheers and great video.
@ontwowheels64796 ай бұрын
Thank you for your kind words. After riding with the 6D for an entire season I still maintain that it is not a bad helmet but I probably won’t buy another one. Thanks and safe riding to you.
@frost27227 ай бұрын
Weird comment from BretGash but anyway. I like this comparison I'm a Shoei guy but have always been interested in the 6D's tech. It's hard to beat Shoei in terms of quality they just make great helmets period. I picked up a 6D for the first time at a local store and didn't think they felt too bad in terms of quality, But I didn't compare them directly to Shoei. In terms of safety it seems hard to dispute something that can soften the impacts like that. Snell seems a bit outdated and too hard in terms of what leads to concussions. Have you been using both?
@ontwowheels64797 ай бұрын
I retired my Shoei as it’s over 6 years old. I buy a new lid every 6 years no matter what. The 6d is not horrible but unless they improve or lower their prices I won’t buy another one. The one thing I cannot stand is the visor on it. To me, the visor is just unacceptable. Pretty much in agreement with you! Glad the video was helpful.
@frost27227 ай бұрын
Yeah you're right the price is steep. Even on sale you're looking at 600 bucks give or take for the 6D. I hope Shoei does something similar in terms of impact technology maybe the MEDS system they have for the offroad helmet can trickle its way into the street side. Then we'll have the best of both worlds and almost a no brainer no pun. Thanks bro !!!@@ontwowheels6479
@tinman778129 күн бұрын
Visor is rubbish.
@BretGashDJBFG8 ай бұрын
Sounds to me that because the 6D wasn't just like the SHOEI that it's not as good. Your next helmet should ve a SHOEI
@ontwowheels64798 ай бұрын
Ok.
@ewetho9 ай бұрын
New phones and other devices require updates for compatibility and occasionally a new feature or two could be nice
@brianlaney82999 ай бұрын
Could you tell me the torque value on the 3 throttle body screws? Thanks
@xxxyz7219 ай бұрын
Sound quality after the faff of install is impressive though :).
@xxxyz7219 ай бұрын
Just fitted this kit to my gt-air2. Absolute pain in the arse getting the mesh antennae inserted into the lid. Trying to cram it in on the left side was a nightmare as it just wouldn’t go between the inner and outer lid layers. Got it in there in the end though the wires got in the way of the cheek pads…. Faffed about but managed it in the end….
@user-gz4bn8rj6z10 ай бұрын
By far the best installation tutorial - thank you
@infeedel770610 ай бұрын
What I'm trying to tell you is "it comes with some recycling". GOLD Thanks from Australia mate!
@ronicard10 ай бұрын
Most of it was pretty straight-forward but i wasn't grasping the antenna concept, even looking at Sena's installation diagrams. Your video helped me to figure it out so much thanks. And ride safe!
@markhartung651310 ай бұрын
There is a tool in the box when you purchased the helmet.
@Arizona_Vineyard10 ай бұрын
I have a sportster. I ride 100% on surface roads. It’s been a blazing 115 ever day for the summer. I ride about 45 minutes home and I can feel the heat from the bike, the road and all the cars around me. I’ve got my helmet gloves backpack long sleeve shirt on. My bike rpms drop to 980. I ride it hard and yet to see overheated temperatures. I’ve gotten home and took temperatures with a laser temperature gun and and I took a food thermometer and stuck into the oil with engine shut off. Still at the operating temperature you should see. If you run it too cool you will tell the ecm to put more fuel in to get it warmer temperature. Bore wash incurrs
@ontwowheels647910 ай бұрын
The factory fan won’t turn on until oil reaches operating temperature. This fan is more designed for stop and go city traffic.
@geraldgoodiii699310 ай бұрын
Needs a set of tab mufflers Go for the medium baffle if u don’t want it too loud but will come up some when u get on it Has deeper tone than the zombie baffle I just did the 447 SE cam 2 weeks ago. I’m actually blown away (low expectations from the SEPST and mild cam and catted head pipes .. first new bike wanted to keep Warranty on SOMETHING) How much power u make ? My 107 did 93hp/111tq
@joseoviedo452911 ай бұрын
thanks for the install video, I wasn't sure about getting this unit for mostly music since I don't really make calls while riding and since its kinda pricey but I think its almost a shame not to get it when the helmet was designed so perfectly to incorporate it. Plus, I don't really like when helmets have the little Bluetooth jawbone device, seems super dated and too much like cab drivers who always have an ear piece in haha
@GermaineErnst11 ай бұрын
Does siri work with the sena?
@ontwowheels647911 ай бұрын
It does. I don’t know how to activate Siri from the headset but if I activate Siri from my phone I can say stuff like play music and it works.
@garybaldwin106111 ай бұрын
Without an oil temp gauge how do you know its any better?
@ontwowheels647911 ай бұрын
I have the oil temp dip stick. It helped, minimally, but it did help.
@johnporter250811 ай бұрын
Did u have to retune after install
@ontwowheels647911 ай бұрын
Yes but I already had the screamin eagle tuner. I probably could have gotten away with not tuning for a while. It’s a minimal change but I do believe it has more power than it did based on feel.
@ragetobe Жыл бұрын
My Helmet Sena unit does not have that dongle, it just uses a micro usb.
@ontwowheels6479 Жыл бұрын
Interesting. Is it a different model?
@ragetobe Жыл бұрын
@@ontwowheels6479 I've had it for 3 years perhaps that dongle is an addition or revision.
@papabearbiking Жыл бұрын
Thanks for the video, it is very useful. How is the audio quality of the mic? Can the others hear you well? Does it work with Cardo system? Can you use it to record audio on your phone?
@MotorDude95 Жыл бұрын
Thank you for very straightforward installation tips!
@Alexey5887 Жыл бұрын
Thank You very much bro
@ontwowheels6479 Жыл бұрын
You are welcome my dude
@johnbellizzijr.2351 Жыл бұрын
what kind of tuner did you use for the cam and intake install???
@ontwowheels6479 Жыл бұрын
I used the screamin eagle tuner. If you’re under warranty it’s the one man. And it’s not a horrible tuner.
@1motorandy Жыл бұрын
Your video was the only one I found that showed the FM antenna installation. I must have watch 10 before finding yours. It was so helpful, thank you!
@flyingdutchy01 Жыл бұрын
i believe my cbr600rr has the same calipers so i'll use your video as a guide to rebuild mine. thank you so much
@TheMisterNyceGuy Жыл бұрын
Does it use the factory cover?
@ontwowheels6479 Жыл бұрын
It does. Which is why I wanted it, to retain the stick appearance.
@stevenwaller1929 ай бұрын
I experienced breaking my K&N filter as well. Bummer. Wish K& N had used the metal sleeves like Harley stock filter
@paulhewson4600 Жыл бұрын
Hey OTW, I believe after watching several videos you are the only one that I have seen that replaced the Manifold to head gaskets,, I myself can't understand why more people don't , that is a known area for leaks,,,good video. I didn't catch if you did or not but these things need to be cleaned before install , a lot of material left on the insides.
@ontwowheels6479 Жыл бұрын
I did clean and smooth this one out. I didn’t do a port and polish or anything like that but I did clean up the casting mess. The s&s one was even worse casting junk.
@jimf1450 Жыл бұрын
Bc usually the original flange gasket are still usable.
Пікірлер
I spent all weekend trying to get this SRL Mesh into my Shoei GT Air II. No success. Your video helped by showing the antennae installation and I will give it another shot before returning the unit.
What did you the with the air filter? Did you reinstall the flap. Or was it still in? I am trying to go back to original as well.
Epic !
Mulțumesc prietene pentru videoclip! Mi-a fost de mare ajutor!👍🤟🏍️
Most unbearably noisy helmet I have ever owned! 6D is like being permently stuck in a wind tunnel, even with plugs in. I'm trying to find why. Everything looks pretty cool, except the visor doesn't seem to seal 100% around the rear/sides. Perhaps wind is slipping in here. I'll have to sell it on if I can't figure it out. Bought a hjc 70 - it feels silent compared to 6D.
I run 6D for motocross and I’ve had to test it out multiple times and I’m glad to say the Omni directional system works very well
That is actually really good to hear that the system works. Thank you for sharing that with everyone.
Then run the servo eliminator
Nevermind I have it right if u leave it locked on down position it runs like shit till u hit 8k if u leave it all the way up it's awesome
It's currently locked in the str8 up position
Hey man I took the servo out which position should I leave the valve locked on
I went to Sena Motorcycles and it said the web site is no longer available?
what is the different between this fan and Milwaukee-Eight Oil Cooler Fan
This is that fan. It is available from HD.
@@ontwowheels6479 is this fan is worth it to control the heat in the bike
Please, I also own a BAIC 929, and there is a malfunction in the piece responsible for moving the wires. Is it possible for me to cancel the gate and install another piece that is closed on the side so that the four pipes are open with each other and there will be no error or imbalance between them through the gate?
I’m sorry but how do you know the 6D is safe , made in china?????👎
6D is made in America.
I haven’t seen any tests being done so how do I know it’s safe
Does this work with first generation Neotech II?
I do not know.
I’m that poor guy but your commentary is absolutely hilarious 😂😂😂 immediately subscribed keep making videos man!
Great video bro! I’ve just rebuilt my 2002 954 and also couldn’t find any info on this. A great help, thanks. 🙏
God just put it on the damn bike....all this yadda yadda yadda
😂 deep breath and relax. It’s gonna be ok. We all get anxiety at times.
U suck
U suck
Good stuff. Yes, a throttle body, and manifold is an important addition to the “Modified Stage II”. Along with the cam plate/pump/tappets/tappet cuffs/push rods/Timken bearing/Power Vision/ and of course a killer cam. I’m running a Woods 22XE on my 2020 Fat Boy and came to your video because I decided I should have added a manifold. I’m going follow my initial instincts this time and dump a Thunder Max on my Road Glide 107 to S&S 129 build. Please don’t edit out to much because each teaches what to do as well as what not to do. Great video! ET1(SS/SW/MTS) US Navy, Ret.
Great video Mate. I could not have installed my system without your video explanation. Well done and thanks. Cooee from Australia. Ride safe.
How did you get those cheek pads on so easily? I have been trying for like an hour and cannot for the life of me get them fitted
Start at the back or rear most mounting point and go forward.
@@ontwowheels6479 Yeah, I finally got it after trying that method for about an hour.. I dunno why, it was very stubborn!
How the heck do you not have more views on this. I too have a Shoei 1400 and a NEOTEC II. I'm always looking for a alternative to Shoei just so i'm not a Shoei fan boy. My local shop guy sells 6d and told me about how they are part of the nfl helmet make. You kinda made it look cheap at a expensive price. I think im going to try the Arai. Cheers and great video.
Thank you for your kind words. After riding with the 6D for an entire season I still maintain that it is not a bad helmet but I probably won’t buy another one. Thanks and safe riding to you.
Weird comment from BretGash but anyway. I like this comparison I'm a Shoei guy but have always been interested in the 6D's tech. It's hard to beat Shoei in terms of quality they just make great helmets period. I picked up a 6D for the first time at a local store and didn't think they felt too bad in terms of quality, But I didn't compare them directly to Shoei. In terms of safety it seems hard to dispute something that can soften the impacts like that. Snell seems a bit outdated and too hard in terms of what leads to concussions. Have you been using both?
I retired my Shoei as it’s over 6 years old. I buy a new lid every 6 years no matter what. The 6d is not horrible but unless they improve or lower their prices I won’t buy another one. The one thing I cannot stand is the visor on it. To me, the visor is just unacceptable. Pretty much in agreement with you! Glad the video was helpful.
Yeah you're right the price is steep. Even on sale you're looking at 600 bucks give or take for the 6D. I hope Shoei does something similar in terms of impact technology maybe the MEDS system they have for the offroad helmet can trickle its way into the street side. Then we'll have the best of both worlds and almost a no brainer no pun. Thanks bro !!!@@ontwowheels6479
Visor is rubbish.
Sounds to me that because the 6D wasn't just like the SHOEI that it's not as good. Your next helmet should ve a SHOEI
Ok.
New phones and other devices require updates for compatibility and occasionally a new feature or two could be nice
Could you tell me the torque value on the 3 throttle body screws? Thanks
Sound quality after the faff of install is impressive though :).
Just fitted this kit to my gt-air2. Absolute pain in the arse getting the mesh antennae inserted into the lid. Trying to cram it in on the left side was a nightmare as it just wouldn’t go between the inner and outer lid layers. Got it in there in the end though the wires got in the way of the cheek pads…. Faffed about but managed it in the end….
By far the best installation tutorial - thank you
What I'm trying to tell you is "it comes with some recycling". GOLD Thanks from Australia mate!
Most of it was pretty straight-forward but i wasn't grasping the antenna concept, even looking at Sena's installation diagrams. Your video helped me to figure it out so much thanks. And ride safe!
There is a tool in the box when you purchased the helmet.
I have a sportster. I ride 100% on surface roads. It’s been a blazing 115 ever day for the summer. I ride about 45 minutes home and I can feel the heat from the bike, the road and all the cars around me. I’ve got my helmet gloves backpack long sleeve shirt on. My bike rpms drop to 980. I ride it hard and yet to see overheated temperatures. I’ve gotten home and took temperatures with a laser temperature gun and and I took a food thermometer and stuck into the oil with engine shut off. Still at the operating temperature you should see. If you run it too cool you will tell the ecm to put more fuel in to get it warmer temperature. Bore wash incurrs
The factory fan won’t turn on until oil reaches operating temperature. This fan is more designed for stop and go city traffic.
Needs a set of tab mufflers Go for the medium baffle if u don’t want it too loud but will come up some when u get on it Has deeper tone than the zombie baffle I just did the 447 SE cam 2 weeks ago. I’m actually blown away (low expectations from the SEPST and mild cam and catted head pipes .. first new bike wanted to keep Warranty on SOMETHING) How much power u make ? My 107 did 93hp/111tq
thanks for the install video, I wasn't sure about getting this unit for mostly music since I don't really make calls while riding and since its kinda pricey but I think its almost a shame not to get it when the helmet was designed so perfectly to incorporate it. Plus, I don't really like when helmets have the little Bluetooth jawbone device, seems super dated and too much like cab drivers who always have an ear piece in haha
Does siri work with the sena?
It does. I don’t know how to activate Siri from the headset but if I activate Siri from my phone I can say stuff like play music and it works.
Without an oil temp gauge how do you know its any better?
I have the oil temp dip stick. It helped, minimally, but it did help.
Did u have to retune after install
Yes but I already had the screamin eagle tuner. I probably could have gotten away with not tuning for a while. It’s a minimal change but I do believe it has more power than it did based on feel.
My Helmet Sena unit does not have that dongle, it just uses a micro usb.
Interesting. Is it a different model?
@@ontwowheels6479 I've had it for 3 years perhaps that dongle is an addition or revision.
Thanks for the video, it is very useful. How is the audio quality of the mic? Can the others hear you well? Does it work with Cardo system? Can you use it to record audio on your phone?
Thank you for very straightforward installation tips!
Thank You very much bro
You are welcome my dude
what kind of tuner did you use for the cam and intake install???
I used the screamin eagle tuner. If you’re under warranty it’s the one man. And it’s not a horrible tuner.
Your video was the only one I found that showed the FM antenna installation. I must have watch 10 before finding yours. It was so helpful, thank you!
i believe my cbr600rr has the same calipers so i'll use your video as a guide to rebuild mine. thank you so much
Does it use the factory cover?
It does. Which is why I wanted it, to retain the stick appearance.
I experienced breaking my K&N filter as well. Bummer. Wish K& N had used the metal sleeves like Harley stock filter
Hey OTW, I believe after watching several videos you are the only one that I have seen that replaced the Manifold to head gaskets,, I myself can't understand why more people don't , that is a known area for leaks,,,good video. I didn't catch if you did or not but these things need to be cleaned before install , a lot of material left on the insides.
I did clean and smooth this one out. I didn’t do a port and polish or anything like that but I did clean up the casting mess. The s&s one was even worse casting junk.
Bc usually the original flange gasket are still usable.