Пікірлер

• 
  @MrClean-gv5mhКүн бұрын

  Were can I get heat wire from so I can connect to the controller?

• 
  @louiedee2798 күн бұрын

  My screen is blank 5GWiFi 8 Core Car Stereo for Jeep Compass Patriot 2010-2016 Android12 48EQ 10in IPS Touch Screen Head Unit with Wireless Carplay Android Auto DSP Bluetooth SWC Backup Camera(10.1" 2+32)

• 
  @garyvoss815212 күн бұрын

  Thank you very much! This worked. I used adhesive laminate and it worked OK but is a little fiddly if you get a bubble! Just remember which way the plastic 'contact' its inserted - it fell out and took some trial and error to get it the right way.

• 
  @TTM-GEB24 күн бұрын

  Well done video 😊

• 
  @drbassface25 күн бұрын

  Man, I installed this system in a tall closet. Used 16 inch deep shelves. Moved out and got divorced. That $160,000 house now lists for $455,000. I really miss that closet I built! lol Cost around $1,800 in materials.

• 
  @user-gh9im7tt9y28 күн бұрын

  Question. I have a F150LA yamaha engine. my speedometer was acting up. I did clean out the inlet hole and blew back through the hole, it seems like it should work. How did the speedometer work before if I have not installed the speed sensor? Where does the black nipple go to? It was all zip tied>

• 
  @mik1370029 күн бұрын

  hello I carried out exactly the same assembly in the video but nothing is displayed on the speed fuel (yamaha F70 engine). Do you have an idea of ​​the problem?

• 
  @Condor1970Ай бұрын

  The problem with spray foam, is that the material is basically a cured polymer that is actually a solid material. That solid material is not meant to dampen sound. The best way to dampen sound, would be to have a rubberized coating on the bottom side of the panel, to subdue some of the reverberation of the metal. Add small air gap to a install a radiant barrier, then a layer of foam or even better some fiberglass insulation of sorts would make a big difference over just a solid layer of poly spray foam.

• 
  @keithbeasley5862Ай бұрын

  Daniel,...just found you recently, wish I'd discovered your channel sooner, much appreciate your sharing experiences in this community. I'm working on my 20' v nose cargo at the moment. Mini Split is my direction and plan on installing this inside the trailer, well vented, dedicated box in the interior of the nose of the trailer, I'm curious of some of your thoughts and objections to this if any. I'm trying to head off or address challenges as to keep the trailer as stealth as possible, all things discreet and hidden. Thank you so much for any input, stay well!

• 
  @danielmid6022Ай бұрын

  @@keithbeasley5862 hey thx for the comment! I like the idea, actually wanting to do the same thing in a Van conversion. Don't see why it wouldn't work. I built a tear drop camper 20 years ago and did this with a window unit, I did have to add a fan inside the AC box to help pull the heat out, it worked excellent. Please let me know how your build progresses.

• 
  @keithbeasley5862Ай бұрын

  @@danielmid6022thanks Daniel, I’ll do that…appreciate the response.

• 
  @georgemlongoti5443Ай бұрын

  I did that and it was just fine till recently is now making funny noise I don't know what to do

• 
  @harryyubankАй бұрын

  Awesome vid, 100% real… just got done my yamaha speed tach

• 
  @williamschmaltz7652Ай бұрын

  Excellent tutorial Danny.

• 
  @charlesthomas3791Ай бұрын

  Thanks!! Great video. The glue on my 20 year old guages was way harder to remove than yours, but I got it done. I did both at the same time and inadvertently switched the LCD's. I didn't know they were specific. Once I switched them back, the tach worked, but the speedo gave an E1 error on startup. I had to replace the LCD and now all good. Still need to work on the crazing but I'm happy. Now that I can see the guages I can see the trim sender needs to be replaced.

• 
  @danielmid6022Ай бұрын

  Thanks for the comment, glad u got them working!!

• 
  @paulhawley1632 ай бұрын

  How did you do you vent line and material did you use. Looking for the outside louvre and connection when you vented it out the wall

• 
  @erichansen11022 ай бұрын

  This worked like a charm on 22 year old gauges. Just saved almost $600!

• 
  @mv312862 ай бұрын

  Camera sucks

• 
  @user-bb4vm2cm6x2 ай бұрын

  Microphone

• 
  @mblake04202 ай бұрын

  What a hack lol dang

• 
  @whitegoodman74652 ай бұрын

  Looks like its vinyl.

• 
  @onetwo98692 ай бұрын

  Best info so far, thank you sir, is there any trouble with electrical serge

• 
  @danielmid60222 ай бұрын

  Hi. No issues so far

• 
  @antoinenewton22372 ай бұрын

  Do your controls to the steering wheel that controls volume crusie control ,stop working

• 
  @MindBodyMuse2 ай бұрын

  FYI - struts should be set to collapse down ward like your 10” struts (the opposite of your 6” struts). This stops the oil from drying out in the struts. :)

• 
  @mudassarkmmk2 ай бұрын

  Does the strut itself pull the door soft close or is it the hinges?

• 
  @danielmid60222 ай бұрын

  The struts do

• 
  @gaming-world71832 ай бұрын

  Thanks

• 
  @featherweight19103 ай бұрын

  Thanks for the vid. Installed on my F150; took 20 mins and super easy!

• 
  @marocucuk11773 ай бұрын

  Thanks man you help me alot,my gauge now looks like new

• 
  @Xray.713 ай бұрын

  I just got 4” action series, do you use the existing transom holes to mount the plate? Did you by chance reach out to Bob’s about a longer relay harness?

• 
  @danielmid60223 ай бұрын

  Hi! yes I used the existing holes. No I didn't contact Bob's.

• 
  @Xray.713 ай бұрын

  @@danielmid6022 Ok right on! I got an east cape fury (similar to a hells bay skiff) I’m assuming that 9’ harness won’t be long enough either…..Thanks for putting out the video. It’s very helpful compared to any modern day instructions!

• 
  @relojdepie3 ай бұрын

  Is the steerimg controls working?

• 
  @scrogathon3 ай бұрын

  Instead of using the smaller tank in the front, would you be able to plumb the toilet to use the larger gray tank? Reason i ask is Im building out an almost identical trailer (legend 7x19 FTV). Great work btw.

• 
  @danielmid60223 ай бұрын

  I'm not sure if rv toilets can utilize regular plumbing because of the amount of water they use to flush... But I'm not an expert.

• 
  @scrogathon3 ай бұрын

  @@danielmid6022 thank you for the reply.

• 
  @scrogathon3 ай бұрын

  @@danielmid6022 I did not consider that when brainstorming. Direct to the tank is probably the best bet.

• 
  @scrogathon3 ай бұрын

  Do you still have this camper?

• 
  @LUIS-NASA3 ай бұрын

  Olá, sabe me dizer onde o fio branco é ligado? O meu está desligado e não sei qual é a função dele no painel.

• 
  @AaravMdliar3 ай бұрын

  Hey man love ur videos!! Just wanted to know if it is better to install a sub in a factory stereo or android headunit. Btw I have a mitsubishi pajero with a factory Rockford soundsystem.

• 
  @larryw50833 ай бұрын

  I really found this clear, concise and helpful! I need your help with reinstalling my Yam speedo/fuel gauge which is same as yours. Behind the console, I found the corresponding Yellow, Blue and Red wires and connected them. That leaves me with 2 Black and 1 White wires which I cannot identify a match. Are all 3 required? Can you tell me what their function is? You mention that Black is Ground, what about the 2nd Black wire? Any help would be greatly appreciated. Thanks for the great videos.

• 
  @danielmid60223 ай бұрын

  Hi, thx for the comment! I'm sorry I just can't remember where each wire hooks up. It's been a while and I no longer have the same motor or gauges. Hope u are able to get it figured out, sorry I'm not more help

• 
  @davidpesek56213 ай бұрын

  What is the yellow screen behind the display screen. Is that the backlight?

• 
  @functionalvanconversion42844 ай бұрын

  Nice work!

• 
  @djadrian93184 ай бұрын

  Everything works on my Android radio that I just bought except it will not hold the radio station memories and it was full plug-and-play I didn't have to mess with any except for one wire which is the backup camera wire do you have any suggestions what could be happening

• 
  @owulokingsley24054 ай бұрын

  Thanks Dan, my back camera flipped upside down whenever I put the car on reverse: kindly help me out with solutions, thanks 🙏

• 
  @jefferymyre88684 ай бұрын

  Did you have a problem with gasses coming into the inside without a p trap?

• 
  @CyberCuban4 ай бұрын

  Yep it work!! I got may done, it does take time and patience but got them done and they are like new.

• 
  @W0BNC4 ай бұрын

  Although I have a 12v version I'm using to power RV tank heaters I am using to keep the LiFePO4 batteries warm in the RV, this video was PERFECT for helping me get it wired correctly. Thank you!

• 
  @maceldolaimy49444 ай бұрын

  thanks for sharing brotha

• 
  @dennissavage33465 ай бұрын

  Can anyone help me connect phone via USB ( it’s greyed out)

• 
  @pontusborgjonsson12465 ай бұрын

  Hahaha wtf are you doing 😂😂😂

• 
  @user-by3vk5ku8r5 ай бұрын

  Hi Daniel My son has just carried out an upgrade on my 2012Mondeo titanium x sport all seemed okay until we tried to adjust the climate control there was no reaction on the touch screen do we need a interface the unit is a Artsxw 9.7 Inch Car Stereo Bluetooth Touch Screen Car Radio For Ford Mondeo MK4 2011-2013 Android 10 Head Unit GPS Sat Nav Support CarPlay Android Auto Wifi 4G Mirror Link TPMS Built-in

• 
  @markbergthold61815 ай бұрын

  So no level sensors?

• 
  @danielmid60225 ай бұрын

  No I didn't put a sensor on it. I do have a kit for it just never installed.

• 
  @user-cx1hb8tj7k5 ай бұрын

  How much again did u spend all together

• 
  @eliyaben92775 ай бұрын

  I'm trying to connect my car sterio wires to the android tablet but unexpectedly I found the cable to which I'm supposed to connect the wires is cut off! Please can you advise me what i should do. Thank you

• 
  @WARRIOR56995 ай бұрын

  Mine has a ticking sound and slight static noise that doesn’t go away how do I get rid of that?? Also key one and key two wire splice to what other wires for the steering wheel controls to work ??? I have the basic GM radio that You’d find in late 2000’s GM vehicle

• 
  @opossumgrylls32755 ай бұрын

  I am concerned that hundreds of pounds of water will bend those aluminum L brackets.

• 
  @Mukawish_PUBG5 ай бұрын

  How much is it?