Пікірлер

• 
  @DIY_BL18 сағат бұрын

  Good job!

• 
  @robertattooart98882 күн бұрын

  how mush $ ? can u make one for me ?

• 
  @josuevaldezdeleon73404 күн бұрын

  waooooo

• 
  @peterdaly23777 күн бұрын

  I built almost the same shed for my shop underfloor vacuum system.The only diferencce was I used rdgid insutation in all the walls. Man what a difference. Great job on you and keep up the good work. Pete

• 
  @charlesshanefelter2339 күн бұрын

  the anti-wobble device is a game changer

• 
  @richardleonis774310 күн бұрын

  Nice work kid👍🏻

• 
  @frederickshipp801311 күн бұрын

  Box your C iron on both sides, that should eliminate the deflection your getting. PS I'm very impressed with the things you are doing, engineering and fabricating. Keep it up, everything should pay off for you if it hasn't already.

• 
  @MaximusPham11 күн бұрын

  I wonder maybe create a pad for the jacks to stand on and remove the wheels as security measure? If I wasn't in an HOA, I would get a trailer too, but I can always borrow one in exchange for a case of beer with buddies.

• 
  @kybble11 күн бұрын

  How much did your modifications reduce your load capacity.

• 
  @EricLS12 күн бұрын

  Man, thievery goes hard where you are apparently

• 
  @onefortheroad229113 күн бұрын

  I’m in the process of moving my bender onto an engine stand and am I glad I watched this video! I was about to cut off the rotating part and just have a plate welded on to bend horizontal, but your idea makes so much more sense to have both options. Great job !

• 
  @brettdore263515 күн бұрын

  Hello. Great stuff. May I ask you what CAD program you used during this video?

• 
  @alekseyale807916 күн бұрын

  офигеть, какой у них порядок на металлобазе... "загнивающий" запад, что тут скажешь...

• 
  @Breezer5616 күн бұрын

  Sure a nice job! That trailer should give you plenty of service.

• 
  @edgardomatos692316 күн бұрын

  well done ,

• 
  @fortheloveofmoney175219 күн бұрын

  Do you know if they have safety locks for the big Tex utility trailers 6x10? If so, where can I purchase them from?

• 
  @math469921 күн бұрын

  Stumbled upon this randomly, browsing the interwebs, had to come on here afterwards, to compliment your work. Trailer looks great, and i totally dig your "lets not drill into this brand new trailer" way of thinking. Fantastic work man 🙏

• 
  @glennnelson327522 күн бұрын

  Great build - absolutely stealing your wooden wall build for our Karavan trailer.

• 
  @ChazzTech10123 күн бұрын

  Nice clean build 😊! GOOD JOB!!!

• 
  @omarsepuan167823 күн бұрын

  Very nice workmanship

• 
  @Fixmesut25 күн бұрын

  Great job brother ! I would like to ask your opinon for other projects that I am working on. How can I keep in touch with you ?

• 
  @EnnTomi125 күн бұрын

  id sleep on it afterwards

• 
  @mo7ametto82226 күн бұрын

  boss the length value in the table its length measure in sketch , How I can get the cut length not original length?

• 
  @richardlee8980Ай бұрын

  Enjoyed your video and learned a lot. Thanks for sharing it with us!

• 
  @gleasonmlАй бұрын

  Great Video! This really helped me build a proper weldment. You mention in the video that the Solidworks file is available for download, but I only see the PDF. Is the Solidworks available somewhere?

• 
  @pawnphilakoune5907Ай бұрын

  Good job brother! I’m looking to get a 4X8 utility trailer and probably do some of these mods.

• 
  @jayinmi3706Ай бұрын

  Had an idea, but I don't know if it would ever come in to play. Since the fingers are different widths, would maybe making the back guide slide side to side be a worthwhile upgrade? Can't think of a specific instance, but I haven't needed a finger brake yet.

• 
  @RathaSochendaАй бұрын

  Yeah I thought about that have it slide on linear guide rails. Left to right.

• 
  @jayinmi3706Ай бұрын

  That's a great idea! I've been leaning toward a Roguefab bender because it can do the vertical orientation, but it's out of my price range at the moment for something I won't use alot. Combining this with the Woodward Fab clone from Amazon might get it in my range.

• 
  @oby-1607Ай бұрын

  One can't install enough locks on a trailer or what is on the trailer. No lock is infallible, so it is better to layer with multiple locks. At least that will slow them down or maybe deter the thief from taking what is yours. It is definitely getting worse out there for people who have no morals.

• 
  @HH-cu2mvАй бұрын

  Where can you buy and how much?

• 
  @RathaSochendaАй бұрын

  You can find it on my website rathasochenda.com/product/heavy-duty-universal-swingout-hinge-kit/

• 
  @jeffreylindenwhite7930Ай бұрын

  Do you have a suggestion for attaching a removable 3/4" plywood to RIGID brand saw horses that have 2x4's for support beams ?!

• 
  @mikypeaАй бұрын

  My trailer was stolen 😢

• 
  @RathaSochendaАй бұрын

  Sorry that happened

• 
  @marcoss4563Ай бұрын

  awesome video, ty!! quick question are you using 3/8 for the table grid ?

• 
  @RathaSochendaАй бұрын

  1/2

• 
  @marcoss4563Ай бұрын

  @@RathaSochenda thickkkkk

• 
  @therealsolo23Ай бұрын

  Love the wheels and color choices.

• 
  @jamesphillips9516Ай бұрын

  Thanks for the upgrades. I have an 8 foot trailer with a single tongue (like your boat trailer) rather than many V types. I have attached a hand crank cable winch to the tongue exactly like your boat trailer. This not only helps with loading, but after loading I use it to hold the tarp down.

• 
  @brennik056 күн бұрын

  I have a 10’ that is also a single tongue. Looking into the best place to attach a winch( help loading a mower etc. that won’t start). Did you weld it on or can it be bolted down. I can’t weld so I’m hoping to be able to bolt something down. Also did you attach yours to the tongue itself or to the trailer frame?

• 
  @dagoekaАй бұрын

  Great job. 👊🏻👊🏻👊🏻

• 
  @johnwayneschaefer8518Ай бұрын

  Rear screw-jack mod is unique ! Solid addition !

• 
  @fichtl500Ай бұрын

  What is the diameter of the steel pipes used? What wall strength?

• 
  @RathaSochendaАй бұрын

  1.75 OD x 1/8 wall

• 
  @fingerlakeslawnАй бұрын

  Are the spacers necessary if the 2x4 vertical sits flush with the rail? I have a 5x8 Karavan same type but I don’t have that little gap with the rail.

• 
  @RathaSochendaАй бұрын

  No if you don’t have a gap

• 
  @fingerlakeslawnАй бұрын

  @@RathaSochenda I was considering using pressure treated plywood with U Bolts or the 6x10 board like you did. I think less wood would be better for weight. I'm not sure if I still need the 2x4 verticals, but they might help keep it sturdy. Otherwise, the top section will only be held by the U bolt at the bottom.

• 
  @aaronblackford981Ай бұрын

  I can’t lie. Don’t like the look overall due to rainfall thoughts. But I don’t know too much for your area. You gave me a couple ideas for my dust collector. You could brand this concept mostly in same way for woodworkers. Many of the small nailers we own are battery now. Lol. Nice job. Ty

• 
  @aaronblackford981Ай бұрын

  I can’t lie. Don’t like the look overall due to rainfall thoughts. But I don’t know too much for your area. You gave me a couple ideas for my dust collector. You could brand this concept mostly in same way for woodworkers. Many of the small nailers we own are battery now. Lol. Nice job. Ty

• 
  @aaronblackford981Ай бұрын

  I love that your dealing with air compressor while using the battery powered nailer. I understand the dichotomy of it. Still funny

• 
  @homemadetoolsАй бұрын

  Excellent press brake. We shared this video (and the first two parts) on our homemade tools forum last week. 😎

• 
  @RathaSochendaАй бұрын

  Thanks hoped it help

• 
  @orion-viikhmernight2748Ай бұрын

  Awesome design brother can design one for my 2006 humvee?

• 
  @RathaSochendaАй бұрын

  Thanks. I just did this for fun

• 
  @Anonymous-ff5wrАй бұрын

  Nice job😊seem like your a Tim Tayler modify it I like it

• 
  @RathaSochendaАй бұрын

  🙏🏽

• 
  @Dzon_JacekАй бұрын

  👍

• 
  @Dzon_JacekАй бұрын

  👍

• 
  @Dzon_JacekАй бұрын

  👍

• 
  @mikem2983Ай бұрын

  Store bought chocks, carabiners and bungees. Wow. I use 2 bricks.

• 
  @RathaSochendaАй бұрын

  🤘

• 
  @johnnytejeda1412Ай бұрын

  Good job, nicely detailed this set up is perfectly explained 👌 definitely interested in building this.

• 
  @RathaSochendaАй бұрын

  Thanks 🙏🏽

• 
  @matthewarnold8538Ай бұрын

  Estate sale got mine for 100dollars needed some repair handy as a pocket on a shirt ❤

• 
  @RathaSochendaАй бұрын

  Nice