Want to build your own Hydraulic Press Brake? Links to the DIY Build Plans: My Website Shop: rathasochenda.com/product/diy-shop-hydraulic-press-brake-digital-build-plans/ or Etsy Shop: rathasochenda.etsy.com/listing/1575803667/diy-shop-hydraulic-press-brake-digital Video Description: How to build a homemade pressbrake. In this video series, I’ll share the process of building out my homemade brake press, which will include a NC control back gauge and limit switches to tell how far the punch die needs to travel down to achieve a desired and repeatable bend angle. Items used in this video: Cyclops Press Brake Tool: instagram.com/cyclopsdesigns/ Vevor Electric Hydrualic Pump: s.vevor.com/bfQh9Q Vevor 30 Ton Cylinder: s.vevor.com/bfQh9M Anti-Wear Hydraulic Fluid: amzn.to/3Lt3YP9 Limit Switch: amzn.to/3qZNw1Z Return Springs: amzn.to/47X0YnM Linear Rail: amzn.to/3L2KLnp Digital Angle Gage: amzn.to/3QZTESt Leveling Caster 2200lb Capacity Set of 4: amzn.to/486WB9U Video Chapters 0:00 - Introduction 0:50 - Why I need a Brake Press for my shop 3:15 - The Goals for this Brake Press System 4:00 - My Shop Brake Press Design in SolidWorks 5:47 - Building a Hydraulic Shop Press H-Frame 10:11 - About the Cyclops Design Brake Press 11:21 - Bending Parts 12:35 - Limit Switch to make repeatable bends 15:04 - Conclusions

This is how a video should start. An introduction, An explanation of the problem to be solved, and a demonstration of how you solved it. Before one cut or weld. I will decide if I want to watch you build it. Well done.

@RathaSochenda

5 ай бұрын

Thank you!

@phillhuddleston9445

4 ай бұрын

Much better than a one minute music video!

This is the most underrated DIY channel so far 😢. Great build buddy !! Can't wait to see part2

@RathaSochenda

9 ай бұрын

Appreciate it!

Damn, I just stumbled upon this channel and it's great. I love when people bridge the gap between engineering design and fabrication themselves. Keep up the great work, man.

@RathaSochenda

9 ай бұрын

Thanks!. Yeah it definitely can be a challenge bridging that gap at times.

That thing is awesome! Great design. 👍

@RathaSochenda

9 ай бұрын

Appreciate it! Stay tune for part 2

Awesome craftsmanship, thanks !!!!

@RathaSochenda

9 ай бұрын

Thank you!

Very impressive project. Well done.

@RathaSochenda

9 ай бұрын

Thanks

Your builds are awesome! So innovative and of the highest quality.

@RathaSochenda

9 ай бұрын

Glad you like them! I try to do my best!

It’s so awesome to see your process. The thought process is top notch 👏🏽🔥

@RathaSochenda

9 ай бұрын

I appreciate that!

Project, videography and dialogue are absolutely top notch ! Fantastic to watch = )

@RathaSochenda

9 ай бұрын

Thank you I’m glad you enjoyed the video. 😎

Nicely done

Excellent job of both design and fabrication. This will be a DIY kit you’ll want to offer.

@RathaSochenda

8 ай бұрын

Thanks. DIY weld kit is in the works for sure

Very clean work. Your very sharp.

@RathaSochenda

9 ай бұрын

Appreciate it!

Very, very nicely done, Ratha! This is phenomenal!!!

@RathaSochenda

9 ай бұрын

Thanks Wolfgang. See you in part 2!

This is the best press brake build I've seen on KZread. Well done!!!

@RathaSochenda

9 ай бұрын

Thank you appreciate it

Awesome job ! Keep up the great content !! I may see what’s next you have and I’d plan on building one myself ! Thank you and your shop is super clean 👌

@RathaSochenda

7 ай бұрын

Thanks!

Very nicely done!.. great job with everything and especially attention to detail!.. very nice and complete video!..

@RathaSochenda

4 ай бұрын

Thank you!

Hell yeah! This is such a cool set up!

@RathaSochenda

4 ай бұрын

Thansk

My compliments for a great and well thought out design! Really nice job.

@RathaSochenda

3 ай бұрын

Thanks 🙏🏽

@EdgeofEternityBillCameron

3 ай бұрын

@@RathaSochenda I’m looking forward to seeing more!! I subscribed. Lots of talent for sure!!

Great video, looking g forward to part 2 and building plans

@RathaSochenda

9 ай бұрын

See you in part 2

Top notch video quality and build!!! I am extremely impressed by your craftmanship Sir. Respect! God Bless.

@RathaSochenda

6 ай бұрын

Appreciate it!

Looks fantastic. Thanks for sharing.

@RathaSochenda

6 ай бұрын

Your welcome 🤗

Dude nice work! This is awesome!

@RathaSochenda

4 ай бұрын

Glad you like it!

That`s really nice professional grade tool!

@RathaSochenda

6 ай бұрын

Appreciate it!

Great design....great execution.....great presentation. Really helps me justify a CNC plasma table. Having the freedom to get parts fast and iterate at low cost is gold. That was initially why I got into CNC machining - it was too expensive and very slow to prototype. Having all the tools in-house provides so many design options. Love it.

@RathaSochenda

9 ай бұрын

Appreciate the kind words! Alway helps if got can do it in house especially when prototyping

I have watched several of your videos. You do excellent work and show characteristics of a seasoned fabricator. You have earned a subscription from me. Thank you ( from a fellow fabricator) for excellent projects and taking the time to film and edit your already great content.

@RathaSochenda

7 ай бұрын

appreciate it! Thanks for the kind words.

Nice work!

@RathaSochenda

6 ай бұрын

Thank you!

👍👍 Awesome build and fantastic video!

@RathaSochenda

5 ай бұрын

Thanks 🙏🏽

Nice work buddy!

@RathaSochenda

6 ай бұрын

Appreciate it! 🙏🏽

very cool! loved to follow along on instagram but cool to rewatch here again! thanks for sharing Ratha!

@RathaSochenda

9 ай бұрын

Thanks for stopping by and watching

Great video. You did a good job building it. I think I may have to build one.

@RathaSochenda

9 ай бұрын

Thanks! It’s been working so good you just might have to make one!

Great job!

@RathaSochenda

6 ай бұрын

Thanks!

You are super inspiring, I wish I could do the same stuff like you!

@RathaSochenda

9 ай бұрын

Thanks for the nice compliment. Im sure you can do anything you put your mind to! 🦾

@Castorps_Shadow

9 ай бұрын

@@RathaSochenda What did you study if I may ask? I consider taking a course in welding or industrial product design. In what study can I learn to use CNC machines, autoCAD and welding at the same time?

@RathaSochenda

9 ай бұрын

My background is mechanical engineering. But honestly I learned most of what I know just from watching KZread videos and actually trial and error. It really is a mindset thing. I found the way to learn all three stuff like cnc , design, fabrication is to have personal projects to work on. I’m not sure if that helps answer your question but I hope it points you in the right direction. Pretty much self-taught but it helps to have online mentors you look up to and can ask questions for help. It’s amazing how many people are willing to help if you ask.

You do awesome work. Love the videos

@RathaSochenda

6 ай бұрын

Appreciate it. 🙏🏽

Great Video! Like I told you IG I will definitely be ordering one as soon as they are available. This is Leaps & Bounds above the HoBo Freight 20 Ton that I did Pimp out by adding a Air Powered Hydraulic Jack and some of Swag Off-road stuff. This is just like a Professionally made Press Brake.

@RathaSochenda

7 ай бұрын

🙏🏽

F'yeah! Awesome work! Im super inspired to build my own someday now! I have an air over hydro setup now with a Swag Offroad "break", its ok but I always felt it was lacking, this is the video I needed to see! Thanks for sharing!

@RathaSochenda

9 ай бұрын

Appreciate it. I totally understand what you mean. Hopefully this video sheds more light on other options aside from what’s already available

Amazing work!

@RathaSochenda

7 ай бұрын

Thanks brotha !

Waiting for part 2 have a blessed happy thanksgiving

@RathaSochenda

7 ай бұрын

🙏🏽

seriously impressive work. Thanks for sharing your builds and thought process, it’s so inspiring! Saw you’re a UW alum, go dawgs!!

@RathaSochenda

8 ай бұрын

🙏🏽

this is brilliant.

@RathaSochenda

4 ай бұрын

Thanks!

Nice design… keep up the projects.

@RathaSochenda

8 ай бұрын

Thank you

You deserve more views! Great content

@RathaSochenda

6 ай бұрын

Appreciate it!

Really great, thanks for sharing

@RathaSochenda

9 ай бұрын

Your welcome🦾

Incredible accuracy and design process

@RathaSochenda

9 ай бұрын

Yeah it’s not too shabby for a homemade/garage setup.

@ffgghjssxcyj

9 ай бұрын

@@RathaSochenda didnt you consider producing it and selling to people?

@RathaSochenda

9 ай бұрын

@@ffgghjssxcyj just the plans for the frame and all the features I added or will at to the pressbrake tool to make it more semi-auto.

Very nice build 👍🏻

@RathaSochenda

9 ай бұрын

Appreciate it!

Great video!!!! Keep up the great work! 👍🏽👍🏽

@RathaSochenda

9 ай бұрын

Thanks for watching!

very rad man. your channel is fantastic.

@RathaSochenda

9 ай бұрын

Thanks. Glad you like the channel

That’s awesome!!

@RathaSochenda

9 ай бұрын

Thanks. Glad you enjoyed it!

Nice work!!

@RathaSochenda

9 ай бұрын

Thank you!

Very nice job !!

@RathaSochenda

8 ай бұрын

Thank you!

Your engineering is super impressive =) Love to see a fellow PNW-er killin the game!

@RathaSochenda

8 ай бұрын

I appreciate it!

Excelente

6 minutes in to knowing you exist and an instant subscriber. Well done dude, well done!

@RathaSochenda

4 ай бұрын

Thanks!

Great channel!

@RathaSochenda

8 ай бұрын

Thanks

WE need Part 2 pleaaaasssseee!!!!

Solid

@RathaSochenda

9 ай бұрын

Appreciate it! Stay tune for part 2

yes, awesome !

@RathaSochenda

6 ай бұрын

Appreciate it! 🙏🏽

Yessir! 👨🏾‍🏭

@RathaSochenda

9 ай бұрын

Thanks for watching

Very nice project man! Looking forward to each video of you 💪🏻 how do you achieve different bending angles?

@RathaSochenda

9 ай бұрын

I’ll show you in part 2 or 3 of the video series. But in short I’ll adjust the thread bolt and record that depth specific for the angle. I’ll have a chart that I will create that will show what depth I need for certain angles I have per thickness. Mainly for me is 45 deg and 90s. If it’s some odd angle I’ll use a digital angle finder and bump the pressbrake pedal until I reach it.

Just earned a sub.

@RathaSochenda

6 ай бұрын

😎

Been waiting months for part 2

@RathaSochenda

6 ай бұрын

Man you and me both! This holidays season been taking up so much of my time. Hopefully I can carve out some time and get part 2 up

several years ago i made my press out of bridge banister-- 5in angle riveted together about12 in apart for the uprights and 12 in channel for the front and back of the table, and the top rails of the head,. I tried something different i made the hydraulic jack bracket (Head) so it slid along the top channels allowing me to press right next to the side(that had an opening between the angle iron legs) i was doing mostly farm parts straitening or pressing bearings out, the table was the only weak point as it is held by 2 3/4 in pins but they run through the front and back channels. never put enough pressure to bother them tho . like the repeatable of your design

Freakin awesome. Going in my to do videos

@RathaSochenda

8 ай бұрын

🤟🏾

Excellent.Finally I have seen what I wanted... Any time schedule for PART 2 of this video? Thanks.

@RathaSochenda

5 ай бұрын

Hopefully soon…

@norbyk3637

5 ай бұрын

Hi Ratha. I have tried to purchase and download the plan but the paypal is not working and there are some EU contries are not listed in the purchase selection. Any advice or other option You may recommend,please? Thank You very much indeed.@@RathaSochenda

@RathaSochenda

5 ай бұрын

@@norbyk3637 for the build plans on international orders go here : www.etsy.com/listing/1575803667/diy-shop-hydraulic-press-brake-digital?etsrc=sdt

Very nice design & execution as well what is tonnage capacity of the machine and how much max thickness that can be bendable .

@RathaSochenda

4 ай бұрын

3/16” is what I’ve tested

Excellent work👍

Great work, when is part 2 coming?

@RathaSochenda

7 ай бұрын

In the works… thanks for watching

This is awesome , when will part two be out?

@RathaSochenda

8 ай бұрын

Hopefully soon

Excellent Video! Just stumbled on your channel and just finished binge watching all your vids. Great presentation and full of useful info. Your channel is way underrated, this kind of quality deserves much, much more subs. I had planned to build a similar item, but now I will take advantage of your design: Now going over to your website to order the plans. Btw. Not sure where you are located (I assume in the US?), did you have any issues importing the Cyclops Design parts? Thank you, Bernhard

@RathaSochenda

7 ай бұрын

Appreciate it. No issues importing from Tom over at cyclops design. Depending on what he has in stock it can take as little as two weeks or as long as a month for your press to arrive. But I can say it’s worth the wait especially if you compare cost of die/punch tooling here in the states.

@RathaSochenda

7 ай бұрын

Also if you have any other questions please reach out to me on my contact page of my website. I'll be here to help!

Why not a c frame design like some of the commercially available ones? I made one similar to this many years ago, albeit much cruder. I would really like a c frame style.

👍

I would love to build this, do vevor still do that ram as i cant find it. Whats the thickest plate you have bent

@RathaSochenda

7 ай бұрын

Items used in this video: Cyclops Press Brake Tool: / cyclopsdesigns or www.ebay.com/itm/115064499037... Electric Hydraulic Pump/s: s.vevor.com/bfQHVv Vevor 30 Ton Cylinder: s.vevor.com/bfQh9M Anti-Wear Hydraulic Fluid: amzn.to/3Lt3YP9 Limit Switch: amzn.to/3qZNw1Z Return Springs: amzn.to/47X0YnM Linear Rail: amzn.to/3L2KLnp Digital Angle Gage: amzn.to/3QZTESt Leveling Caster 2200lb Capacity Set of 4: amzn.to/486WB9U a safe thickness would be 3/16" full steel sheet (23.625" long).

Hi, how much is your unit prssure sir?

Great build. Will you have an approximate idea of total cost when you complete the press?

@RathaSochenda

9 ай бұрын

I haven’t total numbers yet as I’m still working it but I’ll make sure to breakdown the cost in future videos

@mackwilson9178

6 ай бұрын

@@RathaSochenda I also was curious about the ball park cost for this project? Any rough numbers? Thanks

@RathaSochenda

6 ай бұрын

$3000 max

Great video where is part 2 lol

@RathaSochenda

5 ай бұрын

Working slow on it 😅

Do you think you could do the same set up for a wider bender? I would say enough to fit 1800 wide material

@RathaSochenda

7 ай бұрын

Most likely no… you will most likely have to run two cyclinder and get them synchronized

@shaunos100

7 ай бұрын

I thought that would the case. Are you looking at making your own dies? There’s a with people I’ve seen who cut 16mm plate then weld them together to make a longer piece

Fantastic. Using the limit switch is a great idea. One thing I missed is how you can from 45 to 90 and back again without adjusting the bolt every time. Looking forward to the DRO.

@RathaSochenda

9 ай бұрын

I’ll explain it in the video part 2 or 3

@NoName-ml5yk

9 ай бұрын

@@RathaSochenda Can't wait. Thanks.

Do you have prints available for this? It’s perfect for my needs

@RathaSochenda

6 ай бұрын

Yes please check the links in the video description for the blueprints

I already started this build and just realized it's not made for a 6ft tall dude. 😂

@RathaSochenda

8 ай бұрын

😂

@manitobaman5588

6 ай бұрын

New subscriber from province of Manitoba, Canada. Excellent and practical design.I like your thinking on the preß brake with tooling from UK. THANKS FOR SHARING YOUR SUPPLY SOURCES AND IDEAS.

What was the cost of build?

@RathaSochenda

8 ай бұрын

Check out the Etsy link in video description. Then go under item details and I break down the entire cost to build this. Hope that helps

@332ARA

8 ай бұрын

got it, thanks@@RathaSochenda

Part 2???? 👁👁️🙏🏾

@RathaSochenda

5 ай бұрын

I know right 😅

兄弟，切割的时候注意防护颗粒物，带一个3m的防护面罩吧。

@RathaSochenda

6 ай бұрын

sure

Great ideas. Is there a part 2?

@RathaSochenda

6 ай бұрын

Coming soon!

Great Build Great Design Great Video Well done man , from a new sub from the Rep of Ireland

@RathaSochenda

2 ай бұрын

Thanks

Why not a c frame design like some of the commercially available ones? I made one similar to this many years ago, albeit much cruder. I would really like a c frame style.

@RathaSochenda

7 ай бұрын

That would work too!