Where did you get the part from it just happened to me yesterday on my 2021 f150
@dr.kennymakit11673 күн бұрын
Great video! Thanks
@Ed-gy3xb4 күн бұрын
Check the muffler screen on a chainsaw when they dog like that
@bradjenkins9324 күн бұрын
The more raps of cable on the drum, the less it will pull.
@tomcarpenter60364 күн бұрын
Did you paint or treat the underside of the deck at all?
@adamj82934 күн бұрын
No I didn’t.
@emadmansour72594 күн бұрын
What is the part number and where to order. Ford parts shows the horizontal keypad only.
@craigwagner3275 күн бұрын
When you strap your bike, is the kickstand touching the ground or do you have someone hold bike up to where it's straight and strap it and kickstand is off the ground?
@adamj82934 күн бұрын
Straight up. I strap the kickstand side first, just snug, then when putting pressure on the right side it pulls it to the upright position.
@craigwagner3274 күн бұрын
@@adamj8293 ok thanks
@robertwikeljr-15225 күн бұрын
To keep trolley straight clamp a length of square stock to sides of trolley then tighten bolts. By adding a table clamp to end of one trolly can use it as resistance or brake.
@sammydavenport7 күн бұрын
Did you mix the Permethrin as directed or some other mixture. I didn't see you do anything with the smaller chamber. I went to their website. I seriously need help. I just want the same effect you had the the kill
@adamj82937 күн бұрын
Yep. I just mixed per the instructions on the bottle. Works like a charm.
@jerrykates460110 күн бұрын
Where I come from
@christijacobs319911 күн бұрын
You are fighting what is not an issue. I owned a horse barn that was 60+ yrs old and there was tons of carpenter bees. The barn mad it thru a tornado without moving an inch. They fill the holes back up and it is strong as ever. Leave them alone.
@robinfielding110811 күн бұрын
Just got a house and their in the car port
@raymondmwambala714211 күн бұрын
Ohhh you man you saved me alot of time and effort. I had the same exact situation Ford F150 2018 but thankfully i watched the whole entire video before tearing the door down.Thanks for this helpful video
@경남호이스트TV12 күн бұрын
구독과 좋아요 눌리고 갑니다 멋져요 ^^ 굿 👍👍
@eroom208716 күн бұрын
Perfect machine for that job
@grahammiller581217 күн бұрын
do you know the nozzle flow rate? does the owners manual give any detail?
@adamj829316 күн бұрын
I don’t know. Sorry. I just know it works well when I’m in low gear at a moderate pace.
@user-nm9qp4np4q17 күн бұрын
It also helps when you treat the hole with whatever seal it with some wood putty caulk whatever be traps are great also Damon insecticide
@user-nm9qp4np4q17 күн бұрын
Bee traps viper, and Damon insecticides I used to have these little devils until I used these products now I have a very few probably next year I won’t have any
@FoMoCo190318 күн бұрын
No matter how hard you rub it it’ll still be a Chevy!😂👍🍻
@AndyMears18 күн бұрын
Great project. Could you add strong magnets to the help keep them in place on the Quick Jack tray?
@adamj829318 күн бұрын
That’s not necessary. Once you park a couple tons on them they’ll never move.
@Alabamaweldinginspector19 күн бұрын
Goof off will wipe it right off !
@mordiev20 күн бұрын
Permethrin is a natural product but it is still toxic to people and pets. Cats are especially sensitive to it if they ingest it. I have seen three cats die from permethrin poisoning. One licked it off of her own fur and the other two died from eating dead bugs after the poison killed them.
@sandysue20224 күн бұрын
I have one that was my late husbands. Its been out in the garage rolling around for close to 8 or 9 years and is still going strong. If he had used it constantly, the plastic wheels might have gotten a bit funky but with light use, they are still just fine. I just cleaned it up and brought it in the house today. I will use it as more of a kneeler bench to help me get up and down from the floor and its also good to have the magnetic tool tray to carry around nails and screws and small hand tools. Plus, I have always loved the red and black color. The cats think its pretty cool to sit on, too!
@craigguinn542324 күн бұрын
Nice work, surprised at your planning. Good to see the saw and tractor working together.
@DPA37325 күн бұрын
I love your dogs there beautiful
@cpick820826 күн бұрын
Definitely deserves a sub and like. Thanks for saving me all the work!
@AmericasTeamAdventure27 күн бұрын
This took a moment to sink in. Once it did... Brilliant! I'm building one.
@popwall4297Ай бұрын
The way you change that down in the back is against the law in most States you have to have two separate chains one for each side .strap you used in the front you turn the hook upside down if it gets loose the hook is going to fall out you don't turn the hook that way you turn it down if you get a little slack the hook will still stay in there not drop down and out in Most states every Implement you have on the tractor has to be boomed down booming just tractor will get you a ticket
@geraldmurphy1428Ай бұрын
Good Evening. I try something and it works. All I did is a large brown paper Bag. I put a little gravel in the bag . Tie the bag and put a string to hold the bag for handing. Put it whenever you have carpenter bees. Mine Work s.🦟
@docrx1857Ай бұрын
Permethrin is goos stuff. In the army we used to treat our uniforms with permethrin to prevent sand fleas in the desert. One treatment was weffective for about 6 months even with normal clothes washing.
@aday5060Ай бұрын
Totally works!! Thank you! My boyfriend has a large patio and a storage shed that is sitting up on concrete blocks in the backyard and the bees were under the patio as well as under the storage shed. I observe them for several weeks and then I found your video, mixed up some spray and sprayed everywhere and they were gone Pretty much immediately. It’s been over a month and they have not returned yet. Thank you again.
@jimtanouye7773Ай бұрын
Has a Kubota Tractor like that in your picture- loved it ! - Also just ordered the Quickjack 7000TL and hope no delivery issues or set-up problems. Now want the caster wheels and have seen the"Insanely Priced" ones that look just great but trust the "Wealthy of Us" (Sure not me ) that can afford them like them. Good down to earth video, Thanks ! Jim T.
@rogma77Ай бұрын
Dear sir, do u have the part.nr for these pegs? Best regards Roger
@patgenier1965Ай бұрын
Thanks for the vid. Good tip.. I have a 2021 Versys 650. What engine guard do you have on yours?
@ralphmoore9422Ай бұрын
How about saving the insecticide until you absolutely need it…screen the undersides of the deck (do not use a solid material which may trap moisture leading to mosquito issue)exclusion is priority one.
@mroot8844Ай бұрын
Mine is having trouble clipping into the plug? Any tips?
@Stvstv-iu2ewАй бұрын
Awesome job. Thanks for the idea. I'll make one for my snowblower attachments on my bx23s
@FrankRizzo557Ай бұрын
Owned a farm for many years in NJ and, yes, we have carpenter bees. They are very destructive to the wood structures, albeit, they are pollinators.... My trick was similar to the posters approach. THE KEY is to spray your wood structures prior to them showing up, which was typically Spring in NJ. Prior is key! Then they don't make any boring nests. If they do bore into the wood, spray a bit of bug spray into the hole, pack it with steel wool and then plug the hole with a small dowel rod. A racket ball racket works better than a tennis racket. Nip it in the butt and you should be good for the rest of the year. They also make cheap traps that you can buy on the internet. Leave the dead bees in the trap, this apparently attracts other carpenter bees. Protect your structures and let the bees go live in the woods.
@redfaux74Ай бұрын
Painting the wood works too. They will not drill thru, eat thru the paint.
@PolarcutterАй бұрын
And don’t be fooled they will sting you..
@dongenova2445Ай бұрын
I've been using enforcer duel action but it's been a battle. I might try this next time. Thanks for sharing.
@emg926Ай бұрын
I think I just got ripped off. Pest control company did exactly what you did for $326
@jonsmith3664Ай бұрын
That dog is awesome. And so is the job!!! I would have used rocks or a mixture of sand and gravel personally. Leaves you with options for storing etc…
@cecilchristopher5092Ай бұрын
What I do is dig a burn pit so that all I have to do is fill it back in after I am through burning and that buries all the nails
@BobBob-db2xqАй бұрын
Condenser fan puller would work
@CatsMeowingtonАй бұрын
Good video, I'll keep this is mind. I have been using a carpenter bee trap and has been effective.
@user-yn3lk4xf2cАй бұрын
Damn, i can smell it from here!
@tonymarchant9083Ай бұрын
nice job 👍👍👍
@paulclarke3132Ай бұрын
Actually Permethrin is highly toxic to cats. They do not have the liver enzymes to break down the toxins and it builds up in their bodies.
Пікірлер
Where did you get the part from it just happened to me yesterday on my 2021 f150
Great video! Thanks
Check the muffler screen on a chainsaw when they dog like that
The more raps of cable on the drum, the less it will pull.
Did you paint or treat the underside of the deck at all?
No I didn’t.
What is the part number and where to order. Ford parts shows the horizontal keypad only.
When you strap your bike, is the kickstand touching the ground or do you have someone hold bike up to where it's straight and strap it and kickstand is off the ground?
Straight up. I strap the kickstand side first, just snug, then when putting pressure on the right side it pulls it to the upright position.
@@adamj8293 ok thanks
To keep trolley straight clamp a length of square stock to sides of trolley then tighten bolts. By adding a table clamp to end of one trolly can use it as resistance or brake.
Did you mix the Permethrin as directed or some other mixture. I didn't see you do anything with the smaller chamber. I went to their website. I seriously need help. I just want the same effect you had the the kill
Yep. I just mixed per the instructions on the bottle. Works like a charm.
Where I come from
You are fighting what is not an issue. I owned a horse barn that was 60+ yrs old and there was tons of carpenter bees. The barn mad it thru a tornado without moving an inch. They fill the holes back up and it is strong as ever. Leave them alone.
Just got a house and their in the car port
Ohhh you man you saved me alot of time and effort. I had the same exact situation Ford F150 2018 but thankfully i watched the whole entire video before tearing the door down.Thanks for this helpful video
구독과 좋아요 눌리고 갑니다 멋져요 ^^ 굿 👍👍
Perfect machine for that job
do you know the nozzle flow rate? does the owners manual give any detail?
I don’t know. Sorry. I just know it works well when I’m in low gear at a moderate pace.
It also helps when you treat the hole with whatever seal it with some wood putty caulk whatever be traps are great also Damon insecticide
Bee traps viper, and Damon insecticides I used to have these little devils until I used these products now I have a very few probably next year I won’t have any
No matter how hard you rub it it’ll still be a Chevy!😂👍🍻
Great project. Could you add strong magnets to the help keep them in place on the Quick Jack tray?
That’s not necessary. Once you park a couple tons on them they’ll never move.
Goof off will wipe it right off !
Permethrin is a natural product but it is still toxic to people and pets. Cats are especially sensitive to it if they ingest it. I have seen three cats die from permethrin poisoning. One licked it off of her own fur and the other two died from eating dead bugs after the poison killed them.
I have one that was my late husbands. Its been out in the garage rolling around for close to 8 or 9 years and is still going strong. If he had used it constantly, the plastic wheels might have gotten a bit funky but with light use, they are still just fine. I just cleaned it up and brought it in the house today. I will use it as more of a kneeler bench to help me get up and down from the floor and its also good to have the magnetic tool tray to carry around nails and screws and small hand tools. Plus, I have always loved the red and black color. The cats think its pretty cool to sit on, too!
Nice work, surprised at your planning. Good to see the saw and tractor working together.
I love your dogs there beautiful
Definitely deserves a sub and like. Thanks for saving me all the work!
This took a moment to sink in. Once it did... Brilliant! I'm building one.
The way you change that down in the back is against the law in most States you have to have two separate chains one for each side .strap you used in the front you turn the hook upside down if it gets loose the hook is going to fall out you don't turn the hook that way you turn it down if you get a little slack the hook will still stay in there not drop down and out in Most states every Implement you have on the tractor has to be boomed down booming just tractor will get you a ticket
Good Evening. I try something and it works. All I did is a large brown paper Bag. I put a little gravel in the bag . Tie the bag and put a string to hold the bag for handing. Put it whenever you have carpenter bees. Mine Work s.🦟
Permethrin is goos stuff. In the army we used to treat our uniforms with permethrin to prevent sand fleas in the desert. One treatment was weffective for about 6 months even with normal clothes washing.
Totally works!! Thank you! My boyfriend has a large patio and a storage shed that is sitting up on concrete blocks in the backyard and the bees were under the patio as well as under the storage shed. I observe them for several weeks and then I found your video, mixed up some spray and sprayed everywhere and they were gone Pretty much immediately. It’s been over a month and they have not returned yet. Thank you again.
Has a Kubota Tractor like that in your picture- loved it ! - Also just ordered the Quickjack 7000TL and hope no delivery issues or set-up problems. Now want the caster wheels and have seen the"Insanely Priced" ones that look just great but trust the "Wealthy of Us" (Sure not me ) that can afford them like them. Good down to earth video, Thanks ! Jim T.
Dear sir, do u have the part.nr for these pegs? Best regards Roger
Thanks for the vid. Good tip.. I have a 2021 Versys 650. What engine guard do you have on yours?
How about saving the insecticide until you absolutely need it…screen the undersides of the deck (do not use a solid material which may trap moisture leading to mosquito issue)exclusion is priority one.
Mine is having trouble clipping into the plug? Any tips?
Awesome job. Thanks for the idea. I'll make one for my snowblower attachments on my bx23s
Owned a farm for many years in NJ and, yes, we have carpenter bees. They are very destructive to the wood structures, albeit, they are pollinators.... My trick was similar to the posters approach. THE KEY is to spray your wood structures prior to them showing up, which was typically Spring in NJ. Prior is key! Then they don't make any boring nests. If they do bore into the wood, spray a bit of bug spray into the hole, pack it with steel wool and then plug the hole with a small dowel rod. A racket ball racket works better than a tennis racket. Nip it in the butt and you should be good for the rest of the year. They also make cheap traps that you can buy on the internet. Leave the dead bees in the trap, this apparently attracts other carpenter bees. Protect your structures and let the bees go live in the woods.
Painting the wood works too. They will not drill thru, eat thru the paint.
And don’t be fooled they will sting you..
I've been using enforcer duel action but it's been a battle. I might try this next time. Thanks for sharing.
I think I just got ripped off. Pest control company did exactly what you did for $326
That dog is awesome. And so is the job!!! I would have used rocks or a mixture of sand and gravel personally. Leaves you with options for storing etc…
What I do is dig a burn pit so that all I have to do is fill it back in after I am through burning and that buries all the nails
Condenser fan puller would work
Good video, I'll keep this is mind. I have been using a carpenter bee trap and has been effective.
Damn, i can smell it from here!
nice job 👍👍👍
Actually Permethrin is highly toxic to cats. They do not have the liver enzymes to break down the toxins and it builds up in their bodies.
they dont like paint stain or deck sealer. 🍻