Пікірлер

• 
  @birko8151Күн бұрын

  Thanks for sharing

• 
  @birko815110 күн бұрын

  Nice set up thanks for the upload Terry and Phil

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks for watching 👍

• 
  @M1n1Mouse13 күн бұрын

  Learnt something today. Thankyou.

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Jenny for watching 👍❤️🐾🐶

• 
  @jackturtle13116 күн бұрын

  In the Victron you can turn the Floatcharge off for lithium batteries. So it makes sense that Renogy turned it off for them. Great job guys

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Jack for watching 👍❤️🐾🐶

• 
  @gail990616 күн бұрын

  Hi Terry and Phil 👋Gail and Tom ❤🇦🇺🦘

• 
  @HandcraftedByTerryG8 күн бұрын

  Hi Gail and Tom thanks guys for watching 👍❤️🐾🐶

• 
  @timryan386016 күн бұрын

  Great clip guys thanks for sharing.

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Tim for watching 👍❤️🐾🐶

• 
  @markhopkins992516 күн бұрын

  Thanks Terry ,your power plant on the caravan looks great . Keep ‘em coming ! 👍👍🍻🍻

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Mark for watching 👍❤️🐾🐶

• 
  @TyFenwick16 күн бұрын

  Good work Terry !!! 👍🏼👍🏼👍🏼

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Ty for watching 👍❤️🐾🐶

• 
  @louiskudlak225616 күн бұрын

  I should do mine, save some money 💰

• 
  @HandcraftedByTerryG8 күн бұрын

  😂Yeah mate I’m the same I have to do mine to Thanks Louis for watching 👍❤️🐾🐶

• 
  @grahamwhittaker884416 күн бұрын

  👍👍👁️👁️😎😇❤️🙏

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Graham for watching so sorry to hear about Roxy hope you and the Bride are both well 👍❤️🐾🐶

• 
  @Sawadventures6716 күн бұрын

  Absolutely fantastic Setup well done to you Terry and also to phill You might be able to leave your generator at home now looking forward to checking it out in person well done👍👍

• 
  @HandcraftedByTerryG8 күн бұрын

  That’s the plan mate 👍Thanks SAW for watching 👍❤️🐾🐶

• 
  @petermcmurtrie16 күн бұрын

  Terry and Phil thanks I learned a bit more today. Phil you make it look so easy too. I wish I had half your knowledge when it comes to 12v systems 🙂👍

• 
  @HandcraftedByTerryG8 күн бұрын

  Thanks Peter for watching 👍❤️🐾🐶

• 
  @MichelleTurnbridge18 күн бұрын

  Do you sell that paraffin and beeswax mix

• 
  @HandcraftedByTerryG8 күн бұрын

  Yes I do but the price varies if your overseas because of postage cause it’s just a flat rate here in Australia 🇦🇺 👍

• 
  @MichelleTurnbridge18 күн бұрын

  I want to burn a design into some camphor wood and seal it so you can use it as a chopping board

• 
  @HandcraftedByTerryG18 күн бұрын

  Hi Michelle wow thats would look fantastic send me some photos please after you completed it i would love to see it. Thanks for watching my video. Email: [email protected]

• 
  @anthonywicks558621 күн бұрын

  Great video Terry you are a wealth of knowledge 👍

• 
  @HandcraftedByTerryG20 күн бұрын

  Thanks for watching Wicksy👍

• 
  @markolav7022 күн бұрын

  Love your work Terry...nothing you can't do mate. Dad used to teach me how to pack the bearing grease Great tips and advice on here as always mate. Big thumbs up from me champion !

• 
  @HandcraftedByTerryG22 күн бұрын

  Thanks Mark for watching 👍

• 
  @deankala22 күн бұрын

  This is a bearing install, not a replacement that includes getting the old seal and cup off, that is half the battle.

• 
  @HandcraftedByTerryG22 күн бұрын

  Thanks Dean for watching 👍

• 
  @SteveMrW22 күн бұрын

  Terry, what you have done is what my dad could have done, he was a trained panel beater, mechanic and sprayer, he could do any job that needed doing. He had loads of tools that when he passed away we sold off because we don’t have the skills or knowledge to do these jobs. Interestingly you called it a ball point hammer, we call it a ball peen hammer. I love our shared English language. Did Phil do the other side?

• 
  @markolav7022 күн бұрын

  Plenty of ball pein hammers in my late Dad's shed Steve

• 
  @HandcraftedByTerryG22 күн бұрын

  Thanks Steve for watching 👍yes mate we did the other side and replace the cups and the bearings

• 
  @darrenc409623 күн бұрын

  Thank you Terry for taking the time to show how it’s done. You’ve given me the confidence to give it a crack myself. Cheers mate. 🍺

• 
  @HandcraftedByTerryG22 күн бұрын

  Thanks Darrenc for watching 👍Just remember to take your time with it and make sure your bearing cups are well seated and you bearing are well greased. Thanks 👍

• 
  @Sawadventures6723 күн бұрын

  Great job terry well done jack of all trades 👏👍🍻

• 
  @HandcraftedByTerryG22 күн бұрын

  Thanks Steve for watching 👍 love seeing your videos and your posts thanks for your support and encouragement Thanks 👍

• 
  @markhopkins992523 күн бұрын

  Thanks Terry and Phil. Great video to assist in doing it yourself . 👍👍🍻🍻

• 
  @HandcraftedByTerryG23 күн бұрын

  Our pleasure! Thanks for watching 👍🇦🇺❤️

• 
  @MrPinkhighlighter23 күн бұрын

  What size shirt you got on Mr Terry? Just trying to work out sizing

• 
  @HandcraftedByTerryG23 күн бұрын

  I’m wearing 2 xl If you head to Smg Sports web site you will find all of the sizes listed in the description. Thanks for your support 👍🇦🇺🐾

• 
  @nags340423 күн бұрын

  Good job terry , my box trailer has needed bearings for a while now . I better go do it after watch this video . Cheers .

• 
  @HandcraftedByTerryG23 күн бұрын

  Thanks for watching mate 🇦🇺👍🤪

• 
  @dboutnabout273223 күн бұрын

  Great work Terry..very man needs a shed to work in …great stuff..👍🍻

• 
  @HandcraftedByTerryG23 күн бұрын

  👍 thanks for watching 👍🇦🇺

• 
  @LandySmurf24 күн бұрын

  like a pro, well done Terry

• 
  @HandcraftedByTerryG23 күн бұрын

  Thanks Landy for watching 👍🇦🇺🤪

• 
  @freddieboots51724 күн бұрын

  well done Terry you brought back memories with the koyo bearings I was a store man for them when I was 16. for a couple of years then salesman selling them for 10. they are one of the best you can get. cheers

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Freddy for watching 👍🇦🇺🐾❤️

• 
  @SteveMrW21 күн бұрын

  When I was a trainee I was sent to the stores to ask for a long weight. It turned into a long wait😁

• 
  @grahamwhittaker884424 күн бұрын

  👍👍👁️👁️😎😇❤️🙏

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Graham for watching 👍🇦🇺🐾❤️

• 
  @timryan386024 күн бұрын

  Great job Terry, and you’re right about not getting any younger it kills my back lifting tyres back onto the studs.

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Tim for watching 👍🇦🇺🐾❤️

• 
  @jackturtle13124 күн бұрын

  Good job mate

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Jack and Mrs T for watching 👍🇦🇺🐾❤️

• 
  @raynewman490428 күн бұрын

  Hey Terry, looks good mate great improvement. Sorry I missed you on the last live feed Cheers mate 👍

• 
  @HandcraftedByTerryG24 күн бұрын

  That’s okay Ray next time mate. Thanks for watching 👍🇦🇺🐾❤️

• 
  @NathanSchilling129 күн бұрын

  Nice one Terry! Very informative.

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Nathan for watching 👍🇦🇺🐾❤️

• 
  @dboutnabout2732Ай бұрын

  That was great TG....👍to ya…😎

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks for watching 👍🇦🇺🐾❤️

• 
  @markhopkins9925Ай бұрын

  Good one Terry ! Inspired to do it myself . Keep ‘em coming ! 👍👍🍻🍻

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Mark for watching 👍🇦🇺🐾❤️

• 
  @gail9906Ай бұрын

  How good was the finish Terry. We dont know how you did it! So many wires. 🥴❤️🇦🇺🦘

• 
  @HandcraftedByTerryG24 күн бұрын

  😂Thanks Gail for watching 👍🇦🇺🐾❤️

• 
  @LandySmurfАй бұрын

  definitely a big improvement- well done!

• 
  @HandcraftedByTerryG24 күн бұрын

  I think so too! Thanks Landy for watching 👍🇦🇺🐾❤️

• 
  @petermcmurtrieАй бұрын

  Nice Work Terry! 🙂👍

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Peter for watching 👍🇦🇺🐾❤️

• 
  @BradySmith1987Ай бұрын

  more cooking videos please mate

• 
  @HandcraftedByTerryG24 күн бұрын

  Soon Brad will get 1 up for you mate 👍

• 
  @TyFenwickАй бұрын

  Great video Terry 👍🏼👍🏼👍🏼

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Ty for watching 👍🇦🇺🐾❤️

• 
  @timryan3860Ай бұрын

  Great job Terry you’ve really tidied up that pile of spaghetti you started with.

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Tim for watching 👍🇦🇺🐾❤️

• 
  @freddieboots517Ай бұрын

  good stuff Terry old cable looks like done by a irishman who believes in the Irish screwdriver {hammer] he did get the keep clear sticker right though lol

• 
  @HandcraftedByTerryG24 күн бұрын

  😂😂😂Thanks Freddie for watching 👍🇦🇺🐾❤️

• 
  @lornamcmillan7911Ай бұрын

  Good vid Terry, you have made it a lot tidier and safer than what it was , Job well done Mate Thanx for sharing 🍻

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Lorna for watching 👍🇦🇺🐾❤️

• 
  @grahamwhittaker8844Ай бұрын

  Bloody brilliant Terry 👍👍👏👏👏👏although it does make me feel like I’m a complete failure 😂😂. I’m also starting to become a big fan of the Kings lithium batteries,if I had to do it again I’d go for the two two hundred amps as well,although the three hundred weighs no more than the one thirty amp lead acid it replaced,took no modifications or extra wires and truly is a beast. The ability to run a larger inverter off twin 200ah would have been better. I couldn’t help but wonder if you can get those strippers in a size big enough to use on the bride 😂😂but than I realised that if she happens to see this comment she might find a better use for the crimpers 😂😂 . Sorry she’s been away for nearly three months now, it must have been all the talk about nuts,screws,studs and strippers that made me think of it. 👁️👁️😎😇🐕‍🦺❤️🙏

• 
  @lornamcmillan7911Ай бұрын

  Good vid Terry you have made it heaps neater and a lot safer compared to what it was, Job well done Mate Thanx for sharing 🍻

• 
  @lornamcmillan7911Ай бұрын

  Soz Graham

• 
  @acafwdАй бұрын

  👍

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Rob for watching 👍🇦🇺🐾❤️

• 
  @louiskudlak2241Ай бұрын

  Well done, very tidy plus save some $$$ doing it yourself

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Louis for watching 👍🇦🇺🐾❤️

• 
  @jackturtle131Ай бұрын

  Good Job Mate

• 
  @HandcraftedByTerryG24 күн бұрын

  Thanks Jack for watching 👍🇦🇺🐾❤️

• 
  @jennifergee7657Ай бұрын

  I love the bass drop in your opening reel

• 
  @HandcraftedByTerryG24 күн бұрын

  🤪we all dancing around the house when that song comes on 🤪

• 
  @jackturtle131Ай бұрын

  It's going to be a dream setup mate. I'm going to be a little bit jealous buddy😉 Sorry Terry did see this clip only at 4 am Thursday morning

• 
  @HandcraftedByTerryGАй бұрын

  Hi Jack yeah mate she going to be fantastic once its all completed. Thanks for watching

• 
  @newyboysАй бұрын

  Terry is the shunt blue toothed.

• 
  @HandcraftedByTerryGАй бұрын

  Hi Newy No mate the shunt not bluethooth im looking at the one core mointor which saves me trying to connect everything to the phone

• 
  @petermcmurtrieАй бұрын

  Sorry I missed your live feed Terry. Catching up on your 12v installation now. 🙂👍

• 
  @HandcraftedByTerryGАй бұрын

  Thats okay Peter. Thanks for watching the replay mate

• 
  @grahamwhittaker8844Ай бұрын

  Sorry I missed the live Terry ,I was in at the new (old ) house (shack)😂checking up on the workers ,it was like watching a pack of bees ,they are getting stuck right up it . 🤞Fingers crossed,hopefully we’ll make a few dollars on the flip. I’m already looking around for the next one just to keep them moving 😂😂😂. Hey it can only come crashing down like a pack of cards but you know the saying,in for a penny in for a pound . My young bloke Rob (Bob the builder)specialises in doing these Reno jobs so we moss well take advantage of him . The deal being we split any profit 50/50 . I’m loving what you’re doing to the van mate,bloody awesome. Once you have it all setup the way you want you should be never wanting for power,which believe me is only a good thing. Stay strong,say g,day to the bride for me 👁️👁️😎😇🐕‍🦺❤️🙏

• 
  @HandcraftedByTerryGАй бұрын

  Thats okay Graham hopefuly everythings going well