Пікірлер

• 
  @antoniofrance88 күн бұрын

  Je conseille vraiment un xk 110s Le meilleur helico pour aprendre les base de la 3d sans se fair mal

• 
  @maurice82013 күн бұрын

  Best explanation I have seen. Thx.

• 
  @RCStuffvideos13 сағат бұрын

  Thanks

• 
  @0UTCAST24723 күн бұрын

  Great video very informative, question, I suppose this method tightening blade grips/clips would be also applicable to helis with more than 2 blades?

• 
  @adrastos12327 күн бұрын

  Theres orange. Also make purple

• 
  @tittentei733128 күн бұрын

  How do i fly 3d and how to fly 6g? I mean, how to switch from normal to upside down flying? Is it mode 1 and mode 2 or a switch on the controller? Nice Video Man!

• 
  @Jan-cm2ye29 күн бұрын

  I haven't found anything on if it is possible to fly the model with no idle up AND no stability. I wouldn't feel comfortable to take off with idle up but always relying on stability to take off and land feels wrong.

• 
  @simcrazy4291Ай бұрын

  i got hit in the leg with my 230 s hurt like hell

• 
  @jeffrenman4146Ай бұрын

  Now that I've been flying mine a bit could you not have just used forward programming and adjusted the flight controller. There's calibration settings and their for the drift… That's what I did and my 230 hovers perfect… And it was quick. But believe me I am no expert I did find the blade 230 had horrible tail rotor Hold… So I had to learn the PID algorithm and the numbers I programmed are nowhere near what the factory puts in. I now have a better tale hold I was getting large blowback when aggressive

• 
  @user-ez8oc4xf9mАй бұрын

  Good explanation thank you

• 
  @RCStuffvideosАй бұрын

  You're welcome!

• 
  @andycobra49aorАй бұрын

  Hello sir; How are you sir? what is the model of this helicopter because I would love to learn how to fly those types of aircraft. I am old, retired military, served my country for 21 1/2 years and deployed 3 times. I do enjoy remoted aircraft. Because these aircraft are very expensive, I would like to know what type, model if you may please sir, thanks. I will keep this video for guidance how to fly and maintain this type or any other aircraft.....Thanks.. Respectfully; Andy Disable Vet Texas

• 
  @RCStuffvideosАй бұрын

  Hi this is the blade 230s V2. Not too expensive.

• 
  @cutefox8319Ай бұрын

  So seems basically like the swashplate was uneven? Wonder if just adjusting physical links to level the swashplate would work too.

• 
  @RCStuffvideosАй бұрын

  Oh I'm sure it would. This is just a bit less fiddly I suppose, especially if it's only slightly out. Cheers

• 
  @glenduncan8125Ай бұрын

  Hey, I really like this RC Heli channel and I am really sorry to see that it hasn't had an update for over a year. I hope all is well health wise. Can you at least check in if all is well? Best wishes.

• 
  @RCStuffvideosАй бұрын

  Hi mate thanks for the comment. Yes all good thanks for asking. Just haven't had time for any more video sor even RC flying at all for a long time with work being busier and having 2 kids now. I am planning some more videos soon though hopefully. Got a plane now too so stay tuned. Happy flying.

• 
  @g1zzard638Ай бұрын

  Just got the M2 evo, first flight went terribly wrong broke my prop blades and couple of servo arms. Rebuilt now going right back to basics and have turned my heli right down. Thank you for the video!

• 
  @RCStuffvideosАй бұрын

  Sounds like a good idea! Keep hammering the basics and improve carefully. Enjoy.

• 
  @charlesmyers9765Ай бұрын

  So, one could use mixing to increase pitch/° of bank angle, which would eliminate the need to compensate. It would be difficult to get right, but could be done.🤔

• 
  @RCStuffvideosАй бұрын

  I'm sure you could. I guess it might take some of the fun out of it though? As we want the challenge of flying?

• 
  @ruimessias1302Ай бұрын

  No doubt, one of the best instructions video around! You're a legend for helping so many newbies with such simplicity and explanation! Cheers 🇦🇺

• 
  @RCStuffvideosАй бұрын

  Thanks very much glad it helped

• 
  @sotheamam12442 ай бұрын

  Hi. How do you setting up 3d flight

• 
  @RCStuffvideosАй бұрын

  Just need to set up throttle and pitch curves correct really. So you have idle up and throttle is held the same whether you move collective up and down

• 
  @sotheamam1244Ай бұрын

  Thanks for replying. I need trying to this many but didn't do anything. I keep trying

• 
  @user-gy9hq5cb1f2 ай бұрын

  I have the dxs transmitter that was standard in the package. But They dont even explain what those buttons on top do. I cant find it anywhere. Please help man. Do u have fiver or something? I am willing to pay u to help me learn it.

• 
  @RCStuffvideos2 ай бұрын

  Hi, I'm sure theres a dxs manual online somewhere that should say what they do.. Or what model is it you have exactly?! Maybe the buttons aren't needed for your model?

• 
  @user-gy9hq5cb1f2 ай бұрын

  @@RCStuffvideos i have the same helicopter. Blade 230s. It has a button for 3 modes. Beginner. Intermediate. Expert. Button for smart function Button for toggle thrust or something. I checked the manual. It does not explain it.

• 
  @hustlerkc112 ай бұрын

  I'm sorry but if this is for beginners you lost me in the beginning when talking about all those geometry and trigonometry and no funonometry.

• 
  @RCStuffvideos2 ай бұрын

  Hahah that's not essential just a bit of extra info if anyone's interested

• 
  @HuevosAzules2 ай бұрын

  I still have no clue how to check formware version despite this video or anything online. Look at lights. Cool. dafuq does that mean.

• 
  @RCStuffvideos2 ай бұрын

  Ok can you get to the display that shows you the firmware version? If you tell me which lights are shown I'll tell you the firmware version when I gets chance

• 
  @HuevosAzules2 ай бұрын

  @@RCStuffvideos I finally found what model of microbeast it was. I bought a heli second hand. After a ton of digging I found it was v3.0

• 
  @HuevosAzules2 ай бұрын

  @@RCStuffvideos thank you for helping though

• 
  @antoniofrance82 ай бұрын

  J’ai cette helicoptere et j’ai un servo qui vibre mais qui ne génère aucun default en vol J’ai une question 🙋 J’ai vue que vous aviez un soucis pareils et vous avez repare Ma question est : Est ce que la réparation tien car on m’a dit que sur les servo du k 110 même si on répare les vibration au bout d’un certain temp le problème reviens 😢

• 
  @Ariautoace2 ай бұрын

  Thank you. Taaaaaaaap iiiiiit iiiin.

• 
  @charliesmith22852 ай бұрын

  I’m a brand new rc helicopter pilot. I’ve owned fixed wings before. I have a FlyWing Bell 206 V3 and I for the life of my can’t completely get rid of a vibration on shutdown. It used to do it on spool up as well. I’ve adjusted the main blades many times and can’t seem to get it right although I’ve made it considerably better. Please help.

• 
  @independentmind19772 ай бұрын

  I use the blue on my RC crawler trucks, especially important on driveshaft screws. TIP: heat will help you remove the screw if it's seized, on 1/10 i use a butane torch when required, on 1/24 a soldering iron is best. DO NOT use loctite on screws you suspect are cross threaded or have a damaged head or are stripped in any way as you will NOT be able to remove them later as loctite needs some force. Careful with 1/24 screws as they sometimes can't take the force required to undo a loctite bond (from personal experience, I had to drill a couple out recently)

• 
  @johno95073 ай бұрын

  I had my first heli crash in 36 years because I switched from a servo with a plastic output shaft to a metal one and I forgot to locktite the servo arm screw, and of course it came undone. Heli rolled inverted then plummeted nose first into the dirt...with much laughter from the local kids. I'm just glad no one got hurt. 🇦🇺

• 
  @jenniferliupl3 ай бұрын

  Are you flying with Mode 2 ?

• 
  @RCStuffvideos3 ай бұрын

  Yes

• 
  @jeffrenman41463 ай бұрын

  Thanks for making such a great video… Your explanation the filming everything really helps out. Big thank you

• 
  @RCStuffvideos3 ай бұрын

  Thanks!

• 
  @DavidLoewenthal3 ай бұрын

  will echine e6 transmitter work on my echine e120 rc heli

• 
  @RCStuffvideos3 ай бұрын

  I'm not sure I'm afraid.

• 
  @syoung61263 ай бұрын

  Excellent teaching. Thanks so much!

• 
  @harrychattaway15564 ай бұрын

  Can someone please suggest me a cheap but good Sim to train with, I just bought a mini stunt chopper and want to learn instead of destroying it

• 
  @RCStuffvideos4 ай бұрын

  Try Accurc.

• 
  @heeder7774 ай бұрын

  Nice banked and coordinated turns are not easy. Don’t beat yourself up because it takes lots of practice, at least it did for me. The tapping is something that really helps limit over controlling the bank. Like any other type of maneuver, at some point it will click and you wonder why did I have such a problem. The you start hurricanes and it starts all over again. 😂

• 
  @anusblaster86714 ай бұрын

  Im fixing up an old Trex 450.I hope you will all have a drink or smoke on my behalf if it ends badly.

• 
  @davidjacobs85584 ай бұрын

  lots of time on simulator. and I recommend "Hover Here" simulator, which is free software, but better than most.

• 
  @greggstankowski50734 ай бұрын

  Yup,the RTF transmitters are crap!

• 
  @mattchew834 ай бұрын

  you really sound like darren

• 
  @RCStuffvideos4 ай бұрын

  Who's Darren?

• 
  @very90004 ай бұрын

  Hello 👋 Have you ever used V-BAR NEO?

• 
  @RCStuffvideos4 ай бұрын

  I haven't. what's it like?

• 
  @very90004 ай бұрын

  Это гироскоп

• 
  @mattchew834 ай бұрын

  i really wouldn't oil ANYTHING unless absolutely necessary. it WILL attract dirt/debris over time and .ake things worse

• 
  @RCStuffvideos4 ай бұрын

  Interesting. Cheers

• 
  @redogg27495 ай бұрын

  I can do things on my sim I cannot do in real life. I think it's pure field flying from here out now 😅

• 
  @heeder7774 ай бұрын

  That is a true statement. My thumbs don’t shake and my knees don’t knock flying the sim. When I’m actually flying my subconscious financial advisor is always in the background whispering $1000, $1000 This causes me to fly slow and not try out the stuff I’ve been working on all week on the sim. 😊

• 
  @davidjacobs85585 ай бұрын

  I would recommend “Hover Here” simulator, it’s free but better than most.

• 
  @MisterRedBlueBlur4 ай бұрын

  Same here. Found this freeware game/program yesterday. I have an easy to fly RC Era C187 "without" the optical altitude stabilizer. But even with this one (easy to fly), practice is everything.😁

• 
  @davidjacobs85584 ай бұрын

  @@MisterRedBlueBlur it's an excellent software. not sure why it's not known widely among RC heli community.

• 
  @richardmiddleton77705 ай бұрын

  Grub screw came loose on the tail shaft so you lost tail drive and it spun. Possibly no Loctite on the grub screw or it wasn't located in the dimple/flat on the shaft.

• 
  @LichaelMewis5 ай бұрын

  Im having that same noise issue with mine. Do yoi think it's the belt making that noise or what? Coincidentally I lost my tail (had the tail servo backwards on first spool up) hovered it then tail just blew out and I hit hold mode, slapped it down on tne ground and broke my skid in the same spot as yours!

• 
  @LichaelMewis5 ай бұрын

  Thank you for your suggestions, I will try them.

• 
  @LichaelMewis5 ай бұрын

  How was your loose satellite causing tailwag?

• 
  @crazyboyz84613 ай бұрын

  I saw this video and thought the same thing. I’m assuming that’s why there wasn’t a clip of him flying it afterwards.

• 
  @sasquatchhadarock9685 ай бұрын

  Excellent tutorial. You *almost* had the perfect shutter speed on your camera 😉. My retired dad is trying to get into flying RC helis. I got him a Blade 120 S2 for Christmas and he's enjoying it but between his eyes (trifocals😢) and trying to keep up with everything he has a steep learning curve.

• 
  @Iceking0075 ай бұрын

  What aircraft is this?

• 
  @RCStuffvideos5 ай бұрын

  Blade 230 s

• 
  @giopirmisashvili55146 ай бұрын

  Thank you

• 
  @RCStuffvideos5 ай бұрын

  You're welcome

• 
  @jimreynolds82846 ай бұрын

  Well done

• 
  @260bossute6 ай бұрын

  I am always nervous during hover until the spinning blades of death are up in the sky and out of striking distance.