Building a CNC Marine 6510cc Plate boat. Beginner boat builder, first build. Using a Unimig 200 Pulse with a Unimig push pull gun. Wire is 5183 Ullrich Aluminum.
You need better camera positions!! It’s all a bit distant 👍
@MHD-Fishing11 күн бұрын
just trying to cover as much as i can but ill see what i can do. I now have a camera mount on the console so that should help. also action cameras are a bit like that ill make 1 less wide angle that may help.
@davidgreen158410 күн бұрын
@@MHD-Fishing Did not expect a reply👍Thankyou 👍 I only thought I’d mention it so maybe you’d get more views/subscribers!! After all you’re actually doing it, building it! All I’m doing is watching your efforts😳 And the boat looks bloody fantastic so far. Keep going it all looks great👍especially here in good ol’ Blighty🤗
@hentran384813 күн бұрын
Thật tuyệt vời
@iainhetherington460813 күн бұрын
Love your videos and progress mate , just one thing though the can of acetone just above you when you are welding probably not a good idea, hate to see all your good work ruined by oversight Cheers from down South
@user-jn9zu5ow1e16 күн бұрын
What's the name of the float?
@MHD-Fishing16 күн бұрын
@@user-jn9zu5ow1e it's closed cell foam. I got it a few months ago. I'll see if I can find what.its called
@user-jn9zu5ow1e16 күн бұрын
Thank you.
@user-jn9zu5ow1e18 күн бұрын
What is the name of the float you put on the bottom of the boat?
@jarraydapelt836517 күн бұрын
Boat Float
@MHD-Fishing16 күн бұрын
POLYFOAM SHEETS - EXPANDED POLYETHYLENE - EPE
@user-jn9zu5ow1e16 күн бұрын
Thank you.
@tomosullivanmpbulls23 күн бұрын
Hi I’ve watched your vids looks good ! Do you think a 4.5 to 5m boat would be build able with only 1 person ? Or are two people needed fairly often ? I do have a gantry but am worried about needing two people
@MHD-Fishing23 күн бұрын
2 people just makes it faster mostly it could be done on your own.
@marcianmoon614328 күн бұрын
what welding mask did you use ? did it have an air filter? is filtration any good ?
@MHD-Fishing27 күн бұрын
I used the Unimig PAPR filter system when doing alot of welding especially in the boat. I also had an extraction fan to remove gas and smoke. When I do a quick weld and don't use the filter I have noticed it makes a huge difference.
@marcianmoon614327 күн бұрын
@@MHD-Fishing cool thanks , do you think its doable by a single person? have you built boats before?
@MHD-Fishing26 күн бұрын
@@marcianmoon6143 probably more. When I get a helper a lot more gets done. No never built a boat before. I have done an aluminium boat building course.
@marcianmoon614326 күн бұрын
@@MHD-Fishing im planning to do the course too this year, i was thinking of starting with a smaller project first , maybe 4m dingy or CC. and then maybe 5.5m hard top
@chrismccran423Ай бұрын
Loving the videos. How much welding experience did you have before starting?
@MHD-FishingАй бұрын
Not a lot learning more as i go. I have done a aluminum boat building coarse it helped with construction techniques. Welding well you just need time on the gun.
@danielaldridge7966Ай бұрын
Fuck yeah looks good gents Wish I could weld and make a boat like you can
@fuzznut25Ай бұрын
Looks good. What thickness is the metal?
@MHD-FishingАй бұрын
5mm hull 4mm sides and floor
@gcroofandgutter7070Ай бұрын
Projects coming along great mate. Did you have much in the way of experience welding ally before building the boats?
@MHD-FishingАй бұрын
Nah made a few aluminum ramps for friends the occasional roof rack. a fuel tank or 2 this is my first boat build.
@therukugorillazaotearoa_Ай бұрын
Is that unimig 200 pulse with push pull gun or just standard ??
@MHD-FishingАй бұрын
Not standard but the push pull gum is awesome and a must for a job like this
@therukugorillazaotearoa_Ай бұрын
@@MHD-Fishing Thanks did you modify the welder to take beaver wire ?
@MHD-FishingАй бұрын
@@therukugorillazaotearoa_ yes made a holder for the roller and drilled a hole in the back of the machine.
@therukugorillazaotearoa_Ай бұрын
@@MHD-Fishing nice mate cheers for that
@martysprojectsАй бұрын
Hi been watching your build, looks like she's going to be a good boat, what length is it? I've been building a hmd kit on my channel, my first build big learning curve but enjoying it, good luck with the rest of the build, cheers Marty
@MHD-FishingАй бұрын
6.5m CC it's called MHD because it stands for Mental health day. For when i need a break from work.
@neilmaverick7035Ай бұрын
As your spending so much time on this build How about naming the boat Mistress
@MHD-FishingАй бұрын
Well not a bad suggestion but MHD stands for Mental Health Day like when I need a break from work.
@neilmaverick7035Ай бұрын
I would make a rotisserie, would save you heaps of time
@MHD-FishingАй бұрын
I had access to one i thought about it i really did but it wount spin under the mezzanine.
@neilmaverick7035Ай бұрын
What is the power plant you are proposing to use ? I can see your loosing some weight as well, keep at it 💪
@MHD-FishingАй бұрын
can take up to a 250hp I'm planning on a 200hp Mercury
@neilmaverick7035Ай бұрын
Check out some of the Japanese import motors Most have run in freshwater lakes
@neilmaverick7035Ай бұрын
Looks amazing quality
@MHD-FishingАй бұрын
Cant complain at all. It was solid when tacked now its just crazy how strong it is.
@zanelorimer4030Ай бұрын
You make it look almost like fun , loved the straps and comealong . Wish i had thought of that.👍 Beautiful work
@MHD-FishingАй бұрын
Thanks 👍
@leocan3659Ай бұрын
Como definir as pontas do fundo em v?
@MHD-FishingАй бұрын
will roll in 2 days you will see more of the bottom after that
@bthurlow19802 ай бұрын
How many days or hours to this point mate? looks great
@MHD-Fishing2 ай бұрын
I Got it mid January. Its hard to put a number on it. I don't like working on it in high humidity. And it's been high humidity alot. Longer than unwanted but when I get at it it goes together well and quickly
@SeralheriaOficinaDeMadeira2 ай бұрын
Vou construir uma navegação para mim, Qual maquina de solda usar?
@MHD-Fishing2 ай бұрын
Hard to say not sure whats avalible to you. Id suggest a pulse Mig with either a push/pull gun or a spool gun.
@SeralheriaOficinaDeMadeira2 ай бұрын
Otimo trabalho!....
@MHD-FishingАй бұрын
thanks
@6knots62 ай бұрын
Nice one , I’m getting a 6.5m cc built as we speak, what engine you putting on her and what sort of fitout electronics ect , just after some ideas as I’m doing the fitout on mine myself cheers for the videos
@MHD-Fishing2 ай бұрын
200hp mercury DTS and 2 12" Lowrance sounders projects battery dcdc charger and solar panel
@dougmcgavin42672 ай бұрын
Looking good mate. like video thanks 👌💪🍺
@MHD-Fishing2 ай бұрын
Thanks 👍
@nickhayden10853 ай бұрын
How much did the cnc cost?
@MHD-Fishing3 ай бұрын
Costing is on their site cncmarine.com.au/product/6510cc/
@nickhayden10853 ай бұрын
Did you made the engineering plan of blue print? Where did you bought that long of a aluminum sheet, nice project i am excited to to see it finished
@MHD-Fishing3 ай бұрын
its a CNC Marine Kit. I bought it off one of their designs. They cut it and supply all the materials for the price. cncmarine.com.au/product/6510cc/
Пікірлер
Coming along great Raymond!
You need better camera positions!! It’s all a bit distant 👍
just trying to cover as much as i can but ill see what i can do. I now have a camera mount on the console so that should help. also action cameras are a bit like that ill make 1 less wide angle that may help.
@@MHD-Fishing Did not expect a reply👍Thankyou 👍 I only thought I’d mention it so maybe you’d get more views/subscribers!! After all you’re actually doing it, building it! All I’m doing is watching your efforts😳 And the boat looks bloody fantastic so far. Keep going it all looks great👍especially here in good ol’ Blighty🤗
Thật tuyệt vời
Love your videos and progress mate , just one thing though the can of acetone just above you when you are welding probably not a good idea, hate to see all your good work ruined by oversight Cheers from down South
What's the name of the float?
@@user-jn9zu5ow1e it's closed cell foam. I got it a few months ago. I'll see if I can find what.its called
Thank you.
What is the name of the float you put on the bottom of the boat?
Boat Float
POLYFOAM SHEETS - EXPANDED POLYETHYLENE - EPE
Thank you.
Hi I’ve watched your vids looks good ! Do you think a 4.5 to 5m boat would be build able with only 1 person ? Or are two people needed fairly often ? I do have a gantry but am worried about needing two people
2 people just makes it faster mostly it could be done on your own.
what welding mask did you use ? did it have an air filter? is filtration any good ?
I used the Unimig PAPR filter system when doing alot of welding especially in the boat. I also had an extraction fan to remove gas and smoke. When I do a quick weld and don't use the filter I have noticed it makes a huge difference.
@@MHD-Fishing cool thanks , do you think its doable by a single person? have you built boats before?
@@marcianmoon6143 probably more. When I get a helper a lot more gets done. No never built a boat before. I have done an aluminium boat building course.
@@MHD-Fishing im planning to do the course too this year, i was thinking of starting with a smaller project first , maybe 4m dingy or CC. and then maybe 5.5m hard top
Loving the videos. How much welding experience did you have before starting?
Not a lot learning more as i go. I have done a aluminum boat building coarse it helped with construction techniques. Welding well you just need time on the gun.
Fuck yeah looks good gents Wish I could weld and make a boat like you can
Looks good. What thickness is the metal?
5mm hull 4mm sides and floor
Projects coming along great mate. Did you have much in the way of experience welding ally before building the boats?
Nah made a few aluminum ramps for friends the occasional roof rack. a fuel tank or 2 this is my first boat build.
Is that unimig 200 pulse with push pull gun or just standard ??
Not standard but the push pull gum is awesome and a must for a job like this
@@MHD-Fishing Thanks did you modify the welder to take beaver wire ?
@@therukugorillazaotearoa_ yes made a holder for the roller and drilled a hole in the back of the machine.
@@MHD-Fishing nice mate cheers for that
Hi been watching your build, looks like she's going to be a good boat, what length is it? I've been building a hmd kit on my channel, my first build big learning curve but enjoying it, good luck with the rest of the build, cheers Marty
6.5m CC it's called MHD because it stands for Mental health day. For when i need a break from work.
As your spending so much time on this build How about naming the boat Mistress
Well not a bad suggestion but MHD stands for Mental Health Day like when I need a break from work.
I would make a rotisserie, would save you heaps of time
I had access to one i thought about it i really did but it wount spin under the mezzanine.
What is the power plant you are proposing to use ? I can see your loosing some weight as well, keep at it 💪
can take up to a 250hp I'm planning on a 200hp Mercury
Check out some of the Japanese import motors Most have run in freshwater lakes
Looks amazing quality
Cant complain at all. It was solid when tacked now its just crazy how strong it is.
You make it look almost like fun , loved the straps and comealong . Wish i had thought of that.👍 Beautiful work
Thanks 👍
Como definir as pontas do fundo em v?
will roll in 2 days you will see more of the bottom after that
How many days or hours to this point mate? looks great
I Got it mid January. Its hard to put a number on it. I don't like working on it in high humidity. And it's been high humidity alot. Longer than unwanted but when I get at it it goes together well and quickly
Vou construir uma navegação para mim, Qual maquina de solda usar?
Hard to say not sure whats avalible to you. Id suggest a pulse Mig with either a push/pull gun or a spool gun.
Otimo trabalho!....
thanks
Nice one , I’m getting a 6.5m cc built as we speak, what engine you putting on her and what sort of fitout electronics ect , just after some ideas as I’m doing the fitout on mine myself cheers for the videos
200hp mercury DTS and 2 12" Lowrance sounders projects battery dcdc charger and solar panel
Looking good mate. like video thanks 👌💪🍺
Thanks 👍
How much did the cnc cost?
Costing is on their site cncmarine.com.au/product/6510cc/
Did you made the engineering plan of blue print? Where did you bought that long of a aluminum sheet, nice project i am excited to to see it finished
its a CNC Marine Kit. I bought it off one of their designs. They cut it and supply all the materials for the price. cncmarine.com.au/product/6510cc/
Amazing
Thanks