Appliance Repair Step by Step! In this Channel, We Make Do-It-Yourself Repair Videos for All that are Handy! Make Sure to Subscribe So You Don't Miss an Upload!
**Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk. DIY Repairs Now, its Creators, Technicians, and/or Affiliates are Not Responsible for Any Property and/or Personal Damages. Please be Advised.
- DIY Repairs Now
Пікірлер
Awesome got it fixed for my new girlfriend 😂 thanks
My washer does not have the agitator. Is this process the same for mine?
What is the problem
how to use whirlpool 7 cycles and 2 speed combination
Thanks for the helpful video. I’m trying to figure out if my agitator part is screwed up again or if it’s the actuator that needs to be replaced.
Thank you, sir, this all helped, immensely. I had forgot the trick for the belt, when I did my drum rollers a year or two ago, but you went over that really well, too.
MVP
Thank you! You don’t know it but you and I did that together!!
I didn’t hear anything
I replaced the shocks and is still shaking like crazy
i repaired many of these. if you push the center of the tub and it does not bounce up and down. your suspension rods are in good shape. What you wanna check to see is if the inner tub is stripped out around the shaft of the gearcase. to check you have to spin the inner tub and see if it spins in a straight circle. if it wobbles as it spins or look as if the tub is going over a hump. you have a stripped inner tub and have to replace tub. getting a new one may be a better option if this is your problem
Hi bro, Definitely, is it always the gate? Or is there another reason why I have the error code "h1"
Lol you do this everyday I have never done this and thyou and pretty much figured to use the old struts to do the same thing as the waste time funny piece of wire. I just popped old strut out then slide new one in it's place stuck old strut down in hole from top pulled up and done I literally did this project with one screw gun with no bit on all guns it's 1/4 inch so that fut right on screws lol then a metal pry pic like dentist use and my hands washer all fixed good as new thanks for video
The burned out resistor is the fan resistor did you have to replace the evaporator fan motor in the freezer as well?
Hello sr am from Trinidad and Tobago don't know if you can assis me my main board burn I replace the board with an universal board am getting power to the display PANIL but the display board and compresor not coming on
Man i did the repair with shocks, it took about 15-20min. It worked great for a few days and then the shacking came back! After watching your video I realized i must have done something wrong, so I looked again and I guess one of the plastic pieces came off from the top of the hook, i just put back and added a load, well see if makes a difference.
thanks so much for your detailed videos. God bless you.
Thank you and You are so welcome!
Perfect tutorial
Thank You!
I have a different model number it is DV42H5200GP/A3
Based on the Model You Provided, The Board Linked in the Description Will Fit Your Model.
Thank you!
You're welcome!
I'd love to see u do the dryer to the set. Hope you have the same great energy doing the dryer because I heard they can give u lot of trouble. Did u hear that as well?
I so appreciate this video. We had a technician who fixed our ice build-up 2 months ago for it to do the same thing. I wished you lived in our state so I would not have to buy a new appliance. I was able to get all the ice off thanks to your demo so I can keep my food till the new appliance arrives. Thank YOU!! So much. You are a good human.
Glad it helped!
hi! i have exact unit working on the other day. However, the issue is the display and interior lights are blinking. do you think its a board problem as well? thanks hope you can see this comment.
my fridge was frozen and the whole bottom was filled with ice - I took my panel off and there was ice just like in the video - only more. The entire drain was iced up. Thanks for the detailed video. Tomorrow i'm off to get a steamer.
You are Very Welcome! It’s great to hear that My Video Was Helpful! Thanks for the Support!
So does the booster kit replace the heater you installed? It seems like either or for those. Secondly, if I order the booster kit do I still need the ground wire? Thanks
Yes, It would be Either the Booster Kit or the Heater that I used in the Video. If you decide to Use the Booster Kit, You Should not need the Ground Wire, as it Should Bring Everything You Would need.
The best step by step video I've seen to date! You, sir, are a master at your craft. Definitely recommend it to all my family. Thank you for the links as well, lots of other technicians are doing away with them. Really appreciate your hard work!!! Gracias!
@@Pancholoco1870 you’re welcome thanks for watching my video💯👍🏻
tip for anyone changing these solo, i would change the rods one at a time. My dumbass did all 4 at once and it tip over with nothing holding it up. Needed a second person on the opposite corner and lifted it with the new rods at the same time.
Just FYI, You can also cool the thermostat to below 30 buy turning a can of air blaster upside down and bathe it in the liquid propellant.
Thanks for the video! Very helpful, I replaced mine today!
Great to hear! Thanks for watching!
Thank you for this video. You are a great teacher! We ordered the parts today!
Glad it was helpful! Thank you for the Support!
I installed a new icemaker and this is exactly what is happening! Of course, my husband took about a month after the purchase before he installed it, and another 2 months trying to figure out why it was not working, so now I can't return it!
I have the same stove, could you give me the link to buy the glass, please?
Wasnt there a recent recall on these washers ??? I just bought one a Year ago and now its doing the same thing so im calling their corporate office and tell them to take care of this problem asap.
Thank you so much for this video!!! You are a lifesaver! My son and I repaired the water dispenser/ice maker with this fix! All for about $50! You’re the BEST! 😊
Fantastic! Glad My Video Was Helpful! Thanks for the Support!
You're the best. Thanks for educating us
My pleasure!
Why de housing failed?
Thanks for the great video. I ended up not being able to see the obstruction inside the pump motor from the inlet, so I popped off the top and found a nail with its head broken off was able to slip in and jam the blades. Too many DIY projects the last few weeks I guess.
Yes, Sometimes if you forget to Empty out Pockets, things can get Stuck in the drain pump. I am Glad you found My Video Helpful! Thanks for Watching!
thanks brother, exactly what i was looking for
No problem 👍 Glad I Could Help!
Absolutely helpful! Was able to save some money with your help! God bless ya man!
Great to hear! Happy that My Video was Helpful! Thanks for Watching! 👍🏻
Thanks for documenting this! Gave me the confidence to dig in and get this done.
You can do it! Glad My Video is Useful! Thanks for Watching!
Excellent video. I quickly diagnosed the problem using these instructions and fixed it the next after I got the correct part. Thank you very much.
Glad it helped! Thanks for Watching!
Great video! Fixed my problem!
Great to hear! 👍🏻
Changed the shifter, splclutch,belt and pully, washer still has slow weak doesn't really spin hardly agitate ? Any ideas. Bravos matag washer mvwx655dw1
Thank you! I have the same washer same problem thanks to your video is fixed!!😊😊😊😊😊😊😊
Happy to Help! 👍🏻
Amazing Video ❤ saved 700$$ thank you ❤
You're welcome! Glad My Video Was Helpful to you! 👍🏻
good afternoon, i nedd thats fan , where i get thats fan, in my country can not get the fan pls
Nice video! I have a different type of dishwasher and here what happens: My dishwasher is over 20 years old (Kitchen Aid KUDI01DLBS0), and it started leaking from the bottom (on the right side of the door). I opened the bottom cover/panel and ran the Normal Cycle while watching it with a flashlight where the leak came from. It took about 15 min, until you could no longer add any more dishes and the cycle started. That is the time that i see it starts leaking, not from the bottom of the inlet valve but somewhere from above the valve visible part. What can this be? If there is an issue with the inlet valve it should start leaking as soon as you start the cycle? No? Thank you in advance.
This DYI saved me a lot of money. BIG THANKS!!
Glad I could help!
I have this EXACT Samsung fridge for about 10 years this year, got it from HHGREGG. And mine just started freezing up too..and fan stopped also, due to ice build up. And fridge keeps making noise from fan blades hitting ice. Had someone came and replace the entire back panel last week. Today, it stopped working again. Im defrosting it now..11:35pm..dont have the time to wait for 24 hours..just came from the grocery store..with groceries. So, thanks for this video..will eatch till the end to see how to fix the problem permanently. This is a beautiful refridgerator. I dont care whether the ice maker works or not..im more concerned about the refridgerator. Thanks for your video. Very thorough..very helpful.
Yes, That Could be a Possibility.
Did the same thing mine still shakes and causes the machine to beep 4 times