Пікірлер

• 
  @JamesBond-lj1qv5 сағат бұрын

  When the exhaust is closing and inlet is opening.. you are on the rock. Thanks man…

• 
  @twincam88889 күн бұрын

  Thanks for posting this but get 4 paper clips and big rubber bands or small bungee cords and pull the push rod covers up out of the way.

• 
  @gregburgess688415 күн бұрын

  Hey man, Question . I've got a 99 sportster that's blowing oil out the trans vent tube. Any idea what it could be. Hell yeah on the bike bro

• 
  @KWlion17 күн бұрын

  I took several 2 to 3 k tours on my Silverwing with no problem. Wish I still had it !!

• 
  @fixingorflipping15 күн бұрын

  That’s rad!

• 
  @Evochoppers18 күн бұрын

  Great video! helped alot with installing my pushrod's👍🏻 , as a learner does the sideplay make any difference?

• 
  @mr.mcflyxd921120 күн бұрын

  what advice would you give when it comes to motorcycle parts what should sold and shipped and what shouldn't be sold

• 
  @fixingorflipping18 күн бұрын

  Hey! It is really up to you! We sell mostly everything that we can verify the condition and measurements. Sometimes used motor parts are hard because you don’t always know how many miles or condition of the motor it was taken out of. Bulky items (tanks, fenders, wheels) require more time and patience when shipping but are totally doable. Thanks for watching 🤘

• 
  @adamparker569622 күн бұрын

  I used four small bungees to lift all four covers while you’re workin on em, much less frustrating 👍🏼

• 
  @wudaa252424 күн бұрын

  I don’t feel sorry for anyone that gets scammed on these Facebook groups. There a guy and myself that took It upon ourselves to start warning naive people in three of the groups we are in and we both gave up. The scammers either blocks us immediately or the potential victim continues to chat back and forth trying to set up a deal. Few days later there’s always a post from the victim about being scammed. It never fails. Most of them deserve It at this point.

• 
  @rodkramer887927 күн бұрын

  I just bought a 04 at a brokerage. They were going to deliver it. One of the holddown straps broke the starter button off. Really ticked me off. Been waiting for almost a week for it. They are going to fix it but have to wait for the part.

• 
  @fixingorflipping25 күн бұрын

  Oh no! That’s sucks for sure.

• 
  @acuraonly29 күн бұрын

  Great video man thanks!!!

• 
  @fixingorflipping25 күн бұрын

  Thanks for watching!

• 
  @santana45vАй бұрын

  Have a burgundy silver wing just like it . Bought it 3yrs ago. Best thing I bought.

• 
  @fixingorflipping29 күн бұрын

  Very nice!

• 
  @overcomerarchery2870Ай бұрын

  The best simplest video yet!

• 
  @fixingorflipping25 күн бұрын

  Wow, thanks!

• 
  @carelocotvАй бұрын

  Beothherr where can I buy your windscreen?

• 
  @carelocotvАй бұрын

  Brother where so you buy that windscreen?

• 
  @fixingorflipping25 күн бұрын

  We bought it locally off of Facebook marketplace.

• 
  @RatridezАй бұрын

  Looks good man nice job , I always thought about a 1500 wing engine in my electra glide to piss of my harley buddies lol

• 
  @fixingorflipping25 күн бұрын

  Thanks for watching and taking the time to comment!

• 
  @Ratridez24 күн бұрын

  @@fixingorflipping 🏍

• 
  @Chancho66Ай бұрын

  paper clip and a rubber band to hold covers up. also when cam lobes are down 'base circle' piston is up on TDCC. top dead center compression. so you did it correctly and had it on TDCC :)

• 
  @Chancho66Ай бұрын

  Kinda disappointed to see a RockStar drink and not a can of Busch Heavy...lmfao

• 
  @fixingorflippingАй бұрын

  Hahaha

• 
  @jeffreymiller5304Ай бұрын

  39 years wrenching. A.S.E. Master tech. L1. This is the BEST a$$ thing I have seen in decades. Found it by accident, but I think I am gonna subscribe.

• 
  @fixingorflippingАй бұрын

  Thank you! We truly appreciate it.

• 
  @LonnieOwen-ch5sgАй бұрын

  Why didn't you ride it. I have the same bike.

• 
  @rodkramer887925 күн бұрын

  Kind of a pain in the axx place to ride out and only riding motorcycles and not a scooter before.Wish I would have now.

• 
  @lesismorepowell5270Ай бұрын

  Wow you have really made it so simple man I don’t do good with reading how to do things like this and I have done it before but it’s been 16 years and can’t remember how to do it right

• 
  @fixingorflippingАй бұрын

  So happy it helped!

• 
  @knotyourguru2 ай бұрын

  Sweet Mullet!

• 
  @fixingorflippingАй бұрын

  Thanks 🤘

• 
  @Cbgrandtheftauto2 ай бұрын

  I hate the customers that purchase your part for a lowball offer then starts asking questions on what it fits 🤦🏻‍♂️ I had one asked 20 questions and wanted more pictures afterwards only to tell me he didnt like something about it and wasnt going to pay for it. Blocked immediately and reported to Ebay..🙄

• 
  @fixingorflippingАй бұрын

  It’s wild out there! 🤣🤘

• 
  @Cbgrandtheftauto2 ай бұрын

  I do a limit on my best offers to prevent lowballs. I make my offer limit the lowest I am willing to take. Video games are the worst for lowballers. Not sure if its just people trying to get something for nothing like you said or if they are also resellers trying to get it cheap to resell for their own. I do free shipping on anything that will cost me $10 to ship and just mark the price up that much. Car parts I make them pay shipping. The shipping pays my time boxing it up. I also dont do returns unless I screwed up or if they do reach out, but they pay for return shipping. If they do all that, I'll refund them no matter what!

• 
  @fixingorflippingАй бұрын

  Those are all good practices!

• 
  @TraciiWalters58132 ай бұрын

  Does Harly Davidson chopper parts ring a bell?

• 
  @fixingorflipping2 ай бұрын

  It does not. Thanks for watching.

• 
  @JeffGillis-lv1rz2 ай бұрын

  Walk around with no rake and trail specs, nor frame geometry such as down tube stretch and bends… very interesting bike, this walk around video is a waste of time.

• 
  @user-lr3di2gp7o2 ай бұрын

  Da fack is that 😂😂😂😂

• 
  @Adam2Waite7 күн бұрын

  Harley fxr chopper

• 
  @BrewCityRider2 ай бұрын

  Hell yeah, this one's going in my Save folder for when I have to do this job. Great simplified instructions! 👍 I get a headache watching most other vids on this subject 😂

• 
  @fixingorflipping2 ай бұрын

  Thanks for watching!

• 
  @jcd12782 ай бұрын

  Great work... most videos made it sound like you're supposed to adjust the cylinder on the bay circle.. good job explaining

• 
  @fixingorflipping2 ай бұрын

  Thanks for watching 🤘

• 
  @gvaldezcurrie2 ай бұрын

  So less complicated mucho Thanks

• 
  @fixingorflipping2 ай бұрын

  Happy it helped!

• 
  @gvaldezcurrie2 ай бұрын

  @@fixingorflipping I just performed your technique on my pushrods and Absolute Perfection. If you ever come to So Cal Drinks on me.

• 
  @lengthoftheeye2 ай бұрын

  where'd you get the drink holder? :0

• 
  @jaybourbon86082 ай бұрын

  So I have a softail evo here and I want to adjust the pushrods. The bike is noisy right now so I am sure it needs to be adjusted. My question is. With them all ready pre adjusted in the bike. Do I just get the cam to poition, and then adjust them to slight lash?

• 
  @fixingorflipping2 ай бұрын

  I would totally back them off and start over with the adjustment process. Usually once pushrods have been adjusted correctly, they don’t require re-adjustment. So if the bike was quiet and then over time got noisy,, you could have a bad lifter.

• 
  @user-ru2pi4kg2i2 ай бұрын

  I meant to start a button on my bike, O2 Valkyrie nothing response

• 
  @Jeff825563 ай бұрын

  Out of all the "adjust pushrod" videos I watched, yours was the icing on the cake. I did exactly as you instructed, ignored such things as TDC, and had no knowledge of my brand names to use any such calculator charts (flats info etc), and now my bike runs perfectly after a complete rebuild! I cannot thank you enough for solving what I believed was a mysterious pain in the ass problem with no solution in sight. THANKS!!!

• 
  @fixingorflipping3 ай бұрын

  Hell yeah!!! Glad we could help

• 
  @jaybourbon86082 ай бұрын

  I am here trying to find out the same info as I just vought the bike and have no idea how many turns to do on teh nut after zero lash. How many did you do?

• 
  @JerBear_19893 ай бұрын

  I know it could be done! Great job Josh!

• 
  @fixingorflipping3 ай бұрын

  🤘🤘🤘

• 
  @snkrlol3 ай бұрын

  Frank Josh used motorcycle parts is he legit. I need a reputable motorcycle parts seller

• 
  @dennislyons87203 ай бұрын

  Love them Valkyries. I've had 3.

• 
  @fixingorflipping3 ай бұрын

  Very cool 🤘

• 
  @blumac98013 ай бұрын

  If your ignition coils were original then they would have a yellow sticker on top with the Motorcraft logo. These are replacement Motorcraft coils so they were changed fairly recently. I would say the spark plugs were done at the same time in your case. Just changed my coils a bit ago and come to find out we hadn't changed them since we got the Ex in 2000. The coils were manufactured in 1997!

• 
  @PCMrealtymgt3 ай бұрын

  I sell mc parts on eBay as well, I am sure you know, but Shopify has built a few sites for other selling parts...

• 
  @fixingorflipping3 ай бұрын

  We actually are working on getting all of our items onto Shopify this week!!

• 
  @sbramel933 ай бұрын

  Thanks for the informative video. I just bought a Class C RV with the 6.8 so it’s nice to see how much work goes into this job compared to a 5.4. They also sell affordable magnetic spark plug sockets. I paid around $20 on Amazon for a pack of three different sizes.

• 
  @williescott49833 ай бұрын

  Thank you very much

• 
  @straigh1tkush4 ай бұрын

  random question, but how does this bike do going over potholes?

• 
  @fixingorflipping3 ай бұрын

  It was pretty harsh to be honest. That’s the only reason I didn’t keep it. I completely rebuilt the forks and put new progressive rear shocks on it and the ride was still rougher than I like

• 
  @annbullock76224 ай бұрын

  Definitely go for Avon cobra chrome tyres they suit the valkyire, I have a 1997 they can definitely get up and go you can also plod in 5 at 500 rpm the only thing sort of wrong !! it needs a rev limiter , I've gone through the red line a few times , much miss under stood bike

• 
  @robertlopez98324 ай бұрын

  Bro thank you so much your method it work for me started my Evo up today after a few months of trying to figure out how to installing ajustable push rods thanks again happy trails

• 
  @fixingorflipping3 ай бұрын

  Glad it helped 🤘

• 
  @jazzsounds81593 ай бұрын

  ​@fixingorflipping could you please do a video on base gasket and lifter block gasket 96 evolution motor. I wish mine would stop leaking. Great video on push rod adjustment. 0:41

• 
  @user-gy7rc8sb5v4 ай бұрын

  I got a Ford 1999 V10 super duty 4 * 4 go down the road and runs when I first crank it come back home cut it off it won't crank back up what causes that

• 
  @shovelheadSC07094 ай бұрын

  Nice😎🤘🏼

• 
  @ChristopherGraf7024 ай бұрын

  thanks for helping me understand this. your video is perfect thank you

• 
  @fixingorflipping4 ай бұрын

  Glad it helped!

• 
  @powerofone16454 ай бұрын

  Tip over sensor. That would have driven me crazy.

• 
  @artvondrak16384 ай бұрын

  Ok so what happens if when they bleed down you still can't free spin them? Just back them off a little more til they free spin? I'm still unclear on this and I'm going to install a 1275 kit with SE heads on my Sportster. So please reply. Thanks.

• 
  @HRMartin-ud1gf21 күн бұрын

  If they don't bleed down to the point where you can spin the rods with your fingers, you most likely turned more flats than is required for your specific push rods. Check your threads per inch and correct accordingly. S&S quickie push rods are 4 turns (or 24 flats) for example. Other brands may only require 3 turns, (18 flats).

• 
  @mercedesmaintenance.63394 ай бұрын

  I'm doing that job today on a e450 van. Access is not as bad as I first thought. First pliug i pulled had a huuuuge plug gap close to 0.075!!! Thanks for your time. Cheers John

• 
  @fixingorflipping3 ай бұрын

  Nice work!

• 
  @newenglandlife9784 ай бұрын

  Big country!!!! Haha. Great video. Helps with my research

• 
  @fixingorflipping3 ай бұрын

  Glad you enjoyed!