Пікірлер

• 
  @p3tkov6 күн бұрын

  The walls and ceilings are not protected from the spraying. How do you treat them later to avoid any flashing from the wood paint? If I spray the walls with mat paint later, will the mat paint cover the wood paint?

• 
  @Di1646025 күн бұрын

  Do you have that special extension on so you can keep stop starting without it spitting or is that just your preferred size extension?

• 
  @leebo5555666Ай бұрын

  Hiya mate, just bought ordered one of these, do you know if there safe to power microwaves?

• 
  @Di16460Ай бұрын

  What primer is good for spraying I use crown acrylic primer

• 
  @DaveHabbickАй бұрын

  Thanks, you might have made my mind up on which machine to go for.

• 
  @paullynch67182 ай бұрын

  Arroworthy classic for me amazing brush 👌

• 
  @JTmusic92 ай бұрын

  What gun you using and are you using oil??

• 
  @jackjax5322 ай бұрын

  finally a brush that gives you a full fan.

• 
  @chriswebb3832 ай бұрын

  Corona

• 
  @TheOlzee3 ай бұрын

  Hey mate. When you run around the tops with the mini roller is that just to get the texture or does it kind of double the walls saving you from cutting it in twice?

• 
  @zeejay49623 ай бұрын

  Mine did nothing. It’s priming but not spraying!

• 
  @omaniomani14063 ай бұрын

  💪🏿💪🏿👍🏿

• 
  @drblaze38504 ай бұрын

  Bo' Selecta!

• 
  @sail42015 ай бұрын

  Thanks so much. Exactly what I needed

• 
  @lukestones40995 ай бұрын

  Hey mate after uve undercoated the woodwork and are spraying the walls do you just get the emulsion on the edges of frames on tops of skirts ? Just wondering as I'm gonna use your method

• 
  @user-ki5ju6tq6k5 ай бұрын

  Just mask the walls problem solved

• 
  @beebeesmith5 ай бұрын

  Why film straight into light, you are nuts 🥱

• 
  @jlbradders6 ай бұрын

  So do you have to mask up the skirting after then cut in the wall? Or does this only really work when same paint is used on wall and skirting?

• 
  @Adam-ui3ot6 ай бұрын

  Is the Greco decent with emulsion?

• 
  @guyanagold48697 ай бұрын

  Did you let each side of the doors dry before turning them over?

• 
  @lewisstefan22697 ай бұрын

  Good evening Cam I’ve been watching your videos for a while I’ve got a question I’m having murders when undercoating mate gun clogs constantly soon as change the tip and start spraying the walls with emulsion it’s perfectly fine have you got any suggestions please

• 
  @simonbrennan59447 ай бұрын

  Great tips thanks, I am going to get one.

• 
  @russellfreestone85807 ай бұрын

  A lot of work,but it looks very smart.

• 
  @spiritusinfinitus7 ай бұрын

  What an awesome.channel this is. Thanks so much for putting all these great videos up here. Been learning so much from you.

• 
  @blakewilkerson96957 ай бұрын

  Try the “Purdy clear cut elite brush if you like firmness

• 
  @madey3338 ай бұрын

  I have three days remaining on this current job and my sprayer stopped priming. Thank you for this video! Back to work in just 30 minutes!

• 
  @bradleymitchell49668 ай бұрын

  We need hinge savers 😅

• 
  @TomzHDGaming8 ай бұрын

  Hi, this video was uploaded 5 years ago and your recommendation was the Graco 390. 5 years on, what's your thoughts still Graco or Tritech t5? I'm thinking about investing in a gun and have my mind set on the T5 + are you still using the Stephill generator? Keep up the work, thanks!

• 
  @age_of_reason8 ай бұрын

  I just repacked my Graco 395st but it won't prime. I followed the instructions meticulously. This is the 3rd time I've repacked it in 20 yrs and I have tons of pictures and notes so I know what I'm doing. It's got a new piston too. The cylinder is in good shape. Hoses are clear, no obstructions. Wacking it with hammer didn't help. Any ideas?

• 
  @markn73618 ай бұрын

  This worked for me. Thanks a million!

• 
  @denisconor6488 ай бұрын

  Great stuff

• 
  @Brushslinger19858 ай бұрын

  Never had issues with this 3m machine until recently. Bought two more same problem. Bought one from all pro and no issues.

• 
  @Cratos988 ай бұрын

  Hello mate, what you recommended between graco 595, tritech t5 and wagner sf 23 pro?Thanks in advance

• 
  @sanbucaone9 ай бұрын

  Hi colin, what brand is your 6” spray extension. Are the generic brands worth going with. I’ve see some I believe “ses extensions” or better to go with known brands. Enjoying your back log of your videos. Just found you.

• 
  @MrLeshop9 ай бұрын

  Hiya Colin. Well only Friday I pick that T5 up and I have to agree with you I too think it's better than the graco never missed a beat and that consistently in the pressure

• 
  @SocketSaver9 ай бұрын

  Thank you @camdecorations9779 for your review of our Socket Savers. Much appreciated. Very informative video. Thank you also to all for great comments. 👍👏

• 
  @New-Breed-Drywall-And-Paint9 ай бұрын

  Man cam you channel is so underrated. Keep posting . You’re gonna wake up one day to crazy views … you gotta post post post . As A painter for a living your tips are def pro tips and the realist . More of a pro Chanel for sure

• 
  @JONO36799 ай бұрын

  Takes a few minutes to clean. Swap paint for water take tip out of gun lower pressure spray paint back into bucket when you see water spray water back into water bucket. Done

• 
  @brianroche81639 ай бұрын

  Great to see you back Colin, what a great bit of kit. Mine on order thanks.

• 
  @DEANODALGLISH9 ай бұрын

  Just order some .. Thank you

• 
  @JONO36799 ай бұрын

  It takes 5 mins to clean a machine... swap paint for water take tip out spray paint back into paint bucket till you see water then spray the water back into the water bucket and thats it... your done..

• 
  @NotMyProblemSon9 ай бұрын

  Brilliant. I detest masking sockets because the patcher gets more aims on the socket than around them. I’ve ordered 2 packs to try them out. I’ve learnt so much from your videos 👍

• 
  @marsdencarl899 ай бұрын

  Been a while since youve uploaded cam how you doing?

• 
  @camdecorations97799 ай бұрын

  Not bad mate , I'm going to upload more content again. Going a bit more in depth with spraying

• 
  @marsdencarl899 ай бұрын

  @camdecorations9779 looking forward to more content mate 👍🏻 quick question for you have you ever sprayed johnstones aqua waterbased satin?

• 
  @camdecorations97799 ай бұрын

  spraysocketsaver.co.uk/

• 
  @jktrading65289 ай бұрын

  Where do I get those?

• 
  @camdecorations97799 ай бұрын

  spraysocketsaver.co.uk/

• 
  @AlexKunstar9 ай бұрын

  Very cool!!! Looks like a huge time saver if you're on a project where removing the cover plates is an option.

• 
  @soundtrap18129 ай бұрын

  Did you buy enough packs to do the whole house? Or do you move them from room to room as you go? Because they seem quite pricey! £20 for only 5

• 
  @camdecorations97799 ай бұрын

  I brought enough to do a 4 bed townhouse

• 
  @innercityunit21129 ай бұрын

  @@camdecorations9779 Soon pay for themselves, in saved labour

• 
  @innercityunit21129 ай бұрын

  Great bit of kit...Thanks for the recommendation Colin...These will be a massive time saver on any job. I was impressed by what a clean line you got, right up to the edge of the socket....😎👍

• 
  @camdecorations97799 ай бұрын

  Yeah they are good

• 
  @gileswalker1829 ай бұрын

  Great to see you back Colin! These look great although just saw how much they are and would consider getting 5 of each but will have to use take them off while wet as the last block of flats I did have about 70 sockets/switches in each plot 🙄🙄 maybe mitre mate some conduit saddles to the fronts so you got a nice finger tab on 🤷‍♂️😂 anyway hope to see more from you soon!

• 
  @camdecorations97799 ай бұрын

  You could do that . That's what I done at first then I got sick and tired if moving them around and I ended up buying more packs . In total I have 7 packs of each now . That does a 4 or 5 bed townhouse

• 
  @gileswalker1829 ай бұрын

  @@camdecorations9779 7 packs of each?!!! That’s about £300 😂😂 speculate to accumulate Colin, a true businessman 😁

• 
  @camdecorations97799 ай бұрын

  ​@gileswalker182 that's true , I looked at the time it saves me over the next 10 12 plots and I thought right worth buying . That's how I started spraying from a hand held to a full spray rig

• 
  @davidsmalley87839 ай бұрын

  Thanks for the info Be ordering a batch of these Cheers pal

• 
  @davidsmalley87839 ай бұрын

  Could not just take em of a chuck em in a bucket of soapy water ?