Takes a few minutes to clean. Swap paint for water take tip out of gun lower pressure spray paint back into bucket when you see water spray water back into water bucket. Done

Hi Colin, really like you videos and how honest and down to earth they are mate, just wondered do you notice a big difference in the diaphragm pump over the piston pumps regards overspray? people say there is less overspray with the diaphragms, what do you find. Cheers

@camdecorations9779

3 жыл бұрын

Hello Vince I've seen no difference in the overspray between the diaphragm pump and a piston pump they also say you can spray with less pressure with a diaphragm pump than the piston which is also untrue . I tell you this its a great machine , I'm going to do a review on it soon .

@vincentherbert604

3 жыл бұрын

@@camdecorations9779 Brilliant mate thanks for the reply, we have been trying the HEA tips and find they run with a bit less overspray than the tritec and gracos. We were also looking at the heated hoses but they are 240v only so no good for site.

Can you do a proper review / comparison on this machine please potentially looking to buy one. Is it worth upgrading from a Graco 495

Like the video,am looking at moving up from the ultra ma to a bigger unit,not sure what to go for,while I'm here what do you use pump armour or do you know of a substitute, keep them coming 👍

@camdecorations9779

3 жыл бұрын

if your going for a bigger spray unit get a tritech t5 really good solid all rounder. regarding the pum armour, you can use white spirit , but i havent tried it , but i do know people who have. other company's sell the same thing but under different names and maybe a bit cheaper. its totally upto you which way you go as long as you use something.

@marsdencarl89

3 жыл бұрын

Just use a cheap antifreeze for car engines does exactly the same thing and has same ingredients but a lot cheaper

👍💰

Interesting exercise Colin. So do you like the Wagner ? Way back when I was an apprentice the company I was in had a few Wagner units. All petrol. Talking early 80,s btw. Big contracts we did, warehouses and factories, schools etc. Did you look at the Wooster dust eater ?

@camdecorations9779

3 жыл бұрын

The wooster dust eater I haven't got yet , was waiting for it to come in stock then I totally forgot about it , nice one for reminding me. The wagner is a good machine , I'll do a review on it soon and let you know the pros and cons with it. Then I'll do another video of a comparison to my other 2 spray rigs to see which one I prefer. 👍

Nice machine. Out of interest do you use a fan extractor on your jobs that should be your next video as it be good to see how to setup properly

@camdecorations9779

3 жыл бұрын

I don't use a fan , all the material I use are waterborne

Hi colin do you need to run pump armour through the hose and gun aswell or is it enough to just prime the unit? Thanks again for your useful videos 👍

@camdecorations9779

3 жыл бұрын

Just the unit mate 👍

@micksmith3352

3 жыл бұрын

@@camdecorations9779 thanks colin

@ciogon

Жыл бұрын

@@micksmith3352 or use some white spirit mixed with some engine oil...that would prevent everything from rusting inside...pump armour is expensive and not worth it...

Hi Cam could you tell me what your preference is between this and the T5. I do some AAA spraying and I spray out new builds from fresh Plaster. Thank you

@camdecorations9779

2 жыл бұрын

The sf23 plus all day dint get me wrong the t5 is a great machine but the 23 plus is just so versatile. The hopper is cheap to buy compared to other brands and it's a direct feed . Also for aaa spraying you can go wrong it has a diaphram pump so there's no fluctuations when your spraying, very easy to clean as in only several minutes using cold water and you can service it yourself. Overall a great spray rig .

@AM-sd5sz

2 жыл бұрын

@@camdecorations9779 awesome, thats made my decision alot easier. Not many people that have used both 👍

What sites that Colin, the making good seems minimal the countryside site I’m at the minute need a near in mist coat not just spotting in like that lol

@camdecorations9779

3 жыл бұрын

It's a small builder called storey homes , this house wasn't to bad but some of them I've had to re mistcoat again

nice video mate, Have you tried the Wagner HEA tips yet ?

@camdecorations9779

3 жыл бұрын

No I haven't , anyy good ?

@KinGLeeuk

3 жыл бұрын

@@camdecorations9779 Trying one tomorrow will let you know, supposed to work at 900/1000 PSI if that's true then minimal overspray would be a bonus.

@pjmisley

3 жыл бұрын

They are good I don't think they last as long as high production but it you get it dialed in the amount of oversprsy is amazingly minimal... with 75 ft of hose I usually run at 1350 psi( at the pump)

@joebonthuys

3 жыл бұрын

Banging tips

Hi, how do you price up a job? Thanks Sam

@camdecorations9779

3 жыл бұрын

Work out the square meter for the job then times it buy the square meter you charge . So mistcoats you can charge £2 a square meter . Internal works £13 to 15 a square meter that's without doors , price your doors up accordingly.

@samrix5793

3 жыл бұрын

@@camdecorations9779 that's really useful thank you!

@samrix5793

3 жыл бұрын

Do you try to do mist coat and 2 tops in one day or over 2 days? Thanks Sam

These units are heavy compared piston pump

Colin is that you??? Did you work for A.P.C

@camdecorations9779

3 жыл бұрын

🤣🤣🤣 yes