Пікірлер

• 
  @anthonydeakin33523 күн бұрын

  When i took the cones off my door after the cables snapped. The shaft on the left side came out of the bracket and the only way to get it in seems to be to torsion the spring. Is that correct? Seems sketchy tensioning the spring before i can even get new cones on

• 
  @huggy1765 күн бұрын

  Hi, can you tell me what the battery cell is? I have a Paslode impulse 350/90 CT 2007 model, but I don't know what replacement battery to get. Cheers 👍

• 
  @sugarfury5 күн бұрын

  Best one yet thank you

• 
  @markgish60025 күн бұрын

  If you blade, make shavings after you sharpen it than you know the teeth are sharp.

• 
  @cheflorenzo44916 күн бұрын

  What?

• 
  @allenfritts48477 күн бұрын

  just stop fooling around and do the trick already

• 
  @Peter-ms5ub8 күн бұрын

  If you grease the track the wheels may not turn and rub themselves flat like mine did.

• 
  @dannyodonnell601713 күн бұрын

  Son: Can i go inside now? Dad: If you want to bang your head again, yes Love it! Thats proper dadding just like i remember when working with my dad. Awesome job all round

• 
  @brienfarmer684615 күн бұрын

  i used my silvel router 5 times and the motor went out, will the company send me another one?

• 
  @davidmacdonald440617 күн бұрын

  What if the water doesn't flow through?

• 
  @phyllispeak985518 күн бұрын

  Tried this still not turning on

• 
  @lesleyghostdragon314920 күн бұрын

  Thank you for this helpful video, Sir 🙏 I was a bit distracted, worrying balls might get away from you and disappear into one of the work bench holes. But, maybe you're a daredevil, or maybe there's a fancy catch/ramp system under the bench like a pool table, or maybe that towel is magic... 🤔☺

• 
  @dmgladden20 күн бұрын

  Hi the holes are for bench dogs but yes many things go down but never get lost

• 
  @MartynSmith-wm9fg23 күн бұрын

  Brilliant!! Thanks very much, I've bought you a pint. 😂 I actually paid £40 last year for the same problem, no wonder I thought I had it repaired cheaply. Thanks again.

• 
  @HippyHearse24 күн бұрын

  TY. Told me what I needed to know, I was worried about getting caught in a giant mouse trap because I didn't know about the retaining pin for the spring tension.

• 
  @paulb976926 күн бұрын

  Hi I am only getting tension on the left side the right does not seem to roll up any ideas?

• 
  @ukpeacheater27 күн бұрын

  @dmgladden David, did you ever make a complete strip-down video for this DW988 as you mentioned at 14:20 in this video? I have one, it is not heavily used, only DIY, but today I discovered thast it will not select Hammer Mode - the ring I rotate to set the torque, will not go that last step to the Hammer symbol. Any idea if this is a common fault (and relatively easy to address) fault? Thanks, Pete.

• 
  @pencilme1n28 күн бұрын

  This will sort it in most cases. It can also be a fuse in the plug, a capacitor or a problem with the auto stop function.

• 
  @brettcounsellor53729 күн бұрын

  Yup... you're the man! Worked like a charm, and I was indeed about to go buy a new one. Things are made so cheap nowadays that I figured it just broke 😄

• 
  @dmgladden28 күн бұрын

  A beer will be lovely thank you

• 
  @davidmacdonald440617 күн бұрын

  ​@@dmgladdenfollowed as instructed but the water doesn't flow through the machine to the lance hole

• 
  @dmgladden15 күн бұрын

  @@davidmacdonald4406 is it leaking? Or is the water off as there is nothing to stop the flow

• 
  @davidmacdonald440615 күн бұрын

  @@dmgladden no its not leaking, connect hose and turn it in and water doesn't flow through the machine, does the pump have a safety shut-off? When you switch it on it heats the water that comes back out the inlet pipe when you remove the hose but there's no noise from the motor on switch on.

• 
  @dmgladden14 күн бұрын

  @@davidmacdonald4406 no should be nothing stopping the flow

• 
  @yonix395829 күн бұрын

  THANK YOU SOOOOOO MUCH !

• 
  @rickwatts2642Ай бұрын

  Hi David, do you know if the diamond wheel has diamonds on the tapered side as well as the flat side?

• 
  @andreslootus7687Ай бұрын

  Good job. Thanks for sharing. Next beer is on me..

• 
  @ursbeck1Ай бұрын

  Works - pint delivered- cheers from Switzerland

• 
  @AdamNiddrieАй бұрын

  great video however you should have a stop set in place to limit the forward movement of the top alternate bevel grind for both directions. this will ensure an even grind on all your tips for symmetry.also do not rotate the blade through the grinding action but rather simply press the tip onto the grinding wheel in a straight in and out action , in until you touch your stop and then back out again. it is best to set your stop to your worst tip and then bring every tooth to the same reference indexing point.

• 
  @RobertCrowther-kk3fgАй бұрын

  This works. Every time I leave my machine for a while I have to follow this rigmarole. I would not recommend a Karcher machine to anyone considering buying one - over hyped.

• 
  @marcsahakian1186Ай бұрын

  It works !!! Thank you so mutch !

• 
  @subtalkformerАй бұрын

  This happened to me on job today. I was fuming! I'm gonna take the thing back to Toolstation!

• 
  @Leo-gt1bxАй бұрын

  Hi I am tensioning mine but only the left side is tensioning the right is not spooling any ideas?

• 
  @Leo-gt1bxАй бұрын

  Hi I am tensioning mine but only the left side is tensioning the right is not spooling any ideas?

• 
  @jasoncortes1150Ай бұрын

  Thank you, it worked.

• 
  @yousafali1662Ай бұрын

  Good honest demo. Thanks for passing on the knowledge.

• 
  @JdikmenАй бұрын

  Fixed my K3 Follow Me! Thanks!

• 
  @McMonkeyfulАй бұрын

  Thanks for the informative review. I currently have a Lidl Parkside gluegun which works OK but is semi-cordless (heats up on stand, then holds temperature for a while before you have to return to the stand). I don't use it very often as it is a pain to get onto the stand & heating. I would like to use hot glue more often as it is a useful tool, so I looked at this Stanley Fatmax. The Amazon reviews were mixed with a lot of people reporting faults but I guess most people only bother leaving reviews when they're super impressed or really dissapointed. Your review convinced me to take a punt (at £40). I hope mine works as reliably as yours has :)

• 
  @dmgladdenАй бұрын

  Hi and thanks for the comment. One thing I have learnt since this video is in winter is that if the gun body is to cold it won't heat up at all it just keeps flashing so I just put it near a heater to warm the body, other than that I'm still very happy with it after all this time

• 
  @McMonkeyfulАй бұрын

  @@dmgladden Top tip, thanks. I might keep it in the house during the winter & grab it when needed, as I tend to just leave the workshop cold & go out there in a padded boiler suit to save on the electric :) Mine arrived today & I used to to hold some hinges in place while I attached them, so already proving its worth.

• 
  @joaquinchan9936Ай бұрын

  Are those OX brands? I own like 10 different caulking guns at the moment. Maybe more. Ever since I learned about thrust ratios, you just need a variety of guns for different applications like at least 3.

• 
  @rickwatts2642Ай бұрын

  Is there any places on the internet that give you the blade angles?

• 
  @JustinGlynnАй бұрын

  Legend, managed to get my gun working again

• 
  @josephblack9870Ай бұрын

  What is the swivel air outlet for what way do you turn it

• 
  @Human-being24601Ай бұрын

  Bingo…. I owe you a pint buddy 😊 🍺 🙏 K5 good as new🎉

• 
  @dmgladdenАй бұрын

  Thanks mate there's a link in my comments cheers

• 
  @GuglielmoTell-uh6bfАй бұрын

  If your predicament is that of a frayed cable loop, and your frame is set between brick pilasters that prevent cone replacement without door removal, here is a quick and easy solution that works well: It requires a short length of 2mm cable and 2 x 2mm oval wire clamps (these still clamp old 1.5mm cable effectively). NB Estimate where to cut off the frayed cable loop very carefully - you probably have 130mm or less to accommodate the new arrangement. Cut a short length of new 2mm cable - 250 to 275mm should be sufficient. Form a new loop held by one of the oval clamps - one end of the cable will need to protrude enough for it to be held by the other oval clamp, along with the cut end of the old cable. Note that manufacturers/vendors of wire clamps warn against their being used for lifting operations and typically quote 50-70% of proof load. NB Be sure to check existing cable for serviceability. NB The use of such an arrangement on both sides of the door cannot be endorsed - do so at your own risk. Thanks for an informative post that has attracted some useful comments, especially preventative maintenance using an aerosol light lubricating oil.

• 
  @BazzSelbyАй бұрын

  Excellent! My mate just gave me a K4, because it kept 'cutting out', and he had to keep turning it on and off, for it to work. I've not had the need to use it, yet, and was wondering if it had the same problem? It works, then cuts out, the a quick turn on/off and it works, again.

• 
  @user-zu4cw9gu6lАй бұрын

  How to replace the spring that holds the blade.

• 
  @MatthewTinker-vg3cmАй бұрын

  Thankyou! This worked. Thought yet another pressure washer broken over winter & this resolved it 👍

• 
  @dmgladdenАй бұрын

  It's a good deal a working jet Wash for just the cost of a pint, link below. Thank you and cheers

• 
  @neilbartlett30182 ай бұрын

  Excellent

• 
  @dmgladdenАй бұрын

  Thank you Neil

• 
  @sagtaz2 ай бұрын

  Thanks for the video. Doing a bit of homework ,got one to fix in for a customer tomorrow, you made it look easy

• 
  @sergiot42692 ай бұрын

  It comes with a rounded sanding paper. Can you please me what is it for?

• 
  @mohamed96722 ай бұрын

  Perfect

• 
  @ambarishsengupta43772 ай бұрын

  Hi ..

• 
  @odissey22 ай бұрын

  The key is to do it naked...

• 
  @steverobinson61302 ай бұрын

  Wow.... I have an older K2 model and thought it was trash.... ready to buy a new one. I came across your video and thought I'd give the quick fix a try. It worked like a charm. I can't thank you enough.... any time your in Chapel Hill NC give me a shout and I will definitly buy you a beer!!!!

• 
  @dmgladden2 ай бұрын

  If you really thankful and want to buy me that beer the link is in my comments or just PayPal me what you feel. Cheers and good luck

• 
  @philipcampbell79562 ай бұрын

  What are you drinking mate? Thank you 😊 😘

• 
  @dmgladden2 ай бұрын

  Just to buy me a pint is thanks enough cheers Philip the links below

• 
  @elwoodbluesmorris21202 ай бұрын

  All i could see was the back of your head.