You're not the only one! I'm having the same problem after installing a new head unit on my Toyota. Both units look surprisingly similar with the airbag/hazard light strip below the unit. I'm going to try this tomorrow. So glad I found your video.
@frankiebosagri68632 күн бұрын
Let me know how it goes or any alternative fixes please!
@lisandrolsz2 күн бұрын
@@frankiebosagri6863 so in my case it didn't work. It looks like the plug also carries cables for the hazard light button so I have to connect it to the head unit because it has that button. I tried to use a Y adapter to split the cable but then the car wouldn't start. It's back to the drawing board for me.
@henrybibb899111 күн бұрын
Excellent video. Great preparation and thinking it all through. I think you're braver man than I, or you have a better planer. :)
@charliehopcraft554211 күн бұрын
Really impressive, I made a smaller board similarly from some re-sawn ash firewood. As a result it is full of splits and cracks! Was this one made from pine? I wouldn’t have thought you could use softwoods for a cutting board, will be interesting to see how it wears in! Great video😊
@kaukolaDIY11 күн бұрын
When i bought this wood, label said, that it's Teak. But i'm not sure anymore. Color was right, but when i took it through my thickness planer, this nice teak color was gone. I think it's something else, something very that basic, like Pine. I don't know different woods at all 😁. And btw this is not going to be a cutting board, it's going to be a part of a table, which i'm working on right now.
@charliehopcraft554210 күн бұрын
@@kaukolaDIY very nice!
@joeparker626412 күн бұрын
How do I get the steering wheel function to work anyone help
@kaukolaDIY12 күн бұрын
I don't have any easy solution for that, it should work straight out of the box. Mine didn't work. It took me multiple radio resets and battery disconnects. Suddenly, one morning steering wheel controls just started working. Try to press and hold reset button long enough, like 30sec.
@joeparker626412 күн бұрын
@@kaukolaDIY where about is the reset button sorry for being a pain
@kaukolaDIY12 күн бұрын
@joeparker6264 in my radio, upper left side is three horisontal holes, i think for microphone. Under those, is a small hole, that's the reset button. You need something small, like a pen, to push it. But don't push it too hard.
@kaukolaDIY12 күн бұрын
I hope you radio won't go to "on off"-loop like mine. I almost lost my hope because of that 😁. If reset won't help, it might be also good to try to disconnect the battery for some time.
@joeparker626412 күн бұрын
@@kaukolaDIY hi I have try the battery and the reset and it has not work
@MrSnookerballs17 күн бұрын
Your supposed to remove the grey paint covering the contact area so the pads don't get contaminated with paint when fitting new pads
@SuesWainwright17 күн бұрын
Thanks for sharing it's just so beautiful
@fabiochirizzi26 күн бұрын
There is a 12V from reverse light directly from this big Connector?
@kaukolaDIY26 күн бұрын
Reverse signal to the radio unit comes straight from the CAN box, it's a pink wire. I didn't measure, if it's 12V or something else.
@fabiochirizzi26 күн бұрын
@@kaukolaDIY I'm referring to the 12v that powers the rear camera
@kaukolaDIY26 күн бұрын
Yes, i'm pretty sure, that it's 12V.
@capt.jack.222026 күн бұрын
the place is very beautiful and the view is astonishing.i ilove the weather too..keep it up bro. new subscriber here.
@kaukolaDIY26 күн бұрын
Thanks for the comment 🙂 i hope i can visit more locations this summer. Unfortunately it's been raining crazy much this year here in Switzerland.
@Baqu8427 күн бұрын
Thanks man 🤟 I change them yearly
@virusek99929 күн бұрын
Hello. It is possiible to change "auto dor lock/unlock" and other funkcion like in original radio?
@kaukolaDIY28 күн бұрын
In "car lock set" You can set "Auto locking" when you start to drive, doors will lock after you reach a certain speed, or will all locks stay open. You can also set, if doors, and which doors (driver only or all) will open, when you pull the key out.
@rennie66Ай бұрын
How is that hole holding up? I'm planning on doing the same thing running the 25mm cable through there
@kaukolaDIYАй бұрын
I think it is possible to run 25mm2 cable through. Might be, that you have to cut more of this "nipple" away, make a bigger hole. This rubber doesn't stretch very much, it will be tight fit.
@rennie66Ай бұрын
@@kaukolaDIY for you it worked out in the video. I could just drill the hole out as much till it fits
@kaukolaDIYАй бұрын
@@rennie66 yes, sorry, i first remembered, that i used 20mm2 cable, but i also used 25mm2. it will work, it is a tight fit. More work is to get there 😊.
@kaukolaDIYАй бұрын
Acually now i remembered, that the hardest part was to get my hand there with a tool, that i could cut this rubber „nipple away.
@rennie66Ай бұрын
@@kaukolaDIY I don't even know if mine is 20 or 25mm2. It's 4 awg, ordered it from the usa from NVX. Positive thing with the tightness is that there will never run water in it😀
@1nkmanАй бұрын
I have the same models as you and agree on all points. I wish Garmin would come out with a 4k version. Good job on the comparison thank you.
@phillwildmanАй бұрын
It's looking great so far. 😎
@kaukolaDIYАй бұрын
CityDriver works.. i don't know what happened, it just started to work with the steering wheel and pedals.
@CarlosDaniel-nu4vuАй бұрын
Im having an issue that i cant figure it out how to solve, sometimes the device it self wont turn on automatically.... I need to take the fuse out, plug it again and problem solve, it starts again, sometimes its enough to do it once during the day and will work well till the next day .. somebody knows what it could be? Thank you
@sapereaude391Ай бұрын
When you said you were going to change the tyres, I thought you were going to change the tyres. Surely, the recommended tyre pressure should be measured when there is two tonnes of car contributing to the pressure.
@billriddick1020Ай бұрын
Did you really fill the tyres with air according to the specifications for the vehicle before they were mounted on your car?
@kaukolaDIYАй бұрын
Jep. I always measure the pressure, when tyres are "cold". After installation, test drive to a shopping mall to buy some dinner, and in the morning, another pressure check. Like i said, i don't know how accurate this Einhell machine is, but In the morning, i had to add little bit more air to get it to specs. I don't drive that much, but i check tyre pressures about once in a month. My car is 2011, so it doesn't have sensors in the tyres.
@res5ektАй бұрын
same rims, same astra (mine is hatch). i used to apply fusso coat as protection and meg tyre gel on wheels. its easier to clean them in next year. but somehow as fusso is PTFE/teflon (or maybe no because of that) but mainly on car it collected more grind then without it. so i switched to ceramic or lite ceramic from meg. i am wondering how long it will hold on rims (i do complete decontamination, apc, sour schampoo, iron, tar remover). tyre gel on wheels holds up to 2000km for me, but next time i will try carpro darkside if it is at least as good as tyre gel from meg. i have 16" Continental for winter and 17" Falken for summer and somehow i like the summer wheels more :D but i go to replace them to service cause they have all equipement especially that one which spins the wheel and then he knows where to put or remove those iron cube stickers for best wheel "spinning". it cost 25eur "only" here 🇸🇰 (was the time 5-years ago when the price was 15 only) so.... why not :D nice video btw. mine tip is: change the stock open nuts (which shows corosion of wheel screw) for closed one (chrome platted, plastic nuts caps looks awfull) which pair with those rims color perfectly and wheels then looks more "clean". price was 22€ all nuts back then 5years ago, now are little bit more pricely (1.5€ each nut). good luck!
@randothecomandoАй бұрын
I can’t decide on which one to get. I wish I could get the 57 spec’s in the mini size. I like how small the mini is.
@kaukolaDIYАй бұрын
If you need GPS data and if you want to use videos for example in social media, i think 57 is a better choice. Both of course works ok as a dashcams, 57 is little bit better with details and low light situations.
@randothecomandoАй бұрын
Thank you! Do you ever worry about someone breaking in to steal it?
@kaukolaDIYАй бұрын
@@randothecomando i actually never thought about that.. but i think that's possible.. i don't know, if dashcam is really something that someone wants to steal. In my case you can't get the cable out easily without breaking it. Camera it self is quite easy to remove and put back, because of the magnet and only one cable, but i'm not going to do it everytime, no way.
@fikretozelerАй бұрын
👍
Ай бұрын
Anyone happen to have a firmware for Hiworld Opel Astra J ? I don't have an option to select any Opel cars...
@CarlosDaniel-nu4vuАй бұрын
168, 2009-2015, gen 4
@kaukolaDIYАй бұрын
@CarlosDaniel-nu4vu i have now "Hiworld Buick 168". I'm afraid to try something else :-). Everything, what i need, works. Apple Carplay and rear view camera. Radio doesn't work, reception is very bad, but i don't listen radio anyway. One thing which doesn't work, i can't get any data to the screen from the CAN box, no speed data, no fuel consumption and so on. Outside temperature works.
@phillwildmanАй бұрын
The table is looking very interesting already. 😎
@kuteshgandhi60362 ай бұрын
Very useful video, can I pls ask where do you ground the black camera cable behind the stereo end? Is it required, I have the camera working without connecting ground ? Thanks
@kaukolaDIY2 ай бұрын
It needs only one ground, which is connected in the rear, near to the camera (black and red cables). I don't know how your camera can work without this ground cable connected. Does it maybe get a ground from the RCA?
@kuteshgandhi60362 ай бұрын
@@kaukolaDIY thanks, I think in that case the ground must be connected at the camera end, I have swapped the stereo and had a loose ground left, but this new style stereo also had a combined ground with yellow camera cable behind the stereo.
@litteulponny2 ай бұрын
nice project. can't wait for next episode !
@rodis50242 ай бұрын
hello, thank you for this video... i have a little problem with the speakerphone for calls, when some one call me the call is not very good, they are cuts..and the sound of music is not so good. thank you for your help
@WrestlingMedia2 ай бұрын
Just installed this… but can’t find the CarPlay app to connect… any help? Thanks
@kaukolaDIY2 ай бұрын
Main screen is "setting" and there "general", "PhoneLink", "phone link application".. here you can choose carPlay or Android auto.. I don't know, if that will help.
@WrestlingMedia2 ай бұрын
@@kaukolaDIY thank you for the fast response. Will let you know how I get on thank you
@reckle5s3702 ай бұрын
Fairly clean filter, i had the same, just cleaned the housing and left the old one in, thanks.
@jukkaaman99782 ай бұрын
How about astra k 2016 rear camera? Any ideas how to install that? Do it need to pair with computer?
@larsk77082 ай бұрын
Audio out rear and front right left did you get sound all speaker ans subwoofer amp working? I have that to but also and sub out cable :)
@kennyhousehold5782 ай бұрын
No you're not the only one with this problem. I too have the same problem... I took a look at the original head-unit and saw the unused connector spare in my car was in fact the male which went with the female behind the panel that has airbag light on it. I managed to pop the unit with airbag lights, hazard light button and door lock/unlock button on it. Then my friend found this video whilst searching KZread for me. I am going to try and do what you have done tomorrow. Wish me luck
@toolman953 ай бұрын
Why are you overtightening, when the torque wrench Clicks That It!! STOP No further. Your like a Kwik Fit Fitter lol
@Lawrence-Joseph-Norse3 ай бұрын
Only Jesus Christ can save you from hell.
@akinkorkmaz12693 ай бұрын
Can you send me the link for antenna amplifier. I also just bought the same Android radio and am in the process of building it. I'm also having problems with radio reception. Thanks
@kaukolaDIY3 ай бұрын
I bought mine from Amazon.de. amzn.eu/d/7nHined But.. i have to say, radio reception is still quite bad, i just don't use radio. There might be also some "better" versions of these adapters, but is it getting any better, I don't know.
@DrivenByGeorgeJexter3 ай бұрын
Thanks!!!
@patrickrabensteiner23853 ай бұрын
Wie bekommt man eigentlich den Tacho am Hauptbildschirm zum laufen?
@kaukolaDIY3 ай бұрын
Vielleicht kann ich eine App aus dem Google Play Store herunterladen? GPS-Tachometer oder etwas für Android.
@patrickrabensteiner23853 ай бұрын
Eventuell mit einem opd Stecker?
@MarcelinhoRuhrpott3 ай бұрын
Hab die Kamera jetzt auch nach da oben gepackt. Unten als Laie keine Chance gehabt. 🙈
@cornelhansen-juhas19713 ай бұрын
👍😎
@kaukolaDIY3 ай бұрын
This year in 2024 168000 visitors, last time in 2019 was more than 600000 visitors.. quite a big difference.
@Not_Kenta3 ай бұрын
Nostalgia
@technics-n-thuiast83464 ай бұрын
I have ben to GIMS few times in past 10 years and looking back at all the previous shows and the one of 2024, It is almost that this years was paying a homage to the previous ones, reminiscing on the all great cars that once were presented there and basically saying farewell to what show use to be with all these special editions ( The Kimera 038 ), resto-mods ( Totem Automobili Alfa Romeo ) and new/next generation legends ( new Renault 5 ). It is also hinting at what to expect from next shows ( more Chinese cars ).
@kaukolaDIY4 ай бұрын
Previous years there was many big brands from Japan and europe, now none of those were there. Before there was also the whole own hall for tyre, maintenance and tool companies.. not anymore. Times are changing. I'm curious to see how it will be next year, or is it again only in Qatar.
@edubravo19524 ай бұрын
Hi I got a similar screen, but my android auto doenst use the full screen, do you know if there is a fix? Also, is it possible to make the radio to not to startup first? and last, when reversing my car shows a icon of a car with sensors, but my car doesnt have sensors, do you know how to remove that? Thank you very much!
@kaukolaDIY4 ай бұрын
That Android Auto problem is strange, i have only Apple Car play, which works fine, so i have no solution for your Android problem. In my version, radio will start first only, if i will do a full reset, but when i use Apple Car play, next time it will start in main menu, not in radio or Apple Carplay, i have to start Carplay everytime again. In factory settings is many settings, for example there i found a solution for my heating screen, which popped up randomly all the time. In the factory settings, i could switch that off. Might be, that you could find a switch for your sensor problem there.
@edubravo19524 ай бұрын
@@kaukolaDIY thanks for the help
@patrickrabensteiner23854 ай бұрын
Was passiert eigentlich mit der ECO Taste? Danke schon mal für die Antwort ;)
I really like this project. I have been planning to build it for a while now. I cannot believe this video does not have more views and/or likes. Thanks!
@SuperValentin324 ай бұрын
приятно смотреть как работает специалист
@oscarstout98904 ай бұрын
What happens with the lane assist button
@kaukolaDIY4 ай бұрын
That's a good question. In this radio version what i have, is no support for lane departure warning button. I don't have this feature in my car. I tried to look online, but I couldn't find any "tesla-style" radio for Astra J, which support this button.
@J90JAM4 ай бұрын
Damn, had me worried there for a second as I'm looking to buy one of these units. Everything works then?
@kaukolaDIY4 ай бұрын
Now it works fine. FM radio is bad, I don't know why, even if i installed an antenna amplifier. Luckily I don't listen radio, so I haven't figured out, what's the problem. I love wireless Apple Carplay function. Some CAN functions doesn't work. Steering wheel controls works, but information, like fuel consumption and other car info won't show anything. Unit is fast to use and it looks great. touch screen is good, but will scratch easily, sadly i didn't add protective layer, when it was new. I wish to have more audio settings, like level adjustment for subwoofer output, and better crossovers. But it's not a bad machine.
@than.59894 ай бұрын
Great Video! I have exact same problem
@tilly01915 ай бұрын
Sorry for your loss fella, it's never easy losing a loved one, nevermind your parent. Sending love from the uk, look forward to more videos. You've come along way from when you 1st started 👌💙
@kaukolaDIY5 ай бұрын
Thanks 😊
@Redfleminem5 ай бұрын
What size is the adapter on the piston rewind tool? Would I use a 22mm or 32mm adapter plate?
@kaukolaDIY5 ай бұрын
I didn't measure that plate. I bought a set with many different sizes, i used this set only for my car, and only one of those plates looks used, and this one is 33mm (nipple middle to another nipple middle).
Пікірлер
You're not the only one! I'm having the same problem after installing a new head unit on my Toyota. Both units look surprisingly similar with the airbag/hazard light strip below the unit. I'm going to try this tomorrow. So glad I found your video.
Let me know how it goes or any alternative fixes please!
@@frankiebosagri6863 so in my case it didn't work. It looks like the plug also carries cables for the hazard light button so I have to connect it to the head unit because it has that button. I tried to use a Y adapter to split the cable but then the car wouldn't start. It's back to the drawing board for me.
Excellent video. Great preparation and thinking it all through. I think you're braver man than I, or you have a better planer. :)
Really impressive, I made a smaller board similarly from some re-sawn ash firewood. As a result it is full of splits and cracks! Was this one made from pine? I wouldn’t have thought you could use softwoods for a cutting board, will be interesting to see how it wears in! Great video😊
When i bought this wood, label said, that it's Teak. But i'm not sure anymore. Color was right, but when i took it through my thickness planer, this nice teak color was gone. I think it's something else, something very that basic, like Pine. I don't know different woods at all 😁. And btw this is not going to be a cutting board, it's going to be a part of a table, which i'm working on right now.
@@kaukolaDIY very nice!
How do I get the steering wheel function to work anyone help
I don't have any easy solution for that, it should work straight out of the box. Mine didn't work. It took me multiple radio resets and battery disconnects. Suddenly, one morning steering wheel controls just started working. Try to press and hold reset button long enough, like 30sec.
@@kaukolaDIY where about is the reset button sorry for being a pain
@joeparker6264 in my radio, upper left side is three horisontal holes, i think for microphone. Under those, is a small hole, that's the reset button. You need something small, like a pen, to push it. But don't push it too hard.
I hope you radio won't go to "on off"-loop like mine. I almost lost my hope because of that 😁. If reset won't help, it might be also good to try to disconnect the battery for some time.
@@kaukolaDIY hi I have try the battery and the reset and it has not work
Your supposed to remove the grey paint covering the contact area so the pads don't get contaminated with paint when fitting new pads
Thanks for sharing it's just so beautiful
There is a 12V from reverse light directly from this big Connector?
Reverse signal to the radio unit comes straight from the CAN box, it's a pink wire. I didn't measure, if it's 12V or something else.
@@kaukolaDIY I'm referring to the 12v that powers the rear camera
Yes, i'm pretty sure, that it's 12V.
the place is very beautiful and the view is astonishing.i ilove the weather too..keep it up bro. new subscriber here.
Thanks for the comment 🙂 i hope i can visit more locations this summer. Unfortunately it's been raining crazy much this year here in Switzerland.
Thanks man 🤟 I change them yearly
Hello. It is possiible to change "auto dor lock/unlock" and other funkcion like in original radio?
In "car lock set" You can set "Auto locking" when you start to drive, doors will lock after you reach a certain speed, or will all locks stay open. You can also set, if doors, and which doors (driver only or all) will open, when you pull the key out.
How is that hole holding up? I'm planning on doing the same thing running the 25mm cable through there
I think it is possible to run 25mm2 cable through. Might be, that you have to cut more of this "nipple" away, make a bigger hole. This rubber doesn't stretch very much, it will be tight fit.
@@kaukolaDIY for you it worked out in the video. I could just drill the hole out as much till it fits
@@rennie66 yes, sorry, i first remembered, that i used 20mm2 cable, but i also used 25mm2. it will work, it is a tight fit. More work is to get there 😊.
Acually now i remembered, that the hardest part was to get my hand there with a tool, that i could cut this rubber „nipple away.
@@kaukolaDIY I don't even know if mine is 20 or 25mm2. It's 4 awg, ordered it from the usa from NVX. Positive thing with the tightness is that there will never run water in it😀
I have the same models as you and agree on all points. I wish Garmin would come out with a 4k version. Good job on the comparison thank you.
It's looking great so far. 😎
CityDriver works.. i don't know what happened, it just started to work with the steering wheel and pedals.
Im having an issue that i cant figure it out how to solve, sometimes the device it self wont turn on automatically.... I need to take the fuse out, plug it again and problem solve, it starts again, sometimes its enough to do it once during the day and will work well till the next day .. somebody knows what it could be? Thank you
When you said you were going to change the tyres, I thought you were going to change the tyres. Surely, the recommended tyre pressure should be measured when there is two tonnes of car contributing to the pressure.
Did you really fill the tyres with air according to the specifications for the vehicle before they were mounted on your car?
Jep. I always measure the pressure, when tyres are "cold". After installation, test drive to a shopping mall to buy some dinner, and in the morning, another pressure check. Like i said, i don't know how accurate this Einhell machine is, but In the morning, i had to add little bit more air to get it to specs. I don't drive that much, but i check tyre pressures about once in a month. My car is 2011, so it doesn't have sensors in the tyres.
same rims, same astra (mine is hatch). i used to apply fusso coat as protection and meg tyre gel on wheels. its easier to clean them in next year. but somehow as fusso is PTFE/teflon (or maybe no because of that) but mainly on car it collected more grind then without it. so i switched to ceramic or lite ceramic from meg. i am wondering how long it will hold on rims (i do complete decontamination, apc, sour schampoo, iron, tar remover). tyre gel on wheels holds up to 2000km for me, but next time i will try carpro darkside if it is at least as good as tyre gel from meg. i have 16" Continental for winter and 17" Falken for summer and somehow i like the summer wheels more :D but i go to replace them to service cause they have all equipement especially that one which spins the wheel and then he knows where to put or remove those iron cube stickers for best wheel "spinning". it cost 25eur "only" here 🇸🇰 (was the time 5-years ago when the price was 15 only) so.... why not :D nice video btw. mine tip is: change the stock open nuts (which shows corosion of wheel screw) for closed one (chrome platted, plastic nuts caps looks awfull) which pair with those rims color perfectly and wheels then looks more "clean". price was 22€ all nuts back then 5years ago, now are little bit more pricely (1.5€ each nut). good luck!
I can’t decide on which one to get. I wish I could get the 57 spec’s in the mini size. I like how small the mini is.
If you need GPS data and if you want to use videos for example in social media, i think 57 is a better choice. Both of course works ok as a dashcams, 57 is little bit better with details and low light situations.
Thank you! Do you ever worry about someone breaking in to steal it?
@@randothecomando i actually never thought about that.. but i think that's possible.. i don't know, if dashcam is really something that someone wants to steal. In my case you can't get the cable out easily without breaking it. Camera it self is quite easy to remove and put back, because of the magnet and only one cable, but i'm not going to do it everytime, no way.
👍
Anyone happen to have a firmware for Hiworld Opel Astra J ? I don't have an option to select any Opel cars...
168, 2009-2015, gen 4
@CarlosDaniel-nu4vu i have now "Hiworld Buick 168". I'm afraid to try something else :-). Everything, what i need, works. Apple Carplay and rear view camera. Radio doesn't work, reception is very bad, but i don't listen radio anyway. One thing which doesn't work, i can't get any data to the screen from the CAN box, no speed data, no fuel consumption and so on. Outside temperature works.
The table is looking very interesting already. 😎
Very useful video, can I pls ask where do you ground the black camera cable behind the stereo end? Is it required, I have the camera working without connecting ground ? Thanks
It needs only one ground, which is connected in the rear, near to the camera (black and red cables). I don't know how your camera can work without this ground cable connected. Does it maybe get a ground from the RCA?
@@kaukolaDIY thanks, I think in that case the ground must be connected at the camera end, I have swapped the stereo and had a loose ground left, but this new style stereo also had a combined ground with yellow camera cable behind the stereo.
nice project. can't wait for next episode !
hello, thank you for this video... i have a little problem with the speakerphone for calls, when some one call me the call is not very good, they are cuts..and the sound of music is not so good. thank you for your help
Just installed this… but can’t find the CarPlay app to connect… any help? Thanks
Main screen is "setting" and there "general", "PhoneLink", "phone link application".. here you can choose carPlay or Android auto.. I don't know, if that will help.
@@kaukolaDIY thank you for the fast response. Will let you know how I get on thank you
Fairly clean filter, i had the same, just cleaned the housing and left the old one in, thanks.
How about astra k 2016 rear camera? Any ideas how to install that? Do it need to pair with computer?
Audio out rear and front right left did you get sound all speaker ans subwoofer amp working? I have that to but also and sub out cable :)
No you're not the only one with this problem. I too have the same problem... I took a look at the original head-unit and saw the unused connector spare in my car was in fact the male which went with the female behind the panel that has airbag light on it. I managed to pop the unit with airbag lights, hazard light button and door lock/unlock button on it. Then my friend found this video whilst searching KZread for me. I am going to try and do what you have done tomorrow. Wish me luck
Why are you overtightening, when the torque wrench Clicks That It!! STOP No further. Your like a Kwik Fit Fitter lol
Only Jesus Christ can save you from hell.
Can you send me the link for antenna amplifier. I also just bought the same Android radio and am in the process of building it. I'm also having problems with radio reception. Thanks
I bought mine from Amazon.de. amzn.eu/d/7nHined But.. i have to say, radio reception is still quite bad, i just don't use radio. There might be also some "better" versions of these adapters, but is it getting any better, I don't know.
Thanks!!!
Wie bekommt man eigentlich den Tacho am Hauptbildschirm zum laufen?
Vielleicht kann ich eine App aus dem Google Play Store herunterladen? GPS-Tachometer oder etwas für Android.
Eventuell mit einem opd Stecker?
Hab die Kamera jetzt auch nach da oben gepackt. Unten als Laie keine Chance gehabt. 🙈
👍😎
This year in 2024 168000 visitors, last time in 2019 was more than 600000 visitors.. quite a big difference.
Nostalgia
I have ben to GIMS few times in past 10 years and looking back at all the previous shows and the one of 2024, It is almost that this years was paying a homage to the previous ones, reminiscing on the all great cars that once were presented there and basically saying farewell to what show use to be with all these special editions ( The Kimera 038 ), resto-mods ( Totem Automobili Alfa Romeo ) and new/next generation legends ( new Renault 5 ). It is also hinting at what to expect from next shows ( more Chinese cars ).
Previous years there was many big brands from Japan and europe, now none of those were there. Before there was also the whole own hall for tyre, maintenance and tool companies.. not anymore. Times are changing. I'm curious to see how it will be next year, or is it again only in Qatar.
Hi I got a similar screen, but my android auto doenst use the full screen, do you know if there is a fix? Also, is it possible to make the radio to not to startup first? and last, when reversing my car shows a icon of a car with sensors, but my car doesnt have sensors, do you know how to remove that? Thank you very much!
That Android Auto problem is strange, i have only Apple Car play, which works fine, so i have no solution for your Android problem. In my version, radio will start first only, if i will do a full reset, but when i use Apple Car play, next time it will start in main menu, not in radio or Apple Carplay, i have to start Carplay everytime again. In factory settings is many settings, for example there i found a solution for my heating screen, which popped up randomly all the time. In the factory settings, i could switch that off. Might be, that you could find a switch for your sensor problem there.
@@kaukolaDIY thanks for the help
Was passiert eigentlich mit der ECO Taste? Danke schon mal für die Antwort ;)
Carbon fibre body. 3L, V6. Twin-turbo. 265kw/360bhp. 539Nm/4250rpm. 4x4. 6-speed sequential.
I really like this project. I have been planning to build it for a while now. I cannot believe this video does not have more views and/or likes. Thanks!
приятно смотреть как работает специалист
What happens with the lane assist button
That's a good question. In this radio version what i have, is no support for lane departure warning button. I don't have this feature in my car. I tried to look online, but I couldn't find any "tesla-style" radio for Astra J, which support this button.
Damn, had me worried there for a second as I'm looking to buy one of these units. Everything works then?
Now it works fine. FM radio is bad, I don't know why, even if i installed an antenna amplifier. Luckily I don't listen radio, so I haven't figured out, what's the problem. I love wireless Apple Carplay function. Some CAN functions doesn't work. Steering wheel controls works, but information, like fuel consumption and other car info won't show anything. Unit is fast to use and it looks great. touch screen is good, but will scratch easily, sadly i didn't add protective layer, when it was new. I wish to have more audio settings, like level adjustment for subwoofer output, and better crossovers. But it's not a bad machine.
Great Video! I have exact same problem
Sorry for your loss fella, it's never easy losing a loved one, nevermind your parent. Sending love from the uk, look forward to more videos. You've come along way from when you 1st started 👌💙
Thanks 😊
What size is the adapter on the piston rewind tool? Would I use a 22mm or 32mm adapter plate?
I didn't measure that plate. I bought a set with many different sizes, i used this set only for my car, and only one of those plates looks used, and this one is 33mm (nipple middle to another nipple middle).