Please not that: Mode numbers can be different for our Traffic Controller board version. We always add more features to our boards.
Thank you for watching our product. You can find our products on amazon and ebay. See below links for this product and others.
Please subscribe our channel
Please subscribe our channel.
Web Site: www.ioTMug.com
eBay: www.ebay.com/str/IOTelectronic
Amazon: www.amazon.com/shops/IotMug
Etsy: www.etsy.com/shop/iotelectronic
Пікірлер
Rabbit Labs also has Modules for the Flipper Zero.
I have a question: can I connect two cards together?
@@syhix yes you can use Rx and Rx on Arduino to control multiple.
@@IOTmug nice thx 🙂
excellent system, does it work on 230V AC for France?
yes it works
@@IOTmug 👏
I ordered one 😊
Hey I have a side question here: Just received the Double Dazzler and though I already had the 14hz knowledge, I haven't went 'outdoors' with it to check out the effective range, but upon opening the package (from your Amazon Store) it appears a single, loose, larger 4 prong LED/diode was included. I'm curious about the intention of sending this additional large bulb LED with the Dazzler. Do you have a quick answer or a link to possibly let me know if there is any alternative feature and if so, how/where to attach to the Flipper 0? Thanks
Ahh.. I think I've just realized it's one of the LED's that belongs to the new Turbo Dazzler *THAT I JUST NOW FOUND OUT ABOUT DANG IT* 😂😂 I wish I had looked into all of your future planned projects further since the Turbo is only $10 more than the Double DD Dazzler and looks much meaner with the external power pack.. 🤔 Have a feeling I'm going to end up with far more IR boards/modules than I need since you guys seem to be doing an R&D speedrun with the haste of production between prototyping and putting new stuff on the market! Lol, I'm simultaneously intrigued and yet also bothered that the 'Turbo' is being produced right after I waited for the DD Dazzler 😉
No. Completely different gift for your other Arduino projects, It is now related to Flipper Zero.
Please contact with me if you need more help. We can talk on the phone too. please see www.iotmug.com for email address. We can help faster.
@@IOTmug oh nice! This sounds fun lol, mystery gift time! I'll definitely get in touch this week. Thanks for clarifying things friendo!
Always here to help. Love my customers.
Hello, it is work ac motor. I want to control the speed of the BDTX 100 60W 240m3/h Monofaze. If you have knowledge on this subject, can you write?
I do not know BDTX, as long as it works with regular dimmer devices, it can work with this pwm dimmer. Some devices can be different manufacturer does not want to use dimmer.
I've got the exact same controller and I couldn't agree with you more it works great, I'm not sure if yours is Bluetooth or not but mine is, and I couldn't get it hooked up, at first but like you said the customer service is spectacular! I love mine, I even bought a new one from the same company. Because of how they helped me with the first one and made sure I understood the whole process.
Hi @troyhester7980 I love my customers. Without you guys I can not make better products. Would you like to share your project like this video with us. I will be so happy to share it with other customers. Please contact with me again with [email protected]
Great looking traffic light setup and cross walk, I love looking at different styles and sizes of traffic light and how they get it to work with different types of controllers, but most of them are 3 channels and they are some that have 6 channel controller but they are preset and don't have to worry about programming it, I have been thinking about getting a controller exactly like this one but I am not around a computer and I'm not really good at doing anything on computers and it work correctly, but I will say that you have done a good job with your display and the whole setup.
hi @troyhester7980 Video has been sent to me by my customer. Product is ours on www.iotmug.com . If you do not know programming we have another controller you can expand it from 4 ch to 32 ch... by making mesh network.
@@IOTmug yes sir I believe you are the one that walked me through the 4 channel Bluetooth controller I bought from you about 6 months ago, and I wasn't able to get my phone to hooked up to the controller and you or someone else from your company called me and walked me through the process step by step and then made sure it was working correctly and l am not real quick on typing, but whoever helped me was patient and gave me detailed instructions to help me understand the traffic light controller, so if you are wanting to get a controller for your traffic light, crossing (walk & don't walk) light, look no further, and buy it from here, so many different controllers to choose from and the customer service is the best I've ever had to deal with, definitely recommend this company /seller........... I have 2 styles from them now and I have not had any issues with the controller. Great place to get your traffic light working like the ones on the highway.
@@IOTmugwhere do you get these traffic lights from
code please
See link and code www.iotmug.com/pwm-ac-light-dimmer-module-110-220v-for-arduino-raspberry-pi-5060hz-fan-motor
Can you demo the AC Dimmer on A Raspberry Pi? Python code is different.
Fee shipping to USA www.iotmug.com/pwm-ac-light-dimmer-module-50hz-60hz-arduino-raspberry-led-smart-home
Hi. Can you run this on a Raspberry Pi?
kzread.info/dash/bejne/d4SbmNeQZanKfKg.html
@@IOTmug I notice the AC dimmer here and the one on this video is different. Will they work the same?
possible to dimm the lights with the controller or app ?
why do not you try this. Arduino : www.iotmug.com/8-channel-ac-programmable-light-dimmer-module-controller-board-arduino-raspberry-compatible-5060hz-2
can you dimm the lights ?
Sorry none of h traffic light controllers we have that option. I was planning o do something like this.
What is this module called?
Dazzler. it is IR Blaster www.iotmug.com
Thank you! This just sold me on buying one!
Thank you
Good video
Thanks
Where can I get these?
hello here is the ink www.iotmug.com/relays please let me knw if you have other questions
@@IOTmug this seems to be a US site. Are they available in the UK?
@@robertsquires2816 sorry, only from USA
my sign has two sets of red blue and white wires what is the config you used for wiring ?
Please check its manual. you should see lines and neutral . you do not need ground for this controller.
@@IOTmug unfortunately it's practically impossible to get the manuals for these devices but I figured it out blue and blue red and red white and white can you flash the hand at the first of the cycle program the counter for the next cycle
Happy to hear@@unmanaged
I am having flickering issues, both with an LED lamp and a regular 100w light bulb. Any suggestions? I did notice that when i upload a new sketch the flickering will stop and the lamps are dimmed properly, but as soon as the Arduino UNO is done initializing the flickering starts again.
Hello Please see this video too kzread.info/dash/bejne/hn9-zLiho6bakaQ.html . Basically you need to have dimmable Bulb also you need to change variables depends on your hardware enviroment.
Hello, I will ask a very technical question. I know that 300-350 ohm values should be read between exc + and exc - of the load cells one by one, but when you connect these load cells in the juntion box, these ohm values Do I need to read between 300 and 350 ohms again?
Cok certefilli bir soru oldu bi Ibrahim bey bilemiyorum
Hello, I have a very technical question. I know that the load distribution between exc+ and exc- should be around 300-350 ohms. But when I connect 3 load cells in the collection box, do I need to read this ohm information between 300 and 350 (exc+ and exc-) from these load cells?
Cok certefilli bir soru oldu bi Ibrahim bey bilemiyorum
Hello, I will ask a very technical question. I know that 300-350 ohm values should be read between exc + and exc - of the load cells one by one, but when you connect these load cells in the collection box, these ohm values Do I need to read between 300 and 350 ohms again?
Cok certefilli bir soru oldu bi Ibrahim bey bilemiyorum
Thanks for Video answered my question!! Very much appreciated. Have ordered 2 of the controllers now
Glad I could help!
what is the input voltage
Hi in the video input volt is 120V AC. Product supports up to 240V
Awesome 👍👍👍
Thanks for the visit
🚦
Thank you for the Comment :)
The possibilities are pretty much endless with that controller! Nicely done!
Hi @MyTrafficLights , yes it is arduino based. Take a sip and design it. you can control even your garden pumps with this.
Can you make a video demonstrating the same thing using a raspberry pi using C (and not python) please ?
Hi There. Unfortunately I do not know C.
Hello, do you have a traffic light controlled board that will power LED's by running on batteries?
I believe you need this. This boards works on DC volt. But it is not remote www.iotmug.com/dc-input-traffic-light-controller-relays-control-ac100-240v-5060hz-dc-0-100v
@IOTmug I mean the 3 volt LED's to make a 1/14 traffic light set
Sorry we do not have at the moment. But it is in our project list
Very neat. Never thought there would be a arduino based controller for traffic lights. Thank you.
Thank you please check our store more products.
GOOD I NEED CODE FOR THIS FOR ARDUNO
unsigned int i; void setup() { pinMode(3, OUTPUT); } void loop() { for(i=240;i>20;i--) { analogWrite(3,i); delay(20); } delay(1000); for(i=20;i<240;i++) { analogWrite(3,i); delay(20); } }
@@IOTmug thanks you but need connection diagram
Pls check product links and galleries
Merhaba bu ürünü nerden bulabilirim acaba Ve bu ürün 220v 250 watt gücünde bir silikon ısıtıcıyı Arduino uno dan pwm ile çalışan bir pid kontrolcü ile çalıştırmak için ne kadar uygun ekstra bir soğutucu bir aparat vs. gerekir mi ?
Merhaba www.iotmug.com/pwm-ac-light-dimmer-module-110-220v-for-arduino-raspberry-pi-5060hz-fan-motor Burdan alabilirisniz. Bu urunler 2-4 Amperi kaldirabiliyor. Ama 16Ampere ihtiyaciniz varsa web sayfasina bakin. Onun sogutucusu da uzerinde. Cok daha kaliteli bir urun 16A olani.
What type of board is that? (On the left)
Please see here www.iotmug.com/pwm-ac-light-dimmer-module-110-220v-for-arduino-raspberry-pi-5060hz-fan-motor
podrias compartir el squematico
Lo siento, no lo hacemos.
I need project files please
github.com/krida0electronics/16-Channel-WEB-Relay
Will this work on an AC LED lamp?
It works AC LED dimmable bulbs
Dimmable AC LED lamps work better with a trailing edge (i.e. mosfet) dimmer. E.g. Finder 15.11.x etc
Can the lighting be dimmed?
Sorry no dimming option yet
Y’all about to get big fasho 😂
Thank you!!
Nifty.. don't have a traffic light, kinda want one anyway
You can use for other sequencing projects
I added a IR remote control to mine. it has a bunch of blink patterns
Hi Donnie, That is awesome. Is there anyway you can have a video. So we can see how you did!
Awesome, do you have a video on how you connected to a light?
Thank you for asking see this link please we did video already kzread.info/dash/bejne/h6SYlaSSmNfZfLw.html
looks like a proper quality kit
yes it is
hello i need to talk with you thanks
Sure
@@IOTmug tell me you build traffic lights control for me
Could you make one with 4 channels? I have a set of 4 crosswalk signals. Thank you for your time.
We have six channel . you can use as for 4 channel. But you need to know ARDUINO. Please watch this video before you consider buying. kzread.info/dash/bejne/foWGlbWrcrLJm9I.html Remember ARDUINO
We have 6 channel arduino based controller.please check our vidoes. You can use it as 4 channel.
We will have soon 4channel Please subscribe us
I like the ability to really dial in a specific sequence. I might have to grab one and write a blog post about it.
Please check your email. thanks for comment
Hi i need 8 like this.
please check our store on description area.
it can take how long ?
What do you mean?
I bought this. There are no cables or connectors or even options/ideas of what potential accessories to use for this. I expected a plug or remote
Hi Bianca. Applied applications are differs from customer to customer , purpose to purpose. It depends also environment. We supply as in our listing basic . So we we will not waste anything ,we will keep cost also as much as down. It comes with the basic must accessories. You need to have your own cable. So distance is on your hand. Inside of the box there are connectors. Inside of the box also there are built on transformers board for each light. You need to have a controller to control this device.
Our Ebay Store www.ebay.com/str/IOTelectronic Our Amazon Store www.amazon.com/s?me=A2I1O5EIV...
I'm not sure if this response was meant for me regarding the 4 way intersection?
@@babalotwalo6754 you can program this www.amazon.com/IOT-Electronic-Channel-Compatible-Raspberry/dp/B084BMZ5SJ/ref=sr_1_25?m=A2I1O5EIVJM4D4&marketplaceID=ATVPDKIKX0DER&qid=1647710578&s=merchant-items&sr=1-25
Hi, do you have an email we can communicate through? I'd like more guidance on the application of your products.
Please let me know here what kind of support you need. If I write my email address is here, i will get so much junk email I am so sorry :((
@@IOTmug It's perfectly fine, I understand. I would like to find out if I can use the wifi traffic controller to manage a 4 way intersection? Also, where would the relay be placed if this setup can be done? Maybe a video can help me get the idea in motion