Drop the music and do some naration on progress , don't need drama .
@sweazzy82674 күн бұрын
Do you have a update ? They still work ? And you have a new link to the exact same brand name ?
@Average12126 күн бұрын
That sandblasting made it at least 15hp cleaner. Looking good.
@michaelbrinks80896 күн бұрын
I would consider buying that bike. If it had been carbureted & a rear shock/soft tail. The ABS & fuel injection is just expensive practically useless over kill. The rear cylinder is going to wear much faster from lack of airflow. I would add an air scoop or electric cooling fan to the rear cyl if the alternator can handle it. I wonder how long the fuel injection parts will last...All those extra FI parts to replace 1 part/the carburetor...Fuel pump, return lines, injector, ecm, sensors,etc... With no performance increase over a well tuned carburetor. Great job on the build & looks.
@thelostvisuals7 күн бұрын
Awesome flick dude. Absolutely love this build, cheeky blue fd in the workshop ❤
@ultramaximusreviews7 күн бұрын
Looking good - did you adjust the exhaust at all or does it sound the same?
@ultramaximusreviews7 күн бұрын
You should put the Chinese symbol for soup on the sides of the tank
@daveogle36148 күн бұрын
Outstanding! Live the dream young man
@paulratcliffe82559 күн бұрын
Sorry I'm late to the party. This build is aces man,fantastic job. Love it.
@michaelart806410 күн бұрын
How I wish I had that bike. 😎😎😎
@AMCguy10 күн бұрын
Love this build
@TheFastrider7611 күн бұрын
And to think I just watched 2.5 years of footage in 30 min..... you're a wizard mate! Amazing work!
@1989Rangerxlt13 күн бұрын
5yrs old still awesome work.
@Happy357mag13 күн бұрын
At 1:56, you said that cable ties are holding the heat shield on, but you were pointing to the Hose clamp. Am I missing something? That's how heat shields are attached Harley...
@carloscornalo13 күн бұрын
Excelente proyecto. Excelente edición. Muchísimas horas de trabajo. Felicitaciones!!
@willtang-vy5zl16 күн бұрын
cool
@TRipleJP9319 күн бұрын
Bike looks great. My only complaint is the exhaust pipe being lower than the skid plate/frame.. For a dirt bike that's not very normal.
@dogrjohn21 күн бұрын
Could you tell me where you've order the bike, I've been searching but...Thanks ahead
@phillipsharpe645921 күн бұрын
That is stunning, well done that man, respect, 😁👍
@sriyanihettiarachchi99721 күн бұрын
Absolute genius
@john-boywalton295423 күн бұрын
Ich freue mich schon drauf,wenn die Garantie abgelaufen ist und man bedenkenlos rumschrauben und umbauen kann😉
@viliambu281024 күн бұрын
Looks amazing !! From where you bought them ?
@webbwalle24 күн бұрын
Nice!
@stevethistle797427 күн бұрын
thats a beautiful bike !!
@danielriv453227 күн бұрын
❤❤❤ASI SE HACE ❤❤❤
@thomashall-qd2os28 күн бұрын
Great job! I learned a few things too.
@user-ry8lw5wc3g29 күн бұрын
I like it ❤❤❤❤❤❤❤❤
@thaminduliyanage29 күн бұрын
What a gorgeous build ❤
@jsemtp2005Ай бұрын
Is the USB under the seat standard or did you at and how?
@nvrmind3142Ай бұрын
What are you welding with? Looks like a tig head, but I don't see you feeding any rod?
@leudyfАй бұрын
Hello! Where can I find the Book you are using? Greeting from Germany 🇩🇪
@fran.lorenzoАй бұрын
Espectacular work and video.
@user-ms6nh7ji5pАй бұрын
good job👍😄
@googlelimp9834Ай бұрын
im sory good job loveit but the rear wheel makes it looks so shit miss match wheels sorry
@livingthedreambuildingthedreamАй бұрын
She is lovely.
@connorstansfield6461Ай бұрын
Incredible build! I only wanted to see more of it finished at the end! What a tease!
@alfredoalfieri9472Ай бұрын
Ottimo lavoro , Che ruota hai usato per il postreriore ?
@captain_woozeroАй бұрын
Tell me your helmet information
@markwilliams9793Ай бұрын
Skills and content have improved dramatically over the years, well done.
@FieltromАй бұрын
Rubber the battery hole. Stop it slapping and some contact protection.
@jishhАй бұрын
Yeah i have a liner ill put in later on down the road
@axelsnipergarage3139Ай бұрын
FUCK YEAHHHH!!!!!!!!
@albegt98Ай бұрын
👍💪
@bake162Ай бұрын
How did you get powder coat to stick to JB Weld?
@jishhАй бұрын
By using it lightly. Its a myth that it wont grab onto the power coat
@MugmrgnАй бұрын
✨️rejuvenation✨️
@flatoutxr6Ай бұрын
Looking good Jish, gloss always looks better, look forward to your next upload
@jishhАй бұрын
Thanks man! its always bugged me since having it done all those years ago. But glad its finally gleaming!
@BrickHouseBuildsАй бұрын
Well I have that same desk and love it but had no idea it could lift that much lol. That scene had me rolling! Looking forward to the re-build!
@jishhАй бұрын
The desk is hench! all I wanted to do was sing " you raise me up" hahaha!
@BrickHouseBuildsАй бұрын
First!
@paulbehrens5842Ай бұрын
Stalker!
@BrickHouseBuildsАй бұрын
@@paulbehrens5842 🤣🤣
@Scrambler_47Ай бұрын
looks amazing. take one minute and check what i did in my scrambler exhaust.
Пікірлер
Sick
Drop the music and do some naration on progress , don't need drama .
Do you have a update ? They still work ? And you have a new link to the exact same brand name ?
That sandblasting made it at least 15hp cleaner. Looking good.
I would consider buying that bike. If it had been carbureted & a rear shock/soft tail. The ABS & fuel injection is just expensive practically useless over kill. The rear cylinder is going to wear much faster from lack of airflow. I would add an air scoop or electric cooling fan to the rear cyl if the alternator can handle it. I wonder how long the fuel injection parts will last...All those extra FI parts to replace 1 part/the carburetor...Fuel pump, return lines, injector, ecm, sensors,etc... With no performance increase over a well tuned carburetor. Great job on the build & looks.
Awesome flick dude. Absolutely love this build, cheeky blue fd in the workshop ❤
Looking good - did you adjust the exhaust at all or does it sound the same?
You should put the Chinese symbol for soup on the sides of the tank
Outstanding! Live the dream young man
Sorry I'm late to the party. This build is aces man,fantastic job. Love it.
How I wish I had that bike. 😎😎😎
Love this build
And to think I just watched 2.5 years of footage in 30 min..... you're a wizard mate! Amazing work!
5yrs old still awesome work.
At 1:56, you said that cable ties are holding the heat shield on, but you were pointing to the Hose clamp. Am I missing something? That's how heat shields are attached Harley...
Excelente proyecto. Excelente edición. Muchísimas horas de trabajo. Felicitaciones!!
cool
Bike looks great. My only complaint is the exhaust pipe being lower than the skid plate/frame.. For a dirt bike that's not very normal.
Could you tell me where you've order the bike, I've been searching but...Thanks ahead
That is stunning, well done that man, respect, 😁👍
Absolute genius
Ich freue mich schon drauf,wenn die Garantie abgelaufen ist und man bedenkenlos rumschrauben und umbauen kann😉
Looks amazing !! From where you bought them ?
Nice!
thats a beautiful bike !!
❤❤❤ASI SE HACE ❤❤❤
Great job! I learned a few things too.
I like it ❤❤❤❤❤❤❤❤
What a gorgeous build ❤
Is the USB under the seat standard or did you at and how?
What are you welding with? Looks like a tig head, but I don't see you feeding any rod?
Hello! Where can I find the Book you are using? Greeting from Germany 🇩🇪
Espectacular work and video.
good job👍😄
im sory good job loveit but the rear wheel makes it looks so shit miss match wheels sorry
She is lovely.
Incredible build! I only wanted to see more of it finished at the end! What a tease!
Ottimo lavoro , Che ruota hai usato per il postreriore ?
Tell me your helmet information
Skills and content have improved dramatically over the years, well done.
Rubber the battery hole. Stop it slapping and some contact protection.
Yeah i have a liner ill put in later on down the road
FUCK YEAHHHH!!!!!!!!
👍💪
How did you get powder coat to stick to JB Weld?
By using it lightly. Its a myth that it wont grab onto the power coat
✨️rejuvenation✨️
Looking good Jish, gloss always looks better, look forward to your next upload
Thanks man! its always bugged me since having it done all those years ago. But glad its finally gleaming!
Well I have that same desk and love it but had no idea it could lift that much lol. That scene had me rolling! Looking forward to the re-build!
The desk is hench! all I wanted to do was sing " you raise me up" hahaha!
First!
Stalker!
@@paulbehrens5842 🤣🤣
looks amazing. take one minute and check what i did in my scrambler exhaust.
Veldig fint arbeid