Пікірлер

• 
  @TripodStudios124 күн бұрын

  nameing it Dalek Sigma didnt age well -w-"

• 
  @michaellawson21685 күн бұрын

  Amazing work! Thank you for sharing.

• 
  @TheDradge16 күн бұрын

  Brilliant job! Well done!

• 
  @andynguyen671427 күн бұрын

  Make this b&w

• 
  @I.do.edits-28 күн бұрын

  I’m sorry but the fact it’s called sigma had my friend rolling and I did the sigma face💀but very nice dalek

• 
  @YellowBagel_YTАй бұрын

  You can do this on the new gold one aswell

• 
  @videogameguy1988Ай бұрын

  I just ordered one of these as they are back in stock….stocked it has secret settings and can’t wait to play with them

• 
  @wafflechips3252 ай бұрын

  sigma

• 
  @whalemender97432 ай бұрын

  how much did this cost it must have cost a fortune

• 
  @4lphab3t432 ай бұрын

  I'm the TNG Redshirt at 2:44! Got some great footage of the Daleks both at that con and just now at May MCM 2024!

• 
  @billyberry-rf5yu2 ай бұрын

  I want one

• 
  @zacclifford34193 ай бұрын

  Just got mine today and I love it, it’s so cool they included a green setting for the 11th doctor, a yellow one (with the analysing sound) for 13 and a red setting for the war doctor

• 
  @matheusflores6193 ай бұрын

  Did you get the limited edition one or the retail one?

• 
  @zacclifford34193 ай бұрын

  @@matheusflores619 the limited edition one, but I also have the retail one as well

• 
  @matheusflores6193 ай бұрын

  @@zacclifford3419 Yeah, apparently the retail one doesn't have the secret switch, even though it has the different colour LEDs

• 
  @ep80293 ай бұрын

  Great dalek. Well done.

• 
  @breadboxish3 ай бұрын

  Thanks for doing this! I got to see some of your guys work in St. Louis a while ago. I’ve been making screwdrivers obsessively since. Very cool!

• 
  @whovisionsCGI3 ай бұрын

  Very Nice build. I built a Genesis Dalek about 14 years back, but eventually had to sell it due to moving and not having the space. So now I build Virtual CGI Daleks instead. Love your Sixties build. Very good quality, you obviously put a lot of time and love into it, and it shows.

• 
  @voyagesfanfilm3 ай бұрын

  The work that goes into these is stellar. They look absolutely incredible! :D

• 
  @BillSmithson-ir9fi3 ай бұрын

  Does this work wity the retail version I can't seem to access it

• 
  @matheusflores6193 ай бұрын

  Yeah, I don't think so, there's no button

• 
  @neilwright6163 ай бұрын

  Loved this! Hoping my Pertwee MK3 is in this batch 🤞 The work you and the team do is first class

• 
  @tidmouthmilk123 ай бұрын

  Love these prop builds. They look so good! If I ever get around to doing a Fifth Doctor cosplay I'll absolutely have to order one of these to go with it! Also, have you considered doing one the original prop that Pertwee's screwdriver was built from? (i.e. the screwdriver prop from Thunderbirds Are GO!) I appreciate that one is a lot more niche and not as iconic but it'd be interesting to see it in the line up alongside it's Doctor Who counterparts.

• 
  @HALFDEAD663 ай бұрын

  Is there a way to Buy One or Two of these completed and finished?

• 
  @jamesmatthews64773 ай бұрын

  Great video and really informative and interesting to see! Cheers!

• 
  @pauls.75303 ай бұрын

  That was fun to watch. Do any of the original screwdriver props still exist?

• 
  @ScarecrowProps3 ай бұрын

  The Original Romana Sonic Screwdriver is currently the oldest known surviving sonic prop, the TV Movie 7th/8th Sonic is currently the oldest known Doctor used Sonic Screwdriver to still exist. Everything else is missing from the classic era new series wise most of them are still around.

• 
  @CGRREDACTED3 ай бұрын

  As a fan of classic Doctor Who I must say they look beautiful however why would you not paint those details surely the tape will come up at some point I mean it's Kate it's not meant to be permanent but they do look gorgeous especially I made Tom Baker Sonic screwdriver guy. Very nice work good job.

• 
  @ScarecrowProps3 ай бұрын

  We’ve just been faithful to the way the original prop was made. Where it used Tape, we used tape, without that it loses a certain charm the original had.

• 
  @CGRREDACTED3 ай бұрын

  @@ScarecrowProps ohh well it wasn't a slight hello I was just curious why you use tape if they use tape then OK you use tape it looks great nonetheless but if it's gonna be handled by somebody and not just sit on the shelf and then you just might want to use something that preserves it better but that's just an opinion you still do great work so know that at least

• 
  @ScarecrowProps3 ай бұрын

  @@CGRREDACTEDI didn’t take it as a slight don’t worry! Just keen to explain why we went that way, and yes very true, although paint will also wear down over time, tape is at least easier to replace if it was to come loose, but we haven’t had any come back yet, so they’ve got a decent life in them! But I do see your point.

• 
  @XMetalMatter4 ай бұрын

  I wish I had one.

• 
  @101shapshifter4 ай бұрын

  The two dream cosplays I want to do is a Dalek and the Power armor from Fallout

• 
  @leeknapp38034 ай бұрын

  Where did you get the dome lenses from?

• 
  @madcatmk2134 ай бұрын

  "i like latte" HAHHA

• 
  @sophieyatestakesontheworld4 ай бұрын

  making the motorization by using an electric wheelchair is genius! how difficult was it to incorporate that into the dalek compared to using something else?

• 
  @spiralfirst64885 ай бұрын

  Nicely done. I've genuinely never watched Dr Who but I've always wanted a full size dalek and tardis.

• 
  @tommyfox8545 ай бұрын

  Man that looks like so much fun roamin round a huge building in a Dalek casing. =) Hmm. . I wonder, does someone need to be a member of this project in order to do this or no? I'm askin cause I have a Dalek casing idea in mind and I want to glide around in a Comic Con convention in it one day. . . soo, uuhh. . yeah. =P

• 
  @Arcadi4.445 ай бұрын

  That screwdriver toy and the actual prop are way cooler than any other sonic design, especially 15's

• 
  @DalekDecimus6 ай бұрын

  This was fun!

• 
  @jiminnorthdallas12276 ай бұрын

  Is this a newer issue? I got mine recently and it doesn’t have that micro switch. ☹️

• 
  @matheusflores6193 ай бұрын

  Same here

• 
  @mispinchergamings34706 ай бұрын

  5:05 I say um ok back off dude

• 
  @marcse7en6 ай бұрын

  That is a BEAUTIFUL object! ... So much better than those daft "Brass Daleks," or those stupid multi-coloured "hump-backed" monstrosities! ... The old Daleks are best!

• 
  @Noahdoesdrums6 ай бұрын

  I like the fact that it has red green and yellow, it let's think that you can be alot of different doctors just with a different stylev

• 
  @ravenb30486 ай бұрын

  I have to say, that is one -beautiful- efficient Dalek design.

• 
  @robertcozby71976 ай бұрын

  Odd, mine isn't switching

• 
  @georgeknox18227 ай бұрын

  Seriously impressive work . Looks incredible . ❤

• 
  @Seppppy387 ай бұрын

  I wanna make one but I need plans I can do it off looking at the thing

• 
  @emperordalek1027 ай бұрын

  hi just wondering can i make a video reaction ill credit you in the description

• 
  @garrenreaload43448 ай бұрын

  how did you clone the daleks😁

• 
  @cartoonfan9598 ай бұрын

  funtastic

• 
  @zacharymiller9628 ай бұрын

  Mine doesnt have the switch

• 
  @whopropsmodels97108 ай бұрын

  The standard editions don't have the microswitch on the bottom I'm afraid, that was something specific to the Online Exclusive release.

• 
  @zacharymiller9628 ай бұрын

  @@whopropsmodels9710 dang. I preordered from the whoshop in london

• 
  @youvebeengnomeed8 ай бұрын

  was it hot in there

• 
  @ShadowMoon14128 ай бұрын

  They should redo the other screwdrivers

• 
  @briandaleske51398 ай бұрын

  I think the next color of the (SonicScrewdriver) should, be fluorescent purple colored, or Neon Light-Purple. There has already been colors, of light-blue, light-green, yellow, white, light-orange, and light-red.

• 
  @TrackMaster8448 ай бұрын

  Always wanted to build my own Dalek. I lack the skills and tools to do so tho Xp

• 
  @cameronreid12968 ай бұрын

  I can’t get mine to change colour and the sound is really crackly😊

• 
  @thetardis_is_the_universe45118 ай бұрын

  What dose the box look like when you opened it