@@KenBarberGeek nothing wakes you up better than hugging a tree, involuntarily 🤣
@alexxbadea2 ай бұрын
Do you know if it has the same mount as the e5000?
@managerworking3 ай бұрын
Just to get to sensor connection then replace it if error W101 occurs it seems like on Bianchi as well I’d have to drop motor like this too. Any ideas how long you took to yours please?
@suspensioncheck3 ай бұрын
1h30min first time I think, 40min if you know what you're doing and done it before.
@69indigoblue5 ай бұрын
Well done, very helpful - thank you!
@adriankurz53857 ай бұрын
My Orbea Rise seems to have a chain ring of 50mm, so a 44 16 notch bottom bracket tool doesn't fit. do you know how the proper tool for it is called?
@suspensioncheck7 ай бұрын
Not sure Adrian, seems strange they used a different chain ring size. Is it bought in Europe during 2021?
@adriankurz53857 ай бұрын
@@suspensioncheck I was just too stupid to watch the video properly. It's actually the TL-FC39 Tool from Shimano and it fits, just that it is not 44mm, at least not the part which goes on the chain ring.
@rwent19 ай бұрын
Nice video! I'll definately bookmark this for reference. Shame the auto-focus kept blurring the image. Can you lock the focus on future videos?
@suspensioncheck9 ай бұрын
Agree, sorry about that. To be honest it was my 1st 'how to' kinda video done :)
@harkat1610 ай бұрын
What camera do you film with?
@suspensioncheck10 ай бұрын
Gopro 9
@teabagNBG11 ай бұрын
i got a 2023 model... i got me the tools wich it say in the bluepaper... tl-fc33 + tl-fc39... BOTH of them dont fit!!! after looking online for a while i found a installation guide for the cranks only... inside the manual it says use TL-FC430... from looking at it, it seem like it should fit... but im not sure u also use a total differnt one???
@suspensioncheck11 ай бұрын
I used tl-fc33 and my one was 2021, not sure about 2023.
@xav_1029 Жыл бұрын
How long did it take all in? Thinking about shipping battery so I can bring my bike on a trip
@suspensioncheck Жыл бұрын
First time 50 min then 1h 10 min because some inner bushings (in-between frame & motor) were always falling in frame. If you know what to do and did it before you could do it in 20 min
@terryryan988 Жыл бұрын
Not very good. Don't understand his English. Seems like he has never done it before.
@suspensioncheck Жыл бұрын
Even so, it has helped a good few lads but you can make a better video lad.
@rafagustav1843 Жыл бұрын
Easy to remove the motor,putting it back is very difficult to line up mounting holes,does anyone here know the tap size of the motor mount? I need to clean one of the theaded holes!
@suspensioncheck Жыл бұрын
Yes, I struggled with that a good bit because washers were keep falling
@mtbene7918 Жыл бұрын
Great video!! will be really helpful since i need to remove the battery for shipping. Do you know the length of the battery?
@suspensioncheck Жыл бұрын
Glad to hear it helps! Didn't get the measurements but it's significantly smaller than a bosch 625wh, maybe 35cm long?
@mtbene7918 Жыл бұрын
@@suspensioncheck great! Thanks :)
@jokermtb Жыл бұрын
I was told the battery was permanently installed in the Rise - seems that it can be removed and replaced if necessary! thanks for this video.
@suspensioncheck Жыл бұрын
It can definitely be removed & replaced, you'd just need a few tricky tools and a bit of time but at least it's doable! Glad it helps.
@laseryt9180 Жыл бұрын
Cool i hope someday i will be like you a mountain bikers
@suspensioncheck Жыл бұрын
Of course you will! Where are you based and what age?
@testtesttesttesttest884 Жыл бұрын
Hey dude, I don’t use your torque wrench for anything other than torquing
@matthewwilson-uw6wb Жыл бұрын
Hi have you hot a link to the tool tl-fc 39 thanks
@TWARDOWSKY. Жыл бұрын
Yes after 8-10 years you Can charge is ok.
@Gerald-iz7mv Жыл бұрын
how much would a bike shop charge for battery removal?
@suspensioncheck Жыл бұрын
Have no idea but if I was a shop in Dublin I'd need to charge 150-200 euro probably as there's all kinds of expenses, tools, rent, employees, insurances and profit. It's an hour of work for someone that has done this before.
@PabloH Жыл бұрын
thanks for sharing the video... big help. question: where did you get the motor frame protector?
@suspensioncheck Жыл бұрын
So happy it helps! It's my 1st how to kinda video so there's plenty to learn. Motor guard is from Rockguards, comes from UK I think and it's about 50e.
@jBr1o6 Жыл бұрын
Hello, where can I buy the carbon engine guard, is there a link?😀🤩 thanks for your help
@suspensioncheck Жыл бұрын
Hi, it is from Rockguards you can get it from link below. It is not very strong like amygos but weights ~50 grams. I am happy with it to be honest and would buy it again or fix it with resin if it breaks, smashed it a couple of times in rocks and it held up but sometimes you only need one hit to break it. rockguardz.com/ www.amygos.fr/
@tw1npe4ks Жыл бұрын
How to remove chainring locknut? Chainring keeps spinning with motor when trying to remove it? Does the chain need to be on? I have Rise H.
@suspensioncheck Жыл бұрын
min 3:30. Block the wheel somehow I'd say if it's very tight, with chain on.
@dongkapuyawn5107 Жыл бұрын
i wonder why there's so much dirt inside when the motor has a cover. now would be a good time to check the wires for any issue and clean the underbelly. at 10:06, where did those spacers come from? Very good tutorial video!
@suspensioncheck Жыл бұрын
There'll be dust, water going from the headset or cable holes but I wouldn't worry about that. Spacers are in-between the motor and frame (for the screws holding the motor). Thx!
@jackmowatt3765 Жыл бұрын
no need to pull cranks !! a cut off 6mm allen wrench will work to remove those two bolts that are hard to get at , no problem , easy motor drop, orbea rise ep8 rs motor
@suspensioncheck Жыл бұрын
Oh yeah, I've done it same way too but preffer to torque the screw. Another thing is I like to inspect my motor spindle when I remove the cranks.
@ibcrypto6139 Жыл бұрын
Curious, was this done because the internal female thread stripped that holds the water bottle cage/battery extender bracket? I have the Hydro and now concerned that one needs to be carful with those threads. Thanks for posting!
@suspensioncheck Жыл бұрын
The screws got stripped actually so the male. The original screws are famous for getting stripped... I used stripped screw removal bits and was able to remove one but the other one couldn't get it out even with a drill.
@ibcrypto6139 Жыл бұрын
@@suspensioncheck Thanks! I just bought the H30 and will be extra carful when I touch those screws!
@Liisjak Жыл бұрын
I'm torn if I should get an M10 for 6k eu on sale...but I'd like to see what's comming in 2023.
@suspensioncheck Жыл бұрын
The enjoyment it brings it's worth paying for it even if you decide to sell and get something else. Any ebike would be amazing.
@DG77b Жыл бұрын
Nice video. Thanks for sharing. I want to make the same settings suspension but i want to stay in 29ers. Do you think that it will be ok or not? Second question.. whats the sensations with 170 front and 140 rear? Thanks
@suspensioncheck Жыл бұрын
Hi Diego, I think it will be ok, I haven't even tried the 29er on the back because I really like jumping & steep sections and a 29er is not that fun on the back, especially on tight switchbacks. I broke already an Orbea Rise frame, I wouldn't go with a ZEB and I would go with 160mm if I was to choose again. It's better to keep the axle-to-crown shorter and ZEB has a big crown. The back is really progressive, never felt a bottom out, even with 140mm. I actually got used with 140mm on the back but when I put the 160mm it just felt more plush, I could get away with more.
@patrikszakowski802 Жыл бұрын
great !!! have to reposition the outer shell for my new fox kashima seat post and yes, but yes, the motor and battery have to be removed because the outer shell cannot be pushed in any further.
@patrikszakowski802 Жыл бұрын
Hello, I have a question if I turn the bike upside down, do the sockets remain in place and if I remove the battery and motor, it's a new bike
@suspensioncheck Жыл бұрын
Hi Patrik, everything stays in place if you turn the bike upside down. You can remove the battery and motor but you won't be able to ride it as cranks are being held by the motor. If you look for a bike where you can do that search for a bike with Fazua motor.
@patrikszakowski802 Жыл бұрын
@@suspensioncheck great !!! have to reposition the outer shell for my new fox kashima seat post and yes, but yes, the motor and battery have to be removed because the outer shell cannot be pushed in any further.
@IDoBlues Жыл бұрын
Did you end up putting on the EXT shock? Any issues with the coil rubbing the frame in compression? I'm looking to do a similar conversion with an EXT E-Storia.
@suspensioncheck Жыл бұрын
Yes, I have it since dec-jan. It does rub but only slightly and under full compression, I bottomed out a couple times and it's still fine, it just took a tiny tiny bit of paint.
@erwinko Жыл бұрын
In October I am going to get my rise in the same color as yours .. Looking forward riding it
@ray_fmtb6551 Жыл бұрын
Credit to trail breaker these look amazing but please for the love of god stop grabbing a handful of rear brake coming into every berm or they will be destroyed in no time 👍🏻
@joseazurara3245 Жыл бұрын
Good video. Thanks. Why did you remove the battery.
@suspensioncheck Жыл бұрын
Cheers, I had to replace the metal plate where the screws for the battery cage / bottle holder screws into
@eslstinkt Жыл бұрын
how much does your bike weigh?
@suspensioncheck Жыл бұрын
20.5kg mullet with zeb & ext coil, without extender
@tonwhelan Жыл бұрын
Man where is that trail at 5:51? It looks incredible.
@suspensioncheck Жыл бұрын
It actually is one of the best trails I've seen in Ireland. It's in Carrick near the top off the main climb.
@tonwhelan Жыл бұрын
@@suspensioncheck Cheers man. Been to Carrick and never did this one, will have to get back. Do you know what it's called?
@suspensioncheck Жыл бұрын
@@tonwhelan It's called E - Gravity Enduro Stage 2 '21 (ebike segment), you have to do it! www.strava.com/activities/6986276402/segments/2950073911551534890 kzread.info/dash/bejne/jHWXwbGoYd2zcqQ.html (Someone else doing it last year)
@TeamCykelhold Жыл бұрын
I think it's a lot easier to work on the motor with the bike simply being turned around on it's head. That way you also do not risk it falling down, pulling the wires.
@dongkapuyawn5107 Жыл бұрын
good point
@fullsendmtb Жыл бұрын
Nice Video! I am new to youtube and wondering if you have any feedback for me? Thank you so much.!
@suspensioncheck Жыл бұрын
Cheers lad, I should be asking that. You have 1k subscribers so you're either doing something right or you bought fake ones? 😅 Watched a few of your vids, nice riding! Try use a wider setting and use a chin mount. Not sure what gopro u have but a newer than 8 should do well.
@mossy.trails5289 Жыл бұрын
Those trails look sick \m/. Looks like perfect Rise terrain. Just this week got myself a H30 which i'm in the process of upgrading, including a mullet conversion. Cannot wait to get out on it.
@suspensioncheck Жыл бұрын
Lovely bike, you'll enjoy it for sure! Get the range extender for those quick rides on turbo.
@ShutUpSceneKid692 жыл бұрын
Looks awesome. Where is this located? Hope dude that wiped is okay after the ride!
@suspensioncheck2 жыл бұрын
You can park here beside the biking.ie cabin and you'd be right beside the trails: goo.gl/maps/erSHYQiB7wd8MKuD6 Yeah .. he was alright after, it's always a good day when we don't end up in the hospital 😅 On a ride in Laragh we had 2 lads breaking their hand & leg 🤕
@mariewithane-mtb19912 жыл бұрын
Did I just witness Chaz walking down a chute with his bike on KZread?????!!!!!!! 😱
@suspensioncheck2 жыл бұрын
He will forever be in KZread's Hall of Shame 🤣
@ChazFMTBChronicles2 жыл бұрын
Naturally, obviously that was CGI, there's literally no way that happened.
@mariewithane-mtb19912 жыл бұрын
@@suspensioncheck in the hall of shame for the walk of shame 🤪
@mariewithane-mtb19912 жыл бұрын
@@ChazFMTBChronicles oh of course, CGI, I should have known 😂
@suspensioncheck2 жыл бұрын
@@ChazFMTBChronicles put it in the description to make it easier to be found as well 😅
@jollyroger59992 жыл бұрын
Great video. Have you guys been over to Coolaney in Sligo yet? I believe they are currently in the process of building Irelands biggest downhill trail. Should be epic. Also Blessingbourne in Tyrone is decent, just no real elevation. Ps I've subscribed. Keep the cool vids coming 🤘
@suspensioncheck2 жыл бұрын
Thanks, haven't been to those places yet, hopefully I'll check them out. At the moment we're planning a trip to Bike Park Wales and at some point in the distant future Morzine :)
@andrewgavin51912 жыл бұрын
Subscribed
@clipsclips85262 жыл бұрын
are they the ones in wicklow or kildare
@suspensioncheck2 жыл бұрын
This is in Wicklow, place is called Djouce
@theedmondsept2 жыл бұрын
I've been running this set up since June 2021, and I love the new geometry, it makes this bike enduro capable kzread.info/dash/bejne/n3x7rbGhhJrZm7Q.html
@thefunkytupac75072 жыл бұрын
Have you got a link to your strava on this day 😍😍😍 those trails are 👌
@suspensioncheck2 жыл бұрын
They are for sure!🥰 See if this is working, think you have to be logged in: www.strava.com/activities/5835583383
@tw1npe4ks2 жыл бұрын
What are the fork and shock travel?
@suspensioncheck2 жыл бұрын
162mm rear EXT, 170mm front ZEB
@edgardomunoz66112 жыл бұрын
How do you keep the bushings from falling off while replacing the motor?
@suspensioncheck2 жыл бұрын
It was so difficult and I struggled a lot without other tools. In the end I gave up and brought the bearing puller set. I used the inner tool from the set to hold the bushings in position while I put the motor in with the bike upside down.
@suspensioncheck2 жыл бұрын
Used this www.wish.com/product/5d36e141c17c846cba7d7571?from_ad=goog_shopping&_display_country_code=IE&_force_currency_code=EUR&pid=googleadwords_int&c=16496595486&ad_cid=5d36e141c17c846cba7d7571&ad_cc=IE&ad_curr=EUR&ad_price=43.00&campaign_id=16496595486&retargeting=true&exclude_install=true&gclid=Cj0KCQjw-pCVBhCFARIsAGMxhAcU2_ICnpcyHptIp9P7rsp5a8wY6QasI4k7fg_DRaX79y4fvnjKGhIaAgC3EALw_wcB&hide_login_modal=true&share=mobileweb
@julianszenogrady2 жыл бұрын
Thanks for the video! Reg. the two bushings, mine came without o-rings… I‘ve added these now but found it pretty easy to re-install the motor, because the bushings somehow „pop“ into the frame and stay there. I‘ve just inserted the two concerned motor bolts half-way and these held the bushings in place while wiggling the motor in. I am asking just out of curiosity what the challenges were, why the tool is needed…? 😊
@fpamps58052 жыл бұрын
Thank you!
@awils0272 жыл бұрын
If you want a real review of the orbea rise then go to trust pilot and read the reviews. The company is terrible. I bought an orbea rise and 3 months later the frame snapped. Orbea are terrible with customer service, immediately offered a crash replacement for £££ and won’t honour the ‘lifetime warranty’
@suspensioncheck2 жыл бұрын
In what spot it broke and did you hit it? I broke the frame at the headtube and paid for crash replacement warranty 900e. In fairness it was a very brutal impact that I'm not sure many bikes would've survived.
@awils0272 жыл бұрын
@@suspensioncheck no impact, I was riding down a peaty footpath. It’s broken on the seat tube and chainstay on the drive side, maybe 6 inches above the lower bearings
@chrisjones66992 жыл бұрын
Good to see the battery removal, thank you. Just a tip though, if you do this with your Rise upside down, the motor won’t drop and it makes it a million times easier to reinstall everything 👍🏻
@suspensioncheck2 жыл бұрын
Cheers Chris, the reason I've done this is because my bushings are not staying put as I've replaced the frame. So they would fall into the frame, especially when reinstalling everything.
@richardoates43352 жыл бұрын
Thanks for the tutorial. What downtube protector is that? Looks great!
@suspensioncheck2 жыл бұрын
Thanks Richard! That's the carbon Rockguardz protector, was about 50 quid and it held through some serious impacts.
Пікірлер
brilliant, looks rough as hell lol
@@KenBarberGeek nothing wakes you up better than hugging a tree, involuntarily 🤣
Do you know if it has the same mount as the e5000?
Just to get to sensor connection then replace it if error W101 occurs it seems like on Bianchi as well I’d have to drop motor like this too. Any ideas how long you took to yours please?
1h30min first time I think, 40min if you know what you're doing and done it before.
Well done, very helpful - thank you!
My Orbea Rise seems to have a chain ring of 50mm, so a 44 16 notch bottom bracket tool doesn't fit. do you know how the proper tool for it is called?
Not sure Adrian, seems strange they used a different chain ring size. Is it bought in Europe during 2021?
@@suspensioncheck I was just too stupid to watch the video properly. It's actually the TL-FC39 Tool from Shimano and it fits, just that it is not 44mm, at least not the part which goes on the chain ring.
Nice video! I'll definately bookmark this for reference. Shame the auto-focus kept blurring the image. Can you lock the focus on future videos?
Agree, sorry about that. To be honest it was my 1st 'how to' kinda video done :)
What camera do you film with?
Gopro 9
i got a 2023 model... i got me the tools wich it say in the bluepaper... tl-fc33 + tl-fc39... BOTH of them dont fit!!! after looking online for a while i found a installation guide for the cranks only... inside the manual it says use TL-FC430... from looking at it, it seem like it should fit... but im not sure u also use a total differnt one???
I used tl-fc33 and my one was 2021, not sure about 2023.
How long did it take all in? Thinking about shipping battery so I can bring my bike on a trip
First time 50 min then 1h 10 min because some inner bushings (in-between frame & motor) were always falling in frame. If you know what to do and did it before you could do it in 20 min
Not very good. Don't understand his English. Seems like he has never done it before.
Even so, it has helped a good few lads but you can make a better video lad.
Easy to remove the motor,putting it back is very difficult to line up mounting holes,does anyone here know the tap size of the motor mount? I need to clean one of the theaded holes!
Yes, I struggled with that a good bit because washers were keep falling
Great video!! will be really helpful since i need to remove the battery for shipping. Do you know the length of the battery?
Glad to hear it helps! Didn't get the measurements but it's significantly smaller than a bosch 625wh, maybe 35cm long?
@@suspensioncheck great! Thanks :)
I was told the battery was permanently installed in the Rise - seems that it can be removed and replaced if necessary! thanks for this video.
It can definitely be removed & replaced, you'd just need a few tricky tools and a bit of time but at least it's doable! Glad it helps.
Cool i hope someday i will be like you a mountain bikers
Of course you will! Where are you based and what age?
Hey dude, I don’t use your torque wrench for anything other than torquing
Hi have you hot a link to the tool tl-fc 39 thanks
Yes after 8-10 years you Can charge is ok.
how much would a bike shop charge for battery removal?
Have no idea but if I was a shop in Dublin I'd need to charge 150-200 euro probably as there's all kinds of expenses, tools, rent, employees, insurances and profit. It's an hour of work for someone that has done this before.
thanks for sharing the video... big help. question: where did you get the motor frame protector?
So happy it helps! It's my 1st how to kinda video so there's plenty to learn. Motor guard is from Rockguards, comes from UK I think and it's about 50e.
Hello, where can I buy the carbon engine guard, is there a link?😀🤩 thanks for your help
Hi, it is from Rockguards you can get it from link below. It is not very strong like amygos but weights ~50 grams. I am happy with it to be honest and would buy it again or fix it with resin if it breaks, smashed it a couple of times in rocks and it held up but sometimes you only need one hit to break it. rockguardz.com/ www.amygos.fr/
How to remove chainring locknut? Chainring keeps spinning with motor when trying to remove it? Does the chain need to be on? I have Rise H.
min 3:30. Block the wheel somehow I'd say if it's very tight, with chain on.
i wonder why there's so much dirt inside when the motor has a cover. now would be a good time to check the wires for any issue and clean the underbelly. at 10:06, where did those spacers come from? Very good tutorial video!
There'll be dust, water going from the headset or cable holes but I wouldn't worry about that. Spacers are in-between the motor and frame (for the screws holding the motor). Thx!
no need to pull cranks !! a cut off 6mm allen wrench will work to remove those two bolts that are hard to get at , no problem , easy motor drop, orbea rise ep8 rs motor
Oh yeah, I've done it same way too but preffer to torque the screw. Another thing is I like to inspect my motor spindle when I remove the cranks.
Curious, was this done because the internal female thread stripped that holds the water bottle cage/battery extender bracket? I have the Hydro and now concerned that one needs to be carful with those threads. Thanks for posting!
The screws got stripped actually so the male. The original screws are famous for getting stripped... I used stripped screw removal bits and was able to remove one but the other one couldn't get it out even with a drill.
@@suspensioncheck Thanks! I just bought the H30 and will be extra carful when I touch those screws!
I'm torn if I should get an M10 for 6k eu on sale...but I'd like to see what's comming in 2023.
The enjoyment it brings it's worth paying for it even if you decide to sell and get something else. Any ebike would be amazing.
Nice video. Thanks for sharing. I want to make the same settings suspension but i want to stay in 29ers. Do you think that it will be ok or not? Second question.. whats the sensations with 170 front and 140 rear? Thanks
Hi Diego, I think it will be ok, I haven't even tried the 29er on the back because I really like jumping & steep sections and a 29er is not that fun on the back, especially on tight switchbacks. I broke already an Orbea Rise frame, I wouldn't go with a ZEB and I would go with 160mm if I was to choose again. It's better to keep the axle-to-crown shorter and ZEB has a big crown. The back is really progressive, never felt a bottom out, even with 140mm. I actually got used with 140mm on the back but when I put the 160mm it just felt more plush, I could get away with more.
great !!! have to reposition the outer shell for my new fox kashima seat post and yes, but yes, the motor and battery have to be removed because the outer shell cannot be pushed in any further.
Hello, I have a question if I turn the bike upside down, do the sockets remain in place and if I remove the battery and motor, it's a new bike
Hi Patrik, everything stays in place if you turn the bike upside down. You can remove the battery and motor but you won't be able to ride it as cranks are being held by the motor. If you look for a bike where you can do that search for a bike with Fazua motor.
@@suspensioncheck great !!! have to reposition the outer shell for my new fox kashima seat post and yes, but yes, the motor and battery have to be removed because the outer shell cannot be pushed in any further.
Did you end up putting on the EXT shock? Any issues with the coil rubbing the frame in compression? I'm looking to do a similar conversion with an EXT E-Storia.
Yes, I have it since dec-jan. It does rub but only slightly and under full compression, I bottomed out a couple times and it's still fine, it just took a tiny tiny bit of paint.
In October I am going to get my rise in the same color as yours .. Looking forward riding it
Credit to trail breaker these look amazing but please for the love of god stop grabbing a handful of rear brake coming into every berm or they will be destroyed in no time 👍🏻
Good video. Thanks. Why did you remove the battery.
Cheers, I had to replace the metal plate where the screws for the battery cage / bottle holder screws into
how much does your bike weigh?
20.5kg mullet with zeb & ext coil, without extender
Man where is that trail at 5:51? It looks incredible.
It actually is one of the best trails I've seen in Ireland. It's in Carrick near the top off the main climb.
@@suspensioncheck Cheers man. Been to Carrick and never did this one, will have to get back. Do you know what it's called?
@@tonwhelan It's called E - Gravity Enduro Stage 2 '21 (ebike segment), you have to do it! www.strava.com/activities/6986276402/segments/2950073911551534890 kzread.info/dash/bejne/jHWXwbGoYd2zcqQ.html (Someone else doing it last year)
I think it's a lot easier to work on the motor with the bike simply being turned around on it's head. That way you also do not risk it falling down, pulling the wires.
good point
Nice Video! I am new to youtube and wondering if you have any feedback for me? Thank you so much.!
Cheers lad, I should be asking that. You have 1k subscribers so you're either doing something right or you bought fake ones? 😅 Watched a few of your vids, nice riding! Try use a wider setting and use a chin mount. Not sure what gopro u have but a newer than 8 should do well.
Those trails look sick \m/. Looks like perfect Rise terrain. Just this week got myself a H30 which i'm in the process of upgrading, including a mullet conversion. Cannot wait to get out on it.
Lovely bike, you'll enjoy it for sure! Get the range extender for those quick rides on turbo.
Looks awesome. Where is this located? Hope dude that wiped is okay after the ride!
You can park here beside the biking.ie cabin and you'd be right beside the trails: goo.gl/maps/erSHYQiB7wd8MKuD6 Yeah .. he was alright after, it's always a good day when we don't end up in the hospital 😅 On a ride in Laragh we had 2 lads breaking their hand & leg 🤕
Did I just witness Chaz walking down a chute with his bike on KZread?????!!!!!!! 😱
He will forever be in KZread's Hall of Shame 🤣
Naturally, obviously that was CGI, there's literally no way that happened.
@@suspensioncheck in the hall of shame for the walk of shame 🤪
@@ChazFMTBChronicles oh of course, CGI, I should have known 😂
@@ChazFMTBChronicles put it in the description to make it easier to be found as well 😅
Great video. Have you guys been over to Coolaney in Sligo yet? I believe they are currently in the process of building Irelands biggest downhill trail. Should be epic. Also Blessingbourne in Tyrone is decent, just no real elevation. Ps I've subscribed. Keep the cool vids coming 🤘
Thanks, haven't been to those places yet, hopefully I'll check them out. At the moment we're planning a trip to Bike Park Wales and at some point in the distant future Morzine :)
Subscribed
are they the ones in wicklow or kildare
This is in Wicklow, place is called Djouce
I've been running this set up since June 2021, and I love the new geometry, it makes this bike enduro capable kzread.info/dash/bejne/n3x7rbGhhJrZm7Q.html
Have you got a link to your strava on this day 😍😍😍 those trails are 👌
They are for sure!🥰 See if this is working, think you have to be logged in: www.strava.com/activities/5835583383
What are the fork and shock travel?
162mm rear EXT, 170mm front ZEB
How do you keep the bushings from falling off while replacing the motor?
It was so difficult and I struggled a lot without other tools. In the end I gave up and brought the bearing puller set. I used the inner tool from the set to hold the bushings in position while I put the motor in with the bike upside down.
Used this www.wish.com/product/5d36e141c17c846cba7d7571?from_ad=goog_shopping&_display_country_code=IE&_force_currency_code=EUR&pid=googleadwords_int&c=16496595486&ad_cid=5d36e141c17c846cba7d7571&ad_cc=IE&ad_curr=EUR&ad_price=43.00&campaign_id=16496595486&retargeting=true&exclude_install=true&gclid=Cj0KCQjw-pCVBhCFARIsAGMxhAcU2_ICnpcyHptIp9P7rsp5a8wY6QasI4k7fg_DRaX79y4fvnjKGhIaAgC3EALw_wcB&hide_login_modal=true&share=mobileweb
Thanks for the video! Reg. the two bushings, mine came without o-rings… I‘ve added these now but found it pretty easy to re-install the motor, because the bushings somehow „pop“ into the frame and stay there. I‘ve just inserted the two concerned motor bolts half-way and these held the bushings in place while wiggling the motor in. I am asking just out of curiosity what the challenges were, why the tool is needed…? 😊
Thank you!
If you want a real review of the orbea rise then go to trust pilot and read the reviews. The company is terrible. I bought an orbea rise and 3 months later the frame snapped. Orbea are terrible with customer service, immediately offered a crash replacement for £££ and won’t honour the ‘lifetime warranty’
In what spot it broke and did you hit it? I broke the frame at the headtube and paid for crash replacement warranty 900e. In fairness it was a very brutal impact that I'm not sure many bikes would've survived.
@@suspensioncheck no impact, I was riding down a peaty footpath. It’s broken on the seat tube and chainstay on the drive side, maybe 6 inches above the lower bearings
Good to see the battery removal, thank you. Just a tip though, if you do this with your Rise upside down, the motor won’t drop and it makes it a million times easier to reinstall everything 👍🏻
Cheers Chris, the reason I've done this is because my bushings are not staying put as I've replaced the frame. So they would fall into the frame, especially when reinstalling everything.
Thanks for the tutorial. What downtube protector is that? Looks great!
Thanks Richard! That's the carbon Rockguardz protector, was about 50 quid and it held through some serious impacts.